Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generative diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Developing Novel Multifunctional Materials for High-Efficiency Electrical Energy Storage

This is the final report for the program “Developing Novel Multifunctional Materials for High-efficiency Electrical Energy Storage”, funded by The U.S. Department of Energy’s (DOE) National Energy Technology Laboratory (NETL), and performed by University of Tennessee, from September 01, 2013 to August 31, 2018. Securing a sustainable energy economy by developing affordable and clean energy from renewable energy is a central element to the mission of DOE/NETL. To further this mission, NETL funds research and development of novel multifunctional materials that can be used for high-efficiency electrical energy storage. The main objective of this research program is to conduct fundamental and applied research that lead to successful development and demonstration of novel multifunctional materials, which can improve the efficiency and reduce the cost of hydrogen production with water electrolysis. The specific objectives of this research program include: 1) Design, fabrication and demonstration of thin/well-tunable liquid/gas diffusion layer (TT-LGDLs) with different pore morphologies, including pore sizes and pore porosities. 2) Development of comprehensive computational models of proton exchange membrane water electrolyzer cell (PEMECs) for the investigation of influence of different operating conditions and physical design parameters on its performance. 3) Surface modification of TT-LGDLs for better catalyst access and product/reactant removal, and smaller interfacial contact resistance (ICR). To achieve the above challenging goals, a multidisciplinary research team was formed to work on fundamental and applied research on the following three major technical areas: 1) Design, fabrication and demonstration of thin/well-tunable LGDLs (TT-LGDLs) by using photolithography and wet etching of thin titanium (Ti) foils. During the project period, the team has successfully fabricated TT-LGDLs with different pore morphologies, including pore sizes and pore porosities. The manufacturing steps mainly include cleaning thin Ti foil, supporting the foils, applying photoresist, patterning the photoresist with designed mask, exposing and developing, etching, removing photoresist, and lift-off and cleaning. The manufactured TT-LGDLs were characterized with optical microscopies and scanning electron microscopies. Their pore morphologies, including pore size and porosity, were derived based on advanced image process. The feasibility for scale-up manufacturing has been demonstrated. The TT-LGDLs have been successfully investigated for water splitting in PEMECs, which showing better performance than their counterparts fabricated with the traditional fiber-based materials. 2) Comprehensive computational modeling of a PEMEC. A comprehensive computational model has been successfully developed, and the influence of different operating conditions and physical design parameters on its performance has been investigated, including operating temperature, pressure, exchange current density, electrode thickness, membrane thickness, and interfacial resistance. Results obtained from the present model provide a comprehensive understanding of design parameter effects and consequently improve the design/performance in a PEMEC. 3) Surface modification of TT-LGDLs. The proposed surface modifications of TT-LGDLs by sputter coating and/ electroplating have been successfully demonstrated. It has been found that the performance of PEMECs can be improved by both methods, and the thickness of the electroplated gold thin layer has limited effects on the performance. With the help of the surface modifications, the PEMECs achieved the best ever performance compared with the public literatures. In addition to completion of the proposed method, microporous layers (MPLs) with both irregular micro and sphere nano titanium particles on novel TT-LGDLs was developed for the first time. The MPLs were fabricated by a low-temperature air spraying method, which provide a better catalyst access and product/reactant removal. In summary, under the close collaborations among the research team, all the tasks have been completed and the proposed research objectives have been fulfilled. All the technical milestones have been achieved and the project has been completed successfully. The technical breakthroughs obtained under this project provide novel LGDLs with well-tunable pore morphologies that can significantly improve the performance of water splitting and energy storage. This development can be directly used in existing and next generation energy storage and fuel systems.

08 HYDROGEN↗

Turbulent dynamo in a conducting fluid and a partially ionized gas

By following the Kazantsev theory and taking into account both microscopic and turbulent diffusion of magnetic fields, we develop a unified treatment of the kinematic and nonlinear stages of a turbulent dynamo process, and we study the dynamo process for a full range of magnetic Prandtl number P {sub m} and ionization fractions. We find a striking similarity between the dependence of dynamo behavior on P {sub m} in a conducting fluid and R (a function of ionization fraction) in a partially ionized gas. In a weakly ionized medium, the kinematic stage is largely extended, including not only exponential growth but a new regime of dynamo characterized by a linear-in-time growth of magnetic field strength, and the resulting magnetic energy is much higher than the kinetic energy carried by viscous-scale eddies. Unlike the kinematic stage, the subsequent nonlinear stage is unaffected by microscopic diffusion processes and has a universal linear-in-time growth of magnetic energy with the growth rate as a constant fraction 3/38 of the turbulent energy transfer rate, showing good agreement with earlier numerical results. Applying the analysis to the first stars and galaxies, we find that the kinematic stage is able to generate a field strength only an order of magnitude smaller than the final saturation value. But the generation of large-scale magnetic fields can only be accounted for by the relatively inefficient nonlinear stage and requires longer time than the free-fall time. It suggests that magnetic fields may not have played a dynamically important role during the formation of the first stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Prediction of divertor heat flux width for ITER using BOUT++ transport and turbulence module

Investigation of turbulent transport dynamics in scrape-off-layer (SOL) and divertor heat flux width prediction is performed for ITER. Both BOUT++ transport and BOUT++ turbulence codes are applied to capture the physics on different temporal scales. Simulations start with an ITER 15MA baseline scenario profile generated by CORSICA (Kim et al 2015 Paper ITER_D_R9T8J9 v1.1). In BOUT++ transport code, the plasma parameters ( n i , T i , T e ) and radial electric () profiles are evolved to steady state. Here, the initial plasma profiles inside the separatrix are taken from CORSICA scenario studies. Transport coefficients are calculated by inverting the plasma profiles inside the separatrix.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cosmic ray anisotropy as signature for the transition from galactic to extragalactic cosmic rays

We constrain the energy at which the transition from Galactic to extragalactic cosmic rays occurs by computing the anisotropy at Earth of cosmic rays emitted by Galactic sources. Since the diffusion approximation starts to loose its validity for E/Z∼>10{sup 16−17} eV, we propagate individual cosmic rays using Galactic magnetic field models and taking into account both their regular and turbulent components. The turbulent field is generated on a nested grid which allows spatial resolution down to fractions of a parsec. Assuming sufficiently frequent Galactic CR sources, the dipole amplitude computed for a mostly light or intermediate primary composition exceeds the dipole bounds measured by the Auger collaboration around E ≈ 10{sup 18} eV. Therefore, a transition at the ankle or above would require a heavy composition or a rather extreme Galactic magnetic field with strength ∼>10 μG. Moreover, the fast rising proton contribution suggested by KASCADE-Grande data between 10{sup 17} eV and 10{sup 18} eV should be of extragalactic origin. In case heavy nuclei dominate the flux at E∼>10{sup 18} eV, the transition energy can be close to the ankle, if Galactic CRs are produced by sufficiently frequent transients as e.g. magnetars.

79 ASTRONOMY AND ASTROPHYSICS↗

Completing the Cleanup of the US Department of Energy's East Tennessee Technology Park - Four Years Early - 16067

On August 1, 2011, URS - CH2M Oak Ridge LLC (UCOR) began its $2.6 billion cleanup of the East Tennessee Technology Park (ETTP), the former Oak Ridge Gaseous Diffusion Plant, located on the U.S. Department of Energy's (DOE) Oak Ridge Reservation (ORR) in Tennessee. Under the contract, the scope of work to be completed includes demolition of all gaseous diffusion buildings, namely K-25, K-31 and K-27, as well as other facilities such as the Toxic Substance Control Act (TSCA) Incinerator, the K-1200 Centrifuge Complex and the K-1037 Barrier Plant. Additionally, UCOR will remove contaminated soils and treat contaminated groundwater. Waste generated by these cleanup activities will be disposed at onsite as well as offsite facilities. UCOR will also continue to manage hundreds of the DOE Oak Ridge Office of Environmental Management (OREM)-owned facilities across the ORR. Due largely to funding challenges early in the project, the DOE estimated in their October 2013 Program Plan 2014-2024 that ETTP cleanup would not be achieved until 2024, four years later than originally scheduled in UCOR's contract with the DOE. In November 2014, the DOE Manager for OREM, Susan Cange, publicly shared her 'vision' for ETTP cleanup by 2020, four years earlier than the DOE's current plan. As part of Vision 2020, all gaseous diffusion buildings would be demolished by the end of 2016. In response to Ms. Cange's vision, UCOR published a Strategic Plan describing how ETTP could be cleaned up by 2020, provided that a number of funding and programmatic and technical challenges could be overcome. UCOR is in the midst of implementing its Strategic Plan, and progress is being made to that end. Since assuming its responsibilities as the ETTP cleanup contractor, UCOR has completed its life-cycle Performance Measurement Baseline (PMB); received its Earned Value Management System (EVMS) certification; completed the D and D of the 44-acre K-25 and 17-acre K-31 gaseous diffusion buildings; completed the K-1070- B Burial Ground remediation project; completed RCRA closure of the TSCA Incinerator; and disposed of more than 541,411 cubic yards of cleanup waste while managing the on-site Environmental Management Waste Management Facility (EMWMF). In 2015, UCOR achieved safety 'Star Status' under the DOE's Voluntary Protection Program (VPP); completed the demolition of the K-31 gaseous diffusion building; advanced the characterization and deactivation of the K-27 gaseous diffusion building, readying the building for the start of demolition in 2016; and began characterization activities in the K-1037 Barrier Plant as well as a number of facilities in the Poplar Creek Area of the ETTP Site. Project performance through December 31, 2015, is as follows: Cost Performance Index - 1.12, Schedule Performance Index - 1.02. Since safety is the foundation of all cleanup work, UCOR's safety record goes hand-in-hand with its project performance. Through calendar year 2015, UCOR's recordable injury rate was 0.94 occurrences per 200,000 work hours, and the day away case rate was 0.31. These rates are both below the DOE and UCOR goals. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Dynamics of interacting qubits coupled to a common bath: Non-Markovian quantum-state-diffusion approach

Non-Markovian dynamics is studied for two interacting qubits strongly coupled to a dissipative bosonic environment. We derive a non-Markovian quantum-state-diffusion (QSD) equation for the coupled two-qubit system without any approximations, and in particular, without the Markov approximation. As an application and illustration of our derived time-local QSD equation, we investigate the temporal behavior of quantum coherence dynamics. In particular, we find a strongly non-Markovian regime where entanglement generation is significantly modulated by the environmental memory. Additionally, we study residual entanglement in the steady state by analyzing the steady-state solution of the QSD equation. Finally, we discuss an approximate QSD equation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermophysical properties of FLiBe using moment tensor potentials

Fluoride salts are prospective materials for applications in some next-generation nuclear reactors and their thermophysical properties at various conditions are of interest. Experimental measurement of the properties of these salts is often difficult and, in some cases, unfeasible due to challenges from high temperatures, impurity control, and corrosivity. Therefore, accurate theoretical methods are needed for fluoride salt property prediction. In this work, we used moment tensor potentials (MTP) to approximate the potential energy surface of eutectic FLiBe (66.6% LiF – 33.3% BeF2) predicted by the ab initio (DFT-D3) method. Here, we then used the developed potential and molecular dynamics to obtain several thermophysical properties of FLiBe, including radial distribution functions, density, self-diffusion coefficients, thermal expansion, specific heat capacity, bulk modulus, viscosity, and thermal conductivity. Our results show that the MTP potential approximates the potential energy surface accurately and the overall approach yields very good agreement with experimental values. The converged fitting can be obtained with less than 600 configurations generated from DFT calculations, which data can be generated in just 1200 core hours on today's typical processors. The MTP potential is faster than many machine learning potentials and about one order of magnitude slower than widely used empirical molten salt potentials such as Tosi/Fumi.

36 MATERIALS SCIENCE↗

Structure determination of an integral membrane protein at room temperature from crystals in situ

The X-ray structure determination of an integral membrane protein using synchrotron diffraction data measured in situ at room temperature is demonstrated. The structure determination of an integral membrane protein using synchrotron X-ray diffraction data collected at room temperature directly in vapour-diffusion crystallization plates (in situ) is demonstrated. Exposing the crystals in situ eliminates manual sample handling and, since it is performed at room temperature, removes the complication of cryoprotection and potential structural anomalies induced by sample cryocooling. Essential to the method is the ability to limit radiation damage by recording a small amount of data per sample from many samples and subsequently assembling the resulting data sets using specialized software. The validity of this procedure is established by the structure determination of Haemophilus influenza TehA at 2.3 Å resolution. The method presented offers an effective protocol for the fast and efficient determination of membrane-protein structures at room temperature using third-generation synchrotron beamlines.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Melting and solidification dynamics during laser melting of reaction-based metal matrix composites uncovered by in-situ synchrotron X-ray diffraction

Laser additive manufacturing (AM) of reaction-based metal matrix composites (MMCs) involves highly complex and non-equilibrium material transformation behavior, including melting, dissolution, precipitation, and solidification. Yet, the dynamics and interplay of these phase transformation processes remain poorly understood, posing substantial challenges in identifying the microstructure formation mechanism, and predicting and controlling the microstructure in the printed parts. Here, in this study, we performed the in-situ X-ray diffraction experiment to characterize the phase evolution dynamics of the 316L + 10 vol.%TiC system during laser melting, which provides direct and quantitative insights of the complex phase reaction and evolution dynamics under rapid heating and cooling conditions relevant to additive manufacturing of reaction-based MMCs. Further in-depth thermodynamic and kinetic calculations revealed that most of the phase evolution behavior observed in the in-situ X-ray diffraction experiment cannot be solely explained by widely used equilibrium thermodynamic models, and diffusion-controlled nonequilibrium dissolution and precipitation kinetics must be considered to elucidate the complex phase evolution behavior, including incomplete TiC dissolution, and three-step TiC precipitation. The three distinct types of precipitates generate unique hierarchical TiC micro- and nanostructures, which enhances the yield strength from 513 MPa to 877 MPa by 71 %, tensile strength from 628 MPa to 1054 MPa by 68 %, and Young's modulus from 193 GPa to 221 GPa by 14 %. The findings of our research provide the knowledge foundation for the design of unique microstructures and advanced MMC materials through laser AM.

36 MATERIALS SCIENCE↗

Theoretical estimate of the effect of thermal agitation on ribosome motion generated by stochastic microswimming

The effect of thermal agitation on ribosome motion is evaluated through the Péclet number, assuming that the ribosome is self-propelled along the mRNA during protein synthesis by a swimming stroke consisting of a cycle of stochastically-generated ribosome configurations involving its two subunits. The ribosome velocity probability distribution function is obtained, giving an approximately normal distribution. Its mean and variance together with an estimate of the in vivo free diffusion coefficient of the ribosome and using only configuration changes of small size, give a Péclet number similar to motor proteins and microorganisms. These results suggest the feasibility of the stochastic microswimming hypothesis to explain ribosome motion. - Highlights: • Hypothesis: the ribosome swims along the mRNA during protein synthesis. • How can withstand the thermal agitation of the particles in the surrounding fluid? • The Péclet number Pe is calculated estimating the in vivo diffusion coefficient. • With small size deformations the ribosome has speeds similar to motor proteins. • Similar Pe values for the ribosome and the motor proteins mean feasible hypothesis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Liquid–Liquid Microfluidic Flows for Ultrafast 5-Hydroxymethyl Furfural Extraction

We study the effects of liquid–liquid flow patterns on the extraction of 5-hydroxymethyl furfural from the aqueous phase into an organic phase (methyl isobutyl ketone, ethyl acetate, and 2-pentanol) at ultrashort residence times of 0.2–20 s in a coiled capillary microchannel. Slug, droplet, slug-droplet, dispersed, parallel, annular, and irregular two-phase flow patterns are generated. We evaluate the extraction efficiency and the volumetric mass transfer coefficient via experiments and computational fluid dynamics (CFD). The CFD predictions are in quantitative agreement with the experimental data. The convective and diffusive contributions to the mass transfer of different flow patterns are analyzed. For all solvent pairs, the extraction efficiency varies irregularly with increasing flow rate due to changes in the mass transfer mechanism caused by a transition between flow regimes. Overall, we demonstrate >90% extraction efficiencies with high volumetric mass transfer coefficients ranging from 0.006 to 2.17 s–1. Furthermore, a merit index is defined to assess the trade-off between the fast mass transfer and the pressure drop in biphasic microchannels. In general, the mass transfer rate increases significantly at high flow rates at the expense of a high-pressure drop. Furthermore, the ethyl acetate/water irregular flow pattern is optimal due to a large throughput, extraction efficiency, and mass transfer coefficient, with a minimal pressure drop.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polyethylene Upcycling to Diacids Using Acid-Only Activation

There is a pressing need to develop plastic recycling technologies. Chemical upcycling converts low-value waste plastics into higher-value products. Here, polyethylene (PE) upcycling is accomplished by using acid-only activation of PE (PEAA), thus eliminating costly and toxic organic solvents. Acid mixtures of chlorosulfuric acid (CSA) and sulfuric acid (SA) were used to effectively sulfonate PE, allowing for subsequent facile depolymerization. Molecular deconstruction of sulfonated PE using H 2 O 2 in the presence of an Fe(III) catalyst achieved molar yields of C 2 –C 4 diacids exceeding 40% (based on estimates of acids generated from sulfonates). The sulfonation step using PEAA is hypothesized to follow a shrinking core mechanism (SCM), in which PE particles quickly reach a saturated state in the outer sulfonated layer as CSA diffuses radially inward. This proposed mechanism is supported by the fact that, regardless of the extent of sulfonation, similar molar yields of products and ratios of liberated carbon to sulfur are observed. Modeling and experimentation show that deviations from the SCM occur by lowering the Damköhler number (Da) or increasing CSA solubility in PE. In both cases, CSA diffusion is enhanced, which favors kinetically limited sulfonation.

36 MATERIALS SCIENCE↗

2D Covalent Organic Frameworks as Intrinsic Photocatalysts for Visible Light-Driven CO 2 Reduction

Covalent organic framework (COF) represents an emerging class of porous materials that have exhibited great potential in various applications, particularly in catalysis. Here, we report a newly designed 2D COF with incorporated Re complex, which exhibits intrinsic light absorption and charge separation (CS) properties. We show that this hybrid catalyst can efficiently reduce CO 2 to form CO under visible light illumination with high electivity (98%) and better activity than its homogeneous Re counterpart. Moreover, using advanced transient optical and X-ray absorption spectroscopy and in situ diffuse reflectance spectroscopy, we unraveled three key intermediates that are responsible for CS, the induction period, and rate limiting step in catalysis. This work not only demonstrates the potential of COFs as next generation photocatalysts for solar fuel conversion but also provide unprecedented insight into the mechanistic origins for light-driven CO 2 reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Peculiar long-range supercurrent in superconductor-ferromagnet-superconductor junction containing a noncollinear magnetic domain in the ferromagnetic region

We study the supercurrent in clean superconductor-ferromagnet-superconductor heterostructure containing a noncollinear magnetic domain in the ferromagnetic region. It is demonstrated that the magnetic domain can lead to a spin-flip scattering process, which reverses the spin orientations of the singlet Cooper pair and simultaneously changes the sign of the corresponding electronic momentum. If the ferromagnetic layers on both sides of magnetic domain have the same features, the long-range proximity effect will take place. That is because the singlet Cooper pair will create an exact phase-cancellation effect and gets an additional π phase shift as it passes through the entire ferromagnetic region. Then, the equal spin triplet pair only exists in the magnetic domain region and can not diffuse into the other two ferromagnetic layers. So, the supercurrent mostly arises from the singlet Cooper pairs, and the equal spin triplet pairs are not involved. This result can provide a approach for generating the long-range supercurrent.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of magnetic islands on the localization of kinetic Alfvén wave

Recent studies have revealed an intimate link between magnetic reconnection and turbulence. Observations show that kinetic Alfvén waves (KAWs) play a very crucial role in magnetic reconnection and have been a topic of interest from decades in the context of turbulence and particle heating. In the present paper, we study the role that KAW plays in the formation of coherent structures/current sheets when KAW is propagating in the pre-existing fully developed chain of magnetic islands. We derived the dynamical equation of KAW in the presence of chain of magnetic islands and solved it using numerical simulations well as analytic tools. Due to pre-existing chain of magnetic islands, KAW splits into coherent structures and the scale size of these structures along transverse directions (with respect to background magnetic field) comes out to be either less than or greater than ion gyro radius. Therefore, the present work may be the first step towards understanding how magnetic reconnection generated islands may affect the KAW localization and eventually contribute to magnetic turbulence. In this way the present approach may be helpful to understand the interplay between magnetic reconnection and turbulence in ion diffusion region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling laser interactions with aluminum and tantalum targets using a hybrid atomistic-continuum model

A hybrid atomistic-continuum method can model the microstructure evolution of metals subjected to laser irradiation. This method combines classical molecular dynamics (MD) simulations with the two-temperature model (TTM) to account for the laser energy absorption and heat diffusion behavior. Accurate prediction of the temperature evolution in the combined MD-TTM method requires reliable accuracy in electron heat capacity, electron thermal conductivity, and electron–phonon coupling factor across the temperatures generated. This study uses the electronic density of states (DOS) obtained from first-principle calculations. The calculated electron temperature-dependent parameters are used in MD-TTM simulations to study the laser metal interactions in FCC and BCC metals and the phenomenon of laser shock loading and melting. This study uses FCC Al and BCC Ta as model systems to demonstrate this capability. When subjected to short pulsed laser shocks, the dynamic failure behavior predicted using temperature-dependent parameters is compared with the experimentally reported single-crystal and nanocrystalline Al and Ta systems. The MD-TTM simulations also investigate laser ablation and melting behavior of Ta to compare with the ablation threshold reported experimentally. In conclusion, this manuscript demonstrates that integrating the temperature-dependent parameters into MD-TTM simulations leads to the accurate modeling of the laser–metal interaction and allows the prediction of the kinetics of the solid–liquid interface.

36 MATERIALS SCIENCE↗

EFFECT OF METALLICITY ON X-RAY EMISSION FROM THE WARM-HOT INTERGALACTIC MEDIUM

Hydrodynamic simulations predict that a significant fraction of the gas in the current universe is in the form of high temperature, highly ionized plasma emitting and absorbing primarily in the soft X-ray and UV bands, dubbed the warm-hot intergalactic medium (WHIM). Its signature should be observable in redshifted emission and absorption lines from highly ionized elements. To determine the expected WHIM emission in the soft X-ray band we used the output of a large scale smoothed particle hydrodynamic simulation to generate images and spectra with angular resolution of 14'' and energy resolution of 1 eV. The current biggest limit of any hydrodynamic simulation in predicting the X-ray emission comes from metal diffusion. In our investigation, by using four different models for the WHIM metallicity we have found a strong dependence of the emission on the model used, with differences up to almost an order of magnitude. For each model, we have investigated the redshift distribution and angular scale of the emission, confirming that most photons come from redshift z < 1.2 and that the emission has a typical angular scale of less than a few arcminutes. We also compared our simulations with the few currently available observations and found that, within the variation of the metallicity models, our predictions are in good agreement with current constraints on the WHIM emission, and at this time the weak experimental constraints on the WHIM emission are not sufficient to exclude any of the models used.

79 ASTRONOMY AND ASTROPHYSICS↗

XMM-NEWTON OBSERVATIONS OF MBM 12: MORE CONSTRAINTS ON THE SOLAR WIND CHARGE EXCHANGE AND LOCAL BUBBLE EMISSIONS

We present the first analysis of an XMM-Newton observation of the nearby molecular cloud MBM 12. We find that in the direction of MBM 12 the total O VII (0.57 keV) triplet emission is 1.8{sup +0.5}{sub -0.6} photons cm{sup -2} s{sup -1} sr{sup -1} (or line units, LU) while for the O VIII (0.65 keV) line emission we find a 3{sigma} upper limit of <1 LU. We use a heliospheric model to calculate the O VII and O VIII emission generated by Solar Wind Charge-eXchange (SWCX) which we compare to the XMM-Newton observations. This comparison provides new constraints on the relative heliospheric and Local Bubble contributions to the local diffuse X-ray background. The heliospheric SWCX model predicts 0.82 LU for O VII, which accounts for {approx}46% {+-} 15% of the observed value, and 0.33 LU for the O VIII line emission consistent with the XMM-Newton observed value. We discuss our results in combination with previous observations of MBM 12 with Chandra and Suzaku.

79 ASTRONOMY AND ASTROPHYSICS↗