SEARCH · Engineering Papers

Results for “driving”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Small passenger car transmission test; Ford C4 transmission

A 1979 Ford C4 automatic transmission was tested per a passenger car automatic transmission test code (SAE J651b) which required drive performance, coast performance, and no load test conditions. Under these test conditions, the transmission attained maximum efficiencies in the mid-eighty percent range for both drive performance tests and coast performance tests. The major results of this test (torque, speed, and efficiency curves) are presented. Graphs map the complete performance characteristics for the Ford C4 transmission.

Bujold, M. P.↗

NASA NTRS1980

Small passenger car transmission test; Chevrolet LUV transmission

A 1978 Chevrolet LUV manual transmission tested per the applicable portions of a passenger car automatic transmission test code (SAE J65lb) which required drive performance, coast performance, and no load test conditions. Under these test conditions, the transmission attained maximum efficiencies in the upper ninety percent range for both drive performance tests and coast performance tests. The major results of this test (torque, speed, and efficiency curves) are presented. Graphs map the complete performance characteristics for the Chevrolet LUV transmission.

Bujold, M. P.↗

NASA NTRS1979

Measurements of reactive gaseous rocket injector admittances

The paper describes the results of an experimental study of the quantitative determination of the capabilities of the combustion processes associated with coaxial gaseous propellant rocket injectors to drive combustor pressure oscillations. The data, obtained by employing the modified impedance tube technique with compressed air as the oxidizer and acetylene gas as the fuel, describe the frequency dependence of the admittance of the combined injector-combustion process. The measured data are compared with the predictions of the Feiler and Heidmann analytical model utilizing different values for the characteristic combustion time tau sub b. The values of tau sub b which result in a best fit between the measured and predicted data are indicated for different equivalence ratios. It is shown that for the coaxial injector investigated in this study the tau sub b varies between 0.7 and 1.2 msec for equivalence ratios in the range of 0.57 to 1.31. In addition, the experimental data indicate that the tested injector system could drive combustion instabilities over a frequency range that is in qualitative agreement with the predictions of the Feiler and Heidmann model.

Janardan, B. A.↗

NASA NTRS1979

Minimizing pattern effects in semiconductor lasers at high rate pulse modulation

This paper deals with analytical and experimental work related to modulation of a semiconductor laser used in high bit rate communication. The approach is based upon minimizing the charge storage effect by a proper choice of the area of the modulating pulses and the bias current. The concept of using additional current pulses to probe for variations in electron density between pulses is investigated. The primary limitation on bit rate is found to be the ability to generate laser drive pulses free of ringing or similar transients. This and the 300 ps pulsewidth, an experimental constraint, limit the bit rate to about 1 Gbit/s. However, by using this approach it appears that bit rates considerably higher than 2 Gbits/s could be reached with sufficiently accurate control of drive pulse shape. It is found that the laser bias and the current pulse area had to be controlled within 1 percent and 10 percent, respectively.

Torphammar, P.↗

NASA NTRS1979

Computed voltage distribution around Solar Electric Propulsion spacecraft

The paper uses the NASCAP computer code to compute voltage distributions around a Solar Electric Propulsion (SEP) spacecraft as it encounters an idealized geomagnetic substorm environment. Consideration is given to both a standard operating voltage and direct-drive voltage configuration. The computations are presented without thruster operations as well as with a simplified, simulated thruster-on representation for direct-drive configuration only. Finally, it is stressed that the computations seeking possible areas of concern in the spacecraft design are exploratory.

Stevens, N. J.↗

NASA NTRS1980

Form-drag instability, multiple equilibria and propagating planetary waves in baroclinic, orographically forced, planetary wave systems

A two-layer baroclinic model is used to study the planetary-scale motions of a thermally driven atmosphere in the presence of topography, and in doing so to extend previous results obtained with a barotropic model. Highly truncated spectral equations are used to obtain multiple wavelike stationary equilibrium states, to examine the instabilities that produce them, and to study the instabilities that feed on them and give rise to traveling planetary waves. Although the equilibria cannot exist without orography, their energy comes from the potential energy of the mean flow, not from kinetic energy transfer via the mountain torque. Low-index (blocking) equilibria as well as high-index equilibria require a large thermal driving and are associated with both orographic and baroclinic instability of the Hadley circulation. It is suggested that blocking in nature is a quasi-stable circulation arising from orographic instability with strong thermal driving; and that observed low-frequency, propagating planetary waves are due to instabilities of the quasi-stationary, topographically forced equilibria.

Charney, J. G.↗

NASA NTRS1980

An 8 x 10 to the 5th bit bubble memory cell for spacecraft applications

A multiple chip magnetic bubble memory cell design developed for NASA embodies the low power, low weight, environmental tolerance and reliability necessary for successful operation in spacecraft launch and mission environments. Packaging of multiple chips in a common magnetic bias, drive coil assembly reduces weight and volume overhead per chip and also reduces the number of coil drive components required. This 8 x 10 to the 5th bit cell is conduction cooled and provides a metal and ceramic sealed hermetic chip environment.

Becker, F. J.↗

NASA NTRS1982

Orienting and Applying Flux to Solar Cells

Solar cells are oriented and fluxed automatically at first work station along solar-array assembly line. In under 2 seconds rotary drive rotates cell into proper position for applying solder flux to bus pad on collector side. When contact bus pad is in correct position, capstan drive is disengaged, and vacuum holddown beneath cell is turned on. Flux system lowers and applies preset amount of solder flux to bus pad. Two interconnect tabs are soldered to fluxed areas.

Feder, H.↗

NASA NTRS1980

Vehicle systems design optimization study

The optimum vehicle configuration and component locations are determined for an electric drive vehicle based on using the basic structure of a current production subcompact vehicle. The optimization of an electric vehicle layout requires a weight distribution in the range of 53/47 to 62/38 in order to assure dynamic handling characteristics comparable to current internal combustion engine vehicles. Necessary modification of the base vehicle can be accomplished without major modification of the structure or running gear. As long as batteries are as heavy and require as much space as they currently do, they must be divided into two packages, one at front under the hood and a second at the rear under the cargo area, in order to achieve the desired weight distribution. The weight distribution criteria requires the placement of batteries at the front of the vehicle even when the central tunnel is used for the location of some batteries. The optimum layout has a front motor and front wheel drive. This configuration provides the optimum vehicle dynamic handling characteristics and the maximum passenger and cargo space for a given size vehicle.

Gilmour, J. L.↗

NASA NTRS1980

JPL's electric and hybrid vehicles project: Project activities and preliminary test results

Efforts to achieve a 100 mile urban range, to reduce petroleum usage 40% to 70%, and to commercialize battery technology are discussed with emphasis on an all plastic body, four passenger car that is flywheel assisted and battery powered, and on an all metal body, four passenger car with front wheel drive and front motor. For the near term case, a parallel hybrid in which the electric motor and the internal combustion engine may directly power the drive wheels, is preferred to a series design. A five passenger car in which the electric motor and the gasoline engine both feed into the same transmission is discussed. Upgraded demonstration vehicles were tested using advanced lead acid, nickel zinc, nickel iron, and zinc chloride batteries to determine maximum acceleration, constant speed, and battery behavior. The near term batteries demonstrated significant improvement relative to current lead acid batteries. The increase in range was due to improved energy density, and ampere hour capacity, with relatively 1 small weight and volume differences.

Barber, T. A.↗

NASA NTRS1980

Small passenger car transmission test: Dodge Omni A-404 transmission

The small passenger car transmission test was initiated to supply electric vehicle manufacturers with technical information regarding the performance of commercially available transmissions. This transmission was tested in accordance with a passenger car automatic transmission test code (SAE J65lb) which required drive performance, coast performance, and no load test conditions. Under these test conditions, the transmission attained maximum efficiencies in the mid eighty percent range for both drive performance test and coast performance tests.

Bujold, M. P.↗

NASA NTRS1980

Experimental determination of the admittances of aluminized propellants by the impedance tube method

The adaptation of the impedance tube concept for the determination of the pressure coupled admittances and response functions of burning solid propellants is discussed. The results obtained in experiments with UTP-3001 and UTP-19360 aluminized propellants are presented. It is shown that the admittance Y remains constant during the quasi-steady burn period of a test, indicating constant driving of the gas phase disturbance by the burning solid propellant. The measured real part of the admittance is positive, indicating that the burning aluminized propellant is driving the gas phase oscillations. In addition, the measured high gas phase damping, provided by the aluminum oxide particles in the gas phase, suggests that the latter can significantly increase the damping in unstable solid rockets over the investigated frequency range. Finally, it is shown that the wave structure obtained by numerically solving the impedance tube wave equations which utilize the determined propellant admittance as an initial condition and the determined value of G to describe the gas phase losses is in excellent agreement with the measured wave structure.

Baum, J. D.↗

NASA NTRS1981

A fully redundant power hinge for LANDSAT-D appendages

The configuration and testing of a power driven hinge for deployment of the solar array and antenna boom for the LANDSAT-D spacecraft is discussed. The hinge is fully mechanically and electrically redundant and, thereby, can sustain a single point failure of any one motor (or its power supply), speed reducer, or bearing set without loss of its ability to function. This design utilizes the capability of the stepper motor drive to remove the flexibility of the drive train from the joint stiffness equation when the hinge is loaded against its stop. This feature precludes gapping of the joint under spacecraft maneuver loads even in the absence of a latching feature. Thus, retraction is easily accomplished by motor reversal without the need for a solenoid function to remove the latch.

Mamrol, F. E.↗

NASA NTRS1980

MOD-OA 200 kW wind turbine generator engineeringing

Engineering drawings and the detailed mechanical and electrical design of a horizontal-axis wind turbine designed for DOE at the NASA Lewis Research Center and installed in Clayton, New Mexico are discussed. The drawings show the hub, pitch change mechanism, drive train, nacelle equipment, yaw drive system, tower, foundation, electrical power systems, and the control and safety systems.

Andersen, T. S.↗

NASA NTRS1981

Advanced dc motor controller for battery-powered electric vehicles

A motor generation set is connected to run from the dc source and generate a voltage in the traction motor armature circuit that normally opposes the source voltage. The functional feasibility of the concept is demonstrated with tests on a Proof of Principle System. An analog computer simulation is developed, validated with the results of the tests, applied to predict the performance of a full scale Functional Model dc Controller. The results indicate high efficiencies over wide operating ranges and exceptional recovery of regenerated energy. The new machine integrates both motor and generator on a single two bearing shaft. The control strategy produces a controlled bidirectional plus or minus 48 volts dc output from the generator permitting full control of a 96 volt dc traction motor from a 48 volt battery, was designed to control a 20 hp traction motor. The controller weighs 63.5 kg (140 lb.) and has a peak efficiency of 90% in random driving modes and 96% during the SAE J 227a/D driving cycle.

Belsterling, C. A.↗

NASA NTRS1981

An investigation of drag reduction for a box-shaped vehicle with various modifications

The influence of physical variables on the aerodynamic drag of a box shaped vehicle model was studied. The physical variables included built-in rounded front corners, and two different designs of add on flow vanes for the front of box shaped vehicle with 67 deg and 90 deg of arc. For a diesel powered vehicle, only slightly larger than a family van, the built in rounded front corners provide a calculated fuel saving of about 6.0 liters per hour of driving (1.6 gallons per hour) at 88.6 km per hour (55 mph) in national average winds, as compared to the baseline vehicle having all square corners. The corresponding savings for a baseline vehicle to which front mounted flow vanes were added is competitive. For a gasoline powered vehicle the volumetric fuel savings would be larger by a factor of about 1.7. The fuel savings for a standard size motor home would be greater for the diesel or gasoline powered vehicles by from 30 to 35 percent because of the larger frontal area. Thus projected fuel savings for a standard size motor home powered by gasoline can approach 12.5 to 13.5 liters (3.3 to 3.6 gallons) for each hour driving at highway speeds.

Muirhead, V. U.↗

NASA NTRS1980

Verification of elastic-wave static displacement in solids

The solution of the nonlinear differential equation which describes an initially sinusoidal finite-amplitude elastic wave propagating in a solid contains a static-displacement term in addition to the harmonic terms. The static-displacement amplitude is theoretically predicted to be proportional to the product of the squares of the driving-wave amplitude and the driving-wave frequency. The first experimental verification of the elastic-wave static displacement in a solid (the 111 direction of single-crystal germanium) is reported, and agreement is found with the theoretical predictions.

Cantrell, J. H., Jr.↗

NASA NTRS1981

The hot plasma environment and floating potentials of an electron-beam-emitting rocket in the ionosphere

The plasma environment surrounding the Echo III accelerator payload is examined with an extensive array of particle sensors. Suprathermal electrons are produced isotropically around the payload during the gun firings and decay away in approximately 32 ms. The largest directional intensities of this component are observed at the higher altitudes. Quick echo electrons are also observed to produce suprathermal electrons when they encounter the payload. The hot electrons surrounding the accelerator payload during gun injections bring sufficient charge to the payload to neutralize it provided the loss of charge by secondary production on the payload skin is small. Since the hot population exists for tens of milliseconds after the gun turnoff, it results in driving the payload up to 4 volts negative during this time. Quick echo electrons creating suprathermal electrons around the payload also drive the payload to a few volts negative.

Arnoldy, R. L.↗