Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “permeability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Evaluation of accuracy and convergence of numerical coupling approaches for poroelasticity benchmark problems

Accurate modeling of subsurface flow and transport processes is vital as the prevalence of subsurface activities such as carbon sequestration, geothermal recovery, and nuclear waste disposal increases. Computational modeling of these problems leverages poroelasticity theory, which describes coupled fluid flow and mechanical deformation. Although fully coupled monolithic schemes are accurate for coupled problems, they can demand significant computational resources for large problems. In this work, a fixed stress scheme is implemented into the Sandia Sierra Multiphysics toolkit. Two implementation methods, along with the fully coupled method, are verified with one-dimensional (1D) Terzaghi, 2D Mandel, and 3D Cryer sphere benchmark problems. The impact of a range of material parameters and convergence tolerances on numerical accuracy and efficiency was evaluated. Overall the fixed stress schemes achieved acceptable numerical accuracy and efficiency compared to the fully coupled scheme. However, the accuracy of the fixed stress scheme tends to decrease with low permeable cases, requiring the finer tolerance to achieve a desired numerical accuracy. For the fully coupled scheme, high numerical accuracy was observed in most of cases except a low permeability case where an order of magnitude finer tolerance was required for accurate results. Finally, a two-layer Terzaghi problem and an injection–production well system were used to demonstrate the applicability of findings from the benchmark problems for more realistic conditions over a range of permeability. Simulation results suggest that the fixed stress scheme provides accurate solutions for all cases considered with the proper adjustment of the tolerance. Furthermore, this work clearly demonstrates the robustness of the fixed stress scheme for coupled poroelastic problems, while a cautious selection of numerical tolerance may be required under certain conditions with low permeable materials.

58 GEOSCIENCES↗

CO 2 storage and potential fault instability in the St. Lawrence Lowlands sedimentary basin (Quebec, Canada): Insights from coupled reservoir-geomechanical modeling

In this paper, coupled reservoir-geomechanical (TOUGH-FLAC) modeling is applied for the first time to the St. Lawrence Lowlands region to evaluate the potential for shear failure along pre-existing high-angle normal faults, as well as the potential for tensile failure in the caprock units (Utica Shale and Lorraine Group). This activity is part of a general assessment of the potential for safe CO 2 injection into a sandstone reservoir (the Covey Hill Formation) within an Early Paleozoic sedimentary basin. Field and subsurface data are used to estimate the sealing properties of two reservoir-bounding faults (Yamaska and Champlain faults). The spatial variations in fluid pressure, effective minimum horizontal stress, and shear strain are calculated for different injection rates, using a simplified 2D geological model of the Becancour area, located ~110 km southwest of Quebec City. The simulation results show that initial fault permeability affects the timing, localization, rate, and length of fault shear slip. Contrary to the conventional view, our results suggest that shear failure may start earlier for a permeable fault than for a sealing fault, depending on the site-specific geologic setting. In simulations of a permeable fault, shear slip is nucleated along a 60 m long fault segment in a thin and brittle caprock unit (Utica Shale) trapped below a thicker and more ductile caprock unit (Lorraine Group) – and then subsequently progresses up to the surface. In the case of a sealing fault, shear failure occurs later in time and is localized along a fault segment (300 m) below the caprock units. The presence of the inclined low-permeable Yamaska Fault close to the injection well causes asymmetric fluid-pressure buildup and lateral migration of the CO 2 plume away from the fault, reducing the overall risk of CO 2 leakage along faults. Finally, fluid-pressure-induced tensile fracturing occurs only under extremely high injection rates and is localized below the caprock units, which remain intact, preventing upward CO 2 migration.

58 GEOSCIENCES↗

Simulating the Cranfield geological carbon sequestration project with high-resolution static models and an accurate equation of state

In this study, a field-scale carbon dioxide (CO 2 ) injection pilot project was conducted as part of the Southeast Regional Sequestration Partnership (SECARB) at Cranfield, Mississippi. We present higher-order finite element simulations of the compositional two-phase CO 2 -brine flow and transport during the experiment. High- resolution static models of the formation geology in the Detailed Area Study (DAS) located below the oil- water contact (brine saturated) are used to capture the impact of connected flow paths on breakthrough times in two observation wells. Phase behavior is described by the cubic-plus-association (CPA) equation of state, which takes into account the polar nature of water molecules. Parameter studies are performed to investigate the importance of Fickian diffusion, permeability heterogeneity, relative permeabilities, and capillarity. Simulation results for the pressure response in the injection well and the CO 2 breakthrough times at the observation wells show good agreement with the field data. For the high injection rates and short duration of the experiment, diffusion is relatively unimportant (high P clet numbers), while relative permeabilities have a profound impact on the pressure response. High-permeability pathways, created by fluvial deposits, strongly affect the CO 2 transport and highlight the importance of properly characterizing the formation heterogeneity in future carbon sequestration projects.

54 ENVIRONMENTAL SCIENCES↗

A semi-analytical method for simulating matrix diffusion in numerical transport models

We report a semi-analytical approximation for transient matrix diffusion is developed for use in numerical contaminant transport simulators. This method is an adaptation and extension of the heat conduction method of Vinsome and Westerveld (1980) used to simulate heat losses during thermally enhanced oil recovery. The semi-analytical method is used in place of discretization of the low permeability materials, and it represents the concentration profile in the low permeability materials with a fitting function that is adjusted in each element at each time-step. The resulting matrix diffusion fluxes are added to the numerical model as linear concentration-dependent source/sink terms. Since only the high permeability zones need to be discretized, the numerical formulation is extremely efficient compared to traditional approaches that require discretization of both the high and low permeability zones. The semi-analytical method compares favorably with the analytical solution for transient one-dimensional diffusion with first order decay, with a two-layer aquifer/aquitard solution, with the solution for transport in a fracture with matrix diffusion and decay, and with a fully numerical solution for transport in a thin sand zone bounded by clay with variable decay rates.

54 ENVIRONMENTAL SCIENCES↗

Identifying arbitrary parameter zonation using multiple level set functions

In this paper, we extended the analytical level set method [1, 2] for identifying a piece-wisely heterogeneous (zonation) binary system to the case with an arbitrary number of materials with unknown material properties. In the developed level set approach, starting from an initial guess, the material interfaces are propagated through iterations such that the residuals between the simulated and observed state variables (hydraulic head) is minimized. We derived an expression for the propagation velocity of the interface between any two materials, which is related to the permeability contrast between the materials on two sides of the interface, the sensitivity of the head to permeability, and the head residual. We also formulated an expression for updating the permeability of all materials, which is consistent with the steepest descent of the objective function. The developed approach has been demonstrated through many examples, ranging from totally synthetic cases to a case where the flow conditions are representative of a groundwater contaminant site at the Los Alamos National Laboratory. These examples indicate that the level set method can successfully identify zonation structures, even if the number of materials in the model domain is not exactly known in advance. Although the evolution of the material zonation depends on the initial guess field, inverse modeling runs starting with different initial guesses fields may converge to the similar final zonation structure. These examples also suggest that identifying interfaces of spatially distributed heterogeneities is more important than estimating their permeability values.

97 MATHEMATICS AND COMPUTING↗

Simulation of dilatancy-controlled gas migration processes in saturated bentonite using a coupled multiphase flow and elastoplastic H 2 M model

Dilatancy-controlled gas flow in preferential pathways plays a key role in the safety analysis of radioactive waste repositories. This is particularly the case for bentonite, an often-preferred barrier material. Gas flow in preferential pathways is characterized by localization and spontaneous behavior, which is challenging to simulate in numerical models due to strong hydro-mechanical coupling. To analyze a laboratory experiment in the framework of the DECOVALEX-2023 project, this study introduced a new approach of combining continuous modelling methods with spatial material properties derived from material heterogeneities and experimental observations. The proposed model utilized hydro-mechanical spatial distributions, namely Young's modulus and gas entry pressure, and elastoplasticity combined with a linear swelling model. A conceptual strain-dependent permeability approach simulated dilatancy-controlled gas flow based on hydro-mechanical coupling. To test the effectiveness of the presented approach, a gas injection test in a compacted, saturated bentonite sample was simulated using the open-source code OpenGeoSys 5.8 and compared with experimental observations. The presented methodology is capable of simulating localized gas flow in preferential pathways. The spatial distributions of Young's modulus and gas entry pressure affect the swelling pressure, relative permeability and, in combination with the strain-dependent permeability model, also the intrinsic permeability.

42 ENGINEERING↗

Evaluation of solitary waves as a mechanism for oil transport in poroelastic media: A case study of the South Eugene Island field, Gulf of Mexico basin

Hydrocarbons in shallow reservoirs of the Eugene Island 330 field in the Gulf of Mexico basin are thought to have migrated rapidly along low permeability sediments of the Red fault zone as discrete pressure pulses from source rocks at depths of about 4.5 km. The aim of this research was to evaluate the hypothesis that these pressure pulses represent solitary waves by investigating the mechanics of solitary wave formation and motion and wave oil transport capability. A two-dimensional numerical model of Eugene Island minibasin formation predicted overpressures at the hydrocarbon source depth to increase at an average rate of 30 Pa/yr, reaching 52 MPa by the present day and oil velocities of 1E-12 m/yr, far too low for kilometer scale oil transport to fill shallow Plio-Pleistocene reservoirs within the 3.6 million year minibasin history. Calculations from a separate one-dimensional model that used the pressure generation rate from the two-dimensional model showed that solitary waves could only form and migrate within sediments that have very low permeabilities between 1-25 to 1-24 m2 and that are highly overpressured to 91-93% of lithostatic pressure. Solitary waves were found to have a maximum pore volume of 105 m3, to travel a maximum distance of 1-2 km, and to have a maximum velocity of 1-3 m/yr. Based on these results, solitary waves are unlikely to have transported oil to the shallowest reservoirs in the Eugene Island field in a poroelastic fault gouge rheology at the pressure generation rates likely to have been caused by disequilibrium compaction and hydrocarbon generation. However, solitary waves could perhaps be important agents for oil transport in other locations where reservoirs are closer to the source rocks, where the pore space is occupied by more than one fluid, or where sudden fracturing of overpressured hydrocarbon source sediments would allow the solitary waves to propagate as shock waves. Hydrocarbons in shallow reservoirs of the Eugene Island 330 field in the Gulf of Mexico basin are thought to have migrated rapidly along low permeability sediments of the Red fault zone as discrete pressure pulses from source rocks at depths of about 4.5 km. The aim of this research was to evaluate the hypothesis that these pressure pulses represent solitary waves by investigating the mechanics of solitary wave formation and motion and wave oil transport capability. A two-dimensional numerical model of Eugene Island minibasin formation predicted overpressures at the hydrocarbon source depth to increase at an average rate of 30 Pa/yr, reaching 52 MPa by the present day and oil velocities of 1-12 m/yr, far too low for kilometer scale oil transport to fill shallow Plio-Pleistocene reservoirs within the 3.6 million year minibasin history. Calculations from a separate one-dimensional model that used the pressure generation rate from the two-dimensional model showed that solitary waves could only form and migrate within sediments that have very low permeabilities between 1-25 to 1-24 m2 and that are highly overpressured to 91-93% of lithostatic pressure. Solitary waves were found to have a maximum pore volume of 100,000 m3, to travel a maximum distance of 1-2 km, and to have a maximum velocity of 1-3 m/yr. Based on these results, solitary waves are unlikely to have transported oil to the shallowest reservoirs in the Eugene Island field in a poroelastic fault gouge rheology at the pressure generation rates likely to have been caused by disequilibrium compaction and hydrocarbon generation. However, solitary waves could perhaps be important agents for oil transport in other locations where reservoirs are closer to the source rocks, where the pore space is occupied by more than one fluid, or where sudden fracturing of overpressured hydrocarbon source sediments would allow the solitary waves to propagate as shock waves.

02 PETROLEUM↗

Shale-fluid interactions during forced lmbibition and flow-back

One way to minimize the need for disposal of flow-back waters produced during the hydraulic fracturing of unconventional reservoirs is, potentially, to recycle these fluids by recovering and re-injecting them during hydraulic fracturing of nearby new wells. These flow-back waters contain, however, large concentrations of dissolved salts. During hydraulic fracturing of unconventional reservoirs, a well may undergo extended shut-in periods, following the initial hydraulic-fracture stimulation. The concern here, therefore, is that the salts dissolved in the re-injected flow-back waters may precipitate in the subsurface, thus promoting scale formation; or alternately, because of their high salinity, these same fluids may cause the dissolution of various minerals present in the subsurface. Large divalent cations (e.g., Ca²⁺, Ba²⁺ and Sr²⁺) and anions (e.g., CO3²⁻ and SO4²) may chemically interact with and cause the swelling of clay fractions, thus blocking pores in certain pore size ranges. All these phenomena (i.e., scale formation, clay swelling, minerals dissolution) can influence the petrophysical properties of the formation, including its permeability, porosity, contact angle, etc. One way to potentially overcome some of these technical challenges, is to pre-treat these flow-back waters, prior to re-injection (e.g., via chemical precipitation, followed by membrane filtration) in order to remove unwanted salts. However, such pre-treatment is costly, and the degree of salt removal needed to prevent formation damage is important in determining the economic viability of flow-back water recycle via re-injection. A key focus of this work, therefore, is to study the impact that the injection of flow-back waters, that have undergone varying degrees of pre-treatment and clean-up, will have on the flow-through characteristics of a tight-gas reservoir, particularly of the Marcellus Shale formation. To do so, we have carried-out forced-imbibition experiments with shale samples from various depths in the Marcellus formation, whose properties span high to low ranges of TOC, clay content and matrix permeabilities. We have studied the forced-imbibition characteristics, at an injection pressure of 24,233 kPa (3500 psig), of various flow-back fluids into shale cores saturated with methane at a pore pressure of 17,338 kPa (2500 psig) and a confining stress of 27,680 kPa (4000 psig). Following the forced imbibition experiments, we analyzed the cores for potential changes in permeability and porosity. Quantification of the ion content of the injected and recovered fluids was also performed using Ion Chromatography (IC). The IC analysis of the recovered fluids indicates substantial interactions and geochemical reactions between the invading fluids and the shale cores. The injection of flow-back fluids shows significant impact on the flow-through characteristics, with untreated flow-back fluids, which have the highest cation and anion content, also exhibiting the highest observable reductions in permeability (>90%).

defects, mechanical behavior, carbon sequestration↗

An experimental feasibility study on the use of CO 2 -soluble polyfluoroacrylates for CO 2 mobility and conformance control applications

We report high molecular weight polyfluoroacrylate (PFA) is an amorphous, sticky, hydrophobic, oil-phobic, CO 2 -soluble homopolymer. 1 wt% PFA-in-CO 2 solutions are four times as viscous as pure CO 2 . Although these solutions provided modest mobility control, unexpectedly large increases in pressure drop occurred because a portion of the PFA adsorbed onto the pore surfaces, altering wettability and significantly permeability. Further, PFA exhibited diminished solubility in CO 2 in the presence of light extracted hydrocarbons. Although these effects rendered CO 2 -PFA solutions inappropriate for mobility control, excellent conformance control for dual parallel brine-saturated cores was attained when a CO 2 -PFA solution was first injected into the isolated high permeability sandstone core. This core was then placed in parallel with a low permeability sandstone core, and all of the subsequently injected CO 2 was diverted to the low permeability core. Conformance control was not as effective in limestone, possibly due the low pH-induced erosion of the limestone that mitigated PFA adsorption.

02 PETROLEUM↗

Understanding the impact of SPMAK and PEGPEA in crosslinked PEGDA membranes: Methanol-carboxylate co-transport behavior and correlating structure-physicochemical-transport properties

Investigating multicomponent transport in dense, hydrated polymer membranes is necessary in applications such as fuel cells, electrolyzers, and desalination systems. Of particular interest are photoelectrochemical CO 2 reduction cells (PEC-CRC) which produce liquid products such as alcohols (methanol) and carboxylates (formate, acetate). Flux coupling and competitive sorption behavior of these products (solutes) have been found to affect permselectivity, thereby motivating us to investigate fundamental membrane structure-physicochemical-transport relationships. Past research has shown that systematic tuning of crosslinked cation exchange membranes (CEMs) with charge-neutral monoacrylate monomers containing alkyl and phenyl groups (i.e., poly(ethylene glycol) methacrylate (PEGMA), and poly(ethylene glycol) phenyl ether acrylate (PEGPEA)) can suppress acetate transport (permeability) in co-permeation with methanol. To further investigate this transport behavior and to enhance membrane ionic conductivities, 3-sulfopropyl methacrylate potassium (SPMAK), a sulfonated monoacrylate monomer is incorporated here. SPMAK content is varied with neutral PEGPEA and diacrylate crosslinker, poly (ethylene glycol) diacrylate (PEGDA) of two different chain lengths (n = 10 and 13) to prepare membranes of various compositions. Electrochemical and physicochemical properties including ionic conductivity, ion exchange capacity, and water uptake increase with increasing charged SPMAK content. Different states of water within hydrated membranes are probed using differential scanning calorimetry (DSC), where increasing intermediate (loosely bound) water is observed with increasing hydrophilic SPMAK content. The transport behavior of methanol and carboxylates (formate, acetate, propionate) are investigated, where permeabilities vary as methanol > formate > acetate ≈ propionate. Interestingly, permeabilities decrease with increasing PEGPEA content and are more dependent on solute diffusion than sorption. Permeabilities and diffusivities decrease while permselectivities increase with decreasing PEGDA chain length.

25 ENERGY STORAGE↗

Effects of phenol on barrier function of a human intestinal epithelial cell line correlate with altered tight junction protein localization

Phenol contamination of soil and water has raised concerns among people living near phenol-producing factories and hazardous waste sites containing the chemical. Phenol, particularly in high concentrations, is an irritating and corrosive substance, making mucosal membranes targets of toxicity in humans. However, few data on the effects of phenol after oral exposure exist. We used an in vitro model employing human intestinal epithelial cells (SK-CO15) cultured on permeable supports to examine effects of phenol on epithelial barrier function. We hypothesized that phenol disrupts epithelial barrier by altering tight junction (TJ) protein expression. The dose-response effect of phenol on epithelial barrier function was determined using transepithelial electrical resistance (TER) and FITC-dextran permeability measurements. We studied phenol-induced changes in cell morphology and expression of several tight junction proteins by immunofluorescence and Western blot analysis. Effects on cell viability were assessed by MTT, Trypan blue, propidium iodide and TUNEL staining. Exposure to phenol resulted in decreased TER and increased paracellular flux of FITC-dextran in a dose-dependent manner. Delocalization of claudin-1 and ZO-1 from TJs to cytosol correlated with the observed increase in permeability after phenol treatment. Additionally, the decrease in TER correlated with changes in the distribution of a membrane raft marker, suggesting phenol-mediated effects on membrane fluidity. Such observations were independent of effects of phenol on cell viability as enhanced permeability occurred at doses of phenol that did not cause cell death. Overall, these findings suggest that phenol may affect transiently the lipid bilayer of the cell membrane, thus destabilizing TJ-containing microdomains.

60 APPLIED LIFE SCIENCES↗

Isotopic Fingerprint of Uranium Accumulation and Redox Cycling in Floodplains of the Upper Colorado River Basin

Uranium (U) groundwater contamination is a major concern at numerous former mining and milling sites across the Upper Colorado River Basin (UCRB), USA, where U(IV)-bearing solids have accumulated within naturally reduced zones (NRZs). Understanding the processes governing U reduction and oxidation within NRZs is critical for assessing the persistence of U in groundwater. To evaluate the redox cycling of uranium, we measured the U concentrations and isotopic compositions (δ 238 U) of sediments and pore waters from four study sites across the UCRB that span a gradient in sediment texture and composition. We observe that U accumulation occurs primarily within fine-grained (low-permeability) NRZs that show active redox variations. Low-permeability NRZs display high accumulation and low export of U, with internal redox cycling of U. In contrast, within high-permeability NRZs, U is remobilized under oxidative conditions, possibly without any fractionation, and transported outside the NRZs. Finally, the low δ 238 U of sediments outside of defined NRZs suggests that these reduced zones act as additional U sources. Collectively, our results indicate that fine-grained NRZs have a greater potential to retain uranium, whereas NRZs with higher permeability may constitute a more-persistent but dilute U source.

54 ENVIRONMENTAL SCIENCES↗

Flow Reduction in Pore Networks of Packed Silica Nanoparticles: Insights from Mesoscopic Fluid Models

A modified many-body dissipative particle dynamics (mDPD) model is rigorously calibrated to achieve realistic fluid–fluid/solid interphase properties and applied for mesoscale flow simulations to elucidate the transport mechanisms of heptane liquid and water, respectively, through pore networks formed by packed silica nanoparticles with a uniform diameter of 30 nm. Two million CPU core hours were used to complete the simulation studies. Results show reduction of permeability by 54–64% in heptane flow and by 88–91% in water flow, respectively, compared to the Kozeny–Carman equation. In these nanopores, a large portion of the fluids are in the near-wall regions and thus not mobile due to the confinement effect, resulting in reduced hydraulic conductivity. Moreover, intense oscillations in the calculated flow velocities also indicate the confinement effect that contests the external driven force to flow. Here, the generic form of Darcy’s law is considered valid for flow through homogeneous nanopore networks, while permeability depends collectively on pore size and surface wettability. This fluid-permeability dependency is unique to flow in nanopores. In addition, potential dependence of permeability on pore connectivity is observed when the porosity remains the same in different core specimens.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diamine-Appended Mg 2 (dobpdc) Nanorods as Phase-Change Fillers in Mixed-Matrix Membranes for Efficient CO 2 /N 2 Separations

Despite the availability of chemistries to tailor the pore architectures of microporous polymer membranes for chemical separations, trade-offs in permeability and selectivity with functional group manipulations nevertheless persist, which ultimately places an upper bound on membrane performance. We introduce a new design strategy to uncouple these attributes of the membrane. Key to our success is the incorporation of phase-change metal-organic frameworks (MOFs) into the polymer matrix, which can be used to increase the solubility of a specific gas in the membrane, and thereby its permeability. We further show that it is necessary to scale the size of the phase-change MOF to nanoscopic dimensions, in order to take advantage of this effect in a gas separation. Our observation of an increase in solubility and permeability of only one of the gases during steady-state permeability measurements suggests fast exchange between free and chemisorbed gas molecules within the MOF pores. While the kinetics of this exchange in phase-change MOFs are not yet fully understood, their role in enhancing the efficacy and efficiency of the separation is clearly a compelling new direction for membrane technology.

36 MATERIALS SCIENCE↗

Molecular Properties That Define the Activities of Antibiotics in Escherichia coli and Pseudomonas aeruginosa

The permeability barrier of Gram-negative cell envelopes is the major obstacle in the discovery and development of new antibiotics. In Gram-negative bacteria, these difficulties are exacerbated by the synergistic interaction between two biochemically distinct phenomena, the low permeability of the outer membrane (OM) and active multidrug efflux. In this study, we used Pseudomonas aeruginosa and Escherichia coli strains with controllable permeability barriers, achieved through hyperporination of the OMs and varied efflux capacities, to evaluate the contributions of each of the barriers to protection from antibacterials. We analyzed antibacterial activities of β-lactams and fluoroquinolones, antibiotics that are optimized for targets in the periplasm and the cytoplasm, respectively, and performed a machine learning-based analysis to identify physicochemical descriptors that best classify their relative potencies. Our results show that the molecular properties selected by active efflux and the OM barriers are different for the two species. Antibiotic activity in P. aeruginosa was better classified by electrostatic and surface area properties, whereas topology, physical properties, and atom or bond counts best capture the behavior in E. coli . In several cases, descriptor values that correspond to active antibiotics also correspond to significant barrier effects, highlighting the synergy between the two barriers where optimizing for one barrier promotes strengthening of the other barrier. Furthermore, both barriers should be considered when optimizing antibiotics for favorable OM permeability, efflux evasion, or both.

59 BASIC BIOLOGICAL SCIENCES↗

Dynamic Evolution of Cement Composition and Transport Properties under Conditions Relevant to Geological Carbon Sequestration

Assessing the possibility of CO{sub 2} leakage is one of the major challenges for geological carbon sequestration. Injected CO{sub 2} can react with wellbore cement, which can potentially change cement composition and transport properties. In this work, we develop a reactive transport model based on experimental observations to understand and predict the property evolution of cement in direct contact with CO{sub 2}-saturated brine under diffusion-controlled conditions. The model reproduced the observed zones of portlandite depletion and calcite formation. Cement alteration is initially fast and slows down at later times. This work also quantified the role of initial cement properties, in particular the ratio of the initial portlandite content to porosity (defined here as φ), in determining the evolution of cement properties. Portlandite-rich cement with large φ values results in a localized “sharp” reactive diffusive front characterized by calcite precipitation, leading to significant porosity reduction, which eventually clogs the pore space and prevents further acid penetration. Severe degradation occurs at the cement–brine interface with large φ values. This alteration increases effective permeability by orders of magnitude for fluids that preferentially flow through the degraded zone. The significant porosity decrease in the calcite zone also leads to orders of magnitude decrease in effective permeability, where fluids flow through the low-permeability calcite zone. The developed reactive transport model provides a valuable tool to link cement–CO{sub 2} reactions with the evolution of porosity and permeability. It can be used to quantify and predict long-term wellbore cement behavior and can facilitate the risk assessment associated with geological CO{sub 2} sequestration.

54 ENVIRONMENTAL SCIENCES↗

Ideal CO2/Light Gas Separation Performance of Poly(vinylimidazolium) Membranes and Poly(vinylimidazolium)-Ionic Liquid Composite Films

Six vinyl-based, imidazolium room-temperature ionic liquid (RTIL) monomers were synthesized and photopolymerized to form dense poly(RTIL) membranes. The effect of polymer backbone (i.e., poly(ethylene), poly(styrene), and poly(acrylate)) and functional cationic substituent (e.g., alkyl, fluoroalkyl, oligo(ethylene glycol), and disiloxane) on ideal CO2/N-2 and CO2/CH4 membrane separation performance was investigated. The vinyl-based poly(RTIL)s were found to be generally less CO2-selective compared to analogous styrene- and acrylate-based poly(RTIL)s. The CO2 permeability of n-hexyl-(69 barrers) and disiloxane- (130 barrers) substituted vinyl-based poly(RTIL)s were found to be exceptionally larger than that of previously studied styrene and acrylate poly(RTIL)s. The CO2 selectivity of oligo(ethylene glycol)-functionalized vinyl poly(RTIL)s was enhanced, and the CO2 permeability was reduced when compared to the n-hexyl-substituted vinyl-based poly(RTIL). Nominal improvement in CO2/CH4 selectivity was observed upon fluorination of the n-hexyl vinyl-based poly(RTIL), with no observed change in CO2 permeability. However, rather dramatic improvements in both CO2 permeability and selectivity were observed upon blending 20 mol % RTIL (emim Tf2N) into the n-hexyl- and disiloxane-functionalized vinyl poly(RTIL)s to form solid liquid composite films.

Carlisle, TK↗