Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “passivating layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

MSFC Analysis of Thermal Control Materials on MISSE

Many different passive thermal control materials were flown as part of the Materials on International Space Station Experiment, including coatings, anodizes, and multi-layer insulation materials. Engineers and scientists at the Marshall Space Flight Center have analyzed a number of these materials, including: Zinc oxide/potassium silicate coating, Zinc orthotitanate/potassium silicate coating, Sulfuric acid anodized aluminum, Various coatings for part marking, automated rendezvous and capture, and astronaut visual aids, FEP Teflon with silver/Inconel backing, and Beta cloth with and without aluminization. These and other material samples were exposed to the low Earth orbital environment of atomic oxygen, ultraviolet radiation, thermal cycling, and hard vacuum, though atomic oxygen exposure was very limited for some samples. Solar absorptance, infrared emittance, and mass measurements indicate the durability of these materials to withstand the space environment. The effect of contamination from an active space station on the performance of white thermal control coatings is discussed.

Finckenor, Miria↗

Final Closure of the Maxey Flats Low-Level Radioactive Waste Disposal Site - 16088

This paper describes the final closure remedy for the former Maxey Flats Low-Level Radioactive Waste Disposal Site (MFDS), the challenges presented at the site due to the condition of the disposal facility and waste, and their resolution through comprehensive geo-synthetic design. The MFDS is an inactive landfill located in Kentucky on a ridge surrounded by a buffer zone. Historically, waste disposal occurred without reducing voids or without compacting the placed waste. Settlement and water management issues led to releases of radioactive contamination into surrounding waters, resulting in the closure of the facility in 1977. The final closure remedy consists of 1) development and implementation oversight of a sump abandonment design to ensure no direct pathways for infiltrating water to contact the waste and 2) development and implementation oversight of the Final Closure Period (FCP) cap design. Challenges successfully addressed by the FCP scope included: Abandon sumps to minimize storm water migrating into the waste; Address potential existing groundwater waste interaction; Maximum use of on-site cap construction materials; Design cap to fit very restricted site footprint; Assess and address potential isolated differential settlement; Maximize passive storm water management; Provide alternative site access during construction. The FCP remedy and resultant design satisfies these challenges through use of layers of geo-grid-reinforced soil and geo-synthetic materials, contours and slopes that minimize the quantities of construction materials while maximizing the use of available material, probabilistic subsidence modeling, an integrated storm water management system ensuring the slow release of storm water into receiving streams, and a dedicated construction haul road system. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Engineered Multifunctional Surfaces for Fluid Handling

Designs incorporating variations in capillary geometry and hydrophilic and/or antibacterial surface properties have been developed that are capable of passive gas/liquid separation and passive water flow. These designs can incorporate capillary grooves and/or surfaces arranged to create linear and circumferential capillary geometry at the micro and macro scale, radial fin configurations, micro holes and patterns, and combinations of the above. The antibacterial property of this design inhibits the growth of bacteria or the development of biofilm. The hydrophilic property reduces the water contact angle with a treated substrate such that water spreads into a thin layer atop the treated surface. These antibacterial and hydrophilic properties applied to a thermally conductive surface, combined with capillary geometry, create a novel heat exchanger capable of condensing water from a humid, two-phase water and gas flow onto the treated heat exchanger surfaces, and passively separating the condensed water from the gas flow in a reduced gravity application. The overall process to generate the antibacterial and hydrophilic properties includes multiple steps to generate the two different surface properties, and can be divided into two major steps. Step 1 uses a magnetron-based sputtering technique to implant the silver atoms into the base material. A layer of silver is built up on top of the base material. Completion of this step provides the antibacterial property. Step 2 uses a cold-plasma technique to generate the hydrophilic surface property on top of the silver layer generated in Step 1. Completion of this step provides the hydrophilic property in addition to the antibacterial property. Thermally conductive materials are fabricated and then treated to create the antibacterial and hydrophilic surface properties. The individual parts are assembled to create a condensing heat exchanger with antibacterial and hydrophilic surface properties and capillary geometry, which is capable of passive phase separation in a reduced gravity application. The plasma processes for creating antibacterial and hydrophilic surface properties are suitable for applications where water is present on an exposed surface for an extended time, such that bacteria or biofilms could form, and where there is a need to manage the water on the surface. The processes are also suitable for applications where only the hydrophilic property is needed. In particular, the processes are applicable to condensing heat exchangers (CHXs), which benefit from the antibacterial properties as well as the hydrophilic properties. Water condensing onto the control surfaces of the CHX will provide the moist conditions necessary for the growth of bacteria and the formation of biofilms. The antibacterial properties of the base layer (silver) will mitigate and prevent the growth of bacteria and formation of biofilms that would otherwise reduce the CHX performance. In addition, the hydrophilic properties reduce the water contact angle and prevent water droplets from bridging between control surfaces. Overall, the hydrophilic properties reduce the pressure drop across the CHX.

Thomas, Chris↗

Scalable method of fabricating structured polymers for passive daytime radiative cooling and other applications

A switchable light transmission module is disclosed that includes a substrate having a first surface defining at least part of an enclosed volume, a porous layer disposed on the first surface and in fluid communication with the enclosed volume, and a reservoir in fluid communication with the enclosed volume. The reservoir is configured to supply a fluid to the sealed volume such that the fluid contacts the porous layer. The fluid has a refractive index that is close to the refractive index of the porous layer, has a high wettability for the porous layer, and does not dissolve the porous layer. When in a dry state, voids in the porous layer are filled with air which has a much different refractive index than the porous layer itself, resulting in a surface that is reflective and not very transmissive. During wetting of the porous layer by the fluid, however, those voids are filled with the fluid, reducing the difference in refractive index across the polymer-fluid interfaces such that light scattering is negligible and the surface becomes light permeable.

Mandal, Jyotirmoy↗

Band alignment of HfO{sub 2}/Al{sub 0.25}Ga{sub 0.75}N determined by x-ray photoelectron spectroscopy: Effect of SiH{sub 4} surface treatment

The band-alignment of atomic layer deposited (ALD)-HfO{sub 2}/Al{sub 0.25}Ga{sub 0.75}N was studied by high resolution x-ray photoelectron spectroscopy measurements for both the non-passivated and SiH{sub 4} passivated AlGaN surfaces. The valence band offset and the conduction band offset for the ALD-HfO{sub 2}/Al{sub 0.25}Ga{sub 0.75}N interface were found to be 0.43 eV and 1.47 eV, respectively, for the non-passivated sample, and 0.59 eV and 1.31 eV, respectively, for the SiH{sub 4}-passivated sample. The difference in the band alignment is dominated by the band bending or band shift in the AlGaN substrate as a result of the different interlayers formed by the two surface preparations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-temperature oxidation behavior of the SiC layer of TRISO particles in low-pressure oxygen

Surrogate tristructural-isotropic (TRISO)-coated fuel particles were oxidized in 0.2 kPa O 2 at 1200–1600°C to examine the behavior of the SiC layer and understand the mechanisms. The thickness and microstructure of the resultant SiO 2 layers were analyzed using scanning electron microscopy, focused ion beam, and transmission electron microscopy. The majority of the surface comprised smooth, amorphous SiO 2 with a constant thickness indicative of passive oxidation. The apparent activation energy for oxide growth was 188 ± 8 kJ/mol and consistent across all temperatures in 0.2 kPa O 2 . The relationship between activation energy and oxidation mechanism is discussed. Raised nodules of porous, crystalline SiO 2 were dispersed across the surface, suggesting that active oxidation and redeposition occurred in those locations. These nodules were correlated with clusters of nanocrystalline SiC grains, which may facilitate active oxidation. So these findings suggest that microstructural inhomogeneities such as irregular grain size influence the oxidation response of the SiC layer of TRISO particles and may influence their accident tolerance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Transmission Electron Microscopy (TEM) Study of the Oxide Layers Formed on Fe-12Cr-4Al Ferritic Alloy in an Oxygenated Pb-Bi Environment at 800°C

Liquid lead–bismuth eutectic (LBE) can serve as a heat transfer fluid for advanced nuclear applications as well as concentrated solar power but poses corrosion challenges for the structural materials at elevated temperatures. Oxide passivation of the surfaces of these materials during exposure to liquid LBE can inhibit such material degradation. In this study, transmission electron microscopy of oxides formed on Fe-Cr-Al alloy during exposure to lowoxygenated LBE at 800C has been performed. A complex structure of the oxide film has been revealed, consisting of a homogeneous inner layer of mostly Al 2 O 3 and a heterogeneous outer layer.

14 SOLAR ENERGY↗

Thermal Control Replacement Materials Evaluated for Durability and Selected for the Hubble Space Telescope

During the Hubble Space Telescope (HST) second servicing mission, astronauts noticed that the outer layer of the multilayer insulation (MLI) was cracked in many locations around the telescope. The insulation s outer layer is composed of 5-mil (0.127 mm) Teflon FEP (DuPont; fluorinated ethylene propylene) with vapor-deposited aluminum (VDA) on the backside. The MLI blankets, which are used on over 80 percent of the external surface of the telescope, provide passive thermal control for equipment. Two large cracks were observed on the light shield directly above the high gain antenna. The upper light shield crack propagated from a cut placed in the blanket during installation around a handrail standoff. Two cracks propagated almost normal to each other, with the outer layer curling tightly as the cracks propagated. A second much larger vertical crack had started to curl and lift away from the telescope, as seen in the figure. MLI on the equipment bays was cracked extensively also, and in some areas it had pulled away from the bay. Continued degradation of the equipment bay insulation would potentially cause limited observations because of housekeeping boxes; for example, the data interface unit could overheat during some portions of the year, in certain sun angles.

deGroh, Kim K.↗

Front/Back Poly-Si/SiO2 Passivated Contact Device with Voc > 720 mV

We report on front/back poly-Si/SiO2 passivated contact solar cells with iVoc > 735 mV and Voc > 720 mV. The devices were grown on n-Cz wafers using PECVD to deposit doped a-Si layers which were then annealed at 850 degrees C. Our best device has an efficiency of 21% which is limited by: (1) low current density from a large grid shadow loss and parasitic absorption in the front poly-Si:P layer; and (2) high series resistance from a high Al-poly-Si:P contact resistivity. We discuss the role of high temperature anneals throughout the process flow to preserve and improve the bulk lifetime of the n-Cz wafers.

14 SOLAR ENERGY↗

An experimentally supported model for the origin of charge transport barrier in Zn(O,S)/CIGSSe solar cells

Zinc oxysulfide buffer layers with [O]:[S] of 1:0, 6:1, 4:1, 2:1, and 1:1 ratios were deposited by atomic layer deposition on Cu(In,Ga)(S,Se){sub 2} absorbers and made into finished solar cells. We demonstrate using Time-Resolved Photoluminescence that the minority carrier lifetime of Zn(O,S) buffered solar cells is dependent on the sulfur content of the buffer layer. τ{sub 1} for devices with [O]:[S] of 1:0–4:1 are <10 ns, indicating efficient charge separation in devices with low sulfur content. An additional τ{sub 2} is observed for relaxed devices with [O]:[S] of 2:1 and both relaxed and light soaked devices with [O]:[S] of 1:1. Corroborated with one-dimensional electronic band structure simulation results, we attribute this additional decay lifetime to radiative recombination in the absorber due to excessive acceptor-type defects in sulfur-rich Zn(O,S) buffer layer that causes a buildup in interface-barrier for charge transport. A light soaking step shortens the carrier lifetime for the moderately sulfur-rich 2:1 device when excess acceptors are passivated in the buffer, reducing the crossover in the dark and illuminated I-V curves. However, when a high concentration of excess acceptors exist in the buffer and cannot be passivated by light soaking, as with the sulfur-rich 1:1 device, then cell efficiency of the device will remain low.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Visualizing Oxidation Mechanisms in Few-Layered Black Phosphorus via In Situ Transmission Electron Microscopy

Layered two-dimensional (2D) black phosphorus (BP) exhibits novel semiconducting properties including a tunable bandgap and high electron mobility. However, the poor stability of BP in ambient environment severely limits potential for application in future electronic and optoelectronic devices. While passivation or encapsulation of BP using inert materials/polymers has emerged as a plausible solution, a detailed fundamental understanding of BP's reaction with oxygen is imperative to rationally advance its use in applications. Here, we use in situ environmental transmission electron microscopy to elucidate atomistic structural changes in mechanically exfoliated few-layered BP during exposure to varying partial pressures of oxygen. An amorphous oxide layer is seen on the actively etching BP edges, and the thickness of this layer increases with increasing oxygen partial pressure, indicating that oxidation proceeds via initial formation of amorphous P x O y species which sublime to result in the etching of the BP crystal. We observe that while few-layered BP is stable under the 80 kV electron beam (e-beam) in vacuum, the lattice oxidizes and degrades at room temperature in the presence of oxygen only in the region under the e-beam. The oxidative etch rate also increases with increasing e-beam dosage, suggesting the presence of an energy barrier for the oxidation reaction. Preferential oxidative etching along the [0 0 1] and [0 0 1] crystallographic directions is observed, in good agreement with density functional theory calculations showing favorable thermodynamic stability of the oxidized BP (0 0 $\bar{1}$) planes compared to the (1 0 0) planes. Finally, we expect the atomistic insights and fundamental understanding obtained here to aid in the development of novel approaches to integrate BP in future applications.

2D materials↗

Stabilization of Si microwire arrays for solar-driven H 2 O oxidation to O 2 (g) in 1.0 M KOH(aq) using conformal coatings of amorphous TiO 2

In this work, conductive, amorphous TiO 2 coatings deposited by atomic-layer deposition, in combination with a sputter deposited NiCrO x oxygen-evolution catalyst, have been used to protect Si microwire arrays from passivation or corrosion in contact with aqueous electrolytes. Coated np + -Si/TiO 2 /NiCrO x as well as heterojunction n-Si/TiO 2 /NiCrO x Si microwire-array photoanodes exhibited stable photoelectrochemical operation in aqueous ferri-/ferro-cyanide solutions. The coatings also allowed for photoanodic water oxidation in 1.0 M KOH(aq) solutions for >2200 h of continuous operation under simulated 1 Sun conditions with ~100% Faradaic efficiency for the evolution of O 2 (g).

Shaner, Matthew R.↗

Experimental characterization and modeling of non-linear coupling of the LHCD power on Tore Supra

To achieve steady state operation on future tokamaks, in particular on ITER, the unique capability of a LHCD system to efficiently drive off-axis non-inductive current is needed. In this context, it is of prime importance to study and master the coupling of LH wave to the core plasma at high power density (tens of MW/m{sup 2}). In some specific conditions, deleterious effects on the LHCD coupling are sometimes observed on Tore Supra. At high power the waves may modify the edge parameters that change the wave coupling properties in a non-linear manner. In this way, dedicated LHCD experiments have been performed using the LHCD system of Tore Supra, composed of two different conceptual designs of launcher: the Fully Active Multijunction (FAM) and the new Passive Active Multijunction (PAM) antennas. A nonlinear interaction between the electron density and the electric field has been characterized in a thin plasma layer in front of the two LHCD antennas. The resulting dependence of the power reflection coefficient with the LHCD power, leading occasionally to trips in the output power, is not predicted by the standard linear theory of the LH wave coupling. Therefore, it is important to investigate and understand the possible origin of such non-linear effects in order to avoid their possible deleterious consequences. The PICCOLO-2D code, which self-consistently treats the wave propagation in the antenna vicinity and its interaction with the local edge plasma density, is used to simulate Tore Supra discharges. The simulation reproduces very well the occurrence of a non-linear behavior in the coupling observed in the LHCD experiments. The important differences and trends between the FAM and the PAM antennas, especially a larger increase in RC for the FAM, are also reproduced by the PICCOLO-2D simulation. The working hypothesis of the contribution of the ponderomotive effect in the non-linear observations of LHCD coupling is therefore validated through this comprehensive modeling for the first time on the FAM and PAM antennas on Tore Supra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermal stability of photovoltaic a-Si:H determined by neutron reflectometry

Neutron and X-ray reflectometry were used to determine the layer structure and hydrogen content of thin films of amorphous silicon (a-Si:H) deposited onto crystalline silicon (Si) wafers for surface passivation in solar cells. The combination of these two reflectometry techniques is well suited for non-destructive probing of the structure of a-Si:H due to being able to probe buried interfaces and having sub-nanometer resolution. Neutron reflectometry is also unique in its ability to allow determination of density gradients of light elements such as hydrogen (H). The neutron scattering contrast between Si and H is strong, making it possible to determine the H concentration in the deposited a-Si:H. In order to correlate the surface passivation properties supplied by the a-Si:H thin films, as quantified by obtainable effective minority carrier lifetime, photoconductance measurements were also performed. It is shown that the minority carrier lifetime falls sharply when H has been desorbed from a-Si:H by annealing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

VUV/XUV measurements of impurity emission in plasmas with liquid lithium surfaces on LTX [VUV/XUV measurements of low recycling plasmas with liquid lithium surfaces on LTX]

The VUV/XUV spectrum has been measured on the Lithium Tokamak eXperiment (LTX) using a transmission grating imaging spectrometer (TGIS) coupled to a direct-detection x-ray charge-coupled device camera. TGIS data show significant changes in the ratios between the lithium and oxygen impurity line emission during discharges with varying lithium wall conditions. Lithium coatings that have been passivated by lengthy exposure to significant levels of impurities contribute to a large O/Li ratio measured during LTX plasma discharges. Furthermore, previous results have indicated that a passivated lithium film on the plasma facing components will function as a stronger impurity source when in the form of a hot liquid layer compared to a solid lithium layer. However, recent TGIS measurements of plasma discharges in LTX with hot stainless steel boundary shells and a fresh liquid lithium coating show lower O/Li impurity line ratios when compared to discharges with a solid lithium film on cool shells. In conclusion, these new measurements help elucidate the somewhat contradictory results of the effects of solid and liquid lithium on plasma confinement observed in previous experiments.

36 MATERIALS SCIENCE↗

GaLnAsP Solar Cells Grown by Hydride Vapor Phase Epitaxy for One-Sun & Low-Concentration III-V/Si Photovoltaics

Dynamic hydride vapor phase epitaxy (D-HVPE) has recently reemerged as a low-cost alternative to metalorganic chemical vapor deposition (MOCVD) for the growth of highefficiency III-V solar cells. Quaternary GaInAsP solar cells in the bandgap range of ~1.6-1.8 eV are promising top-cell candidates for III-V/Si tandem solar cells. In this work, we report on the development of lattice-matched GaInAsP (Eg~1.66 eV) solar cells grown via low-cost HVPE at very high growth rates of ~0.7 um/min (~42 um/h). We demonstrate for the first time HVPE grown passivated GaInAsP homojunction solar cells that show substantial improvement in the short-wavelength photoresponse attributed to the incorporation of a GaInP window layer. The heterointerfaces in these multilayer devices were characterized by transmission electron microscopy. The best device achieved a certified one-sun efficiency of 18.7% under AM1.5G, demonstrating the viability of HVPE to grow multilayered structures comprising ternary and quaternary alloys. This work represents a promising step towards low-cost III-V/Si tandem photovoltaics with one-sun efficiencies exceeding 30%.

14 SOLAR ENERGY↗

Passive and active control of jet turbulence

Techniques for controlling the generation, growth, and interactions of large coherent structures in turbulent flows are discussed, reviewing the results of recent experimental investigations. The fundamental principles of active and passive coherent-structure manipulation are outlined; the effects of geometric modification are examined for the case of an elliptic jet; and particular attention is given to passive control via self-excitation, turbulence and noise suppression, control of pairing interaction via two-frequency excitation, and unsteady boundary-layer separation in wall jets. Diagrams and graphs of typical results are provided.

Fazle Hussain, A. K. M.↗

Analysis of Saturn's Thermal Emission at 2.2-cm Wavelength: Spatial Distribution of Ammonia Vapor

This work focuses on determining the latitudinal structure of ammonia vapor in Saturn's cloud layer near 1.5 bars using the brightness temperature maps derived from the Cassini RADAR (Elachi et al., 2004) instrument, which works in a passive mode to measure thermal emission from Saturn at 2.2-cm wavelength. We perform an analysis of five brightness temperature maps that span epochs from 2005 to 2011, which are presented in a companion paper by Janssen et al. (2013a, this issue). The brightness temperature maps are representative of the spatial distribution of ammonia vapor, since ammonia gas is the only effective opacity source in Saturn's atmosphere at 2.2-cm wavelength. Relatively high brightness temperatures indicate relatively low ammonia relative humidity (RH), and vice versa. We compare the observed brightness temperatures to brightness temperatures computed using the Juno atmospheric microwave radiative transfer (JAMRT) program which includes both the means to calculate a tropospheric atmosphere model for Saturn and the means to carry out radiative transfer calculations at microwave frequencies. The reference atmosphere to which we compare has a 3x solar deep mixing ratio of ammonia (we use 1.352x10(exp -4) for the solar mixing ratio of ammonia vapor relative to H2; see Atreya, 2010) and is fully saturated above its cloud base. The maps are comprised of residual brightness temperatures-observed brightness temperature minus the model brightness temperature of the saturated atmosphere.

Atmospheres↗