Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dimensional analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Aerodynamic optimization, comparison, and trim design of canard and conventional high performance general aviation configurations

A design study has been conducted to optimize trim cruise flight of high performance general aviation canard aircraft which achieve minimum drag. In order to investigate the advantages and disadvantages of canard configured aircraft, corresponding conventional tail-aft 'baseline' aircraft were designed and used for comparison. Two-dimensional predictions were obtained by coupling inviscid results from a vortex panel multi-element program to a momentum integral boundary layer analysis. Using the results of the two-dimensional vortex panel analysis, a vortex lattice method was employed to predict the finite wing results. The analysis utilized a turbulent airfoil and a natural laminar airfoil which are two NASA state-of-the-art airfoil sections. The canard aircraft designs give quantitative results of wing and canard loadings, wing-to-canard moment arm ratios, and aspect ratio effects for trim cruise flight for a wide range of wing-to-canard area ratios. Both canard and baseline aircraft achieved a 25 to 30 percent improvement in performance over typical current technology aircraft, but high canard loading necessary for trim resulted in slightly poorer performance of the canard aircraft as compared to the baseline designs.

Keith, M. W.↗
NASA NTRS1987

Space shuttle main engine high pressure fuel pump aft platform seal cavity flow analysis

A general purpose, three-dimensional computational fluid dynamics code named PHOENICS, developed by CHAM Inc., is used to model the flow in the aft-platform seal cavity in the high pressure fuel pump of the space shuttle main engine. The model is used to predict the temperatures, velocities, and pressures in the cavity for six different sets of boundary conditions. The results are presented as input for further analysis of two known problems in the region, specifically: erratic pressures and temperatures in the adjacent coolant liner cavity and cracks in the blade shanks near the outer diameter of the aft-platform seal.

Lowry, S. A.↗
NASA NTRS1983

Aeroelastic loads prediction for an arrow wing. Task 3: Evaluation of the Boeing three-dimensional leading-edge vortex code

Two separated flow computer programs and a semiempirical method for incorporating the experimentally measured separated flow effects into a linear aeroelastic analysis were evaluated. The three dimensional leading edge vortex (LEV) code is evaluated. This code is an improved panel method for three dimensional inviscid flow over a wing with leading edge vortex separation. The governing equations are the linear flow differential equation with nonlinear boundary conditions. The solution is iterative; the position as well as the strength of the vortex is determined. Cases for both full and partial span vortices were executed. The predicted pressures are good and adequately reflect changes in configuration.

Manro, M. E.↗
NASA NTRS1973

Separation of variables in the special diagonal Hamilton-Jacobi equation: Application to the dynamical problem of a particle constrained on a moving surface

For a time-dependent, n-dimensional, special diagonal Hamilton-Jacobi equation a necessary and sufficient condition for the separation of variables to yield a complete integral of the form was established by specifying the admissible forms in terms of arbitrary functions. A complete integral was then expressed in terms of these arbitrary functions and also the n irreducible constants. As an application of the results obtained for the two-dimensional Hamilton-Jacobi equation, analysis was made for a comparatively wide class of dynamical problems involving a particle moving in Euclidean three-dimensional space under the action of external forces but constrained on a moving surface. All the possible cases in which this equation had a complete integral of the form were obtained and these are tubulated for reference.

Blanchard, D. L.↗
NASA NTRS1983

A Computer Program for the Calculation of Three-Dimensional Transonic Nacelle/Inlet Flowfields

A highly efficient computer analysis was developed for predicting transonic nacelle/inlet flowfields. This algorithm can compute the three dimensional transonic flowfield about axisymmetric (or asymmetric) nacelle/inlet configurations at zero or nonzero incidence. The flowfield is determined by solving the full-potential equation in conservative form on a body-fitted curvilinear computational mesh. The difference equations are solved using the AF2 approximate factorization scheme. This report presents a discussion of the computational methods used to both generate the body-fitted curvilinear mesh and to obtain the inviscid flow solution. Computed results and correlations with existing methods and experiment are presented. Also presented are discussions on the organization of the grid generation (NGRIDA) computer program and the flow solution (NACELLE) computer program, descriptions of the respective subroutines, definitions of the required input parameters for both algorithms, a brief discussion on interpretation of the output, and sample cases to illustrate application of the analysis.

Vadyak, J.↗
NASA NTRS1972

Quasi-one-dimensional compressible flow across face seals and narrow slots. 1: Analysis

An analysis is presented for compressible fluid flow across shaft face seals and narrow slots. The analysis includes fluid inertia, viscous friction, and entrance losses. Subsonic and choked flow conditions can be predicted and analyzed. The model is valid for both laminar and turbulent flows. Results agree with experiment and with solutions which are more limited in applicability. Results show that a parallel film can have a positive film stiffness under choked flow conditions.

Zuk, J.↗
NASA NTRS1971

Unsteady flow through compressor stages

The application of the nonsteady Lax-Wendroff technique to problems with asymptotically periodic solution which offers a potentially powerful method for the investigation of the interaction of rotating and stationary blade rows in turbomachinery is reported. A technique for specifying boundary conditions with phase lag was developed to accomplish this. A complete nonlinear analysis is carried out numerically to determine the entire flow field without recourse to the assumption of small disturbances of linear equations which underlie the previous acoustic theories. The result, obtained for the case of equal number of rotor and stator blades shows that transonic flow can be handled without difficulty. In addition, the program is not limited with regard to blade thickness, camber or loading. Extension of this method to incorporate viscous wakes and to analysis of fully three dimensional configuration is feasible, and would greatly expand its utility in practical applications.

Alzner, E.↗
NASA NTRS1971

Development of boron-epoxy tubular struts for a one-third scale shuttle booster thrust structure.

A one-third scale booster thrust truss structure was designed by Grumman under an in-house program using both boron/epoxy and titanium for the tubular strut members. The boron/epoxy design showed a 22% weight saving and a two phase demonstration program was subsequently funded by NASA-MSFC. In the first phase, structural elements and the most highly loaded center member of the truss were fabricated and tested. The second phase consists of fabrication and test of a complete two-dimensional truss. The design, analysis, fabrication and test procedures are discussed in this paper which also includes the results of successful tests on the elements and center member conducted under the first phase of the NASA program.

Engler, E.↗
NASA NTRS1974

Analysis of thermal stresses and metal movement during welding. I - Analytical study

This is the first part of a study of thermal stresses and metal movement during welding. This part discusses analysis of two-dimensional thermal stresses and metal movement during bead-on-plate and butt welding. A finite-element formulation has been derived, based on the variational principle. The formulation includes temperature dependence of material properties as well as the yield criterion.

Muraki, T.↗