Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pattern dependence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Heterogeneous nature of relaxation dynamics of room-temperature ionic liquids (EMIm) 2 [Co(NCS) 4 ] and (BMIm) 2 [Co(NCS) 4 ]

Dynamic crossover above T g has been recognized as a characteristic feature of molecular dynamics of liquids approaching glass transition. Experimentally, it is manifested as a change in Vogel Fulcher Tammann dependence or a breakdown of the Stokes Einstein and related relations. In this paper, we report the exception from this rather general pattern of behavior. By means of dielectric, ultrasonic, rheological, and calorimetric methods, dynamics of two good ionic conductors (BMIm) 2 [Co(NCS) 4 ] and (EMIm) 2 [Co(NCS) 4 ] of less common stoichiometry (2:1) was studied in a very broad temperature range. However, none of the mentioned dynamic changes was observed in the entire studied temperature range. On the contrary, the single VFT and the same fractional Walden coefficient were found for conductivity and viscosity changes over 12 decades. Furthermore, ultrasonic studies revealed that the data at temperatures which cover the normal liquid region cannot be fitted by a single exponential decay, and the Cole Cole function should be used instead.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Inferring ultraviolet anatomical exposure patterns while distinguishing the relative contribution of radiation components

Exposure to solar ultraviolet (UV) radiation is the main causative factor for skin cancer. UV exposure depends on environmental and individual factors, but individual exposure data remain scarce. While ground UV irradiance is monitored via different techniques, it is difficult to translate such observations into human UV exposure or dose because of confounding factors. A multi-disciplinary collaboration developed a model predicting the dose and distribution of UV exposure on the basis of ground irradiation and morphological data. Standard 3D computer graphics techniques were adapted to develop a simulation tool that estimates solar exposure of a virtual manikin depicted as a triangle mesh surface. The amount of solar energy received by various body locations is computed for direct, diffuse and reflected radiation separately. Dosimetric measurements obtained in field conditions were used to assess the model performance. The model predicted exposure to solar UV adequately with a symmetric mean absolute percentage error of 13% and half of the predictions within 17% range of the measurements. Using this tool, solar UV exposure patterns were investigated with respect to the relative contribution of the direct, diffuse and reflected radiation. Exposure doses for various body parts and exposure scenarios of a standing individual were assessed using erythemally-weighted UV ground irradiance data measured in 2009 at Payerne, Switzerland as input. For most anatomical sites, mean daily doses were high (typically 6.2-14.6 Standard Erythemal Dose, SED) and exceeded recommended exposure values. Direct exposure was important during specific periods (e.g. midday during summer), but contributed moderately to the annual dose, ranging from 15 to 24% for vertical and horizontal body parts, respectively. Diffuse irradiation explained about 80% of the cumulative annual exposure dose.

61 RADIATION PROTECTION AND DOSIMETRY↗

Regional Variations in the Diurnal Cycle of Tropical Precipitation as Represented by IMERG, ERA5, and Spaceborne Ku Radar

The diurnal cycle of precipitation is highly regional and is typically a product of multiple competing effects that can be highly localized. The diurnal cycle in high precipitation regions such as the Amazon and the Maritime Continent are of particular interest, especially due to the complex coastal effects which take place over the Maritime Continent. The high spatial and temporal resolution provided by the Integrated Multi-satellitE Retrievals for Global Precipitation Measurement (GPM) mission (IMERG) dataset, is used in this study to examine the fine-scale features of the diurnal cycle in these regions. Using an 18-year (2000 – 2018) record of IMERG precipitation observations, diurnal and semidiurnal phase and amplitude are calculated using a fast Fourier transform (FFT) method on precipitation averaged for each half-hour of the day at 0.1°x0.1° spatial resolution. We first introduce an objective method of identifying locations where the diurnal signals are robust and strong. Clear patterns of precipitation phase propagation with distance from shore are shown over both regions, with the diurnal phase and amplitude exhibiting a strong dependence on the distance from the coastline. Semidiurnal cycles are generally weaker than the diurnal cycle except in some isolated locations. Similar analysis is also conducted on the ERA5 reanalysis data in order to evaluate the model’s representation of the precipitation diurnal cycle. The model captures the broad scale patterns of diurnal variability but does not capture all the fine scale patterns nor the exact timing that is observed by IMERG. Comparisons are also made to a long record Ku radar dataset created by combining Tropical Rainfall Measuring Mission (TRMM) and GPM observations, thus providing an additional point of comparison for the timing of the ERA5 precipitation peak, since the timing precipitation can be different, even in between observational datasets.

L J Hayden↗

Temperature dependence of the photoluminescence polarization of ordered III-V semiconductor alloys

We studied the linear polarization of the photoluminescence (PL) emission of atomically ordered GaInAsP and GaInP alloys with different ordering parameters in the temperature range from 10 to 300 K. The epitaxial layers of these alloys were grown on GaAs and Ge (001) substrates by metal organic vapor phase epitaxy. The polarization of the PL emission propagating along different crystallographic axes depends on the value of biaxial strain in the layer and changes with temperature. We calculated the PL polarization patterns for different propagation directions as a function of biaxial strain using an existing model developed for ternary atomically ordered III-V alloys. Comparing the calculated PL polarization patterns with those obtained experimentally, we separated the variation of the PL polarization due to change of biaxial strain with temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Excitation Energy Dependence in Near-infrared Photoluminescence Spectra and Dynamics of PuO{sub 2}{sup 2+} in Cs{sub 2}U(Pu)O{sub 2}Cl{sub 4}

Recently we reported the observation of near-infrared photoluminescence from metal-centered 5f electronic excited states of PuO{sub 2}{sup 2+} doped into polycrystalline Cs{sub 2}U(Pu)O{sub 2}Cl{sub 4}. Photoluminescence dynamics following pulsed excitation show complicated decay patterns suggesting that multiple luminescent states are involved. Here we report the results of two recent sets of experiments showing that photoluminescence processes depend significantly on the energy of photoexcitation. In the first case, decay kinetics following excitation at a lower energy are missing an in-growth term that is present when exciting at higher energy. In the second case, we have observed that lower excitation energy produces significantly reduced number of emission transitions than higher excitation energy. Both observations suggest that higher energy excitation populates feeder states that decay to emitting states, causing signal from the latter to have an in-growth followed by a decay characteristic of their intrinsic lifetimes, whereas lower energy excitation leads to more direct population of luminescent states. (authors)

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Impurity screening behavior of the high-field side scrape-off layer in near-double-null configurations: prospect for mitigating plasma-material interactions on RF actuators and first-wall components

The impurity screening response of the high-field side (HFS) scrape-off layer (SOL) to localized nitrogen injection is investigated on Alcator C-Mod for magnetic equilibria spanning lower-single null, double-null and upper single null configurations under otherwise identical plasma conditions. L-mode, EDA H-mode and I-mode discharges are investigated. HFS impurity screening is found to depend on magnetic flux balance and the direction of B×?B relative to the most active divertor. Impurity ‘plume’ emission patterns indicate that both parallel and perpendicular (E×B) flows in the SOL contribute to the ‘flushing’ of impurities towards the active divertor, thereby affecting the overall impurity screening behavior. Despite the fact that the HFS scrape-off layer is extremely narrow in near-double-null configurations, this SOL is able to screen locally injected nitrogen at least as effectively as the low-field side (LFS) SOL – up to a factor of 10 more effective, depending on specific plasma conditions and whether the magnetic geometry produces parallel flows that work with or against E×B flows. For situations in which the E×B drift of the impurity ions opposes parallel flow toward the primary divertor, HFS impurity screening is found to be least effective. When E×B drifts assist parallel flow toward the primary divertor, HFS impurity screening is found to be very effective. These data support the idea of placing RF actuators and close-fitting wall components on the high-field side of the tokamak. With this configuration, near-double-null magnetic topologies may be used for active control of plasma parameters at the antenna/plasma interface for optimal RF coupling, mitigate the generation of local impurities from plasma-material interactions and, taking advantage of favorable plasma flows and good screening properties of the HFS SOL, further minimize the impact of wall-born impurity sources on the plasma core.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

STRONG DEPENDENCE OF THE INNER EDGE OF THE HABITABLE ZONE ON PLANETARY ROTATION RATE

Planetary rotation rate is a key parameter in determining atmospheric circulation and hence the spatial pattern of clouds. Since clouds can exert a dominant control on planetary radiation balance, rotation rate could be critical for determining the mean planetary climate. Here we investigate this idea using a three-dimensional general circulation model with a sophisticated cloud scheme. We find that slowly rotating planets (like Venus) can maintain an Earth-like climate at nearly twice the stellar flux as rapidly rotating planets (like Earth). This suggests that many exoplanets previously believed to be too hot may actually be habitable, depending on their rotation rate. The explanation for this behavior is that slowly rotating planets have a weak Coriolis force and long daytime illumination, which promotes strong convergence and convection in the substellar region. This produces a large area of optically thick clouds, which greatly increases the planetary albedo. In contrast, on rapidly rotating planets a much narrower belt of clouds form in the deep tropics, leading to a relatively low albedo. A particularly striking example of the importance of rotation rate suggested by our simulations is that a planet with modern Earth's atmosphere, in Venus' orbit, and with modern Venus' (slow) rotation rate would be habitable. This would imply that if Venus went through a runaway greenhouse, it had a higher rotation rate at that time.

79 ASTRONOMY AND ASTROPHYSICS↗

High Throughput Data-Driven Design of Laser-Crystallized 2D MoS 2 Chemical Sensors: A Demonstration for NO 2 Detection

High throughput characterization and processing techniques are becoming increasingly necessary to navigate multivariable, data-driven design challenges for sensors and electronic devices. For two-dimensional materials, device performance is highly dependent upon a vast array of material properties including the number of layers, lattice strain, carrier concentration, defect density, and grain structure. In this work, laser crystallization was used to locally pattern and transform hundreds of regions of amorphous MoS 2 thin films into 2D 2H-MoS 2 . Here a high throughput Raman spectroscopy approach was subsequently used to assess the process-dependent structural and compositional variations for each illuminated region, yielding over 6000 distinct nonresonant, resonant, and polarized Raman spectra. The rapid generation of a comprehensive library of structural and compositional data elucidated important trends between structure–property processing relationships involving laser-crystallized MoS 2 , including the relationships between grain size, grain orientation, and intrinsic strain. Moreover, extensive analysis of structure/property relationships allowed for intelligent design and evaluation of major contributions to device performance in MoS 2 chemical sensors. In particular, it is found that NO 2 sensor performance is strongly dependent on the orientation of the MoS 2 grains relative to the crystal plane.

36 MATERIALS SCIENCE↗

Dependence of selectivity on plasma conditions in selective etching in submicrometer pitch grating on InP surface by CH{sub 4}/H{sub 2} reactive ion etching

We studied selective etching and polymer deposition in submicrometer pitch gratings on the surface of InP using reactive ion etching with methane and hydrogen and investigated the plasma condition dependence of the selectivity. Using a mask structure consisting of regions with and without a thick layer on a grating-patterned thin layer, we achieved selective etching in submicrometer pitch gratings. In experiments conducted on the same surface at the same time, the InP is selectively etched in the window of the grating in the region with the thick layer, but it is not etched, and polymer is deposited, in the window of the grating in the region without the thick layer. We found that the selectivity depends on the plasma conditions, such as the hydrogen flow rate, pressure, and plasma power in reactive ion etching. This dependence might result from the variation in the ionic atoms of hydrogen or hydrocarbon/hydrogen, which are attracted to the charged mask and supplied to the window of the grating.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Control of Domain Structures in Multiferroic Thin Films through Defect Engineering

Domain walls (DWs) have become an essential component in nanodevices based on ferroic thin films. The domain configuration and DW stability, however, are strongly dependent on the boundary conditions of thin films, which make it difficult to create complex ordered patterns of DWs. Here, it is shown that novel domain structures, that are otherwise unfavorable under the natural boundary conditions, can be realized by utilizing engineered nanosized structural defects as building blocks for reconfiguring DW patterns. It is directly observed that an array of charged defects, which are located within a monolayer thickness, can be intentionally introduced by slightly changing substrate temperature during the growth of multiferroic BiFeO 3 thin films. These defects are strongly coupled to the domain structures in the pretemperature-change portion of the BiFeO 3 film and can effectively change the configuration of newly grown domains due to the interaction between the polarization and the defects. Thus, two types of domain patterns are integrated into a single film without breaking the DW periodicity. The potential use of these defects for building complex patterns of conductive DWs is also demonstrated.

36 MATERIALS SCIENCE↗

Widespread co‐occurrence of Sebacinales and arbuscular mycorrhizal fungi in switchgrass roots and soils has limited dependence on soil carbon or nutrients

Societal Impact Statement This work addresses a novel group of Sebacinales mycorrhizal fungi being considered for development as inoculants in managed ecosystems because of their potential access to nutrients in soil organic matter. By comparing the diversity, distributions, and abundances of the Sebacinales with the more common arbuscular mycorrhizal fungi in switchgrass, a biofuel crop, we demonstrate that current suggestions for a Sebacinales revolution in agriculture should be tempered by their ecology. In particular, Sebacinales are rare compared to arbuscular mycorrhizal fungi, and are only weakly associated with soil carbon, suggesting that ideas about improved soil carbon cycling associated with Sebacinales need to be sufficiently studied across a range of environmental conditions prior to their consideration for broad‐spectrum soil inoculants. Summary Arbuscular mycorrhizal (AM) fungi are widespread and important root symbionts, but recent work suggests that Sebacinales fungi may play an equally important role in both plant success and ecosystem carbon and nutrient cycling based on their worldwide occurrence and putative access to organic matter. However, the ecological impacts of Sebacinales will depend on their abundance and distribution relative to AM fungi and environmental soil carbon and nutrient patterns, which remain unexplored. We characterized Glomeromycota and Sebacinales fungi in switchgrass ( Panicum virgatum L.) roots and soils across 14 sites with diverse soil conditions. We examined group richness differences, co‐occurrence patterns, and how the relative abundance of these fungi related to soil carbon, nutrient stoichiometry, and host size. Sebacinales were widespread, but less diverse, common, and abundant than Glomeromycota. Moreover, co‐occurrences were predominantly random, suggesting relatively few interactions between these groups. Sebacinales increased relative to Glomeromycota in soils with more carbon, but explanatory power was limited. Based on our findings, we suggest that Sebacinales are likely complementary to AM fungi in roots. Expectations that Sebacinales have large effects on soil carbon and nutrient cycling may need to be reconsidered, at least based on their limited abundances relative to AM fungi in switchgrass. This is an important consideration as Sebacinales are candidates for use as inoculants in managed ecosystems.

Lee, Marissa R.↗

Weyl type spin–orbit coupled ferromagnetic Bose–Einstein condensates under rotation

Highlights: Spinor Bose–Einstein condensates with Weyl type spin–orbit coupling and rotation are considered. Different topological patterns are obtained in the full parameter space. Effects of spin-independent and spin-dependent interactions on the ground state are also discussed. -- Abstract: We investigate the ground state of ferromagnetic Bose–Einstein condensates with Weyl type spin–orbit coupling and rotation. When the spin–orbit coupling is strong, the ground state of the system exhibits square lattice phase for the non-rotation case, while two half-skyrmion chains can occur, which is perpendicular to each other, for the rotation case. For the weak spin–orbit coupling case, half-skyrmion displays the symmetrical arrangement around Mermin–Ho vortex at the center of condensates as the rotation frequency is increased. Moreover, the effects of spin-independent and spin-dependent interactions on the ground state are also studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A comparison of dilatometry and in-situ neutron diffraction in tracking bulk phase transformations in a martensitic stainless steel

Phase transformations in the 17-4PH martensitic stainless steel have been studied using different in-situ techniques, including dilatometry and high resolution neutron diffraction. Neutron diffraction patterns were quantitatively processed using the Rietveld refinement method, allowing the determination of the temperature-dependence of martensite (α′, bcc) and austenite (γ, fcc) phase fractions and lattice parameters on heating to 1000 °C and then cooling to room temperature. It is demonstrated in this work that dilatometry doesn't permit an accurate determination of the end temperature (Ac3) of the α′ → γ transformation which occurs upon heating to high temperature. The analysis of neutron diffraction data has shown that the respective volumes of the two phases become very close to each other at high temperature, thus making the dilatometric technique almost insensitive in that temperature range. However, there is a very good agreement between neutron diffraction and dilatometry at lower temperature. The martensitic transformation occurring upon cooling has been analysed using the Koistinen–Marburger equation. The thermal expansion coefficients of the two phases have been determined in addition. A comparison of the results obtained in this work with data from literature is presented. - Highlights: • Martensite is still present at very high temperature (> 930 °C) upon heating. • The end of austenitisation cannot be accurately monitored by dilatometry. • The martensite and austenite volumes become similar at high temperature (> ∼ 850 °C)

36 MATERIALS SCIENCE↗

V-ATPase as an effective therapeutic target for sarcomas

Malignant tumors show intense glycolysis and, as a consequence, high lactate production and proton efflux activity. We investigated proton dynamics in osteosarcoma, rhabdomyosarcoma, and chondrosarcoma, and evaluated the effects of esomeprazole as a therapeutic agent interfering with tumor acidic microenvironment. All sarcomas were able to survive in an acidic microenvironment (up to 5.9–6.0 pH) and abundant acidic lysosomes were found in all sarcoma subtypes. V-ATPase, a proton pump that acidifies intracellular compartments and transports protons across the plasma membrane, was detected in all cell types with a histotype-specific expression pattern. Esomeprazole administration interfered with proton compartmentalization in acidic organelles and induced a significant dose-dependent toxicity. Among the different histotypes, rhabdomyosarcoma, expressing the highest levels of V-ATPase and whose lysosomes are most acidic, was mostly susceptible to ESOM treatment. - Highlights: • Osteosarcoma, rhabdomyosarcoma, and chondrosarcoma survive in acidic microenvironment. • At acidic extracellular pH, sarcoma survival is dependent on V-ATPase expression. • Esomeprazole administration induce a significant dose-dependent toxicity.

60 APPLIED LIFE SCIENCES↗

Immunophenotypic characterization and therapeutics effects of human bone marrow- and umbilical cord-derived mesenchymal stromal cells in an experimental model of sepsis

Highlights: • Mesenchymal stromal cells (MSCs) may be a therapeutic option for sepsis. • Bone marrow (BM) vs. umbilical cord (UC) -MSCs induce different M1/M2 gene profiles. • In a CLP model of sepsis, only BM-MSCs improved survival and bacterial clearance. Sepsis is a complicated multi-system disorder characterized by a dysregulated host response to infection. Despite substantial progress in the understanding of mechanisms of sepsis, translation of these advances into clinically effective therapies remains challenging. Mesenchymal Stromal Cells (MSCs) possess immunomodulatory properties that have shown therapeutic promise in preclinical models of sepsis. The therapeutic effects of MSCs may vary depending on the source and type of these cells. In this comparative study, the gene expression pattern and surface markers of bone marrow-derived MSCs (BM-MSCs) and umbilical cord-derived MSCs (UC-MSCs) as well as their therapeutic effects in a clinically relevant mouse model of polymicrobial sepsis, cecal ligation and puncture (CLP), were investigated. The results showed remarkable differences in gene expression profile, surface markers and therapeutic potency in terms of enhancing survival and pro/anti-inflammatory responses between the two MSC types. BM-MSCs improved survival concomitant with an enhanced systemic bacterial clearance and improved inflammatory profile post CLP surgery. Despite some improvement in the inflammatory profile of the septic animals, treatment with UC-MSCs did not enhance survival or bacterial clearance. Overall, the beneficial therapeutic effects of BM-MSCs over UC-MSCs may likely be attributed to their pro-inflammatory function, and to some extent anti-inflammatory features, reflected in their gene expression pattern enhancing macrophage polarization to M1/M2 phenotypes resulting in a balanced pro- and anti-inflammatory response against polymicrobial sepsis.

60 APPLIED LIFE SCIENCES↗

Planar Defect Layers Template a High-Pressure InBi Polymorph

The short- and long-range order of III–V materials under high pressure has long been the subject of debate, with advancements in structural characterization leading to significant revisions to the accepted structural models. Despite these revisions, previous high-pressure structural assignments in the In–Bi system include the site-disordered β-Sn structure type, a structure type demonstrated to be nonexistent in analogous III–V systems. While X-ray diffraction is consistent with site disordering in InBi at high pressure, cluster expansion calculations indicate that disordering requires temperatures above 3000 K. Here, we propose InBi as a model material for studying unique high-pressure planar defects due to its highly anisotropic stress-dependent properties and structure. Specifically, we identify two sets of planar defects that mimic the diffraction pattern of a site disordered β-Sn structure type and are compatible with the calculated disorder barrier. We derive these defects by symmetry relations over crystallographic transitions. Density functional theory calculations of the proposed defects suggest that these defects are stabilized by diminishing interlayer separations with pressure. Further, we find that one of the proposed defects closely resembles a bulk high-pressure phase of InBi, InBi-ϵ, and we assert that the proposed defects order upon heating, acting as a template for InBi-ϵ growth. The proposed defects and their electronic structure provide a basis for the trend of superconducting critical temperature with increasing pressure. These methods for identifying defects are generalizable to other materials with reports of site disorder at high pressure, prompting a broader search for related high-pressure defects.

36 MATERIALS SCIENCE↗

Modification of Defect Structures in Graphene by Electron Irradiation: Ab Initio Molecular Dynamics Simulations

Defects play an important role on the unique properties of the sp2-bonded materials, such as graphene. The creation and evolution of mono-vacancy, di-vacancy, Stone-Wales (SW) and grain boundaries (GBs) under irradiation in graphene are investigated using density functional theory and time-dependent density functional theory molecular dynamics simulations. It is of great interest to note that the patterns of these defects can be controlled through electron irradiation. The SW defects can be created by electron irradiation with energy of above the displacement threshold energy (Td, {approx}19 eV) and can be healed with an energy (14-18 eV) lower than Td. The transformation between four types of divacancies, V2(5-8-5), V2(555-777), V2(5555-6-7777), and V2(55-77) can be realized through bond rotation induced by electron irradiation. The migrations of divancancies, SW defects, and GBs can also be controlled by electron irradiation. Thus, electron irradiation can serve as an important tool to modify morphology in a controllable manner, and to tailor the physical properties of graphene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗