Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “single experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Electrokinetic Delivery of Single Fluorescent Biomolecules in Fluidic Nanochannels

We describe the fabrication of sub-100-nanometer-sized channels in a fused silica lab-on-a-chip device and experiments that demonstrate detection of single fluorescently labeled proteins in buffer solution within the device with high signal and low background. The fluorescent biomolecules are transported along the length of the nanochannels by electrophoresis and/or electro-osmosis until they pass into a two-focus laser irradiation zone. Pulse-interleaved excitation and time-resolved single-photon detection with maximum-likelihood analysis enables the location of the biomolecule to be determined. Diffusional transport of the molecules is found to be slowed within the nanochannel, and this facilitates fluidic trapping and/or prolonged measurements on individual biomolecules. Our goal is to actively control the fluidic transport to achieve rapid delivery of each new biomolecule to the sensing zone, following the completion of measurements, or the photobleaching of the prior molecule. We have used computer simulations that include photophysical effects such as triplet crossing and photobleaching of the labels to design control algorithms, which are being implemented in a custom field-programmable-gate-array circuit for the active fluidic control.

59 BASIC BIOLOGICAL SCIENCES↗

Measurement of single-target spin asymmetries in the electroproduction of negative pions in the semi-inclusive deep inelastic reaction n ↑ (e,e'π - )X on a transversely polarized 3 He target

The experiment E06010 measured the target single spin asymmetry (SSA) in the semiinclusive deep inelastic (SIDIS) n ↑ (e,e'π - )X reaction with a transversely polarized 3 He target as an e ective neutron target. This is the very rst independent measurement of the neutron SSA, following the measurements at HERMES and COMPASS on the proton and the deuteron. The experiment acquired data in Hall A at Je erson Laboratory with a continuous electron beam of energy 5.9 GeV, probing the valence quark region, with x = 0.13 → 0.41, at Q 2 = 1.31 → 3.1 GeV 2 . The two contributing mechanisms to the measured asymmetry, viz, the Collins effect and the Sivers effect can be realized through the variation of the asymmetry as a function of the Collins and Sivers angles. The neutron Collins and Sivers moments, associated with the azimuthal angular modulations, are extracted from the measured asymmetry for the very first time and are presented in this thesis. The kinematics of this experiment is comparable to the HERMES proton measurement. However, the COMPASS measurements on deuteron and proton are in the low-x region. The results of this experiment are crucial as the first step toward the extraction of quark transversity and Sivers distribution functions in SIDIS. With the existing results on proton and deuteron, these new results on neutron will provide powerful constraints on the transversity and Sivers distributions of both the u and d-quarks in the valence region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Preventing Thin Film Dewetting via Graphene Capping

A monolayer 2D capping layer with high Young's modulus is shown to be able to effectively suppress the dewetting of underlying thin films of small organic semiconductor molecule, polymer, and polycrystalline metal, respectively. To verify the universality of this capping layer approach, the dewetting experiments are performed for single‐layer graphene transferred onto polystyrene (PS), semiconducting thienoazacoronene (EH‐TAC), gold, and also MoS 2 on PS. Thermodynamic modeling indicates that the exceptionally high Young's modulus and surface conformity of 2D capping layers such as graphene and MoS 2 substantially suppress surface fluctuations and thus dewetting. As long as the uncovered area is smaller than the fluctuation wavelength of the thin film in a dewetting process via spinodal decomposition, the dewetting should be suppressed. The 2D monolayer‐capping approach opens up exciting new possibilities to enhance the thermal stability and expands the processing parameters for thin film materials without significantly altering their physical properties.

Cao, Peigen↗

Plasmon-Tunable Tip Pyramids: Monopole Nanoantennas for Near-Field Scanning Optical Microscopy

Squeezing optical fields into nanometer scale is the key step to perform spatially resolved near-field optics. In scattering-type near-field optical microscopy, this task is accomplished by nanoantennas that convert propagating radiation to local near-fields and vice versa. The usual nanoantenna is composed by an elongated metal structure whose longitudinal dimension is scaled to support dipole modes of localized surface plasmon resonances. However, monopole modes can also be explored if the elongated metal nanoparticle is electrically grounded on a flat metallic plateau that acts like a mirror providing the monopole's image that closes the dipole system. Here, a method for batch production of monopole nanoantennas for scattering-type near-field scanning optical microscopy is presented. The nanoantennas are composed of a micropyramidal body with a nanopyramidal end whose lateral dimension can be scaled to fine-tune localized surface plasmon resonance modes. In conclusion, the monopole character of the nanoantennas is revealed by electron energy loss spectroscopy, and their efficiency and reproducibility are tested in tip-enhanced Raman spectroscopy experiments performed on single-layer graphene and single-walled carbon nanotubes.

47 OTHER INSTRUMENTATION↗

Coupling particle scale model and SuperDEM–CFD for multiscale simulation of biomass pyrolysis in a packed bed pyrolyzer

An efficient biomass pyrolysis process requires a comprehensive understanding of the chemical and physical phenomena that occur at multi-length and time scales. In this study, a multiscale computational approach was developed and validated for biomass pyrolysis in a packed-bed reactor by integrating pyrolysis kinetics, a particle scale model, and SuperDEM-CFD in open-source code MFiX. A one-dimensional particle-scale model that discretizes the characteristic length of biomass particle into layers was developed to predict the intraparticle phenomena inside a single particle. The 1D model was validated by comparing it with a single biomass particle pyrolysis experiment. Here, a recently developed SuperDEM-CFD model was employed to simulate the non-spherical particle-particle contact and fluid-particle interaction. The coupled model was applied to simulate the pyrolysis of cubic biomass particles in a packed bed and validated by comparing with experimental data. Simulation with and without particle-scale model was compared, and the effect of the gas-solid heat transfer models was also investigated.

09 BIOMASS FUELS↗

Imaging of surface nanobubbles by atomic force microscopy in liquids: Influence of drive frequency on the characterization of ultrasoft matter: Surface Nanobubbles and Soft Matter by AFM

Imaging of soft matter with atomic force microscopy (AFM) is challenging due to tip-induced deformation, which convolutes with the measurement. The challenges are generally more serious in liquid environments due to a severe loss of sensitivity of the vibrating microcantilever to external forces, as well as due to the presence of undesirable mechanical resonances when piezoelectric excitation systems are used. Furthermore, the choice of imaging parameters can have a significant impact on the quality of the results, such that the customary practices used for tuning the cantilever are not always appropriate. Here we explore the influence of the chosen drive frequency on the imaging of ultrasoft matter, using surface gas nanobubbles on gold-coated glass and highly oriented pyrolytic graphite (HOPG) as a test platform. We carry out single- and multifrequency AFM experiments using both the traditional amplitude-peak method and the recently proposed phase-slope-peak method for tuning the cantilever, as well as piezoelectric and photothermal excitation, providing an extensive discussion on the factors governing the level of tip-induced sample deformation and the quality of the phase contrast obtained for each of the methods. The general conclusion is that there is no “one-size-fits-all” approach for tuning the cantilever for low-impact tapping-mode AFM, although rational optimization of the imaging process is generally possible, whereby the choice of the drive frequency plays a prominent role. The physical insight and guidelines provided here can be extremely useful for the gentle imaging of a wide range of biological and other soft materials in liquid environments. Microsc. Res. Tech. 80:41–49, 2017.

42 ENGINEERING↗

Surface-supported cluster catalysis: Ensembles of metastable states run the show

It has recently been demonstrated that the dynamic behaviour of surface-supported nanocluster catalysts in realistic reaction conditions defies conventional models used in catalysis. This opens new doors in catalysis by giving more leverage in catalyst design, but also requires a major revision of the understanding of how dynamic heterogeneous catalytic interfaces operate, as well as of the computational approaches of catalyst modelling, and experimental methods of catalyst characterization. Key aspects of the new paradigm include the collective action of many catalyst states that form a statistical ensemble in reacting conditions, the catalytic activity and selectivity being driven by rare and metastable catalyst states, reaction thermodynamics and kinetics being controlled by different states of the catalyst, broken scaling relationships, non-Arrhenius behaviours, and catalyst dynamic restructuring being an essential part of the reaction mechanism. For computation, this complexity means the departure from the standard DFT calculations of reaction mechanisms on a single catalyst structure. For experiment, it calls for the development of operando characterization tools with the per-site resolution and the ability to find the minority sites that govern the catalytic activity. For catalyst design, the goal becomes the creation of the catalyst state (geometric and electronic) that might not be present in the as-prepared catalyst, but would develop in the reaction conditions and would have the desired activity then. While cluster catalysts are the most dramatic in their dynamic fluxionality, other amorphous interfaces also exhibit some of it, and thus are also subject to similar paradigm revision.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An investigation of the very rare ${K}^{+}\to {\pi}^{+}\nu \overline{\nu}$ decay

The NA62 experiment reports an investigation of the ${K}^{+}\to {\pi}^{+}\nu \overline{\nu}$ mode from a sample of ${K}^{+}$ decays collected in 2017 at the CERN SPS. The experiment has achieved a single event sensitivity of (0.389 ± 0.024) × 10 -10 , corresponding to 2.2 events assuming the Standard Model branching ratio of (8.4 ± 1.0) × 10 -11 . Two signal candidates are observed with an expected background of 1.5 events. Combined with the result of a similar analysis conducted by NA62 on a smaller data set recorded in 2016, the collaboration now reports an upper limit of 1.78 × 10 -10 for the ${K}^{+}\to {\pi}^{+}\nu \overline{\nu}$ branching ratio at 90% CL. This, together with the corresponding 68% CL measurement of (${0.48}_{-0.48}^{+0.72}$) × 10 -10 , are currently the most precise results worldwide, and are able to constrain some New Physics models that predict large enhancements still allowed by previous measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Constitutive Modeling of the Flow Stress of GCr15 Continuous Casting Bloom in the Heavy Reduction Process

According to the calculation results of a 3D thermomechanical-coupled finite-element (FE) model of GCr15 bearing steel bloom during a heavy reduction (HR) process, the variation ranges in the strain rate and strain under HR were described. In addition, the hot deformation behavior of the GCr15 bearing steel was studied over the temperature range from 1023 K to 1573 K (750 °C to 1300 °C) with strain rates of 0.001, 0.01, and 0.1 s{sup −1} in single-pass thermosimulation compression experiments. To ensure the accuracy of the constitutive model, the temperature range was divided into two temperature intervals according to the fully austenitic temperature of GCr15 steel [1173 K (900 °C)]. Two sets of material parameters for the constitutive model were derived based on the true stress–strain curves of the two temperature intervals. A flow stress constitutive model was established using a revised Arrhenius-type constitutive equation, which considers the relationships among the material parameters and true strain. This equation describes dynamic softening during hot compression processes. Considering the effect of glide and climb on the deformation mechanism, the Arrhenius-type constitutive equation was modified by a physically based approach. This model is the most accurate over the temperatures ranging from 1173 K to 1573 K (900 °C to 1300 °C) under HR deformation conditions (ignoring the range from 1273 K to 1573 K (1000 °C to 1300 °C) with a strain rate of 0.1 s{sup −1}). To ensure the convergence of the FE calculation, an approximated method was used to estimate the flow stress at temperatures greater than 1573 K (1300 °C).

36 MATERIALS SCIENCE↗

Dynamic Recrystallization and Grain Refinement of Fe-P-C-Si and Fe-P-C-Si-N Steels

Grain refinement is an effective technique to improve the mechanical properties of steels. In the present work, single-pass hot compression experiments have been conducted on two different compositions of high phosphorous steels to study the microstructural evolution and ferrite grain refinement at various strain rates and deformation temperatures, i.e., 0.01-10 s{sup −1} and 750-1050 °C, respectively. Optical metallography has been employed to understand the physical processes that take place during hot deformation process. The results indicate that when these compositions of high phosphorous steels are worked at relatively low temperatures in the intercritical regions, a ferrite grain size of 5-7 µm is obtained. It is observed that the grain size decreases with an increase in strain rate and with the decrease in deformation temperature. Based on the values of stress exponent (n) obtained in the present work, dislocation creep is identified as the deformation mechanism. The activation energies for deformation of these two types of high phosphorous steels have been calculated. The effect of the alloying elements on the stress–strain curve, microstructure, and grain refinement has been discussed.

36 MATERIALS SCIENCE↗

Rapid Solidification in Bulk Ti-Nb Alloys by Single-Track Laser Melting

Single-track laser melting experiments were performed on bulk Ti-Nb alloys to explore process parameters and the resultant macroscopic structure and microstructure. The microstructures in Ti-20Nb and Ti-50Nb (at.%) alloys exhibited cellular growth during rapid solidification, with average cell size of approximately 0.5 µm. Solidification velocities during cellular growth were calculated from images of melt tracks. Measurements of the composition in the cellular and intercellular regions revealed nonequilibrium partitioning and its dependence on velocity during rapid solidification. Furthermore, experimental results were used to benchmark a phase-field model to describe rapid solidification under conditions relevant to additive manufacturing.

36 MATERIALS SCIENCE↗

Vector-level feedforward control of LPBF melt pool area using a physics-based thermal model

Laser powder bed fusion (LPBF) is an additive manufacturing technique that has gained popularity thanks to its ability to produce geometrically complex, fully dense metal parts. However, these parts are prone to internal defects and geometric inaccuracies, stemming in part from variations in the melt pool. Here, this paper proposes a novel vector-level feedforward control framework for regulating melt pool area in LPBF. By decoupling part-scale thermal behavior from small-scale melt pool physics, the controller provides a scale-agnostic prediction of melt pool area and efficient optimization over it. This is done by operating on two coupled lightweight models: a finite-difference thermal model that efficiently captures vector-level temperature fields and a reduced-order, analytical melt pool model. Each model is calibrated separately with minimal single-track and 2D experiments, and the framework is validated on a complex 3D geometry in both Inconel 718 and 316L stainless steel. Results showed that feedforward vector-level laser power scheduling reduced geometric inaccuracy in key dimensions by 62%, overall porosity by 16.5%, and photodiode root-mean-squared deviation by 38.5% on average. Overall, this modular, data-efficient approach demonstrates that proactively compensating for known thermal effects can significantly improve part quality while remaining computationally efficient and readily extensible to other materials and machines.

Additive manufacturing↗

Experimental and modeling study of the pyrolysis and oxidation of an iso-paraffinic alcohol-to-jet fuel

Single pulse shock tube experiments were performed to determine the pyrolytic and oxidative decomposition products of an alcohol-to-jet fuel (ATJ) composed primarily of about 90% iso-dodecane. Experiments were conducted at 4 bar nominal pressure, 2 ms nominal reaction time, and temperatures ranging from 900 K to 1550 K. For oxidation, the equivalence ratio was 0.27. Gas chromatography (GC) was used to analyze the products of the chemical reactions and to determine their mole fractions. The experimental results were compared against mole fractions computed using a detailed iso-alkane kinetic model, developed for the present study. The model was able to accurately reproduce the experimental results of both ATJ pyrolysis and oxidation. The experimental data and the kinetic modelintroduced in the current study shall aid in progress in understanding the oxidation of the alternative jet fuels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and fuel-surrogates modeling study of the high-pressure pyrolysis of specialty cetane number fuels: implications for fall-off in ethylene unimolecular dissociation

Single pulse shock tube experiments were conducted at 50 atm nominal pressure and 4 ms nominal reaction time over a temperature range of 900–1800 K, to study the pyrolysis speciation of a multi-component jet fuel, F-24, and six cetane number (CN) specialty fuels - CN30, CN35, CN40, CN45, CN50, and CN55. Gas chromatography (GC) was used to qualitatively and quantitatively analyze the post shock gases. The relationship between the formation of key pyrolysis species and the chemically controlled combustion propensity as reflected by the cetane number of each fuel was examined. A surrogate-based mechanism from the CRECK Modelling Group and chemical-functional group based optimized surrogates (CFGO) were used to simulate the pyrolysis speciation results. The model was able to capture the chemistry of most species except two important pyrolysis intermediates – ethylene and acetylene. Chemical kinetic analyses were performed to identify the important reactions which affect the chemistry of these species; however, the rate parameters of critical reactions were found to be unsuitable for simulating the present high-pressure studies. Here, to address this unsuitability, a theory-based fall-off analysis for three reactions representing the decomposition of ethylene and subsequent formation of acetylene was performed, and these are included in an updated version of the CRECK mechanism. This update resolves discrepancies between the experimental results and simulations for ethylene and acetylene. Reaction flux analyses using the updated surrogate model were also performed to identify the important reaction pathways responsible for the formation of crucial species and to provide an analysis of the chemistry of complex multi-component fuel systems. The fundamental reactions responsible for driving pyrolysis chemistry were greatly influenced by the chemical functional groups present in these fuels. In addition to updating the rate parameters of specific reactions to improve modeling, this study also emphasizes the effectiveness of the fuel-surrogate approach, where surrogates representing the chemical functional group composition of the parent fuel serve as a valuable tool for predicting the combustion chemistry of novel fuels.

Chemical Kinetics↗

The isotope effect for Mg-Fe interdiffusion in olivine and its dependence on crystal orientation, composition and temperature

Isotopic fractionation associated with diffusion in crystals is the most reliable means of understanding the origin of mineral zoning in igneous and metamorphic rocks. We have experimentally determined the relative diffusivities of iron isotopes in olivine as a function of crystallographic orientation, composition, and temperature. For two isotopes i and j of an element, the isotope effect for diffusion is parameterized as D i /D j = (m j /m i ) β , where β is a dimensionless parameter, and D and m stand for diffusivity and mass, respectively. A series of single crystal diffusion couple experiments were conducted at an oxygen fugacity of QFM – 1.5 at temperatures of 1200, 1300, and 1400 °C. Here, for the Fo 83.4 -Fo 88.8 composition pair, β Fe is isotropic and a value of 0.16 ± 0.09 can be used to describe diffusion along all major crystallographic axes in olivine. Based on our experiments and previously reported coupled Mg-Fe isotopic data, we also estimate β Mg = 0.09 ± 0.05 for this range of olivine composition. For the Fo 88.8 -Fo100 composition pair, β Fe becomes anisotropic with β Fe [100] = 0.11 ± 0.03, β Fe [010 ] = 0.14 ± 0.03 (both within error of the value measured for the Fo83.4-Fo88.8 pair), and β Fe [001] = 0.03 ± 0.03. For Fo# between 83.4 and 100, β Fe [100] and β Fe [010] are thus independent of composition. The reason why βFe [001] transitions from ~0.16 to ~0.03 close to the Mg-endmember is unclear. Over the temperature range studied, a dependence of βFe on temperature was not resolved. General analytical expressions are introduced to calculate isotopic fractionation as a function of distance, time, β, and the concentration contrast between the diffusing media for spherical, cylindrical, and planar geometries.

36 MATERIALS SCIENCE↗

Recognition and Detoxification of the Insecticide DDT by Drosophila melanogaster Glutathione S-Transferase D1

GSTD1 is one of several insect glutathione S-transferases capable of metabolizing the insecticide DDT. Here we use crystallography and NMR to elucidate the binding of DDT and glutathione to GSTD1. The crystal structure of Drosophila melanogaster GSTD1 has been determined to 1.1 {angstrom} resolution, which reveals that the enzyme adopts the canonical GST fold but with a partially occluded active site caused by the packing of a C-terminal helix against one wall of the binding site for substrates. This helix would need to unwind or be displaced to enable catalysis. When the C-terminal helix is removed from the model of the crystal structure, DDT can be computationally docked into the active site in an orientation favoring catalysis. Two-dimensional {sup 1}H,{sup 15}N heteronuclear single-quantum coherence NMR experiments of GSTD1 indicate that conformational changes occur upon glutathione and DDT binding and the residues that broaden upon DDT binding support the predicted binding site. We also show that the ancestral GSTD1 is likely to have possessed DDT dehydrochlorinase activity because both GSTD1 from D. melanogaster and its sibling species, Drosophila simulans, have this activity.

36 MATERIALS SCIENCE↗