Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “selective separators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Towards the clinical application of laser-induced breakdown spectroscopy for rapid pathogen diagnosis: the effect of mixed cultures and sample dilution on bacterial identification

Laser-induced breakdown spectroscopy has been utilized to classify and identify bacterial specimens on the basis of their atomic composition. We have characterized the effect that the presence of a second bacterial species in the ablated specimen had on the identification of the majority species. Specimens with a reduced number of bacterial cells (approximately 2500) were identified with 100% accuracy when compared to undiluted specimens. In addition, a linear dependence of the total spectral power as a function of cell number was determined. Lastly, a high selectivity was obtained for a LIBS-based analysis of nine separate bacterial strains from four genera.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Production of High-Purity O 2 via Membrane Contactor with Oxygen Carrier Solutions (Final Report)

Under the current research program, Gas Technology Institute (GTI) and University of South Carolina (USC) have been developing a bio-mimetic technology to produce greater than 95% purity oxygen from air via a hollow fiber membrane contactor (HFMC) with oxygen carrier solutions as the solvent. Low-cost poly (ethyleneimine)-cobalt (PEI-Co) complex solutions have been developed as the oxygen solvent. The PEI-Co complex with PEI/Co ratio of 10 was selected as the O 2 carrier solution for demonstrating O 2 separation performance in the membrane contactor due to its high O 2 capacity (1.1 L O 2 (STP)/L solution), fast uptake kinetics, and moderate viscosity (2.3 mPa∙s). In a membrane absorption test, the air was fed to the bore side of a hollow fiber membrane module whereas the PEI-Co solution was added to the shell side. A N 2 concentration as high as 99.4 vol% was observed in the outlet of the feed gas, indicating the majority of the O 2 was absorbed by the O 2 solvent. In integrated membrane absorption/desorption tests, vacuum and argon sweeps were used to achieve a high purity of oxygen. With the argon sweep approach, an O 2 concentration greater than 99.6% was observed in the desorbed gas stream on an argon-free basis. Overall, this proof-of-concept technology development has been successful as we have met all of the project milestones.

20 FOSSIL-FUELED POWER PLANTS↗

Measurement of Muon Neutrino Quasielastic Scattering on a Hydrocarbon Target at $E_{\nu}$ $\sim$3.5 GeV

In this thesis, we present the measurement of the charged-current quasi-elastic interaction on polystyrene scintillator (CH) in the MINERA detector at neutrino energy between 1.5 GeV and 10.0 GeV ( 3:5 GeV). The data used was taken between March and July 2010, with a total of 9.421019 protons-on-target. Interactions were selected by requiring a negative muon and low calorimetric recoil energy separated from the interaction vertex. The analysis was performed on 29,620 charged current quasi-elastic interaction candidates in MINERA's ne-grained scintillator tracker region. The measurement is reported as a ux-averaged single dierential cross section in Q2 and compared with the prediction of dierent theoretical models in Monte Carlo simulations. Dierence in shape between the measured d=dQ2 QE and the expectation from a model based on independent nucleons in a relativistic fermi gas is found.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Separating beam-induced and cosmogenic muon backgrounds in the ICARUS detector

Due to high cosmic ray flux near the earth's surface, the rejection of cosmogenic muon backgrounds is a preeminent concern for particle detectors using Liquid Argon Time Projection Chamber (LArTPC) technology. One such detector, ICARUS of the short baseline neutrino experiment, also observes muons generated from neutrino interactions with nuclei in the surrounding rock. Our analysis exploits the differences between cosmogenic and rock-generated muons to separate rock-generated muons from the background. We develop a selection with 96.5\% efficiency and 81\% accuracy. Use of this selection on data and Monte-Carlo indicates monte-carlo may underestimate the true rock muon flux. These results have implications for calibration of the ICARUS detector and tuning of simulation.

Wells, David↗

Lignin Extraction and Condensation as a Function of Temperature, Residence Time, and Solvent System in Flow-through Reactors

Solvolytic extraction of lignin from biomass is a critical step in lignin-first biorefining, including the reductive catalytic fractionation (RCF) process. Key to optimal RCF processing is the ability to rapidly extract lignin from biomass at high delignification extents and transfer the lignin molecules to a catalyst surface in a time frame that minimizes lignin condensation reactions. Here, we use a flow-through reactor to study the effects of temperature (175–250 °C), residence time (9 to 36 min), and solvent composition (methanol and methanol–water) on lignin extraction and condensation. We evaluated three metrics at each condition: total delignification, delignification rate, and extent of condensation, the latter measured by a decrease in monomer yield for batch hydrogenolysis reactions of solvolysis liquor compared to batch RCF reactions. We observe that delignification is predominantly determined by temperature, while residence time dictates the lignin condensation extent. Moreover, the extent of both extraction and condensation increased in the methanol–water solvent system compared to that in the methanol system. Lignin extracted in methanol is stable up to 18-min residence times at or below 225 °C, while a majority of the lignin extracted in methanol–water is condensed with a 9-min residence time at 200 °C. These results can inform reactor designs and solvent selection for lignin-first biorefining processes that aim to physically separate the biomass and catalyst.

biorefining↗

Status of CHIP-TRAP: The Central Michigan University High-Precision Penning Trap

Precise and accurate atomic mass data provide crucial information for applications in a wide range of fields in physics and beyond, including astrophysics, nuclear structure, particle and neutrino physics, fundamental symmetries, chemistry, and metrology. The most precise atomic mass measurements are performed on charged particles confined in a Penning trap. Here, we describe the development, status, and outlook of CHIP-TRAP: the Central Michigan University high-precision Penning trap. CHIP-TRAP aims to perform ultra-high precision (~1 part in 10 11 fractional precision) mass measurements on stable and long-lived isotopes produced with external ion sources and transported to the Penning traps. Along the way, ions of a particular m/q are selected with a multi-reflection time-of-flight mass separator (MR-TOF-MS), with further filtering performed in a cylindrical capture trap before the ions are transported to a pair of hyperbolic measurement traps. In this paper, we report on the design and status of CHIP-TRAP and present results from the commissioning of the ion sources, MR-TOF-MS, and capture trap. We also provide an outlook on the continued development and commissioning of CHIP-TRAP.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SELECTING M GIANTS WITH INFRARED PHOTOMETRY: DISTANCES, METALLICITIES, AND THE SAGITTARIUS STREAM

Using a spectroscopically confirmed sample of M giants, M dwarfs, and quasars from the LAMOST survey, we assess how well Wide-field Infrared Survey Explorer (WISE) and Two Micron All Sky Survey color cuts can be used to select M giant stars. The WISE bands are very efficient at separating M giants from M dwarfs, and we present a simple classification that can produce a clean and relatively complete sample of M giants. We derive a new photometric relation to estimate the metallicity for M giants, calibrated using data from the APOGEE survey. We find a strong correlation between the (W1−W2) color and [M/H], where almost all of the scatter is due to photometric uncertainties. We show that previous photometric distance relations, which are mostly based on stellar models, may be biased and devise a new empirical distance relation, investigating trends with metallicity and star formation history. Given these relations, we investigate the properties of M giants in the Sagittarius stream. The offset in the orbital plane between the leading and trailing tails is reproduced, and by identifying distant M giants in the direction of the Galactic anticenter, we confirm that the previously detected debris in the outer halo is the apocenter of the trailing tail. We also find tentative evidence supporting an existing overdensity near the leading tail in the northern Galactic hemisphere, possibly an extension to the trailing tail (so-called Branch C). We have measured the metallicity distribution along the stream, finding a clear metallicity offset between the leading and trailing tails, in agreement with models for the stream formation. We include an online table of M giants to facilitate further studies.

79 ASTRONOMY AND ASTROPHYSICS↗

THE CIRCUMGALACTIC MEDIUM OF SUBMILLIMETER GALAXIES. I. FIRST RESULTS FROM A RADIO-IDENTIFIED SAMPLE

We present the first results from an ongoing survey to characterize the circumgalactic medium (CGM) of massive high-redshift galaxies detected as submillimeter galaxies (SMGs). We constructed a parent sample of 163 SMG–QSO pairs with separations less than ∼36″ by cross-matching far-infrared-selected galaxies from Herschel with spectroscopically confirmed QSOs. The Herschel sources were selected to match the properties of the SMGs. We determined the sub-arcsecond positions of six Herschel sources with the Very Large Array and obtained secure redshift identification for three of those with near-infrared spectroscopy. The QSO sightlines probe transverse proper distances of 112, 157, and 198 kpc at foreground redshifts of 2.043, 2.515, and 2.184, respectively, which are comparable to the virial radius of the ∼10{sup 13} M {sub ⊙} halos expected to host SMGs. High-quality absorption-line spectroscopy of the QSOs reveals systematically strong H i Ly α absorption around all three SMGs, with rest-frame equivalent widths of ∼2–3 Å. However, none of the three absorbers exhibit compelling evidence for optically thick H i gas or metal absorption, in contrast to the dominance of strong neutral absorbers in the CGM of luminous z ∼ 2 QSOs. The low covering factor of optically thick H i gas around SMGs tentatively indicates that SMGs may not have as prominent cool gas reservoirs in their halos as the coeval QSOs and that they may inhabit less massive halos than previously thought.

79 ASTRONOMY AND ASTROPHYSICS↗

Validation of Electrochemically Modulated Separations Performed On-Line with MC-ICP-MS for Uranium and Plutonium Isotopic Analyses

The most time consuming process in uranium or plutonium isotopic analyses is performing the requisite chromatographic separation of the actinides. Filament preparation for thermal ionization (TIMS) adds further delays, but is generally accepted due to the unmatched performance in trace isotopic analyses. Advances in Multi-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICP-MS) are beginning to rival the performance of TIMS. Methods, such as Electrochemically Modulated Separations (EMS) can efficiently pre-concentrate U or Pu quite selectively from small solution volumes in a matrix of 0.5 M nitric acid. When performed in-line with ICP-MS, the rapid analyte release from the electrode is fast, and large transient analyte signal enhancements of >100 fold can be achieved as compared to more conventional continuous nebulization of the original starting solution. This makes the approach ideal for very low level isotope ratio measurements. In this paper, some aspects of EMS performance are described. These include low level Pu isotope ratio behavior versus concentration by MC-ICP-MS and uranium rejection characteristics that are also important for reliable low level Pu isotope ratio determinations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fabrication of fiber supported ionic liquids and methods of use

One or more embodiments relates to the production of a fabricated fiber having an asymmetric polymer network and having an immobilized liquid such as an ionic liquid within the pores of the polymer network. The process produces the fabricated fiber in a dry-wet spinning process using a homogenous dope solution, providing significant advantage over current fabrication methods for liquid-supporting polymers. The fabricated fibers may be effectively utilized for the separation of a chemical species from a mixture based on the selection of the polymer, the liquid, and the solvent utilized in the dope.

36 MATERIALS SCIENCE↗

Unravelling the radiation-induced redox chemistry of plutonium ions in aqueous solution

Plutonium plays a critical role in nuclear fuel cycle technologies, but our understanding of its fundamental radiation-induced redox chemistry is limited. Changes in oxidation states affect the speciation and transport of plutonium ions in solution. For example, solvent extraction techniques used to separate and recover plutonium from used nuclear fuel rely on the selective formation, maintenance, and complexation of specific plutonium oxidation states. However, radiolytically generated radicals, ions, and molecules can drive the oxidation state distribution of plutonium ions far from equilibrium, ultimately changing the physical and chemical properties of the bulk system. These radiation-induced processes are inevitable due to the ionizing radiation fields generated by the radioactive decay of plutonium and its daughter nuclides. Therefore, mechanistically understanding how plutonium's various oxidation states respond to ionizing radiation is essential for predicting its behavior in solution. Here, we present significant advances in our understanding of radiation-induced plutonium redox chemistry by using time-resolved (electron pulse) and dose accumulation (alpha and gamma) irradiation techniques, along with quantitative multiscale modeling methods.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Evaluation of band offset at amorphous-Si/BaSi{sub 2} interfaces by hard x-ray photoelectron spectroscopy

The 730 nm-thick undoped BaSi{sub 2} films capped with 5 nm-thick amorphous Si (a-Si) intended for solar cell applications were grown on Si(111) by molecular beam epitaxy. The valence band (VB) offset at the interface between the BaSi{sub 2} and the a-Si was measured by hard x-ray photoelectron spectroscopy to understand the carrier transport properties by the determination of the band offset at this heterointerface. We performed the depth-analysis by varying the take-off angle of photoelectrons as 15°, 30°, and 90° with respect to the sample surface to obtain the VB spectra of the BaSi{sub 2} and the a-Si separately. It was found that the barrier height of the a-Si for holes in the BaSi{sub 2} is approximately −0.2 eV, whereas the barrier height for electrons is approximately 0.6 eV. This result means that the holes generated in the BaSi{sub 2} layer under solar radiation could be selectively extracted through the a-Si/BaSi{sub 2} interface, promoting the carrier separation in the BaSi{sub 2} layer. We therefore conclude that the a-Si/BaSi{sub 2} interface is beneficial for BaSi{sub 2} solar cells.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Testing for X-Ray–SZ Differences and Redshift Evolution in the X-Ray Morphology of Galaxy Clusters

We present a quantitative study of the X-ray morphology of galaxy clusters, as a function of their detection method and redshift. We analyze two separate samples of galaxy clusters: a sample of 36 clusters at 0.35<z<0.9 selected in the X-ray with the ROSAT PSPC 400 deg{sup 2} survey, and a sample of 90 clusters at 0.25<z<1.2 selected via the Sunyaev–Zel’dovich (SZ) effect with the South Pole Telescope. Clusters from both samples have similar-quality Chandra observations, which allow us to quantify their X-ray morphologies via two distinct methods: centroid shifts (w) and photon asymmetry (A{sub phot}). The latter technique provides nearly unbiased morphology estimates for clusters spanning a broad range of redshift and data quality. We further compare the X-ray morphologies of X-ray- and SZ-selected clusters with those of simulated clusters. We do not find a statistically significant difference in the measured X-ray morphology of X-ray and SZ-selected clusters over the redshift range probed by these samples, suggesting that the two are probing similar populations of clusters. We find that the X-ray morphologies of simulated clusters are statistically indistinguishable from those of X-ray- or SZ-selected clusters, implying that the most important physics for dictating the large-scale gas morphology (outside of the core) is well-approximated in these simulations. Finally, we find no statistically significant redshift evolution in the X-ray morphology (both for observed and simulated clusters), over the range of z∼0.3 to z∼1, seemingly in contradiction with the redshift-dependent halo merger rate predicted by simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Amidine-Functionalized Poly(2-vinyl-4,4-dimethylazlactone) for Selective and Efficient CO 2 Fixing

Development of novel polymeric materials capable of efficient CO 2 capture and separation under ambient conditions is crucial for cost-effective and practical industrial applications. Here we report the facile synthesis of a new CO 2 -responsive polymer through post-polymerization modification of poly(2 vinyl-4,4-dimethylazlactone) (PVDMA). The reactive pendant azlactone groups of PVDMA are easily modified with 4-(N-methyltetrahydropyrimidine) benzyl alcohol (PBA) without any by-product formation. FTIR and TGA experiments show the new PBA functionalized polymer powder can reversibly capture CO 2 at room temperature and under atmospheric pressure. CO2 capture was selective, showing a high fixing efficiency even with a mixed gas system (20% CO 2 , 80% N 2 ) similar to flue gas. CO 2 release occurred at room temperature and release profiles were investigated as a function of temperature. Density Functional Theory (DFT) calculations coupled with modeling and simulation reveal the presence of two CO 2 binding sites in the PBA functionalized polymer resulting in a two-step CO 2 release at room temperature. Finally, we find that the ease of material preparation, high fixing efficiency, and robust release characteristics suggest that post-polymerization modification may be a useful route to designing new materials for CO 2 capture.

36 MATERIALS SCIENCE↗

Electron Screening Effects on {alpha}-decay

An open problem in Nuclear Astrophysics concerns the understanding of electron-screening effects on nuclear reaction rates at stellar energies. In this framework, we have proposed to investigate the influence of the electron cloud on {alpha}-decay by measuring Q-values and {alpha}-decay half-lives of fully stripped, H-like and He-like ions. These kinds of measurements have been feasible just recently for highly-charged radioactive nuclides by fragmentation of {sup 238}U at relativistic energies at the FRS-ESR facility at GSI. In this way it is possible to produce, efficiently separate and store highly-charged {alpha}-emitters. Candidates for the proposed investigation were carefully selected and will be studied by using the Schottky Mass Spectroscopy technique. In order to establish a solid reference data set, lifetimes and Q{sub {alpha}}-value measurements of the corresponding neutrals have been performed directly at the FRS, by implanting the separated ions into an active Silicon stopper.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A CONSTRAINT ON QUASAR CLUSTERING AT z = 5 FROM A BINARY QUASAR

We report the discovery of a quasar pair at z = 5 separated by 21″. Both objects were identified as quasar candidates using simple color selection techniques applied to photometric catalogs from the Canada–France–Hawaii Telescope (CFHT) Legacy Survey (CFHTLS). Spectra obtained with the MMT present no discernible offset in redshift between the two objects; on the other hand, there are clear differences in the emission line profiles and in the multiwavelength spectral energy distributions that strongly disfavor the hypothesis that they are gravitationally lensed images of a single quasar. Both quasars are surprisingly bright given their proximity (a projected separation of ∼135 kpc), with i = 19.4 and i = 21.4. Previous measurements of the luminosity function demonstrate that luminous quasars are extremely rare at z = 5; the existence of this pair suggests that quasars have strong small-scale clustering at high redshift. Assuming a real-space correlation function of the form ξ(r) ∝ (r/r{sub 0}){sup −2}, this discovery implies a correlation length of r{sub 0} ≳ 20h{sup −1} Mpc, consistent with a rapid strengthening of quasar clustering at high redshift as seen in previous observations and predicted by theoretical models where feedback effects are inefficient at shutting down black hole growth at high redshift.

79 ASTRONOMY AND ASTROPHYSICS↗

Aqueous Zr/Hf IV ‐Oxo Cluster Speciation and Separation

Abstract Many industrial separations of chemically‐similar elements are achieved by solvent extraction, exploiting differences in speciation and solubility across aqueous‐organic interfaces. We recently identified [OM 4 (OH) 6 (SCN) 12 ] 4− (OM 4 , M=Zr/Hf IV ) tetrahedral oxoclusters as the main species in industrial processes that produce nuclear‐grade Zr and Hf from crude ore. However, isostructural/isoelectronic OM 4 ‐oxoclusters do not explain selective extraction of Hf into the organic phase. Here we have characterized heterometal Hf−Zr clusters in solution and the solid‐state yielding key information about their fundamentally different chemistry that engenders separation. Clusters prepared with both ammonium (industrial process) and tetramethylammonium counter cations revealed that 1) heterometal clusters (instead of a mixture of homometal clusters) assemble, and 2) Hf‐rich OM 4 selectively precipitates over Zr‐rich OM 4 , providing a separation process that does not require an organic extractant. Mass spectrometry, small‐angle X‐ray scattering, solution‐state 1 H nuclear magnetic resonance (NMR) spectroscopy, and solid‐state 17 O NMR evidence both mixed‐metal speciation and selective Hf‐precipitation. Raman spectroscopy suggests greater Zr‐ligand lability than Hf‐ligand lability, consistent with higher aqueous solubility of Zr‐rich clusters, enabling both extraction and precipitation‐based separation. Fundamentally, we also identify a key difference between these chemically similar elements that has enabled diversification of Zr‐polyoxocation chemistry over the last decade, while Hf‐polyoxocation chemistry lags.

Roseborough, Alexander [Department of Chemistry Or↗

Identifying sequence perturbations to an intrinsically disordered protein that determine its phase-separation behavior

Phase separation of intrinsically disordered proteins (IDPs) commonly underlies the formation of membraneless organelles, which compartmentalize molecules intracellularly in the absence of a lipid membrane. Identifying the protein sequence features responsible for IDP phase separation is critical for understanding physiological roles and pathological consequences of biomolecular condensation, as well as for harnessing phase separation for applications in bioinspired materials design. To expand our knowledge of sequence determinants of IDP phase separation, we characterized variants of the intrinsically disordered RGG domain from LAF-1, a model protein involved in phase separation and a key component of P granules. Based on a predictive coarse-grained IDP model, we identified a region of the RGG domain that has high contact probability and is highly conserved between species; deletion of this region significantly disrupts phase separation in vitro and in vivo. We determined the effects of charge patterning on phase behavior through sequence shuffling. We designed sequences with significantly increased phase separation propensity by shuffling the wild-type sequence, which contains well-mixed charged residues, to increase charge segregation. This result indicates the natural sequence is under negative selection to moderate this mode of interaction. We measured the contributions of tyrosine and arginine residues to phase separation experimentally through mutagenesis studies and computationally through direct interrogation of different modes of interaction using all-atom simulations. Finally, we show that despite these sequence perturbations, the RGG-derived condensates remain liquid-like. Together, these studies advance our fundamental understanding of key biophysical principles and sequence features important to phase separation.

36 MATERIALS SCIENCE↗