SEARCH · Engineering Papers

Results for “conditional probability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

All sources NASA NTRS DOE OSTI

NASA NTRS1996

High Resolution UV Spectroscopy of H2 and N2 Applied to Observations of the Planets by Spacecraft

The next generation of high resolution UV imaging spacecraft are being prepared for studying the airglow and aurora of the Earth, the other terrestrial planets and the Jovian planets. To keep pace with these technological improvements we have developed a laboratory program to provide electron impact collision cross sections of the major molecular planetary gases (H2, N2, CO2, O2, and CO). Spectra under optically thin conditions have been measured with a high resolution (lambda/delta(lambda) = 50000) UV spectrometer in tandem with electron impact collision chamber. High resolution spectra of the Lyman and Wemer band systems of H2 have been obtained and modeled. Synthetic spectral intensities based on the J-dependent transition probabilities that include ro-vibronic perturbations are in very good agreement with experimental intensities. The kinetic energy distribution of H(2p,3p) atoms resulting from electron impact dissociation of H2 has been measured. The distribution is based on the first measurement of the H Lyman-alpha (H L(alpha)) and H Lyman-beta (H L(beta)) emission line Doppler profiles. Electron impact dissociation of H2 is believed to be one of the major mechanisms leading to the observed wide profile of H L-alpha from Jupiter aurora by the Hubble Space Telescope (HST). Analysis of the deconvolved line profile of H L-alpha reveals the existence of a narrow line peak (40 mA FWHM) and a broad pedestal base (240 mA FWHM). The band strengths of the electron excited N2 (C(sup 3) Pi(sub(upsilon) - B(sup 3)Pi(sub g)) second positive system have been measured in the middle ultraviolet. We report a quantitative measurement of the predissociation fraction 0.15 +/- 01(sup .045, sub .01) at 300 K in the N2 c'(sub )4 (1)sigma(sup +, sub g) - x(1)sigma(sup +, sub g)(00) band, with an experimental determination of rotational line strengths to be used to understand N2 EUV emission from Titan, Triton and the Earth.

Ajello, J.↗

NASA NTRS2005

Non-Gaussian Analysis of Turbulent Boundary Layer Fluctuating Pressure on Aircraft Skin Panels

The purpose of the study is to investigate the probability density function (PDF) of turbulent boundary layer fluctuating pressures measured on the outer sidewall of a supersonic transport aircraft and to approximate these PDFs by analytical models. Experimental flight results show that the fluctuating pressure PDFs differ from the Gaussian distribution even for standard smooth surface conditions. The PDF tails are wider and longer than those of the Gaussian model. For pressure fluctuations in front of forward-facing step discontinuities, deviations from the Gaussian model are more significant and the PDFs become asymmetrical. There is a certain spatial pattern of the skewness and kurtosis behavior depending on the distance upstream from the step. All characteristics related to non-Gaussian behavior are highly dependent upon the distance from the step and the step height, less dependent on aircraft speed, and not dependent on the fuselage location. A Hermite polynomial transform model and a piecewise-Gaussian model fit the flight data well both for the smooth and stepped conditions. The piecewise-Gaussian approximation can be additionally regarded for convenience in usage after the model is constructed.

Rizzi, Stephen A.↗

DOE OSTI2021

On the Stochastic Stability of Deep Markov Models

Deep Markov models (DMM) are generative models which are scalable and expressive generalization of Markov models for representation, learning, and inference problems. DMMs using deep neural networks to parametrize the transition of Markov probability distributions have recently been shown to provide more expressiveness in modeling sequential data and dynamical system responses. However, the fundamental stochastic stability guarantees of such models have not been thoroughly investigated. In this paper, we present a rigorous analytical method to prove the necessary and sufficient conditions of DMM's stochastic stability. This task is achieved by spectral analysis of the efficiently computed Jacobians of probabilistic maps modeled by deep neural networks. We make theoretical connections between the eigenvalues of neural network's weights and the different activation function types used on the stability and overall dynamic behavior of DMMs with Gaussian distributions. We empirically substantiate our theoretical results on stochastic stability and eigenvalue spectra via several numerical experiments. Formal stability guarantees of DMMs can substantially improve their robustness and trustworthiness, necessary for reliable use in safety-critical real-world applications.

Drgona, Jan↗

NASA NTRS2020

Probability of Decompression Sickness and Venous Gas Emboli from 49 NASA Hypobaric Chamber Tests with Reference to Exploration Atmosphere

Introduction: Decompression sickness (DCS) is a complex biophysical event; it combines human perception of pain, for instance, and the presence of a gas phase in the tissues. Living tissues are complex and dynamic. Micronuclei and later bubbles may or may not form given what appears to be the same conditions. Even when bubbles grow, symptoms may or may not develop under what appears to be the same conditions. Therefore, at this time it is appropriate to consider DCS as a probabilistic rather than a deterministic event. Methods: Probabilistic models about hypobaric DCS and venous gas emboli (VGE) require a large amount of quality research data, a definition of decompression dose using physical and physiologic variables, and a flexible analytical approach that can quantify the association between each outcome and all covariates of interest (assuming independence between DCS and VGE) and then ultimately be extended to acknowledge dependencies between DCS and VGE. Our DCS and VGE data are from 1,031 hypobaric decompressions from 1983 to 2016. A total of 577 humans participated in 49 hypobaric chamber tests to evaluate denitrogenation procedures used by astronauts in the Space Shuttle and International Space Station programs. We defined decompression dose as the ratio of computed nitrogen tension in a theoretical 360-minute half-time compartment to ambient pressure, which accounts for denitrogenation and exposure pressure as well as explanatory variables such as age, sex, body mass index, and the presence or absence of ambulation as part of exercise at the exposure pressure. A parametric survival model, using a log-logistic distribution, was used to quantify the time to development of DCS, VGE, and Grade IV VGE. Results: Our survival estimates are applicable to simple hypobaric decompressions, such as depressurizations in 5 to 30 minutes to exposure pressures between 4 and 10 pounds per square inch absolute (psia) and after minutes to hours of denitrogenation, either under resting or exercise conditions to accelerated denitrogenation. The regressions are applicable to exposures between 2 to 6 hours and under conditions of ambulation or no ambulation as part of exercise at the test pressure. We estimate that an exposure to 4.3 psia with simulated extravehicular activity (EVA) that includes ambulation after equilibration to the exploration atmosphere at 8.2 psia with a 34% oxygen atmosphere will result in 3.1% DCS (1.8% to 5.2 95% confidence interval), 23.2% VGE (16.7 to 31.2%), and 8.5% Grade IV VGE (4.7 to 14.7%) in equal samples of men and women exposed for 6 hours. Discussion: Probabilistic models for DCS, VGE, and Grade IV VGE can be used to inform those that plan future EVAs. Their applications are useful to quantify the risk of DCS and VGE in astronauts that perform EVAs in low-pressure space suits while in space or while exploring the surfaces of the moon or Mars.

Johnny Conkin↗

DOE OSTI2020

Integrated Circuit Design for Radiation-Hardened Charge-Sensitive Amplifier Survived up to 2 Mrad

According to the continuous development of metal-oxide semiconductor (MOS) fabrication technology, transistors have naturally become more radiation-tolerant through steadily decreasing gate-oxide thickness, increasing the tunneling probability between gate-oxide and channel. Unfortunately, despite this radiation-hardened property of developed transistors, the field of nuclear power plants (NPPs) requires even higher radiation hardness levels. Particularly, total ionizing dose (TID) of approximately 1 Mrad could be required for readout circuitry under severe accident conditions with 100 Mrad around a reactor in-core required. In harsh radiating environments such as NPPs, sensors such as micro-pocket-fission detectors (MPFD) would be a promising technology to be operated for detecting neutrons in reactor cores. For those sensors, readout circuits should be fundamentally placed close to sensing devices for minimizing signal interferences and white noise. Therefore, radiation hardening ability is necessary for the circuits under high radiation environments. This paper presents various integrated circuit designs for a radiation hardened charge-sensitive amplifier (CSA) by using SiGe 130 nm and Si 180 nm fabrication processes with different channel widths and transistor types of complementary metal-oxide-semiconductor (CMOS) and bipolar CMOS (BiCMOS). These circuits were tested under γ–ray environment with Cobalt-60 of high level activity: 490 kCi. The experiment results indicate amplitude degradation of 2.85%–34.3%, fall time increase of 201–1730 ns, as well as a signal-to-noise ratio (SNR) of 0.07–11.6 dB decrease with irradiation dose increase. These results can provide design guidelines for radiation hardening operational amplifiers in terms of transistor sizes and structures.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS1982

The W Serpentis binaries with a few words on epsilon Aurigae

The Algol systems, U-Cephei and V356 Sagittarii, which should be included among the W Serpentis stars, characterized by strong ultraviolet emission lines are discussed. The spectra of the W-Ser stars are similar to those of the T-Tauri stars, and a similarity of physical conditions is indicated. A model of W-Serpentis, a B-star embedded in a thick disk, may be relevant to other exotic eclipsing systems, possibly even to obliquity of ecliptic Aurigae. The obliquity of ecliptic and the relationship to Aur, BM Orionis is reviewed; the system probably contains a pre main sequence star highly flattened by differential rotation.

Plavec, M. J.↗

NASA NTRS1985

Photoenhanced thermal oxidation of InP

The growth rate of laser-photoenhanced thermally grown native oxides of InP in a N2O ambient and its dependence on growth condition are presented. Increased laser power, substrate temperature, and N2O pressure are observed to increase the growth rate. The topography and the composition of these oxides have been studied using secondary electron microscopy and X-ray photoemission spectroscopy, respectively. The oxide layers contain In2O3 and a phosphate, probably InPO4. The enhanced growth appears to be caused by both excited oxidizing species and a photon-enhanced surface reaction.

Fathipour, M.↗

NASA NTRS1988

Thermal metamorphism

Most chondrites have experienced thermal metamorphism, resulting in changes in texture, mineralogy and possibly chemical composition. The physical conditions for metamorphism range from approximately 400 to 1000 C at low lithostatic pressure. Metamorphism may have resulted from decay of short-lived radionuclides, electromagnetic induction or accretion of hot materials. Several thermal models for chondrite parent bodies have been proposed. The least metamorphosed type-3 chondrites probably carry the most information about the early solar system, but even these have been affected to some degree by thermal processing.

Mcsween, Harry Y., Jr.↗

NASA NTRS1994

Motion of the heliospheric termination shock. 2: Energy loss due to energetic particle acceleration

We present a generalization of earlier analysis of the motion of the heliospheric termination shock in response to heliospheric disturbances (Barnes, 1993) (paper 1), to allow jump conditions that include an energy sink at the shock front. The motivation for this study is that acceleration of the anomalous cosmic ray component may in fact represent such a sink. We have idealized the situation by assuming an infinitely thin shock parameterized by a quantity lambda(0 less than or equals lambda less than or equals 1), defined as the fraction of solar wind energy that is lost due to acceleration of the energetic particle component. If the sink is strong (consuming, say, 50% or more of the incident solar wind energy), the model leads to the following principal conclusions: (1) the shocked plasma would be much denser and cooler than in the standard gasdynamic case, thereby leading to more favorable conditions for direct observation of the shocked plasma; (2) the equilibrium shock position would be slightly farther (less than 10%) from the Sun than in the standard model; (3) as in the gasdynamic case, the shock would normally be in motion, so that the instantaneous position of the termination shock is not determined by interstellar conditions but by the recent history of the wind that has passed through the termination shock; and (4) the response of the shock to upstream disturbances would be similar to the response in the gasdynamic case, but the speed of the new termination shock would be somewhat smaller (probably by a f actor of 4 or less). We estimate that this speed is typically, approximately a few tens of kilometers per second corresponding to an inward or outward excursion of order of less than 1 to several AU, rather less than conventional estimates of several tens of AU.

Barnes, Aaron↗

NASA NTRS1998

Measurement of net whole-body transcapillary fluid transport and effective vascular compliance in humans

BACKGROUND: Net whole-body transcapillary fluid transport (TFT) between the circulation and the interstitial (extravascular) space may be calculated as: IV - deltaPV - UV - IL, where IV=infused or ingested volume (when applicable), deltaPV = change in plasma volume, UV=urine volume, and IL=insensible loss. RESULTS: Infusion of 30 mL/kg isotonic saline over 25 minutes increased supine TFT from a basal capillary reabsorption of -106+/-24 mL/h (mean+/-SE) to a net filtration of 1,229+/-124 mL/h. One hour after infusion, reabsorption of -236+/-102 mL/h was seen, and control reabsorption levels returned by 3 hours. Four hours of 30 mm Hg lower body negative pressure (LBNP) elicited no net TFT, probably because of upper body reabsorptive compensation for lower body capillary filtration. When ingestion of 1 L of isotonic saline accompanied LBNP, filtration of 145+/-10 mL/h occurred. Reabsorption of extravascular fluid into the circulation always followed LBNP. CONCLUSION: Application of this technique could aid understanding of physiologic conditions, experimental interventions, disease states, and therapies that cause or are influenced by fluid shifts between intravascular and interstitial compartments.

NASA Center JSC↗

NASA NTRS2006

CFDP Performance over Weather-Dependent Ka-Band Channel

This study presents an analysis of the delay performance of the CCSDS File Delivery Protocol (CFDP) over weather-dependent Ka-band channel. The Ka-band channel condition is determined by the strength of the atmospheric noise temperature, which is weather dependent. Noise temperature data collected from the Deep Space Network (DSN) Madrid site is used to characterize the correlations between good and bad channel states in a two-state Markov model. Specifically, the probability distribution of file delivery latency using the CFDP deferred Negative Acknowledgement (NAK) mode is derived and quantified. Deep space communication scenarios with different file sizes and bit error rates (BERs) are studied and compared. Furthermore, we also examine the sensitivity of our analysis with respect to different data sampling methods. Our analysis shows that while the weather-dependent channel only results in fairly small increases in the average number of CFDP retransmissions required, the maximum number of transmissions required to complete 99 percentile, on the other hand, is significantly larger for the weather-dependent channel due to the significant correlation of poor weather states.

weather↗

NASA NTRS2006

CFDP Performance over Weather-dependent Ka-band Channel

deep space communications↗

DOE OSTI2021

Light potentials of photosynthetic energy storage in the field: what limits the ability to use or dissipate rapidly increased light energy?

The responses of plant photosynthesis to rapid fluctuations in environmental conditions are critical for efficient conversion of light energy. These responses are not well-seen laboratory conditions and are difficult to probe in field environments. We demonstrate an open science approach to this problem that combines multifaceted measurements of photosynthesis and environmental conditions, and an unsupervised statistical clustering approach. In a selected set of data on mint (Mentha sp.), we show that ‘light potentials’ for linear electron flow and non-photochemical quenching (NPQ) upon rapid light increases are strongly suppressed in leaves previously exposed to low ambient photosynthetically active radiation (PAR) or low leaf temperatures, factors that can act both independently and cooperatively. Further analyses allowed us to test specific mechanisms. With decreasing leaf temperature or PAR, limitations to photosynthesis during high light fluctuations shifted from rapidly induced NPQ to photosynthetic control of electron flow at the cytochrome b 6 f complex. At low temperatures, high light induced lumen acidification, but did not induce NPQ, leading to accumulation of reduced electron transfer intermediates, probably inducing photodamage, revealing a potential target for improving the efficiency and robustness of photosynthesis. We discuss the implications of the approach for open science efforts to understand and improve crop productivity.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Time-Resolved X-ray Emission Spectroscopy and Resonant Inelastic X-ray Scattering Spectroscopy of Laser Irradiated Carbon

The existence of liquid carbon as an intermediate phase preceding the formation of novel carbon materials has been a point of contention for several decades. Experimental observation of such a liquid state requires nonthermal melting of solid carbon materials at various laser fluences and pulse properties. Reflectivity experiments performed in the mid-1980s reached opposing conclusions regarding the metallic or insulating properties of the purported liquid state. Time-resolved X-ray absorption studies showed shortening of C–C bonds and increasing diffraction densities, thought to evidence a liquid or glassy carbon state, respectively. Nevertheless, none of these experiments provided information on the electronic structure of the proposed liquid state. Herein, we report the results of time-resolved resonant inelastic X-ray scattering (RIXS) and time-resolved X-ray emission spectroscopy (XES) studies on amorphous carbon (a-C) and ultrananocrystalline diamond (UNCD) as a function of delay time between the irradiating pulse and X-ray probe. For both a-C and UNCD, we attribute decreases in RIXS or XES signals to transition blocking, relaxation, and finally, ablation. Increased signal at 20 ps following the irradiation of the UNCD is attributed to the probable formation of nanoscale structures in the ablation plume. Further, differences in the amount of signal observed between a-C and UNCD are explained by the difference in sample thickness and, specifically, incomplete melting of the UNCD film. Comparisons to spectral simulations based on MD trajectories at extreme conditions indicate that the carbon state in our experiments is crystalline. Normal mode analysis confirmed that symmetrical bending or stretching of the C–C bonds in the diamond lattice results in XES spectra with small intensity differences. Overall, we observed no evidence of melting to a liquid state, as determined by the lack of changes in the spectral properties for up to 100 ps delays following the melting pulses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Capture, storage, and re-use of liquid hydrogen boil-off for aviation and aerospace applications

Despite major interest in the use of liquid hydrogen as a fuel for aviation and aerospace sectors, loss of hydrogen through boil-off continues to be a hurdle as it causes financial loss, indirect greenhouse gas emissions, and safety concerns. Herein, we perform techno-economic analysis, calibrated with experimental measurements, to assess the use of sorbents to capture and condition hydrogen boil-off events in the range of 1.5 to 70 tonnes per day at launch sites and airports. We evaluate the direct delivery of captured boil-off to combustion engines and fuel cells, comparing against boil-off re-liquification and compression. Results indicate probable cost-effectiveness at delivered liquid hydrogen prices above 0.9 U.S. dollar ($) per kg H2 at airports, and above 10 $ per kg H2 at launch sites where 10% or more of hydrogen is lost to boil-off.

08 HYDROGEN↗

DOE OSTI2026

Charge accumulation and solvation in $β$-NiOOH: Surface chemistry of an OER catalyst from ML-aided simulations

Electrochemical water splitting is a key technology for a sustainable energy transition, providing a route to store surplus electricity from renewable sources. A central bottleneck is the sluggish oxygen evolution reaction (OER), which drives the search for catalysts that are active, stable, and inexpensive enough for large-scale deployment. Within this context, pure and doped NiO x H y combine high activity with low cost, making them prime candidates for alkaline OER. Yet, despite extensive study, the atomistic structure of NiOOH under operando conditions and the associated reaction mechanisms remain debated. Here, we investigate the structural complexity of pure β-NiOOH, the scaffold for its doped derivatives. We systematically investigate the oxidation of the surface adsorbates via proton-coupled electron transfer steps across relevant facets and sites, identifying the most probable sequence of deprotonation events. Our results reveal asymmetric charge accumulation on Wulff-relevant surfaces and show how applied potential can promote morphological restructuring. Explicit solvation is included through machine-learning interatomic potential molecular dynamics of the NiOOH/water interface, which allows us to resolve the hydrophobic and hydrophilic character of different surfaces and the associated interfacial water structure. Together, these insights demonstrate how surface chemistry and solvation jointly govern the stability of NiOOH and the accumulation of surface charge, with possible implications for catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Tritium Fires: Simulation and Safety Assessment

This is the Sandia report from a joint NSRD project between Sandia National Labs and Savannah River National Labs. The project involved development of simulation tools and data intended to be useful for tritium operations safety assessment. Tritium is a synthetic isotope of hydrogen that has a limited lifetime, and it is found at many tritium facilities in the form of elemental gas (T 2 ). The most serious risk of reasonable probability in an accident scenario is when the tritium is released and reacts with oxygen to form a water molecule, which is subsequently absorbed into the human body. This tritium oxide is more readily absorbed by the body and therefore represents a limiting factor for safety analysis. The abnormal condition of a fire may result in conversion of the safer T 2 inventory to the more hazardous oxidized form. It is this risk that tends to govern the safety protocols. Tritium fire datasets do not exist, so prescriptive safety guidance is largely conservative and reliant on means other than testing to formulate guidelines. This can have a consequence in terms of expensive and/or unnecessary mitigation design, handling protocols, and operational activities. This issue can be addressed through added studies on the behavior of tritium under representative conditions. Due to the hazards associated with the tests, this is being approached mainly from a modeling and simulation standpoint and surrogate testing. This study largely establishes the capability to generate simulation predictions with sufficiently credible characteristics to be accepted for safety guidelines as a surrogate for actual data through a variety of testing and modeling activities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS1974

An exploratory investigation of a wake disruption technique for studying wake reestablishment time

An exploratory investigation was made of a wake disruption technique for studying the hypersonic-wake reestablishment time in a blowdown wind tunnel. In this technique, a highly underexpanded jet issuing from the base of a 10 deg half-angle cone totally disrupts and displaces the conventional wake. The jet was rapidly shut off by an explosively actuated valve and the time for wake reestablishment was measured. The tests were conducted in the Mach 6 high Reynolds number tunnel at a stagnation temperature of 506 K and stagnation pressure of 2.86 MPa. The model base jet stagnation pressure was 3.55 MPa at room temperature. High-speed schlieren motion pictures indicated that disappearance of the disrupting jet and reestablishment of the wake-recompression shock were probably occurring simultaneously and that the time disruptive-jet-air shutoff to wake recompression shock reestablishment was probably between 200 and 450 microseconds (flow lengths from 1.8 to 4.2). The values of flow lengths are about one-thord to one-half the values measured in impulse facilities in a previous study. This shorter time is believed to be largely due to difference in flow conditions between the jet disruption technique and impulse facilities.

Clark, L. E.↗