Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “content”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Remote sensing of soil moisture content over bare fields at 1.4 GHz frequency

A simple method of estimating moisture content (W) of a bare soil from the observed brightness temperature (T sub B) at 1.4 GHz is discussed. The method is based on a radiative transfer model calculation, which has been successfully used in the past to account for many observational results, with some modifications to take into account the effect of surface roughness. Besides the measured T sub B's, the three additional inputs required by the method are the effective soil thermodynamic temperature, the precise relation between W and the smooth field brightness temperature T sub B and a parameter specifying the surface roughness characteristics. The soil effective temperature can be readily measured and the procedures of estimating surface roughness parameter and obtaining the relation between W and smooth field brightness temperature are discussed in detail. Dual polarized radiometric measurements at an off-nadir incident angle are sufficient to estimate both surface roughness parameter and W, provided that the relation between W and smooth field brightness temperature at the same angle is known. The method of W estimate is demonstrated with two sets of experimental data, one from a controlled field experiment by a mobile tower and the other, from aircraft overflight. The results from both data sets are encouraging when the estimated W's are compared with the acquired ground truth of W's in the top 2 cm layer. An offset between the estimated and the measured W's exists in the results of the analyses, but that can be accounted for by the presently poor knowledge of the relationship between W and smooth field brightness temperature for various types of soils. An approach to quantify this relationship for different soils and thus improve the method of W estimate is suggested.

Wang, J. R.↗

The content of catecholamines in the adrenal glands and sections of the brain under hypokinesia and injection of some neurotropic agents

The dynamics of catecholamine content were studied in the adrenal glands and in various region of the brain of white rats under hypokinesia and injections of neurotropic agents. Profound changes in body catecholamine balance occured as a result of prolonged acute restriction of motor activity. Adrenalin retention increased and noradrenanalin retention decreased in the adrenal glands, hypothalamus, cerebral hemispheres, cerebellum and medulla oblongata. Observed alterations in catecholamine retention varied depending upon the type of neurotropic substance utilized. Mellipramine increased catecholamine retention in the tissues under observation while spasmolytin brought about an increase in adrenalin concentration in the adrenals and a decrease in the brain.

Melnik, B. E.↗

Digital processing of ionospheric electron content data

Ionospheric electron content data contain periodicities that are produced by a diversity of sources including hydromagnetic waves, gravity waves, and lunar tides. Often these periodicities are masked by the strong daily variation in the data. Digital filtering can be used to isolate the weaker components. The filtered data can then be further processed to provide estimates of the source properties. In addition, homomorphic filtering may be used to identify nonlinear interactions in the ionosphere.

Bernhardt, P. A.↗

Identification of frequency components in electron content data by nonlinear filtering

A nonlinear filtering technique, called multiplicative homomorphic signal processing, is used to identify three groups of frequency components in electron content data. The first group of components results from the modulation of solar activity produced by the 27 day solar rotation. The second group is of lunar origin. The lunar frequencies are caused by nonlinear processes which probably occur in the dynamo region. The precise nature of these processes is not fully understood. The third group of frequency components, with a fundamental period of 13.9 days, has an unknown origin.

Bernhardt, P. A.↗

Trace element contents of selected Antarctic meteorites. I - Weathering effects and ALH A77005, A77257, A77278 and A 77299

Data is examined for volatile/mobile Ag, As, Au, Bi, Cd, Co, Cs, Cu, Ga, In, Rb, Sb, Se, Te, Tl and Zn in exterior and/or interior samples of four Antarctic meteorites from the Allan Hills (ALH): A77005 (unique achondrite); A77257 (ureilite); A77278 (L3); A77299 (H3). Exterior samples reflect contamination and/or leaching by weathering but trace element (ppm-ppt) contents in interior samples seem reasonable for representatives of these rare meteoritic types. The A77005 achondrite is shown to be related to shergottites; other samples extend compositional ranges previously known for their groups or types. With suitable precautions, Antarctic meteorite finds yield trace element data as reliable as those obtained from previously known falls.

Biswas, S.↗

Low-Gold-Content Brazing Alloys

Two new alloys for brazing at 1,760 degrees to 1,850 degrees F are stronger and have better gap-filling capability. Alloys have lower gold content than other gold brazes for their temperature range and therefore are far less expensive. They are produced in wire, foil, and powder and are excellent for brazing at temperatures where no suitable alloys existed--especially for step brazing copper.

Brennan, A.↗

Estimating the chlorophyll content in the waters of Guanabara Bay from the LANDSAT multispectral scanning digital data

Detection of water quality in Guanabara Bay using multispectral scanning digital data taken from LANDSAT satellites was examined. To test these processes, an empirical (statistical) approach was choosen to observe the degree of relationship between LANDSAT data and the in situ data taken simultaneously. The linear and nonlinear regression analyses were taken from among those developed by INPE in 1978. Results indicate that the major regression was in the number six MSS band, atmospheric effects, which indicated a correction coefficient of 0.99 and an average error of 6.59 micrograms liter. This error was similar to that obtained in the laboratory. The chlorophyll content was between 0 and 100 micrograms/liter, as taken from the MSS of LANDSAT.

Dejesusparada, N.↗

Measurement of liquid water content in a melting snowpack using cold calorimeter techniques

Liquid water in a snowpack is a quantifiable parameter of hydrological significance. It is also important in the interpretation of snowpack remote sensing data using microwave techniques. One acceptable approach to measuring liquid water content of a snowpack (by weight) is the cold calorimeter. This technique is presented from theory through application. Silicon oil was used successfully as the freezing agent. Consistent results can be obtained even when using operators with a minimum of training. Data can be obtained approximately every 15 minutes by using two calorimeters and three operators. Accuracy within one to two percent can be achieved under reasonable field conditions.

Rango, A.↗

The effect of immobilization and 3 (beta-aminoethyl)-1, 2, 4 triazol on the calcium content in gastric tissues of guinea pigs during the formation of experimental ulcers

A sharp fall in the concentration of calcium in gastric tissues upon immobilization and after administration of the histamine analog was recorded. Similar shifts were seen to occur in the blood plasma as well. This implies that under the effect of different action, tissue dystrophy develops by following a common mechanism involving not only the adenyl cyclase system, but that of calcium ion metabolism as well. The calcium ion content in the blood plasma and gastric tissues were measured by atomic absorption spectrophotometry.

Grechishkin, L. L.↗

Effects of the gaseous and liquid water content of the atmosphere on range delay and Doppler frequency

When high precision is required for range measurement on Earth space paths, it is necessary to correct as accurately as possible for excess range delays due to the dry air, water vapor, and liquid water content of the atmosphere. Calculations based on representative values of atmospheric parameters are useful for illustrating the order of magnitude of the expected delays. Range delay, time delay, and phase delay are simply and directly related. Doppler frequency variations or noise are proportional to the time rate of change of excess range delay. Tropospheric effects were examined as part of an overall consideration of the capability of precision two way ranging and Doppler systems.

Flock, W. L.↗

Galilean satellite eclipse studies. II - Jovian stratospheric and tropospheric aerosol content

Aerosol profiles of the Jovian stratosphere and troposphere are presented using the Galilean satellite eclipse technique. The aerosol content is tenuous and varies with altitude, increasing rapidly with downward passage through the tropopause. The data indicate the presence of some aerosols of undetermined structure above the tropopause. An extended haze distribution is proposed, but the possibility that the stratospheric aerosol resides in a thin layer is not excluded.

Smith, D. W.↗

Preflow stresses in Martian rampart ejecta blankets - A means of estimating the water content

Measurements of extents of rampart ejecta deposits as a function of the size of the parent craters support models which, for craters larger than about 6 km diameter, constrain ejecta blankets to all have a similar maximum thickness regardless of the crater size. These volatile-rich ejecta blankets may have failed under their own weights, then flowed radially outward. Assuming this to be so, some of the physicomechanical properties of the ejecta deposits at the time of their emplacement can then be determined. Finite-element studies of the stress magnitudes, distributions, and directions in hypothetical Martian rampart ejecta blankets reveal that the material most likely failed when the shear stresses were less than 500 kPa and the angle of internal friction was between 26 and 36 deg. These figures imply that the ejecta has a water content between 16 and 72%. Whether the upper limit or the lower limit is more appropriate depends on the mode of failure which one presumes: namely, viscous flow of plastic deformation.

Woronow, A.↗

Requirements of space-borne microwave radiometers for detecting soil moisture contents

A multilayer radiative transfer model for predicting the relationship between soil moisture content and microwave emission is summarized. Attention is also given to the performance of various microwave sensors for soil moisture retrieval; here, the requirements of a satellite sensor system for monitoring large-scale soil moisture conditions are discussed. These requirements are presented in terms of (1) the wavelength, (2) atmospheric contamination, (3) polarization, (4) frequency of observation, and (5) spatial resolution. Each parameter is discussed in terms of microwave response. Previous aircraft data with extensive ground truth information are used to support the theories proposed. Trade-offs between the parameters and an optimum sensor system for space monitoring soil moisture information are discussed.

Burke, H.-H. K.↗

A multi-frequency radiometric measurement of soil moisture content over bare and vegetated fields

A USDA Beltsville Agricultural Research Center site was used for an experiment in which soil moisture remote sensing over bare, grass, and alfalfa fields was conducted over a three-month period using 0.6 GHz, 1.4 GHz, and 10.6 GHz Dicke-type microwave radiometers mounted on mobile towers. Ground truth soil moisture content and ambient air and sil temperatures were obtained concurrently with the radiometric measurements. Biomass of the vegetation cover was sampled about once a week. Soil density for each of the three fields was measured several times during the course of the experiment. Results of the radiometric masurements confirm the frequency dependence of moisture sensing sensitivity reduction reported earlier. Observations over the bare, wet field show that the measured brightness temperature is lowest at 5.0 GHz and highest of 0.6 GHz frequency, a result contrary to expectation based on the estimated dielectric permittivity of soil water mixtures and current radiative transfer model in that frequency range.

Wang, J. R.↗

Effects of varying soil moisture contents and vegetation canopies on microwave emissions

Results of NASA airborne passive microwave scans of bare and vegetated fields for comparison with ground truth tests are discussed and a model for atmospheric scattering of radiation by vegetation is detailed. On-board radiometers obtained data at 21, 2.8, and 1.67 cm during three passes over each of 46 fields, 28 of which were bare and the others having wheat or alfalfa. Ground-based sampling included moisture in five layers down to 15 cm in addition to soil temperature. The relationships among the brightness temperature and soil moisture, as well as the surface roughness and the vegetation canopy were examined. A model was developed for the dielectric coefficient and volume scattering for a vegetation medium. L- to C-band data were found useful for retrieving soil information directly. A surface moisture content of 5-35% yielded an emissivity of 0.9-0.7. The data agreed well with a combined multilayer radiative transfer model with simple roughness correction.

Burke, H.-H. K.↗

Preparation of low strategic metal content superalloys

The properties of modified NIMONIC 115 and UDIMET 720 with reduced levels of cobalt were evaluated. Vacuum induction melted and vacuum arc remelted ingots were hot rolled to 3/4 inch diameter bar. Hot workability was evaluated in terms of the ingot rolling behavior and the hot ductility of the as-rolled bar. Variations in workability and bar ductility were correlated to variations in incipient melting temperature and gamma prime solvus, both of which varied with cobalt content. Heat treatments were defined to yield, as far as possible, similar structures from alloy to alloy. At the lowest cobalt levels N-115 workability was severely limited and the alloys could not be worked to bar. It is suggested that incipient melting in combination with heavy grain boundary carbide precipitation reduced ingot workability. Final heat treatment of modified alloys was difficult in the situation where the gamma prime solvus temperature was close to the incipient melting point, indicating that it may not be feasible to fully solution low cobalt alloys to obtain the large grain size required for optimum creep resistance.

Sczerzenie, F. E.↗

SiC or B4C-B/low strategic element content composite

Advancements in materials technologies are needed to provide the aerospace industry with alternate material options in the event of future strategic metal shortages and to optimize performance of engines. Composite materials are promising candidates for such an application. The potential of SiC and B4C-B filament reinforced low strategic element iron-base alloy content composites or use at 760 to 870 C is considered. A limiting factor towards developing this material for high temperature use has been the reaction between the filament and matrix material during fabrication and service which degrades filament strength. A low temperature fabrication process to limit filament/matrix reaction is being developed which involves the use of hollow cathode sputtering to coat the filaments with iron-base alloys of various compositions. An investigation is being conducted to determine the interfacial reaction effects of SiC and B4C-B filaments with iron-base alloys to develop an understanding of filament/matrix alloy compatibility for 760 to 870 C service.

Petrasek, D. W.↗

Information content of data from the LANDSAT-4 Thematic Mapper (TM) and Multispectral Scanner (MSS)

Software was constructed to reformat data to band interlevel format and analysis software was developed in an effort to quantify the increased information content (statistical variability within a data set) of thematic mapper data as compared to that from the LANDSAT 4 multispectral band scanner. Computer runs were carried out for several subareas from a data set acquired simultaneously by TM and MSS over a test area in northeast Arkansas, one of the most agriculturally diverse sea areas in the country. The 6 visible-near IR channels of the TM provide more information than the 4 channels of the MSS. A rough estimate of 20 bits per pixel for TM, and 10 bits per pixel for the MSS was computed for these subareas. These numbers are to be revised downward when allowance is made for noise in the data.

Price, J. C.↗