Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reflectivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

An analysis of combustion studies in shock expansion tunnels and reflected shock tunnels

The effect of initial nonequilibrium dissociated air constituents on the combustion of hydrogen in high-speed flows for a simulated Mach 17 flight condition was investigated by analyzing the results of comparative combustion experiments performed in a reflected shock tunnel test gas and in a shock expansion tunnel test gas. The results were analyzed and interpreted with a one-dimensional quasi-three-stream combustor code that includes finite rate combustion chemistry. The results of this study indicate that the combustion process is kinetically controlled in the experiments in both tunnels and the presence of the nonequilibrium partially dissociated oxygen in the reflected shock tunnel enhances the combustion. Methods of compensating for the effect of dissociated oxygen are discussed.

Jachimowski, Casimir J.↗

High temperature fiber optic microphone having a pressure-sensing reflective membrane under tensile stress

A fiber optic microphone is provided for measuring fluctuating pressures. An optical fiber probe having at least one transmitting fiber for transmitting light to a pressure-sensing membrane and at least one receiving fiber for receiving light reflected from a stretched membrane is provided. The pressure-sensing membrane may be stretched for high frequency response. Further, a reflecting surface of the pressure-sensing membrane may have dimensions which substantially correspond to dimensions of a cross section of the optical fiber probe. Further, the fiber optic microphone can be made of materials for use in high temperature environments, for example greater than 1000 F. A fiber optic probe is also provided with a backplate for damping membrane motion. The backplate further provides a means for on-line calibration of the microphone.

Zuckerwar, Allan J.↗

How well is Martian ozone inferred with reflectance spectroscopy?

The Mariner 9 UV spectrometer scanned from 2100 to 3500 Angstroms in one of its two spectral channels every 3 seconds with a spectral resolution of 15 Angstroms and an effective field-of-view of approximately 300 km(exp 2). The only gaseous absorption in the 2000 to 3000 Angstrom region was assumed to come from the Hartley band system of ozone, and therefore the amount of ozone was inferred by fitting this absorption feature with laboratory data of ozone absorption. Mars O3 as inferred from these spectra shows strong seasonal and latitudinal variation, with column abundances ranging from 0.2 microns at equatorial latitudes to 60 microns over the northern winter polar latitudes. The detectability limit of the spectrometer was approximately 3 microns. I use a radiative transfer model based on the discrete ordinate method to calculate synthetic radiance spectra. When typical amounts of dust and cloud are present, significant underestimation of O3 occurs. A factor of 3 times as much O3 is needed to generate the same spectrum for cloudy, dusty atmospheres as for a clear atmosphere. If the scattering properties of Martian clouds and dust were well known, then their appearance would not be a problem, as a model would be capable of retrieving the O3 abundance. However, these properties are not well known, which raises doubts about the effectiveness of the current UV spectroscopy technique used to measure O3. Spatial and temporal variability in temperature and water vapor have been claimed to account for the scatter of the data points. However, water vapor is a small source of odd hydrogen in the winter polar atmosphere, and may not account for most of the variability. Masking by clouds and dust may also account for some of the observed O3 variability, because the nature and opacity of the clouds and dust in the polar hood change dramatically in latitude and even on a day-to-day basis. As the maximum O3 abundance resides near the surface, spacecraft must be able to observe through the entire cloud and dust abundance in order to actually see the total O3 column abundance. If reflectance spectroscopy is used, as on Mariner 9, then the cloud and the airborne dust must be traversed twice; first by the incoming solar flux down to the surface, and then once again upon reflection from the surface out to the spacecraft.

Lindner, Bernhard Lee↗

Infrared reflectance spectra (4-12 microns) of typical lunar samples

A laboratory study of the mid-infrared spectral reflectance properties of typical Apollo lunar rock and soil samples was conducted using a modern interferometric spectrometer. The results show that characteristic spectral features exist in the 4-12 micrometer range that are diagnostic of rock composition and mineralogy, especially for the plagioclase-rich rocks and soils. This is the first phase of a comprehensive infrared reflectance study under way to better understand the use of infrared emission spectroscopy for mapping the surface composition of the moon and other silicate bodies.

Nash, Douglas B.↗

Spectral bidirectional reflectance and effects on vegetation indices for a prairie grassland

Preliminary results of bidirectional reflectance data from two radiometric devices are presented and considered in the light of surface biophysical properties that affect surface radiometric parameters. The Portable Apparatus for Rapid Acquisition of Bidirectional Observations of the Land and Atmosphere and a high spectral continuous-wavelength spectroradiometer called the SE590 are employed to study hemispherical-conical reflectance factors. Examples of the resulting data sets are presented which show that the normalized-difference vegetation index and the Simple-Ratio vegetation index depend on the solar zenith and sensor-view zenith angles. Consideration is given to the importance of latitude, season, and time of day in interpreting the results of the indices since these factors can significantly affect the interpretive parameters.

Deering, D. W.↗

Surface albedo from bidirectional reflectance

The validity of integrating over discrete wavelength bands is examined to estimate total shortwave bidirectional reflectance of vegetated and bare soil surfaces. Methods for estimating albedo from multiple angle, discrete wavelength band radiometer measurements are studied. These methods include a numerical integration technique and the integration of an empirically derived equation for bidirectional reflectance. It is concluded that shortwave albedos estimated through both techniques agree favorably with the independent pyranometer measurements. Absolute rms errors are found to be 0.5 percent or less for both grass sod and bare soil surfaces.

Ranson, K. J.↗

Polarization of light reflected by crop canopies

This paper presents an analysis of polarization measurements acquired over corn and soybean crop canopies. Simultaneous plant physiological data and canopy polarization and reflectance data were collected before and after the tasseling development stage of the corn canopy, and before and during a period when the soybean canopy was water stressed. A simple model based upon the hypothesis that leaves specularly reflect light according to the Fresnel equations relates the observed bidirectional effects to the architectural and phenological conditions of the canopy.

Rondeaux, Genevieve↗

Scattering behavior of Lunar Lake playa determined from parabola bidirectional reflectance data

Bidirectional reflectance data obtained with the Portable Apparatus for Rapid Acquisition of Bidirectional Observations of Land and Atmosphere instrument at Lunar Lake, Nevada, were analyzed to determine the scattering properties of playas. The data are approximated by a Lambertian function, except at high phase angles in the solar principal plane, where Fresnel reflectance appears to dominate. The data also depart slightly (15 percent) from a Lambertian function at high emission angles in all azimuthal planes. No published photometric model accounts for the observed data. It is hypothesized that the observed scattering behavior is the superposition of volume and surface (Fresnel) scattering mechanisms.

Shepard, Michael K.↗

Diffuse reflection from a stochastically bounded, semi-infinite medium

In order to determine the diffuse reflection from a medium bounded by a rough surface, the problem of radiative transfer in a boundary layer characterized by a statistical distribution of heights is considered. For the case that the surface is defined by a multivariate normal probability density, the propagation probability for rays traversing the boundary layer is derived and, from that probability, a corresponding radiative transfer equation. A solution of the Eddington (two stream) type is found explicitly, and examples are given. The results should be applicable to reflection from the regoliths of solar system bodies, as well as from a rough ocean surface.

Lumme, K.↗

Estimators of bottom reflectance spectra

Estimators of in situ bottom spectral reflectance are calculated from multi-station optical field data gathered with standard instrumentation from different sites. These spectra are then compared to reflectance spectra measured in the laboratory of the bottom sediments collected in the field for the stations at these different sites. The relative fit of the estimated spectral curves to those measured in the laboratory was measured. The most accurate absolute estimation was provided by the single scattering irradiance model.

Estep, L.↗

Reflectance spectroscopy of fresh whole leaves for the estimation of chemical concentration

Remotely sensed plant-canopy data in the visible and near-IR ranges are used to establish relations between the canopy reflectance and the chemical content of the leaves. The mathematical relation is generated by means of stepwise regression based on the derivative reflectance at certain wavelengths. Fourier filtering and sample control are used to minimize instrument noise and spectral overlap respectively, and absorption features are noted that correspond to sugar and protein. The coefficients of determination between estimated and measured concentrations are at least 0.82 for such substances as starch and chlorophyll. It is recommended in the analysis of remotly sensed canopy data that the chemicals with strong spectral overlaps with the chemical of interest be accounted for in order to estimate foliar chemical concentrations accurately.

Curran, Paul J.↗

Simple algorithms for remote determination of mineral abundances and particle sizes from reflectance spectra

Algorithms were developed, based on Hapke's (1981) equations, for remote determinations of mineral abundances and particle sizes from reflectance spectra. In this method, spectra are modeled as a function of end-member abundances and illumination/viewing geometry. The method was tested on a laboratory data set. It is emphasized that, although there exist more sophisticated models, the present algorithms are particularly suited for remotely sensed data, where little opportunity exists to independently measure reflectance versus article size and phase function.

Johnson, Paul E.↗

Reflectance spectroscopy of palagonite and iron-rich montmorillonite clay mixtures - Implications for the surface composition of Mars

The diffuse reflectance spectra of Hawaiian palagonite mixtures with an Fe-rich montmorillonite have prompted their present use as spectral analogs of the Martian surface. Like the Mars spectrum and unlike clays, the 2.2-micron reflectance spectrum absorption band is not present in the palagonite sample; neither is the 2.2-micron Al-OH clay lattice band seen in palagonite-montmorillonite mixtures, where the latter component remains below 15 wt pct. Fe-rich montmorillonite clay may therefore be present in Mars, in combination with palagonite, while remaining undetected in remotely sensed spectra.

Orenberg, James↗

Shinnery oak bidirectional reflectance properties and canopy model inversion

Field measurements are presented, together with the results of a 3D canopy-model inversion for sand shinnery oak community in western Texas. The spectral bidirectional radiance measurements were in three spectral channels encompassing both the complete land surface and sky hemispheres. The changes in canopy reflectance that occur with variations in solar zenith angle and view direction for two seasons of the year were evaluated, and the 3D radiation-interaction model was inverted to estimate the oak leaf area index and canopy density from the reflectance data.

Deering, Donald W.↗

Directional and spectral reflectance of the Kuwait oil-fire smoke

The angular reflectance pattern of the Kuwait oil-fire smoke was measured from an aircraft at 13 discrete wavelengths between 0.5 and 2.3 microns. Measurements at 0.75 and 1.64 micron showed that the reflectance of the smoke layer was about 12 percent in the nadir direction, with considerable limb brightening toward the horizon. Furthermore, these observations revealed a backscattering maximum in the antisolar direction and an enhanced scattering near the rainbow direction. These characteristics suggest that the smoke layer 90 km downwind of the Kuwait oil fires was composed of a significant number of oil drizzle droplets that scatter solar radiation as a layer composed of spherical particles.

King, Michael D.↗

Suppressing Spurious Reflections In An Interferometer

Dynamic-aperture fringe discriminator is simple device enhancing operation of interferometer of spherical-wave-front type used to test lenses, telescopes, and other optical instruments. Device suppresses reflections from surfaces of refractive optical elements in instrument and/or test setup. Reflections from refractive optical components eliminated by blocking half of interferometer aperture.

Steimle, Lawrence J.↗

Exoskeleton master controller with force-reflecting telepresence

A thorough understanding of the requirements for successful master-slave robotic systems is becoming increasingly desirable. Such systems can aid in the accomplishment of tasks that are hazardous or inaccessible to humans. Although a history of use has proven master-slave systems to be viable, system requirements and the impact of specifications on the human factors side of system performance are not well known. In support of the next phase of teleoperation research being conducted at the Armstrong Research Laboratory, a force-reflecting, seven degree of freedom exoskeleton for master-slave teleoperation has been concepted, and is presently being developed. The exoskeleton has a unique kinematic structure that complements the structure of the human arm. It provides a natural means for teleoperating a dexterous, possibly redundant manipulator. It allows ease of use without operator fatigue and faithfully follows human arm and wrist motions. Reflected forces and moments are remotely transmitted to the operator hand grip using a cable transmission scheme. This paper presents the exoskeleton concept and development results to date. Conceptual design, hardware, algorithms, computer architecture, and software are covered.

Burke, James B.↗

Automation of the targeting and reflective alignment concept

The automated alignment system, described herein, employs a reflective, passive (requiring no power) target and includes a PC-based imaging system and one camera mounted on a six degree of freedom robot manipulator. The system detects and corrects for manipulator misalignment in three translational and three rotational directions by employing the Targeting and Reflective Alignment Concept (TRAC), which simplifies alignment by decoupling translational and rotational alignment control. The concept uses information on the camera and the target's relative position based on video feedback from the camera. These relative positions are converted into alignment errors and minimized by motions of the robot. The system is robust to exogenous lighting by virtue of a subtraction algorithm which enables the camera to only see the target. These capabilities are realized with relatively minimal complexity and expense.

Redfield, Robin C.↗