Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “prediction models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Tunable plasmon-enhanced second-order optical nonlinearity in transition-metal dichalcogenide nanotriangles (Final Report for SC0008712)

The control of light-matter interaction at the nanoscale is a grand challenge that cuts across modern photonics, plasmonics, and optoelectronics. The development of simulation tools for predictive modeling of nanostructured light emitters and absorbers is critical to successfully tackling this grand challenge. Existing state-of-the-art tools are not suitable for the following reasons: a) Phenomenological models of materials, commonly employed in the full-wave solutions to Maxwell’s equations, are fit to experimental data for bulk materials and fall short when attempting to analyze nanostructures. b) Nonlinearities in optical response can arise solely from nanostructuring, and require time-dependent quantum electronic transport techniques to capture. c) Emergent materials with exotic and tunable physical properties are increasingly used, but their properties are very sensitive to the substrate, impurities, and edge termination, and require an accurate description of interband and intraband processes, as well as dissipation. d) Microscopic modeling of electronic transport usually employs simplified electrodynamics, and realistic models that couple full electronic transport with full-wave electrodynamics are needed for accurate photonics simulations. The objective of this project was to computational tools that will overcome the limitations faced by current modeling tools and provide an unprecedented level of accuracy for predictive modeling of light-matter interaction at the nanoscale.

36 MATERIALS SCIENCE↗
NASA NTRS1993

The 3-D CFD modeling of gas turbine combustor-integral bleed flow interaction

An advanced 3-D Computational Fluid Dynamics (CFD) model was developed to analyze the flow interaction between a gas turbine combustor and an integral bleed plenum. In this model, the elliptic governing equations of continuity, momentum and the k-e turbulence model were solved on a boundary-fitted, curvilinear, orthogonal grid system. The model was first validated against test data from public literature and then applied to a gas turbine combustor with integral bleed. The model predictions agreed well with data from combustor rig testing. The model predictions also indicated strong flow interaction between the combustor and the integral bleed. Integral bleed flow distribution was found to have a great effect on the pressure distribution around the gas turbine combustor.

Chen, D. Y.↗
DOE OSTI2021

Challenges and Potential of Waveform Modeling for Crustal Scale Predictions

Waveform modeling is crucial to improving our understanding of observed seismograms. Forward simulation of wavefields provides quantitative methods of testing interactions between complicated source functions and the propagation medium. Here, we discuss three experiments designed to improve under standing of high frequency seismic wave propagation. First, we compare observed and predicted travel times of crustal phases for a set of real observed earthquakes with calculations and synthetic seismograms. Second, we estimate the frequency content of a series of nearly co-located earthquakes of varying magnitude for which we have a relatively well- known 1D velocity model. Third, we apply stochastic perturbations on top of a 3D tomographic model and qualitatively assess how those variations map to differences in the seismograms. While different in scope and aim, these three vignettes illustrate the current state of crustal scale waveform modeling and the potential for future studies to better constrain the structure of the crust.

58 GEOSCIENCES↗
DOE OSTI2026

The Use of Machine Learning Models for Predicting the Dielectric Strength of Gases

Technological advancements in high voltage systems have pushed sulfur hexafluoride (SF6) to its operational limits. Furthermore, this gas has other drawbacks including a high liquefaction temperature and a high global warming potential. Therefore, there has been an urgent need to find alternative gases with high dielectric strength (DS). In this work, density functional theory (DFT) is used to calculate molecular descriptors that are fed into an artificial neural network (ANN) and a random forest (RF). These machine learning (ML) models are then used to predict the DS for hundreds of molecules. A finite element model (FEM) is also used to calculate the electric field profile of multiple simple electrode geometries as the applied voltage to the system is increased. Results indicate that the random forest model has better generalization to unseen data than the neural network. The highest DS value predicted by the RF was 2.16 relative to the experimental DS of SF6. The results also demonstrate how choosing a gas with a higher DS and a geometry with minimal edges and corners can significantly increase the operating voltage of an electrical system. Due to its superior generalization, the RF represents the most promising path toward an accurate DS predictor once sufficient experimental data are available.

Mileski, Matthew [AFIT]↗
DOE OSTI2022

Influence of sequential stimulation practices on geochemical alteration of shale

Water-based hydraulic fracturing fluids (HFFs) can chemically interact with formation shale, resulting in altered porosity and permeability of the host rock. Experimental investigations of spatial and temporal shale-HFF interactions are helpful in interpreting chemical compositions of the injectate, as well as predicting alteration of hydraulic properties in the reservoir due to mineral dissolution and precipitation. Most bench-top experiments designed to study shale-HFF chemical interactions, either using batch reactors or flow-through setups, are carried out assuming that the acid spearhead has already become mixed with neutral HFFs. During operations, however, HFFs are typically injected according to a sequenced pumping schedule, starting with a concentrated acid spearhead, followed by multiple additions of near-neutral pH HFFs containing chemical amendments and proppant. In this study, we use geochemical modeling to consider whether this pre-mixed experimental protocol provides results directly comparable to a sequential discrete fluid-shale interaction protocol. Our results show that for the batch system, the transient evolution in major ion concentrations is faster with the sequential procedure. After 2 h of reaction time, the two protocols converge to the same aqueous concentrations. In a flow-through geometry, the pre-mixed model predicts extensive chemical alteration close to the injection point but negligible alteration downstream. In contrast, the sequential model predicts mineral reactions over hundreds of meters along the flow path. The extent of shale alteration in the sequential model at a given location depends on shale mineralogy and where the acid spearhead resides during the shut-in period. The predictive model developed in this study can help experimentalists to design bench-top tests and operators to better translate the results of laboratory experiments into practical applications.

Li, Qingyun↗
DOE OSTI2021

Improving Short Term Predictability of Hydrologic Models with Deep Learning

Focal Area: Focal Area 2. Predictive modeling through the use of AI techniques and AI-derived model components; the use of AI and other tools to design a prediction system comprising of a hierarchy of models (e.g., AI driven model/component/parameterization selection). Science Challenge: A major challenge exists in the lack of reliable predictive modeling of water-cycle extremes using macro-scale hydrologic models that are driven by atmospheric climate data. This causes a critical knowledge gap in understanding the magnitudes, probabilities, and severity of droughts, rainfall, and flooding. Improved understanding of these extreme events requires more accurate modeling at high spatial and temporal resolutions. This shortcoming is especially apparent when complex couplings between atmospheric quantities and engineered systems emerge, such as during extreme precipitation or drought events and at intersections of atmospheric-land-fluvial-ocean systems. Added complexity around representing operations of engineered infrastructure leads to a limited capability to analyze the temporal and spatial implications of compounding extreme events across inland and coastal regions. This results in profound challenges for water and power systems operators, agriculture production, and regional infrastructure planning. The science challenge can be summarized as How can we use AI/ML to improve short term predictability of extreme water-cycle events and associated risk, especially compounding events and extreme rainfall patterns that result in flooding, to inland and coastal communities under different climate scenarios?

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2021

Machine Learning the COSMO Model for Predicting Thermodynamics of Electrolyte Mixtures

Bottom-up design of electrolyte mixtures for battery systems requires predicting macro thermodynamic properties from molecular constituents. For instance, molten salt electrolyte batteries require conditions far above room temperature to operate. Therefore, discovering mixtures with increasingly lower eutectic melting points is desirable. A model that can approximate chemical activity is a valuable tool to search through the vast compositional design space. Machine learning can predict properties of materials such as vibrational free energies, electronic energy gaps, and thermal conductivities. Moreover, they can learn physical models such as interatomic potentials. The COSMO-SAC model uses theory and empirical parameterization to predict liquid-vapor and liquid-solid properties using first-principles calculations. However, obtaining activity coefficients required for parameterizing the COSMO-SAC model is costly and limited to a select chemical space. In this work, we explored if machine learning methods could improve the COSMO-SAC model and bridge density functional theory calculations to liquid phase thermodynamic properties. Our data-driven approach uses existing databases for sigma-profiles of organic solvents and reconciles their methodological differences via ensemble averaging. First, an optimal machine learning model is constructed for each dataset. Our machine learning algorithms use the sigma-profile as an input feature to predict binary mixtures' activity coefficients using multi-output regression. Each dataset uses different choices of functionals, methods, and basis sets. Therefore, our ensemble model attempts to predict corrected activity coefficients given the combination of all the model outputs. The activity coefficients used for training are generated using the COSMO-SAC model. This approach enables the extraction of meaningful information from the existing datasets to improve the COSMO-SAC model for obtaining thermodynamic properties of electrolyte mixtures. With the liquid phase activities, we can identify electrolyte mixtures that meet desired phase equilibria conditions.

Thermodynamics↗
DOE OSTI2021

DEPRECATED AI-Batt-OS (Autonomous Identification of Battery Life Models - Open Source) [SWR 21-17]

DEPRECATED. This repository was archived by the owner on Jun 30, 2026. It is now read-only. Open source implementation of some of the methods utilized by AI-Batt, a battery lifetime modeling and analysis toolkit provided by the National Laboratory of the Rockies (NLR). This software demonstrates the use of bi-level optimization and symbolic regression techniques to semi-autonomously identify algebraic models predicting the capacity fade of lithium-ion batteries during calendar aging. Modeling the degradation of batteries is a complex task, due to the difficulty in separating the time-dependent and time-independent factors impacting cell level degradation, across multiple data series with different numbers of measurements and/or data quality. Bi-level optimization enables model parameters to be optimized to either the entire data set or to individual data series, allowing statistical disambiguation of global behaviors (data series independent) and local behaviors (data series dependent). Symbolic regression is used to automatically search for optimal low-dimesional models predicting the variation of locally optimized parameters versus time-independent experimental variables from millions of possible models, resulting in a more accurate and repeatable model identification process than is possible by a manual search. The provided tools also implement cross-validation and bootstrap resampling schemes, empowering statistical model comparison/selection and quantification of model uncertainties. An example script replicates the results from the manuscript "Challenging Practices of Algebraic Battery Life Models through Statistical Validation and Model Identification via Machine-Learning", submitted to ECS. All code is written in MATLAB. Requires the Statistics and Machine Learning Toolbox. Contact Dr. Paul Gasper at Paul.Gasper@nlr.gov for any questions.

Gasper, Paul↗
DOE OSTI2021

Development of Explainable, Knowledge-Guided AI Models to Enhance the E3SM Land Model Development and Uncertainty Quantification

Focal Area(s): (2)Predictive modeling using AI techniques and AI-derived model components; use of AI and other tools to design a prediction system comprising of a hierarchy of models. (3) Insight gleaned from complex data (both observed and simulated) using AI, big data analytics, and other advanced methods, including explainable AI and physics- or knowledge- guided AI. Science Challenge: The Energy Exascale Earth System Model (E3SM) is a fully coupled, state-of-the-science Earth system model that uses code optimized for DOE's advanced computers to address the most critical scientific questions facing our nation and society (Golaz et al., 2019). The E3SM Land model (ELM) is designed to understand how the changes in terrestrial land surfaces will interact with other Earth system components and has been used to understand hydrologic cycles, biogeophysics, and ecosystem dynamics. In spite of great successes, the ELM has several known issues that restrain rapid improvements. For example, the ELM uses equilibrium models to simulate dynamic land-climate interactions and it requires long model spin-up time to identify suitable initial conditions for transient simulations. The ELM lacks built-in uncertainty mechanisms that can improve the robustness of model predictions. The ELM is a holistic, deterministic model system with a rigid design, and in many situations, it is hard to modify the ELM system to incorporate new theory/hypothesis and new data across scales to address emerging science problems (such as predicting the impacts of water cycle extremes). In addition, The ELM is technically optimized for traditional CPU-centric computers and it cannot fully utilize the current and incoming leadership computers for model simulations and uncertainty quantification (UQ). The success of artificial intelligence (AI) has inspired scientists to use AI models to discover intrinsic features from simulation data (Chattopadhyay et al., 2020) and observational data (Reichstein et al., 2019) to gain further process understanding of Earth science problems. However, autonomous AI model training through deep learning usually requires a huge amount of annotated data. To overcome the limitations from the data and computing resources, knowledge-guided AI models are necessary where human-knowledge is ingested in model construction (Banino et al., 2018) and training process (Silver et al., 2016) for efficient learning. Herein, we present a new way that leverages the process understanding from the ELM to guide AI model development for the ELM enhancement and UQ. We hope this study can inspire further Earth and environmental system model developments and transformations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Integration of Biorelevant Pediatric Dissolution Methodology into PBPK Modeling to Predict In Vivo Performance and Bioequivalence of Generic Drugs in Pediatric Populations: a Carbamazepine Case Study

This study investigated the impact of gastro-intestinal fluid volume and bile salt (BS) concentration on the dissolution of carbamazepine (CBZ) immediate release (IR) 100 mg tablets and to integrate these in vitro biorelevant dissolution profiles into physiologically based pharmacokinetic modelling (PBPK) in pediatric and adult populations to determine the biopredictive dissolution profile. Dissolution profiles of CBZ IR tablets (100 mg) were generated in 50–900 mL biorelevant adult fasted state simulated gastric and intestinal fluid (Ad-FaSSGF and Ad-FaSSIF), also in three alternative compositions of biorelevant pediatric FaSSGF and FaSSIF medias at 200 mL. This study found that CBZ dissolution was poorly sensitive to changes in the composition of the biorelevant media, where dissimilar dissolution (F2 = 46.2) was only observed when the BS concentration was changed from 3000 to 89 μM (Ad-FaSSIF vs Ped-FaSSIF 50% 14 BS). PBPK modeling demonstrated the most predictive dissolution volume and media composition to forecast the PK was 500 mL of Ad-FaSSGF/Ad-FaSSIF media for adults and 200 mL Ped-FaSSGF/FaSSIF media for pediatrics. A virtual bioequivalence simulation was conducted by using Ad-FaSSGF and/or Ad-FaSSIF 500 mL or Ped-FaSSGF and/or Ped-FaSSIF 200 mL dissolution data for CBZ 100 mg (reference and generic test) IR product. The CBZ PBPK models showed bioequivalence of the product. This study demonstrates that the integration of biorelevant dissolution data can predict the PK profile of a poorly soluble drug in both populations. Further work using more pediatric drug products is needed to verify biorelevant dissolution data to predict the in vivo performance in pediatrics.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

The use of digital thread for reconstruction of local fiber orientation in a compression molded pin bracket via deep learning

A deep convolutional neural network (DCNN) was used for microstructure reconstruction using artificial intelligence (MR-AI) by predicting local average fiber orientation distributions (FOD) in a 3D prepreg platelet molded composite (PPMC) pin bracket. To train the MR-AI model, surface strain fields from residual stresses simulated in PPMC plates were used as the input to the DCNN. A training dataset included PPMC plates with various degrees of global fiber alignment, based on the information obtained from high-fidelity flow simulation of a pin bracket. Further, the MR-AI model was then deployed to analyze FOD in the 3D pin bracket by conducting thermo-elastic residual stress analysis. Initially, the MR-AI model was established entirely on the synthetic simulation data. Then, a μCT scan of a physically molded pin bracket was used to create a finite element model that provided data for additional validation of the DCNN model. For the μCT scan finite element pin bracket the MR-AI model predicted the distribution of fiber orientation tensor components with MAE of 0.10 indicating a global prediction error of 10%. For the flow simulated pin bracket, the MR-AI model predicted the distribution of fiber orientation tensor components with a global prediction error of 11%. The MR-AI model showed the ability to predict regions of varying alignment in the base and flange of the pin bracket. The proposed MR-AI methodology allows for rapid prediction of FOD in geometrically complex parts and offers a promising path to detecting unique fiber orientation states in molded components.

42 ENGINEERING↗
DOE OSTI2020

Predictive Integrated Modeling of Heated Tokamak Plasmas (Final Technical Report)

The research carried out by the Lehigh University fusion group during this reporting period: (1) Self-consistent predictive core-pedestal ITER scenario modeling; (2) Microtearing instabilities and electron thermal transport in standard and spherical tokamak discharges; (3) Neural network model of the Multi-Mode anomalous transport module; (4) Anomalous transport in KSTAR, JET, EAST, Alcator C-Mod and DIII-D discharges; (5) Theory for transport in magnetized plasmas; (6) Control-oriented modeling of the q-profile dynamic response in preparation for advanced scenario control in KSTAR and in EAST; (7) Modeling of edge harmonic oscillation in DIII-D QH mode discharges; (8) Elucidating plasma dynamics in Hasegawa-Wakatani turbulence by information geometry; (9) Non-linear Langevin and Fractional Fokker–Planck equations for anomalous diffusion by Levy stable processes; and (10) Investigation of the plasma shaping effects on the H-mode pedestal structure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Accelerated screening of functional atomic impurities in halide perovskites using high-throughput computations and machine learning

The pressing need for novel materials that can serve rising demands in solar cell and optoelectronic technologies makes the nexus of halide perovskites, high-throughput computations, and machine learning, very promising. Ever increasing amounts of data on the structure, fundamental properties, and device performance of halide perovskites provide opportunities for learning chemical rules and design principles that make these materials attractive, and applying them across wide chemical spaces. In this work, we show that impurity properties of halide perovskites computed using density functional theory (DFT) can be combined with machine learning (ML) to deliver predictive models and quick identification of optoelectronically active impurity atoms. Our computation lead to the largest reported dataset of the formation energies and charge transition levels of Pb-site impurities in methylammonium lead halide (MAPbX 3 ) perovskites. Descriptors are defined to uniquely represent any impurity atom in any MAPbX 3 compound and mapped to the computed impurity properties using regression techniques such as Gaussian process regression, neural networks, and random forests. We use the best optimized predictive models to make predictions for hundreds of impurities across 9 MAPbX 3 compounds and create lists of dominating impurities, that is, impurities that can shift the equilibrium Fermi level in the perovskite as determined by native point defects. Finally, this accelerated screening powered by computations and machine learning can guide the identification of problematic impurities that may cause undesired recombination of charge carriers, as well as impurities that can be deliberately introduced to tune the perovskite conductivity and resulting photovoltaic absorption.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Estimating risk for earth-satellite attenuation prediction

Annual cumulative distributions of attenuation measurements and of rain-rate measurements were obtained from several locations in Europe and the United States. They were analyzed to estimate the year-to-year variability to be associated with a prediction of the expected cumulative distribution. Two models were constructed to estimate variability, an ad hoc model that summarized a number of observations when compared to model predictions and a probabilistic model that applied the ideas of order statistics to the prediction problem when the number of independent attenuation or rain-rate events in a sample year could be estimated. Based on these models, the statistical uncertainty in a model prediction may be estimated. The estimation procedure also provides an answer to the question of the number of years of observation needed to provide an estimate of the empirical distribution with a specified statistical uncertainty.

Crane, Robert K.↗
DOE OSTI2024

Versatile stochastic model for predictive KMC simulation of fcc metal nanostructure evolution with realistic kinetics

Stochastic lattice-gas models provide the natural framework for analysis of the surface diffusion-mediated evolution of crystalline metal nanostructures on the appropriate time scale (often 10 1 –10 4 s) and length scale. Model behavior can be precisely assessed by kinetic Monte Carlo simulation, typically incorporating a rejection-free algorithm to efficiently handle the broad range of Arrhenius rates for hopping of surface atoms. The model should realistically prescribe these rates, or the associated barriers, for a diversity of local surface environments. However, commonly used generic choices for barriers fail, even qualitatively, to simultaneously describe diffusion for different low-index facets, for terrace vs step edge diffusion, etc. We introduce an alternative Unconventional Interaction–Conventional Interaction formalism to prescribe these barriers, which, even with few parameters, can realistically capture most aspects of behavior. Here, the model is illustrated for single-component fcc metal systems, mainly for the case of Ag. It is quite versatile and can be applied to describe both the post-deposition evolution of 2D nanostructures in homoepitaxial thin films (e.g., reshaping and coalescence of 2D islands) and the post-synthesis evolution of 3D nanocrystals (e.g., reshaping of nanocrystals synthesized with various faceted non-equilibrium shapes back to 3D equilibrium Wulff shapes).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1979

Econometric models for predicting confusion crop ratios

Results for both the United States and Canada show that econometric models can provide estimates of confusion crop ratios that are more accurate than historical ratios. Whether these models can support the LACIE 90/90 accuracy criterion is uncertain. In the United States, experimenting with additional model formulations could provide improved methods models in some CRD's, particularly in winter wheat. Improved models may also be possible for the Canadian CD's. The more aggressive province/state models outperformed individual CD/CRD models. This result was expected partly because acreage statistics are based on sampling procedures, and the sampling precision declines from the province/state to the CD/CRD level. Declining sampling precision and the need to substitute province/state data for the CD/CRD data introduced measurement error into the CD/CRD models.

Umberger, D. E.↗
NASA NTRS1994

The Use of a Two-Dimensional, Time-Dependent Cloud Model to Predict Convective and Stratiform Clouds and Precipitation

A two-dimensional, time-dependent cloud model has been used in two field projects to forecast the convective development during the day from the morning sounding. In effect, the cloud model gives a dynamic analysis of the sounding as affected by heating and evaporation at the earth's surface, divergence of the winds throughout the atmosphere, and cloud shadow effects. During the initial project, the Cooperative Huntsville Meteorological Experiment, the results were mixed. Model runs were easily made when soundings were available. but displaying the results in a meaningful and useful way was the limiting factor. In a later experiment, the North Dakota Thunderstorm Project, the problem of displaying results was overcome and soundings were available from the local weather service forecast office with a high degree of reliability. The experimental model correctly forecasts convective development about 80% of the time, and precipitation or no precipitation more than 70% of the time.

Kopp, Fred J.↗