Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Coal-derived conductive pavement for winter de-icing: prototype, modeling, and simulation

Existing pavement de-icing methods result in high installation and maintenance costs, traffic delays, excessive weariness and corrosion, and negative environmental and safety impacts. To overcome these challenges, this paper presents an innovative pathway to designing and constructing smart self-heating pavements using a low-cost coal-char bearing asphalt material. The conductive asphalt incorporates coal char, i.e., a key byproduct of the coal pyrolysis process, into the Stone Mastic Asphalt (SMA) mixture. This asphalt containing coal-derived solid carbon exhibits highly tailorable electrical conductivity, satisfactory mechanical and thermophysical properties, and superior cost-efficiency as compared to other conductive pavement materials. The de-icing performance was also demonstrated by laboratory experiments on a bench-scale prototype. Furthermore, an efficient thermal network model was developed and validated by experiments to investigate the transient thermal behavior and energy performance of the Ohmic heating pavement system. Furthermore, the whole-year energy simulation case studies were conducted on a bridge pavement with an annual energy use of 24.6–1444.8 kWh/m 2 , showcasing its potential in field applications across cool humid, cold humid, and subarctic/arctic climate zones.

42 ENGINEERING↗

Thermal conductivity of cement paste: Influence of macro-porosity

Thermal conductivity of cement paste is significantly influenced by the presence of macro-pores within it. These pores (pores with size greater than 6 μm, measured using microCT) which may be filled with air and/or water significantly alters the thermal conductivity of the resulting material. A combination of experiments, molecular dynamic investigations of major constituents of the cement paste, multiscale homogenization techniques, and inclusion of thermal conductivity of the pores containing either air or water has been utilized in this study to reveal the influence of pores in the calculation of thermal conductivity of the composite material.

36 MATERIALS SCIENCE↗

A machine learning approach to thermal conductivity modeling: A case study on irradiated uranium-molybdenum nuclear fuels

A deep neural network was developed for the purpose of predicting thermal conductivity with a case study performed on irradiated nuclear fuel. Traditional thermal conductivity modeling approaches rely on existing theoretical frameworks that describe known, relevant phenomena that govern the microstructural evolution processes during neutron irradiation (such as recrystallization, and pore size, distribution and morphology). Current empirical modeling approaches, however, do not represent all irradiation test data well. We develop a machine learning approach to thermal conductivity modeling that does not require a priori knowledge of a specific material microstructure and system of interest. Our approach allows re-searchers to probe dependency of thermal conductivity on a variety of reactor operating and material conditions. The purpose of building such a model is to allow for improved predictive capabilities linking structure-property-processing-performance relationships in the system of interest (here, irradiated nuclear fuel), which could lead to improved experimental test planning and characterization. The uranium-molybdenum system is the fuel system studied in this work, and historic irradiation test data is leveraged for model development. Our model achieved a mean absolute percent error of approximately 10%. Results indicate our model generalizes well to never before seen data, and thus use of deep learning methods for material property predictions from limited, historic irradiation data is a viable approach. This work challenges the current paradigm in materials science, where material property models are based on limited experimental data fitted to low-dimensionality phenomenological models, or by simulations in which fundamental equations are explicitly solved. The work presented here aims to demonstrate the potential and limitations of machine learning in the field of materials science and material property modeling.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A novel PEMEC with 3D printed non-conductive bipolar plate for low-cost hydrogen production from water electrolysis

For establishing the large-scale hydrogen production as energy carrier from water electrolysis, improving cost-effectiveness and efficiency remains the main challenges. In this study, we propose a novel proton exchange membrane electrolyzer cell (PEMEC), consisting of non-conductive bipolar plates (BPs) and thin film liquid/gas diffusion layers (TF-LGDLs) to reduce the cost and improve the PEMEC performance. The 3D printed non-conductive BP is manufactured with low-cost polylactic acid (PLA) and is mainly functioned to distribute the water and gas products. A titanium thin film LGDL (TF-LGDL) with surroundings is developed for directly transporting electrons from the external power sources, which changes the electron transport path in the PEMECs. The PLA BP exhibits an extremely low cost (1/10 of that of the graphite BP), and the hydrogen production rate per unit BP cost in a PEMEC with PLA BP, is almost 6 times higher than a conventional one with graphite BPs. More importantly, the PEMECs with PLA BPs can achieve a good electrochemical performance of 2.21 V at 1 A/cm 2 under room temperature. A model is also developed to investigate the impact of the BP resistivity of on the cell performance, and a guideline for the selection guideline of conductivity of BPs material is provided. The easily accessible and low-cost PLA BPs coupled with the new electron-conducting path will drive the exploration of plastic materials for economic and efficient water splitting or other energy conversion devices, including fuel cells, batteries, and solar cells.

09 BIOMASS FUELS↗

Anisotropic thermal-conductivity degradation in the phase-field method accounting for crack directionality

Dynamic loads applied to metals may lead to brittle or ductile fracture depending on the imposed strain rates, material properties, and specimen geometry. With an increase in the applied velocity, brittle to ductile failure mode transition may also be observed. Furthermore, at high strain rates, ductile fracture may be preceded by shear bands, which are narrow bands of intense plastic deformation, typically accompanied by a significant rise in temperature. Reliable models are needed to predict the response of metals subject to dynamic loads. In particular, capturing the interplay between heat conduction and crack propagation using the phase-field fracture method is still an open research field. To accurately capture the heat transfer physics across crack surfaces, damage models degrading thermal-conductivity are necessary. While isotropic thermal-conductivity degradation models were proposed, they may lead to errors as they are indifferent to crack directionality. In our current work, a new anisotropic approach is proposed in which thermal-conductivity, which depends on the phase-field gradient, is degraded solely across the crack. Here, it is shown that this approach improves the near-field approximation of temperature and heat flux compared with isotropic degradation, when taking the discontinuous crack solutions as reference. Additionally, the anisotropic degradation approach is implemented in a unified dynamic fracture model and a couple of examples demonstrate the viability of this approach.

42 ENGINEERING↗

Interfacial thermal conductance between multi-layer graphene sheets and solid/liquid octadecane: A molecular dynamics study

Mixtures of paraffin and carbon nanofillers have promising potential for thermal storage, as paraffin (the matrix) possesses high latent heat and the nanofillers compensate for the low thermal conductivity (TC) of paraffin. Understanding thermal transport in these materials is essential for practical applications, as weak thermal transport hinders fast charge/discharge of thermal energy. Here, we use non-equilibrium molecular dynamics (NEMD) simulations to study the interfacial thermal conductance (ITC) between graphene sheets and octadecane (C18H38) matrix under the limiting conditions of the sheets being parallel or perpendicular to the direction of the imposed heat flux. The findings show that the systems containing thin graphene layers exhibit higher values of ITC. This study captures the asymptotic saturation of thermal conductance for the liquid phase of the perpendicular structure. Besides, given the greater number of structured layers of paraffin upon phase change, the ITC for the solid paraffin-graphene system is higher than the conductance of the liquid paraffin-graphene interface. We use the Pearson correlation coefficients of the vibrational power spectrum (VPS) of interfacing materials to explain the orders of magnitude variations of the observed ITC.

25 ENERGY STORAGE↗

Molecular dynamics simulations of energy accommodation between gases and polymers for ultra-low thermal conductivity insulation

Determining the energy accommodation between gases and solids is essential to developing porous thermal insulation materials with ultra-low effective thermal conductivity that reduce energy use, greenhouse gas emissions, and fossil fuel consumption. The energy accommodation coefficients of most gases, however, have been rarely studied, especially with respect to solids that have relatively high thermal resistivity, e.g., polymers. Here, by using all-atom nonequilibrium molecular dynamics simulations, we reveal the accommodation coefficients of He, Ar, N 2 , and O 2 with polymers, mainly polystyrene. We find that their values are around 0.51, 0.72, 0.79, and 0.90, respectively, suggesting a critical reexamination of the commonly used theoretical maximum value of 1. We have also conducted experiments and validated the value for air, which is about 0.81. Such a change in accommodation coefficients can lead to a reduction of about 70%, 50%, 35%, and 20% in the thermal conductivity of He, Ar, N 2 , and O 2 gases in nano pores (below 100 nm) or at low pressures (below 1 millibar). With these new accommodation coefficients, we find that in a 10 nm pore with ambient pressure at 300 K, the gas thermal conductivity of He, Ar, N 2 , and O 2 in porous polystyrene can be as low as 9.7 × 10 –4 , 3.4 × 10 –4 , 7.3 × 10 –4 , and 8.5 × 10 –4 W·m –1 ·K –1 , respectively, which are two to three orders of magnitude lower than their bulk values, promising higher thermal resistivity of insulation materials. This work reveals the fundamental energy exchange between gases and polymers, providing important guidance for designing high-performance thermal insulation materials for various applications.

36 MATERIALS SCIENCE↗

Enhancement of effective thermal conductivity of rGO/Mg nanocomposite packed beds

Engineering thermophysical properties of metal hydrides nanocomposites is crucial for effective thermal management during hydrogen storage reactions; however, the effect of microstructure on thermal transport mechanisms is still unclear. Here, we employed an integrated experiment-modeling approach to investigate microstructural factors that determine the effective thermal conductivity of individual reduced graphene oxide-magnesium (rGO/Mg) nanocomposites and their packed bed. Here the effective thermal conductivity of the rGO/Mg nanocomposite packed bed was measured by using guarded hot-plate method under various atmospheric conditions (i.e., vacuum, Ar and He). A microstructure-aware mesoscopic modeling revealed that anisotropy of the effective thermal conductivity of individual rGO/Mg nanocomposites plays an important role in determining the effective thermal conductivity of their packed bed. The validated mesoscopic model also disclosed a nontrivial interplay between the intrinsic rGO properties and the extrinsic composite structural features. Finally, quantitative sensitivity analysis based on the modeling framework is used to provide practical engineering guidance for controlling the thermal transport within nanocomposite packed beds.

36 MATERIALS SCIENCE↗

Experimental determination of single-crystal halite thermal conductivity, diffusivity and specific heat from -75°C to 300°C

The thermal properties of halite have broad practical importance, from design and long-term modeling of nuclear waste repositories to analysis and performance assessment of underground natural gas, petroleum and air storage facilities. Using a computer-controlled transient plane source method, single-crystal halite thermal conductivity, thermal diffusivity and specific heat were measured from -75°C to 300°C. These measurements reproduce historical high-temperature experiments and extend the lower temperature extreme into cryogenic conditions. Measurements were taken in 25-degree increments from -75°C to 300°C. Over this temperature range, thermal conductivity decreases by a factor of 3.7, from 9.975 to 2.699 W/mK , and thermal diffusivity decreases by a factor of 3.6, from 5.032 to 1.396 mm²/s. Specific heat does not appear to be temperature dependent, remaining near 2.0 MJ/m³K at all temperatures. This work is intended to develop and expand the existing dataset of halite thermal properties, which are of particular value in defining the parameters of salt storage thermophysical models. The work was motivated by a need for thermal conductivity values in a mixture theory model used to determine bulk thermal conductivity of reconsolidating crushed salt.

58 GEOSCIENCES↗

High stability of flexible perovskite transparent conductive oxide film via van der Waals heteroepitaxy

Transparent conducting oxides (TCOs), such as indium-tin oxide (ITO) and indium gallium zinc oxide (IGZO), are essential components in the design of flexible optoelectronic devices. However, it is still a challenge to prepare low-cost flexible transparent conductive film for achieving the flexible functionality together with high optical transparency and electrical conductivity. Herein, fluorphlogopite (mica) is selected as the bendable and transparent substrate for the fabrication of low-cost perovskite CaVO 3 TCO epitaxial film. Benefitting from thin mica substrate with high Young’s modulus of 200 GPa, flexible CaVO 3 TCO epitaxial film exhibits high mechanical stability in terms of electrical conductivity and optical transparency after bending up to 10 5 cycles. The change of resistance can reflect the bending curvature and strain state. Finally, our results provide a new pathway to design superior mechanical flexibility and stability CaVO 3 TCO films for application in flexible, light-weight, and portable smart optoelectronic devices.

36 MATERIALS SCIENCE↗

Macro copper-graphene composites with enhanced electrical conductivity

Composites demonstrating simultaneously enhanced-electrical conductivity, current density and lowered-temperature coefficient of resistance (TCR) compared to copper have been highly sought after for their advantages in efficient energy transport behavior. While such conductors have been demonstrated in 1D (nanowires) and 2D (films) samples, achieving similar behavior in 3D has been challenging owing to the limitations of the synthesis techniques used. In this paper, novel macro-scale 3D copper conductors were demonstrated with simultaneously increased electrical conductivity and decreased temperature coefficient of resistance (TCR) through the addition of graphene. Hot-extrusion was used to manufacture over 1-m-long, 2-mm-diameter copper-graphene composites with varying graphene content and defect density. Results showed that the electrical conductivity and current density in composites with low defect density graphene increased monotonically as a function of graphene content. They also demonstrated a significant decrease of over 17% in TCR with the addition of only 15 ppm graphene along with over 52% improvement in current density. Comparatively composites with high defect density graphene demonstrated lower electrical conductivity and current density. This study provides first-of-its-kind evidence of 3D metal composites whose bulk electrical performance has been enhanced using graphene additive in minute quantities. Further developments in this area are essential to achieve high performance composite conductors that can improve energy transport efficiency and pave way for industrial adoption of such materials in the future.

36 MATERIALS SCIENCE↗

Strength-conductivity synergy via lean alloy design: A study on novel solid stir extrusion of an Al-2Cu-0.1 Nb-0.15Zr (~wt.%) alloy

Aluminum alloys find wide applications in power and transmission cables, and electrical conductors due to their advantageous properties of high electrical conductivity, and lower cost per unit. However, the lower tensile strength compared to copper poses a challenge for the mechanical stability of aluminum-based cables. In this study, we addressed this issue by adopting a process-based alloy design approach, creating a lean alloy with a dilute composition of Al-2Cu-0.1 Nb-0.15Zr (~wt.%). Here, the alloy was processed using a friction stir based novel SolidStir® (SSE) technique, followed by low-temperature aging. The resulting aluminum wire exhibited improved strength (240 MPa) while simultaneously enhancing electrical conductivity (64%IACS). The study employed computational simulations (Thermocalc) and experimental techniques (differential scanning calorimetry and transmission electron microscopy) to thoroughly investigate the microstructure. Microstructural examinations revealed that the precipitation kinetics in SSE and SSE+aged conditions played a significant role in enhancing strength and electrical conductivity. These findings demonstrate the successful achievement of high strength and high electrical conductivity in aluminum wire through a lean alloy design approach.

36 MATERIALS SCIENCE↗

Modulation of thermal conductivity of iron-doped ß-Ga2O3 by helium-ion irradiation

This study examines the impact of helium-ion irradiation on the thermal conductivity of ß-Ga2O3. A laser-based spatial domain thermoreflectance technique is used to investigate thermal conductivity map for both un-irradiated and irradiated ß-Ga2O3, which are then validated against simulation results derived from density functional theory-based phonon transport simulations. Since helium bubble evolution was ob- served at the nanoscale using transmission electron microscopy, the simulation study was carried out on eight distinct helium-induced sites in ß-Ga2O3. Our findings indicate a reduction in thermal conductivity for the irradiated samples. Experimental results show a significant reduction in thermal conductivity in irradiated samples, with de- creases of approximately 25% along the [100] direction and 40% along [001] directions. Phonon transport simulations closely replicate these findings, particularly when helium occupying interstitial sites, predicting reductions of ˜53% along [100] and ˜50% along [001] directions. This work underscores the role of irradiation-induced microstructural changes in the heat transport properties of ß-Ga2O3 which is crucial for its application in sensor devices in extreme environments.

36 - MATERIALS SCIENCE↗

Thermophysical property and electrical conductivity of titanium isopropoxide – polysiloxane derived ceramics

In this work, high temperature resistant Si-O-C-Ti has been successfully prepared based on the pyrolysis of polysiloxane (PSO) and titanium (IV) isopropoxide (TTIP) at 1200–1400 °C. PSO can homogeneously mix with TTIP to enhance its conversion to TiC. The carbothermal reactions between TiO 2 (product of thermal decomposition of TTIP) and carbon result in the formation of TiC. All the Si-O-C-Ti composites pyrolyzed at 1200–1300 °C are stable up to 1000 °C in an oxidizing air atmosphere. TiC leads to high electrical conductivity at elevated temperatures; the maximum conductivity is 1176.55 S/m at 950 °C, which is the first reported value of >1000 S/m conductivity for Si-O-C-Ti ceramics. However, too high a pyrolysis temperature, such as 1400 °C, can potentially ‘destabilize’ the Si-O-C-Ti system by consuming the free carbon and result in lower conductivities.

36 MATERIALS SCIENCE↗

Phase-field Modeling of Gas Bubbles and Thermal Conductivity Evolution in Nuclear Fuels

The major factors that influence the thermal conductivity of the ceramics and metals are temperature, stoichiometry, microstructure, porosity, and point defects. Nuclear fuels and structure materials are subject to a severe radiation environment and their properties, including thermal conductivity change significantly with time and irradiation level. In particular, the accumulation of fission products and the formation of He bubbles can decrease the heat transfer, leading to overheating of the fuel element. In this work, we use the phase-field method to study the effect of microstructural changes on thermal conductivity. We developed a phase-field model to simulate the He bubble formation and growth in a single/polycrystalline material with defects. The model takes into account the generation of gas atoms and defects, gas atom diffusivity inhomogeneity, gas atom segregation, and gas bubble nucleation. With the model, we simulated the gas bubble and temperature evolution, and calculated the effect of gas bubble volume fraction on effective thermal conductivity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modelling the thermal conductivity of (U x Th 1-x )O 2 and (U x Pu 1-x )O 2

The degradation of thermal conductivity due to the non-uniform cation lattice of (U x Th 1-x )O 2 and (U x Pu 1-x )O 2 solid solutions has been investigated by molecular dynamics, using the non-equilibrium method, from 300 to 2000 K. Degradation of thermal conductivity is predicted in (U x Th 1-x )O 2 and (U x Pu 1-x )O 2 as compositions deviate from the pure end members: UO 2 , PuO 2 and ThO 2 . The reduction in thermal conductivity is most apparent at low temperatures where phonon-defect scattering dominates over phonon-phonon interactions. The effect is greater for (U x Th 1-x )O 2 than U x Pu 1-x )O 2 due to the greater mismatch in cation size. Parameters for an analytical expressions have been developed that describe the predicted thermal conductivities over the full temperature and compositional ranges. Finally, these expressions may be used in higher level fuel performance codes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Conductivity of carbonate- and perfluoropolyether-based electrolytes in porous separators

In lithium batteries, a porous separator filled with an electrolyte is placed in between the electrodes. Properties of the separator such as porosity and wettability strongly influence the conductivity of the electrolyte-separator composite. This work focuses on three commercial separators: a single layer polypropylene (Celgard 2500), a trilayer polypropylene-polyethylene-polypropylene (PP-PE-PP), and a porous polytetrafluoroethylene (PTFE). Electron microscopy was used to characterize the pore structure, and these experiments reveal large differences in pore morphology. The separators were soaked in both carbonate- and perfluoropolyether-based electrolytes. The conductivity of the neat electrolytes (σ 0 ) varied from 6.46 × 10 -6 to 1.76 × 10 -2 S cm -1 . The porosity and wettability of the separator affect the electrolyte uptake that in turn affect the conductivity of electrolyte-separator composites. The conductivity of the electrolyte-separator composites (σ) was found to follow a master equation, σ = 0.51·σ 0 ·Φ c 3.2±0.2 , where Φ c is the volume fraction of the electrolyte in each separator.

25 ENERGY STORAGE↗

Modeling assisted synthesis of Zr-doped Li 3-x In 1-x Zr x Cl 6 with ultrahigh ionic conductivity for lithium-ion batteries

All-solid-state lithium-ion batteries (ASSLBs) are an important milestone for the future of energy storage because of their capability of impressive energy density and outstanding safety. However, oxide and sulfide solid-state electrolytes (SSEs) suffer from either low ionic conductivity or poor chemical stability. In contrast, halide-based SSEs, are promising as candidate materials owing to high conductivity, good stability, and broad cathode compatibility. Though element doping of the SSEs is an effective and common approach to further improve their electrochemical properties, dopant exploration and optimization through solely experimental trials are both costly and time-consuming. For this aspect, computational simulations for dopant element and concentration screening are adopted in this research and zirconium is selected as a suitable dopant for Li 3 InCl 6 . Further, the synthesized Li 2.75 In 0.75 Zr 0.25 Cl 6 exhibited Li ionic conductivity of 5.82 x 10 -3 Scm -1 at room temperature, which is the highest among reported halide SSEs. The ASSLB formed with Li 2 CoO 2 -Li 2.75 In 0.75 Zr 0.25 Cl 6 -Li/In delivers a high initial capacity of 129.3 mAh∙g -1 . Conclusively, this work provides an effective approach which combines computational modeling and experimental verification for the development of halide SSEs with improved stability and conductivity. The successful design approach and compelling results provide further possibilities and capabilities in future SSE research.

25 ENERGY STORAGE↗