Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coordination state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Effect of curvature on stationary crossflow instability of a three-dimensional boundary layer

An incompressible three-dimensional laminar boundary-layer flow over a swept wing is used as a model to study both the wall-curvature and streamline-curvature effects on the stationary crossflow instability. The basic state is obtained by solving the full Navier-Stokes (N-S) equations numerically. The linear disturbance equations are cast on a fixed, body-intrinsic, curvilinear coordinate system. Those nonparallel terms which contribute mainly to the streamline-curvature effect are retained in the formulation of the disturbance equations and approximated by their local finite difference values. The resulting eigenvalue problem is solved by a Chebyshev collocation method. The present results indicate that the convex wall curvature has a stabilizing effect, whereas the streamline curvature has a destabilizing effect. A validation of these effects with an N-S solution for the linear disturbance flow is provided.

Lin, Ray-Sing↗
NASA NTRS1998

Multiwavelength Observations of a Dramatic High-Energy Flare in the Blazar 3C 279

The blazar 3C 279, one of the brightest identified extragalactic objects in the gamma-ray sky, underwent a large (factor of approximately 10 in amplitude) flare in gamma-rays toward the end of a 3 week pointing by Compton Gamma Ray Observatory (CGRO), in 1996 January-February. The flare peak represents the highest gamma-ray intensity ever recorded for this object. During the high state, extremely rapid gamma-ray variability was seen, including an increase of a factor of 2.6 in approximately 8 hr, which strengthens the case for relativistic beaming. Coordinated multifrequency observations were carried out with Rossi X-Ray Timing Explorer (RXTE), Advanced Satellite for Cosmology and Astrophysics (ASCA; or, Astro-D), Roentgen Satellite (ROSAT), and International Ultraviolet Explorer (IUE) and from many ground-based observatories, covering most accessible wavelengths. The well-sampled, simultaneous RXTE light curve shows an outburst of lower amplitude (factor of approximately = 3) well correlated with the gamma-ray flare without any lag larger than the temporal resolution of approximately 1 day. The optical-UV light curves, which are not well sampled during the high-energy flare, exhibit more modest variations (factor of approximately 2) and a lower degree of correlation. The flux at millimetric wavelengths was near a historical maximum during the gamma-ray flare peak, and there is a suggestion of a correlated decay. We present simultaneous spectral energy distributions of 3C 279 prior to and near to the flare peak. The gamma-rays vary by more than the square of the observed IR-optical flux change, which poses some problems for specific blazar emission models. The synchrotron self-Compton (SSC) model would require that the largest synchrotron variability occurred in the mostly unobserved submillimeter/far-infrared region. Alternatively, a large variation in the external photon field could occur over a time-scale of a few days. This occurs naturally in the "mirror" model wherein the flaring region in the jet photoionizes nearby broad emission line clouds, which, in turn, provide soft external photons that are Comptonized to gamma-ray energies.

Wehrle, A. E.↗
NASA NTRS1998

Multiwavelength Observations of a Dramatic High-Energy Flare in the Blazar 3C 279

The blazar 3C 279, one of the brightest identified extragalactic objects in the gamma-ray sky, underwent a large (factor of approx. 10 in amplitude) flare in gamma-rays toward the end of a 3 week pointing by Compton Gamma Ray Observatory (CGRO), in 1996 January-February. The flare peak represents the highest gamma-ray intensity ever recorded for this object. During the high state, extremely rapid gamma-ray variability was seen, including an increase of a factor of 2.6 in approx. 8 hrs., which strengthens the case for relativistic beaming. Coordinated multifrequency observations were carried out with Rossi X-Ray Timing Explorer (RXTE), Advanced Satellite for Cosmology and Astrophysics (ASCA; or, Astro-D), Roentgen Satellite (ROSAT), and International Ultraviolet Explorer (IUE) and from many ground-based observatories, covering most accessible wavelengths. The well-sampled, simultaneous RXTE light curve shows an outburst of lower amplitude (factor of approx. or equal to 3) well correlated with the gamma-ray flare without any lag larger than the temporal resolution of approx. 1 day. The optical-UV light curves, which are not well sampled during the high-energy flare, exhibit more modest variations (factor of approx. 2) and a lower degree of correlation. The flux at millimetric wavelengths was near a historical maximum during the gamma-ray flare peak, and there is a suggestion of a correlated decay. We present simultaneous spectral energy distributions of 3C 279 prior to and near to the flare peak. The gamma-rays vary by more than the square of the observed IR-optical flux change, which poses some problems for specific blazar emission models. The synchrotron self-Compton (SSC) model would require that the largest synchrotron variability occurred in the mostly unobserved submillimeter/far-infrared region. Alternatively, a large variation in the external photon field could occur over a time scale of a few days. This occurs naturally in the "mirror" model wherein the flaring region in the jet photoionizes nearby broad emission line clouds, which, in turn, provide soft external photons that are Comptonized to gamma-ray energies.

Wehrle, A. E.↗
NASA NTRS2002

Automated Escape Guidance Algorithms for An Escape Vehicle

An escape vehicle was designed to provide an emergency evacuation for crew members living on a space station. For maximum escape capability, the escape vehicle needs to have the ability to safely evacuate a station in a contingency scenario such as an uncontrolled (e.g., tumbling) station. This emergency escape sequence will typically be divided into three events: The fust separation event (SEP1), the navigation reconstruction event, and the second separation event (SEP2). SEP1 is responsible for taking the spacecraft from its docking port to a distance greater than the maximum radius of the rotating station. The navigation reconstruction event takes place prior to the SEP2 event and establishes the orbital state to within the tolerance limits necessary for SEP2. The SEP2 event calculates and performs an avoidance burn to prevent station recontact during the next several orbits. This paper presents the tools and results for the whole separation sequence with an emphasis on the two separation events. The fust challenge includes collision avoidance during the escape sequence while the station is in an uncontrolled rotational state, with rotation rates of up to 2 degrees per second. The task of avoiding a collision may require the use of the Vehicle's de-orbit propulsion system for maximum thrust and minimum dwell time within the vicinity of the station vicinity. The thrust of the propulsion system is in a single direction, and can be controlled only by the attitude of the spacecraft. Escape algorithms based on a look-up table or analytical guidance can be implemented since the rotation rate and the angular momentum vector can be sensed onboard and a-priori knowledge of the position and relative orientation are available. In addition, crew intervention has been provided for in the event of unforeseen obstacles in the escape path. The purpose of the SEP2 burn is to avoid re-contact with the station over an extended period of time. Performing this maneuver properly requires knowledge of the orbital state, which is obtained during the navigation state reconstruction event. Since the direction of the delta-v of the SEPI maneuver is a random variable with respect to the Local Vertical Local Horizontal (LVLH) coordinate system, calculating the required SEP2 burn is a challenge. This problem was solved using a neural network as a model-free function approximation technique.

Flanary, Ronald↗
NASA NTRS2012

Did Geomagnetic Activity Challenge Electric Power Reliability During Solar Cycle 23? Evidence from the PJM Regional Transmission Organization in North America

During solar cycle 22, a very intense geomagnetic storm on 13 March 1989 contributed to the collapse of the Hydro-Quebec power system in Canada. This event clearly demonstrated that geomagnetic storms have the potential to lead to blackouts. This paper addresses whether geomagnetic activity challenged power system reliability during solar cycle 23. Operations by PJM Interconnection, LLC (hereafter PJM), a regional transmission organization in North America, are examined over the period 1 April 2002 through 30 April 2004. During this time PJM coordinated the movement of wholesale electricity in all or parts of Delaware, Maryland, New Jersey, Ohio, Pennsylvania, Virginia, West Virginia, and the District of Columbia in the United States. We examine the relationship between a proxy of geomagnetically induced currents (GICs) and a metric of challenged reliability. In this study, GICs are proxied using magnetometer data from a geomagnetic observatory located just outside the PJM control area. The metric of challenged reliability is the incidence of out-of-economic-merit order dispatching due to adverse reactive power conditions. The statistical methods employed make it possible to disentangle the effects of GICs on power system operations from purely terrestrial factors. The results of the analysis indicate that geomagnetic activity can significantly increase the likelihood that the system operator will dispatch generating units based on system stability considerations rather than economic merit.

storms↗
NASA NTRS2015

Integrated Assessments of the Impact of Climate Change on Agriculture: An Overview of AgMIP Regional Research in South Asia

South Asia encompasses a wide and highly varied geographic region, and includes climate zones ranging from the mountainous Himalayan territory to the tropical lowland and coastal zones along alluvial floodplains. The region's climate is dominated by a monsoonal circulation that heralds the arrival of seasonal rainfall, upon which much of the regional agriculture relies. The spatial and temporal distribution of this rainfall is, however, not uniform over the region. Northern South Asia, central India, and the west coast receive much of their rainfall during the southwest monsoon season, between June and September. These rains partly result from the moisture transport accompanying the monsoonal winds, which move in the southwesterly direction from the equatorial Indian Ocean. Regions further south, such as south/southeast India and Sri Lanka, may receive rains from both the southwest monsoon, and also during the northeast monsoon season between October and December (with northeasterly monsoon wind flow and moisture flux), which results in a bi- or multi-modal rainfall distribution. In addition, rainfall across South Asia displays a large amount of intraseasonal and interannual variability. Interannual variability is influenced by many drivers, both natural (e.g., El Ni-Southern Oscillation; ENSO) and man-made (e.g., rising temperatures due to increasing greenhouse gas concentrations), and it is challenging to obtaining accurate time-series of annual rainfall, even amongst various observed data products, which display inconsistencies amongst themselves. These climatic and rainfall variations can further complicate South Asia's agricultural and water management. Agriculture employs at least 65 of the workforce in most South Asian countries, and nearly 80 of South Asia's poor inhabit rural areas. Understanding the response of current agricultural production to climate variability and future climate change is of utmost importance in securing food and livelihoods for South Asia's growing population. In order to assess the future of food and livelihood security across South Asia, the Agricultural Model Intercomparison and Improvement Project (AgMIP) has undertaken integrated climate-crop-economic assessments of the impact of climate change on food security and poverty in South Asia, encompassing Bangladesh, India, Nepal, Pakistan, and Sri Lanka. AgMIP has funded, on a competitive basis, four South Asian regional research teams (RRTs) and one South Asian coordination team (CT) to undertake climate-crop-economic integrated assessments of food security for many districts in each of these countries, with the goal of characterizing the state of food security and poverty across the region, and projecting how these are subject to change under future climate change conditions.

mountains↗
NASA NTRS2017

High-order Accurate Finite-Volume Formulations for the Pressure Gradient Force in Layered Ocean Models

Discretisation of the horizontal pressure gradient force in layered ocean models is a challenging task, with non-trivial interactions between the thermodynamics of the fluid and the geometry of the layers often leading to numerical difficulties. We present two new finite-volume schemes for the pressure gradient operator designed to address these issues. In each case, the horizontal acceleration is computed as an integration of the contact pressure force that acts along the perimeter of an associated momentum control-volume. A pair of new schemes are developed by exploring different control-volume geometries. Non-linearities in the underlying equation-of-state definitions and thermodynamic profiles are treated using a high-order accurate numerical integration framework, designed to preserve hydrostatic balance in a non-linear manner. Numerical experiments show that the new methods achieve high levels of consistency, maintaining hydrostatic and thermobaric equilibrium in the presence of strongly-sloping layer geometries, non-linear equations-of-state and non-uniform vertical stratification profiles. These results suggest that the new pressure gradient formulations may be appropriate for general circulation models that employ hybrid vertical coordinates andor terrain-following representations.

pressure gradient force↗
NASA NTRSDate not supplied

Estimation With Range Depended Sensor Model

This paper focuses on the improvement of object detection accuracy taking into account the sensor’s reading degradation as the relative range increases. The approach is based on the assumption that range measurement error depends on the actual range. Specifically, we model the measurement error as a proportional to the actual range term plus a zero-mean, Gaussian distributed, and uncorrelated process. The tracking problem is considered in a mixed continuous-discrete time domain, where the target dynamics is in continuous-time and the measurements are in discrete-time, which is an optimal choice in many tracking and navigation applications. We adopt a commonly used continuous time coordinate-uncoupled white-noise acceleration model for a point object to describe the target motion, and use Extended Kalman Filter (EKF) framework to estimate the target's state and the unknown proportionality coefficient.

Vahram Stepanyan↗
NASA NTRSDate not supplied

Complementarities of GEO and LEO IR Sounders for Numerical Weather Prediction in an OSSE Framework

Preparations are underway for the United States’ weather satellite program and the expected advancements in the coming decade. Among these changes is the launch of the proposed NOAA/NASA Geostationary eXtended Observations (GeoXO) Sounder (GXS), coordinated with international counterparts, to form a global ring of hyperspectral infrared (IR) sounders. Coincident with the progress of IR sounders from GEO platforms, the future of low Earth orbit (LEO) sounders is being re-envisioned after decades of beneficial impact in numerical weather prediction (NWP) systems. To address questions about the utility of the two platform types in concert, the Global Modeling and Assimilation Office (GMAO) Observing System Simulation Experiment (OSSE) framework was used to examine the roles of GEO and LEO sounders and their impact on forecast error reduction. Overall, inclusion of both types of platforms in the satellite program produces the largest forecast error reduction with LEO sounders having a strong impact on global skill and GEO sounders providing the most benefit on the scale of targeted regions.

Erica McGrath-Spangler↗
DOE OSTI2020

Ten-Year Review of US/German Collaboration in Salt Repository Research - 20069

A multinational collaboration on salt repository research, design and operation has enjoyed remarkable success since reinvigorating efforts in 2010. Nations now engaged in the shared salt repository research agenda include Germany, the United States, the United Kingdom, the Netherlands, and Poland. The scientific basis for safe and permanent disposal of nuclear waste in salt formations has been strengthened by annual workshops that recognize and address contemporary research, including breakout sessions to stimulate open discussion and focus planning for ongoing investigations. Collaboration not only identifies pertinent technical issues, but facilitates timely, expert, and cost-effective consideration. Contemporary workshops have been held annually since 2010 and are documented in yearly state-of-the-art Proceedings, which summarize content and conclusions. The Proceedings help preserve scientific understanding and provide timely source references. These workshops often produce valuable joint publications coordinated with the Nuclear Energy Agency and other suitable external forums for dissemination. Nuclear waste management programs face growing challenges, while permanent disposal in salt formations provides a robust, safe option for several nations. Workshop format and publications provide a cost-effective insurance against loss of scientific expertise and institutional memory. This paper summarizes ten US/German workshops since formal reinitiation, reexamines key technical issues, discusses the evolving research agenda, and highlights successes and challenges. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

The National Climate Data Base (NCDB): A Bias-Corrected High-Resolution Climate Dataset

Assessing renewable energy resources under future climate scenarios has been highlighted in recent years to analyze and understand potential impacts of future change in renewable generation on the power sector. Solar energy is well-known as the most plentiful among various renewable resources and usually converted to electricity using photovoltaics (PV) technologies, and the global deployment of PV technology has increased rapidly in recent decades. In this study, we develop a statistical technique to downscale the future projection of solar irradiance for PV energy-related applications. A set of Regional Climate Model (RCM)-based projections obtained from the North American Coordinated Regional Climate Downscaling Experiment (NA-CORDEX) are used as inputs to statistical methods to generate high-resolution global horizontal irradiance (GHI) over the contiguous United States (CONUS). The main steps of the statistical downscaling method include (1) regridding RCM output (0.22 degree and daily resolutions) to handle the modeled-observed data sets on a common grid, (2) correcting bias of RCM GHI using satellite-derived observation, and (3) implementing temporal and spatial downscaling to generate GHI at 8-km and hourly resolution. Basically, complex physical processes and interactions between solar radiation and various atmospheric constituents lead solar irradiance to be highly variable and uncertain. Underrepresentation of clouds from the RCM parameterizations is the main source of error and uncertainty in modeling solar irradiance. Thus, we adapt and use the high-quality satellite-derived data from the National Solar Radiation Database (NSRDB) to analyze the bias and error of RCM GHI as well as estimate the statistical parameters for spatial and temporal downscaling. This presentation will summarize the comprehensive analysis conducted to produce and assess the results under two climate scenarios (RCP4.5 and RCP8.5). We will also present a detailed validation demonstrating the strengths of the proposed downscaling method and future extension of this research.

climate data↗
DOE OSTI2024

The National Climate Database (NCDB): An Unbiased 100-Year Dataset for PV Modeling

In this study, we develop a statistical technique to downscale the future projection of solar irradiance for photovoltaics (PV) energy-related applications. A set of Regional Climate Model (RCM)-based projections obtained from the North American Coordinated Regional Climate Downscaling Experiment (NA-CORDEX) are used as inputs to statistical methods to generate high-resolution global horizontal irradiance (GHI) over the contiguous United States (CONUS). The main steps of the statistical downscaling method include (1) regridding RCM output (0.22 degree and daily resolutions) to handle the modeled-observed data sets on a common grid, (2) correcting bias of RCM GHI using satellite-derived observation, and (3) implementing temporal and spatial downscaling to generate GHI at 8-km and hourly resolution. Basically, complex physical processes and interactions between solar radiation and various atmospheric constituents lead solar irradiance to be highly variable and uncertain. Underrepresentation of clouds from the RCM parameterizations is the main source of error and uncertainty in modeling solar irradiance. Thus, we adapt and use the high-quality satellite-derived data from the National Solar Radiation Database (NSRDB) to analyze the bias and error of RCM GHI as well as estimate the statistical parameters for spatial and temporal downscaling. This presentation will summarize the comprehensive analysis conducted to produce and assess the results under two climate scenarios (RCP4.5 and RCP8.5). We will also present a detailed validation demonstrating the strengths of the downscaling method, a summary of the 100-year dataset from 2001-2100, and future extension of this research.

bias correction↗
NASA NTRS2002

Software for Viewing Landsat Mosaic Images

A Windows-based computer program has been written to enable novice users (especially educators and students) to view images of large areas of the Earth (e.g., the continental United States) generated from image data acquired in the Landsat observations performed circa the year 1990. The large-area images are constructed as mosaics from the original Landsat images, which were acquired in several wavelength bands and each of which spans an area (in effect, one tile of a mosaic) of 5 in latitude by approximately equal to 6 degrees in longitude. Whereas the original Landsat data are registered on a universal transverse Mercator (UTM) grid, the program converts the UTM coordinates of a mouse pointer in the image to latitude and longitude, which are continuously updated and displayed as the pointer is moved. The mosaic image currently on display can be exported as a Windows bit-map file. Other images (e.g., of state boundaries or interstate highways) can be overlaid on Landsat mosaics. The program interacts with the user via standard toolbar, keyboard, and mouse user interfaces. The program is supplied on a compact disk along with tutorial and educational information.

Watts, Jack↗
DOE OSTI2026

Distinct Kinetic Signatures of Photodesorption from Metal Nanoparticles

Visible photon fluxes can influence the rate and selectivity of heterogeneously catalyzed reactions on metal nanoparticle surfaces. Models describing the influence of photon fluxes have typically introduced photon flux dependent apparent thermal kinetic parameters (reaction orders, activation energies, binding energies, etc.). This has relied on empirical fitting of reaction rate data, making mechanistic interpretations of how photon fluxes influence elementary step rates challenging and inconsistent with fundamental descriptions of photochemistry on metal surfaces developed from surface science studies. Using the CO adsorption–desorption quasi-equilibrium reaction on Pt/Al 2 O 3 catalysts as a model system, we measured steady state adsorbed CO (CO*) coverages under isothermal and isobaric (1 mbar CO) conditions as a function of temperature (473–573 K) and of 440 nm photon flux ((0.1–5.2) × 10 3 # hv Pt site –1 s –1 ) using in situ IR spectroscopy. Steady state CO* coverage on Pt was photon flux dependent with increasing photon flux causing decreasing coverage, consistent with photons driving CO* desorption rates faster than thermal CO* desorption rates. However, photon flux dependent CO* coverages were essentially temperature independent, inconsistent with models that describe photon effects using perturbations to apparent thermal kinetic parameters. Instead, 120 steady state CO* coverages as a function of temperature and photon flux are quantitatively described by a kinetic model in which the overall desorption rate is a summation of independent thermal and photon induced CO* desorption rates. Site-resolved analysis reveals distinct kinetic parameters for photon driven desorption of CO* from well-coordinated, under-coordinated, and highly under-coordinated Pt sites, with temperature-dependent apparent quantum efficiencies (AQE) consistent with temperature dependence of vibrational quanta distribution of adsorbed CO. The rigorous kinetic rate laws for independent photon and thermal driven pathways allow for predictive modeling of the influence of photon fluxes on the rates of CO* desorption under catalytic conditions. Further, the analysis provides evidence that steady state continuous wave photon fluxes can drive desorption/adsorption reactions on metal surfaces out of thermal equilibrium, reconciling surface science observations of molecular photodesorption with applied catalysis. The work establishes a general kinetic framework to be considered for photon driven processes on metals, and defines catalyst, reaction, and photon flux characteristic design principles for breaking Sabatier limitations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

NSTTF Voucher Program RPPR-1 (Final Report)

Sandia issued a Request for Proposals (RFP) to solicit proposals from industry, academia, research laboratories, government agencies, and individuals on the use of the National Solar Thermal Test Facility (NSTTF) to increase CSP technology market adoption across the United States. The voucher funds will be used to cover the cost of NSTTF test facilities usage and technical staff support for analysis, design and test planning and execution. Sandia will collect submitted proposals, coordinate their review through DOE SETO, and work in partnership or under contract with the applicants to complete the funded research. Through this program, participants will be supported in their use of the world class facilities and expertise available at the NSTTF at Sandia in Albuquerque, NM to accelerate the advancement of CST technologies toward meeting 2030 SETO goals for CSP. The goals of this semi-annual reporting period were to complete all administrative tasks and contracting, begin testing on three of the vouchers, and report on initial findings. The fourth voucher (University of Michigan) is predicated on the results of an ongoing heat exchanger test that is expected to conclude by the end of FY22.

14 SOLAR ENERGY↗
DOE OSTI2026

IM3 Projected US Data Center Locations

IM3 Projected US Data Center Locations This dataset contains model projections of new data center facilities in the contiguous United States (CONUS) through 2035 using the CERF – Data Centers model. Data center locations are modeled across four data center electricity demand growth scenarios (low, moderate, high, higher) and five market gravity scenarios (0%, 25%, 50%, 75%, 100%). Projected locations are intended to be regional representations of feasible siting locations in the future to assess potential grid and water stress impacts. The data center load growth scenarios correspond with the rates outlined in EPRI (2024) and include 3.71%, 5%, 10%, and 15% annual growth of electricity demand for data centers from 2023 values in 37 states across the CONUS. Market gravity scenarios correspond to the relative importance of proximity to data center markets or high population areas compared to locational cost in the siting algorithm. 0% market gravity means that siting decisions were entirely determined by the locational cost in each feasible location. 100% market gravity means that only market proximity was considered when siting. Other scenarios have weight placed on both components where total weight always equals 100%. Locational cost is dependent on facility cooling type and corresponding electricity cost, taxes, and other factors. Facility cooling type is spatially determined where high water stress and/or areas with high summer wet bulb temperatures are assumed to operate with mechanical cooling for a higher fraction of the year rather than evaporative cooling. Feasible data center siting areas are based on geospatial suitability raster data developed with open-source information. The following areas are excluded from siting: Areas within 300 m of a federal airport runway or within an airport area boundary Waterbodies Areas with slope >16% Areas susceptible to sinkholes High coastal or inland flood risk areas Local, state, and federal parks, leisure areas, and cemeteries Areas >2 km away from electric substations Areas >5 km away from a municipal water supplier service area Areas >2 km away from high-speed fiber provider service territory USGS Protected Areas Database of the United States (PAD-US) GAP status 1, 2, or 3 areas US National Parks Wetlands USFWS critical habitats BIA land areas Railroads, major roadways, and minor roadways Military areas and training grounds NLCD developed lands Areas >0.8 km (0.5 miles) from NLCD developed lands Because we use open-source information, proprietary information that can influence siting decisions such as individual tax agreements with cities, detailed fiber line connectivity, electric grid power capacity agreements, and others, are not currently accounted for in the modeling process. Using specific building locations and footprints in the dataset for local planning purposes is not advised. Technical Information Geospatial data is provided in geojson format using the Albers Equal Area Conic (ESRI:102003) coordinate reference system. The datasets contain the following parameters: id - unique identification number within given scenario file growth_scenario – data center demand growth scenario market_gravity_weight – market gravity weight scenario (%) region – name of region (i.e., US State) total_cost_million_usd – locational siting cost ($million) campus_size_square_ft – total land acquired for data center facility (square ft) data_center_it_power_mw – IT power of data center facility (MW) mechanical_cooling_frac – fraction of year when data center uses mechanical cooling system water_cooling_frac– fraction of year when data center uses evaporative cooling system cooling_energy_demand_mwh – total annual facility energy demand for cooling (MWh) cooling_water_demand_mgy – total annual facility water demand for cooling (MG) cooling_water_consumption_mgy – total annual facility water consumed (MG) normalized_locational_cost – normalized total locational cost score for location normalized_gravity_score – normalized market gravity score for location weighted_siting_score – total weighted siting score of locational cost and gravity score geometry – polygon geometry of facility Acknowledgment IM3 is a multi-institutional effort led by Pacific Northwest National Laboratory and supported by the U.S. Department of Energy's Office of Science as part of research in MultiSector Dynamics, Earth and Environmental Systems Modeling Program. License This data is made available under a CCBY4.0 License Disclaimer This material was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor the United States Department of Energy, nor the Contractor, nor any or their employees, nor any jurisdiction or organization that has cooperated in the development of these materials, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness or any information, apparatus, product, software, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof, or Battelle Memorial Institute. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. PACIFIC NORTHWEST NATIONAL LABORATORYoperated byBATTELLEfor theUNITED STATES DEPARTMENT OF ENERGYunder Contract DE-AC05-76RL01830

Mongird, Kendall (ORCID:0000000328077088)↗
DOE OSTI2026

Enhancing the EVI-X National Framework to Address Emerging Energy Questions

This project advances the state-of-the-art in infrastructure analysis to better inform deployment strategies. It enhances NLR's EVI-X Suite, a set of tools supporting national network planning, local site design, and financial evaluation. These capabilities will position DOE to provide timely analysis and inform the strategic buildout of the national charging network. EVI-X development is closely coordinated with other DOE-funded efforts to ensure consistent, integrated use of key inputs and outputs, including EV adoption scenarios from NLR's TEMPO model.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS2005

Solar-System Ephemeris Toolbox

NASA s Jet Propulsion Laboratory (JPL) generates planetary and lunar ephemeris data and FORTRAN routines that allow users to obtain state data for the Sun, the moon, and the planets. The JPL Solar System Ephemeris Toolbox, developed at Kennedy Space Center, is a set of functions that provides the same functionality in the MATLAB computing environment along with some additional capabilities. The toolbox can be used interactively via a graphical user interface (GUI), or individual functions can be called from the MATLAB command prompt or other MATLAB scripts and functions. The toolbox also includes utility functions to define and perform coordinate transformation (e.g., mean-of-date, true-of-date, J2000) that are common in the use of these ephemerides. An attached README file guides the user through the process of constructing binary ephemeris files, verifying correct installation, and using functions to extract state data. This process also can be performed using the GUI. Help from each toolbox function is available through MATLAB s "help" function. Many of the functions in the toolbox are MATLAB equivalents of the JPL-written FORTRAN programs and subroutines used for the same purposes. A novice can use the GUI to extract state data, while a more experienced user can use the functions directly, as needed, in his/her applications. The toolbox has been tested using MATLAB Releases 13 an

Walker, Charles F.↗