Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “communication system interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Electrical-current-induced magnetic hysteresis in self-assembled vertically aligned L a 2 / 3 S r 1 / 3 Mn O 3 : ZnO nanopillar composites

Magnetoresistive random-access memory (MRAM) is poised to become a next-generation information storage device. Yet, many materials challenges remain unsolved before it can become a widely used memory storage solution. Among them, an urgent need is to identify a material system that is suitable for downscaling and is compatible with low-power logic applications. Self-assembled, vertically aligned La 2/3 Sr 1/3 MnO 3 : ZnO nanocomposites, in which La 2/3 Sr 1/3 MnO 3 (LSMO) matrix and ZnO nanopillars form an intertwined structure with coincident-site-matched growth occurring between the LSMO and ZnO vertical interfaces, may offer new MRAM applications by combining their superior electric, magnetic ( B ), and optical properties. Here, in this Rapid Communication, we show the results of electrical current induced magnetic hysteresis in magnetoresistance measurements in these nanopillar composites. We observe that when the current level is low, for example, 1 µA, the magnetoresistance displays a linear, negative, nonhysteretic B field dependence. Surprisingly, when a large current is used, I > 10 µA, a hysteretic behavior is observed when the B field is swept in the up and down directions. This hysteresis weakens as the sample temperature is increased. Finally, a possible spin-valve mechanism related to this electrical current induced magnetic hysteresis is proposed and discussed.

36 MATERIALS SCIENCE↗

The 30/20 Gigahertz transponder study

Design features and performance parameters are described for three types of wideband multiple channel satellite transponders for use in a 30/20 GHz communications satellite, which provides high data rate trunking service to ten ground station terminals. The three types of transponder are frequency division multiplex (FDM), time division multiplex (TDM), and a hybrid transponder using a combination of FDM and TDM techniques. The wideband multiple beam trunking concept, the traffic distribution between the trunking terminals, and system design constraints are discussed. The receiver front end design, the frequency conversion scheme, and the local oscillator design are described including the thermal interface between the transponders and the satellite. The three designs are compared with regard to performance, weight, power, cost and initial technology. Simplified block diagrams of the baseline transponder designs are included.

Source record↗

Government-to-government cooperation in space station development

A memoranda of understanding was recently signed between the United States (NASA) and three international Space Station partners - Canada, European Space Agency (ESA), and Japan. The international partners are performing parallel Phase B preliminary design studies, concurrent with the U.S., on their proposed elements/systems for possible integration and operation with the U.S. Space Station System complex. During the 21-month Space Station Phase B study, a large amount of technical interface data will have to be transferred between the U.S. and the international partners. Scheduled bilateral technical coordination meetings will also be held. The coordination and large number of interfaces required to integrate the international requirements into the Space Station require a clean interface management organizational structure and operation procedures to accomplish the integration task. The international coordination management organizational structure, management tools, and communications network are discussed including the proposed international elements/systems being studied by the international partners.

Nassiff, S. H.↗

A multiprocessing architecture for real-time monitoring

A multitasking architecture for performing real-time monitoring and analysis using knowledge-based problem solving techniques is described. To handle asynchronous inputs and perform in real time, the system consists of three or more distributed processes which run concurrently and communicate via a message passing scheme. The Data Management Process acquires, compresses, and routes the incoming sensor data to other processes. The Inference Process consists of a high performance inference engine that performs a real-time analysis on the state and health of the physical system. The I/O Process receives sensor data from the Data Management Process and status messages and recommendations from the Inference Process, updates its graphical displays in real time, and acts as the interface to the console operator. The distributed architecture has been interfaced to an actual spacecraft (NASA's Hubble Space Telescope) and is able to process the incoming telemetry in real-time (i.e., several hundred data changes per second). The system is being used in two locations for different purposes: (1) in Sunnyville, California at the Space Telescope Test Control Center it is used in the preflight testing of the vehicle; and (2) in Greenbelt, Maryland at NASA/Goddard it is being used on an experimental basis in flight operations for health and safety monitoring.

Schmidt, James L.↗

Toward Integrated Operator Interface for Advanced Teleoperation under Time-Delay

This paper briefly describes an Advanced Teleoperator (ATOP) system and its control station where a variety of computer-based operator interface devices and techniques are integrated into a functional setting, accommodating a primary operator and secondary operators. Computer graphics is a key operator interface component in the control station where new types of manual interface devices also are employed. The results of some generic and applications task experiments are summarized, including the performance of a simulated remote satellite servicing task, carried out under four to eight seconds communications time delay, using satellite TV and Internet computer communication links. In conclusion, the paper highlights the lessons learned so far,.

remote control communications delay automation↗

AMO EXPRESS: A Command and Control Experiment for Crew Autonomy

NASA is investigating a range of future human spaceflight missions, including both Mars-distance and Near Earth Object (NEO) targets. Of significant importance for these missions is the balance between crew autonomy and vehicle automation. As distance from Earth results in increasing communication delays, future crews need both the capability and authority to independently make decisions. However, small crews cannot take on all functions performed by ground today, and so vehicles must be more automated to reduce the crew workload for such missions. NASA's Advanced Exploration Systems Program funded Autonomous Mission Operations (AMO) project conducted an autonomous command and control demonstration of intelligent procedures to automatically initialize a rack onboard the International Space Station (ISS) with power and thermal interfaces, and involving core and payload command and telemetry processing, without support from ground controllers. This autonomous operations capability is enabling in scenarios such as a crew medical emergency, and representative of other spacecraft autonomy challenges. The experiment was conducted using the Expedite the Processing of Experiments for Space Station (EXPRESS) rack 7, which was located in the Port 2 location within the U.S Laboratory onboard the International Space Station (ISS). Activation and deactivation of this facility is time consuming and operationally intensive, requiring coordination of three flight control positions, 47 nominal steps, 57 commands, 276 telemetry checks, and coordination of multiple ISS systems (both core and payload). The autonomous operations concept includes a reduction of the amount of data a crew operator is required to verify during activation or de-activation, as well as integration of procedure execution status and relevant data in a single integrated display. During execution, the auto-procedures provide a step-by-step messaging paradigm and a high level status upon termination. This messaging and high level status is the only data generated for operator display. To enhance situational awareness of the operator, the Web-based Procedure Display (WebPD) provides a novel approach to the issues of procedure display and execution tracking. For this demonstration, the procedure was initiated and monitored from the ground. As the Timeliner sequences executed, their high level execution status was transmitted to ground, for WebPD consumption.

Stetson, Howard K.↗

Clinical Decision Support - Concepts of Operation

We are entering a new era in space exploration to return to the moon and explore Mars. Crew members operating independently during long duration space exploration missions will require a clinical decision support system (CDSS) to increase autonomy by augmenting their knowledge, skills and abilities in different scenarios. Significant changes to in-flight and habitat medical care due to constraints on mass, volume, power, crew time and medical evacuation capabilities are needed to increase crew autonomy and self-reliance in decision making and task performance. The Exploration Medical Capability (ExMC) Element of the Human Research Program (HRP) pushes the boundary of space medical systems to advance the care of astronauts on future exploration missions beyond low Earth orbit by identifying and testing next-generation medical care and crew health maintenance technologies. Clinical decision support (CDS) presents knowledge and data in a context aware manner to augment a crew members’ knowledge, skills and abilities during the process of observation, orientation, decisions and action. A comprehensive crew health and performance CDSS is required to augment crew capability and will be used in different scenarios for several reasons. In general, the CDSS’s role is to assist the crew in prevention, detection, diagnosis and treatment of crew health and performance related conditions that may arise in exploration spaceflight. For example, CDSS would assist a high acuity scenario such as a heart attack by supplying clear instructions, vital signs and treatment reminders. A lower severity scenario such as kidney stone risk could interface to vehicle systems and display more complex predictive data during a diagnosis. A CDSS needs to contribute to successful missions by maintaining a high performing crew who can potentially exhibit countless medical conditions related to derangements from the space environment (sleep, cognition, nutrition and exercise) as well as conditions intrinsic to humans anywhere. While supporting the crew’s ability to make sound clinical decisions is desirable in any mission, it is essential for exploration missions with significant communication delays, no evacuation capability, and extended exposure to the flight environment. Such missions correspond with medical Level of Care V (LOC V), the highest level specified in NASA-STD-3001. The project focuses on CDS implementation research to derive requirements for LOC V, where the need for increased autonomy results in new practices and the inclusion of non-clinical data, such as vehicle environmental measures and physical exercise results, from other human and vehicle domains and advanced analytics. The CDS project describes how the CDSS is intended to be used by defining concepts of operations (ConOps). The process to derive ConOps focuses on increased autonomy that reduces the likelihood and consequences of accepted medical conditions. These crew health and performance inputs are grouped by common datasets and analysis models. Use cases are derived to research new clinical scenarios, architectural development and workflows. Implementation research is conducted with protypes to inform assumptions and derive requirements. The project also establishes how externally developed analysis and approaches can be added to expand a clinical decision support system and thus highlight how a comprehensive system can be globally developed with collaborators. This presentation will cover example scenarios from the CDS ConOps and the method to derive them. One example scenario will be CDSS alerting an increased kidney stone risk during a mission, with diagnosis and treatment options provided during the intervention.

clinical decision support↗

Clinical Decision Support - Concepts of Operation

We are entering a new era in space exploration to return to the moon and explore Mars. Crew members operating independently during long duration space exploration missions will require a clinical decision support system (CDSS) to increase autonomy by augmenting their knowledge, skills and abilities in different scenarios. Significant changes to in-flight and habitat medical care due to constraints on mass, volume, power, crew time and medical evacuation capabilities are needed to increase crew autonomy and self-reliance in decision making and task performance. The Exploration Medical Capability (ExMC) Element of the Human Research Program (HRP) pushes the boundary of space medical systems to advance the care of astronauts on future exploration missions beyond low Earth orbit by identifying and testing next-generation medical care and crew health maintenance technologies. Clinical decision support (CDS) presents knowledge and data in a context aware manner to augment a crew members’ knowledge, skills and abilities during the process of observation, orientation, decisions and action. A comprehensive crew health and performance CDSS is required to augment crew capability and will be used in different scenarios for several reasons. In general, the CDSS’s role is to assist the crew in prevention, detection, diagnosis and treatment of crew health and performance related conditions that may arise in exploration spaceflight. For example, CDSS would assist a high acuity scenario such as a heart attack by supplying clear instructions, vital signs and treatment reminders. A lower severity scenario such as kidney stone risk could interface to vehicle systems and display more complex predictive data during a diagnosis. A CDSS needs to contribute to successful missions by maintaining a high performing crew who can potentially exhibit countless medical conditions related to derangements from the space environment (sleep, cognition, nutrition and exercise) as well as conditions intrinsic to humans anywhere. While supporting the crew’s ability to make sound clinical decisions is desirable in any mission, it is essential for exploration missions with significant communication delays, no evacuation capability, and extended exposure to the flight environment. Such missions correspond with medical Level of Care V (LOC V), the highest level specified in NASA-STD-3001. The project focuses on CDS implementation research to derive requirements for LOC V, where the need for increased autonomy results in new practices and the inclusion of non-clinical data, such as vehicle environmental measures and physical exercise results, from other human and vehicle domains and advanced analytics. The CDS project describes how the CDSS is intended to be used by defining concepts of operations (ConOps). The process to derive ConOps focuses on increased autonomy that reduces the likelihood and consequences of accepted medical conditions. These crew health and performance inputs are grouped by common datasets and analysis models. Use cases are derived to research new clinical scenarios, architectural development and workflows. Implementation research is conducted with protypes to inform assumptions and derive requirements. The project also establishes how externally developed analysis and approaches can be added to expand a clinical decision support system and thus highlight how a comprehensive system can be globally developed with collaborators. This presentation will cover example scenarios from the CDS ConOps and the method to derive them. One example scenario will be CDSS alerting an increased kidney stone risk during a mission, with diagnosis and treatment options provided during the intervention.

clinical decision support↗

A Near-Term Concept for Trajectory Based Operations with Air/Ground Data Link Communication

An operating concept and required system components for trajectory-based operations with air/ground data link for today's en route and transition airspace is proposed. Controllers are fully responsible for separation as they are today, and no new aircraft equipage is required. Trajectory automation computes integrated solutions to problems like metering, weather avoidance, traffic conflicts and the desire to find and fly more time/fuel efficient flight trajectories. A common ground-based system supports all levels of aircraft equipage and performance including those equipped and not equipped for data link. User interface functions for the radar controller's display make trajectory-based clearance advisories easy to visualize, modify if necessary, and implement. Laboratory simulations (without human operators) were conducted to test integrated operation of selected system components with uncertainty modeling. Results are based on 102 hours of Fort Worth Center traffic recordings involving over 37,000 individual flights. The presence of uncertainty had a marginal effect (5%) on minimum-delay conflict resolution performance, and windfavorable routes had no effect on detection and resolution metrics. Flight plan amendments and clearances were substantially reduced compared to today s operations. Top-of-descent prediction errors are the largest cause of failure indicating that better descent predictions are needed to reliably achieve fuel-efficient descent profiles in medium to heavy traffic. Improved conflict detections for climbing flights could enable substantially more continuous climbs to cruise altitude. Unlike today s Conflict Alert, tactical automation must alert when an altitude amendment is entered, but before the aircraft starts the maneuver. In every other failure case tactical automation prevented losses of separation. A real-time prototype trajectory trajectory-automation system is running now and could be made ready for operational testing at an en route Center in 1-2 years.

McNally, David↗

On the Development and Application of High Data Rate Architecture (HiDRA) in Future Space Networks

Historically, space missions have been severely constrained by their ability to downlink the data they have collected. These constraints are a result of relatively low link rates on the spacecraft as well as limitations on the time during which data can be sent. As part of a coherent strategy to address existing limitations and get more data to the ground more quickly, the Space Communications and Navigation (SCaN) program has been developing an architecture for a future solar system Internet. The High Data Rate Architecture (HiDRA) project is designed to fit into such a future SCaN network. HiDRA's goal is to describe a general packet-based networking capability which can be used to provide assets with efficient networking capabilities while simultaneously reducing the capital costs and operational costs of developing and flying future space systems.Along these lines, this paper begins by reviewing various characteristics of modern satellite design as well as relevant characteristics of emerging technologies (such as free-space optical links capable of working at 100+ Gbps). Next, the paper describes HiDRA's design, and how the system is able to both integrate and support the operation of not only today's high-rate systems, but also the high-rate systems likely to be found in the future. This section also explores both existing and future networking technologies, such as Delay Tolerant Networking (DTN) protocol (RFC4838 citeRFC:1, RFC5050citeRFC:2), and explains how HiDRA supports them. Additionally, this section explores how HiDRA is used for scheduling data movement through both proactive and reactive link management. After this, the paper moves on to explore a reference implementation of HiDRA. This implementation is currently being realized based on a Field Programmable Gate Array (FPGA) memory and interface controller that is itself controlled by a local computer running DTN software. Next, this paper explores HiDRA's natural evolution, which includes an integration path for software-defined networking (SDN) switches. This section also describes considerations for both near-Earth and deep-space instantiations of HiDRA, describing how differences in latencies between the environments will necessarily influence how the system is configured and the networks operate. Finally, this paper describes future work. This section includes a description of a potential ISS implementation which will allow rapid advancement through the technology readiness levels (TRL). This section also explores work being done to support HiDRA's successful implementation and operation in a heterogeneous network: such a network could include communications equipment spanning many vintages and capabilities, and one significant aspect of HiDRA's future development involves balancing compatibility with capability.

DTN↗

Performance analysis of distributed symmetric sparse matrix vector multiplication algorithm for multi-core architectures

In this article, sparse matrix vector multiply (SpMVM) is an important kernel that frequently arises in high performance computing applications. Due to its low arithmetic intensity, several approaches have been proposed in literature to improve its scalability and efficiency in large scale computations. In this paper, our target systems are high end multi-core architectures and we use messaging passing interface + open multiprocessing hybrid programming model for parallelism. We analyze the performance of recently proposed implementation of the distributed symmetric SpMVM, originally developed for large sparse symmetric matrices arising in ab initio nuclear structure calculations. We also study important features of this implementation and compare with previously reported implementations that do not exploit underlying symmetry. Our SpMVM implementations leverage the hybrid paradigm to efficiently overlap expensive communications with computations. Our main comparison criterion is the "CPU core hours" metric, which is the main measure of resource usage on supercomputers. We analyze the effects of topology-aware mapping heuristic using simplified network load model. Furthermore, we have tested the different SpMVM implementations on two large clusters with 3D Torus and Dragonfly topology. Our results show that the distributed SpMVM implementation that exploits matrix symmetry and hides communication yields the best value for the "CPU core hours" metric and significantly reduces data movement overheads.

97 MATHEMATICS AND COMPUTING↗

Optimizing blocking and nonblocking reduction operations for multicore systems: Hierarchical design and implementation

Many scientific simulations, using the Message Passing Interface (MPI) programming model, are sensitive to the performance and scalability of reduction collective operations such as MPI_Allreduce and MPI_Reduce. These operations are the most widely used abstractions to perform mathematical operations over all processes that are part of the simulation. In this work, we propose a hierarchical design to implement the reduction operations on multicore systems. This design aims to improve the efficiency of reductions by 1) tailoring the algorithms and customizing the implementations for various communication mechanisms in the system 2) providing the ability to configure the depth of hierarchy to match the system architecture, and 3) providing the ability to independently progress each of this hierarchy. Using this design, we implement MPI_Allreduce and MPI_Reduce operations (and its nonblocking variants MPI_Iallreduce and MPI_Ireduce) for all message sizes, and evaluate on multiple architectures including InfiniBand and Cray XT5. We leverage and enhance our existing infrastructure, Cheetah, which is a framework for implementing hierarchical collective operations to implement these reductions. The experimental results show that the Cheetah reduction operations outperform the production-grade MPI implementations such as Open MPI default, Cray MPI, and MVAPICH2, demonstrating its efficiency, flexibility and portability. On Infini-Band systems, with a microbenchmark, a 512-process Cheetah nonblocking Allreduce and Reduce achieves a speedup of 23x and 10x, respectively, compared to the default Open MPI reductions. The blocking variants of the reduction operations also show similar performance benefits. A 512-process nonblocking Cheetah Allreduce achieves a speedup of 3x, compared to the default MVAPICH2 Allreduce implementation. On a Cray XT5 system, a 6144-process Cheetah Allreduce outperforms the Cray MPI by 145%. The evaluation with an application kernel, Conjugate Gradient solver, shows that the Cheetah reductions speeds up total time to solution by 195%, demonstrating the potential benefits for scientific simulations.

Venkata, Manjunath Gorentla↗

An Asynchronous Real-time Co-simulation Platform for Modeling Interaction between Microgrids and Power Distribution Systems

This paper presents the modeling framework of an asynchronous, real-time co-simulation platform for modeling the interactions between microgrids and power distribution systems. Components of each microgrid are simulated on the OPAL-RT eMEGASIM platform so that electromagnetic transients of the inverter units are modeled at a time step of 100 microseconds. The 3-phase unbalanced distribution feeder that microgrids are connected to is simulated by using the OPAL-RT ePHASORSIM so that load transients, capacitor switching, and tap-changing events can be modeled. A MATLAB-based microgrid controller will interface controllable microgrid components through the Modbus communication. This co-simulation framework allows different microgrid controller logic to be developed and tested on a hardware-in-the-loop testbed considering both the inverter-level transient and the dynamic response of loads and utility equipment. Because the controller communicates with controllable devices via actual communication links, the impact of communication errors, delays, or denial-of-service can also be properly quantified.

Xie, Fuhong↗

Hybrid Quantum Networks with Discrete Polarizations and Continuous Quadrature Variables

Final Scientific/Technical Report for DOE Project DE-SC0022069. Quantum communication and computation systems have evolved along two largely independent paradigms: discrete-variable (DV) systems that encode information in qubits such as photon polarizations or photon-number states, and continuous-variable (CV) systems that encode information in optical field quadratures. Each approach offers distinct advantages—DVs provide low error rates and compatibility with single-photon platforms, while CVs support deterministic operations and efficient quantum state manipulation. A fundamental challenge for building a scalable Quantum Internet lies in interfacing these two regimes into a unified hybrid architecture that can coherently distribute and process quantum information across heterogeneous quantum nodes. This project aims to develop and demonstrate a hybrid optical quantum network that seamlessly integrates DV and CV systems. Specifically, we investigate a new class of hybrid entanglement between the discrete polarizations of single photons and the continuous quadrature variables of optical cat states, overcoming incompatibilities in existing DV–CV demonstrations. Using this new entanglement resource, the team investigates a multi-node hybrid quantum local area network (Q-LAN) testbed capable of DV–CV entanglement generation, swapping, and distribution across fiber links.

74 ATOMIC AND MOLECULAR PHYSICS↗

Development of a character, line and point display system

A compact graphics terminal for use as the input to a computerized medical records system is described. The principal mode of communication between the terminal and the records system is by checklists and menu selection. However, the terminal accepts short, handwritten messages as well as conventional alphanumeric input. The terminal consists of an electronic tablet, a display, a microcomputer controller, a character generator, and a refresh memory for the display. An Intel SBC 80/10 microcomputer controls the flow of information and a 16 kilobyte memory stores the point-by-point array of information to be displayed. A specially designed interface continuously generates the raster display without the intervention of the microcomputer.

Owen, E. W.↗

A multiprocessing architecture for real-time monitoring

A multiprocessing architecture for performing real time monitoring and analysis using knowledge-based problem solving techniques is discussed. To handle asynchronous inputs and perform in real time, the system consists of three or more separate processes which run concurrently on one or more processors and communicate via a message passing scheme. The Data Management Process gathers, compresses, scales and sends the incoming telemetry data to other tasks. The Inference Process consists of a proprietary high performance inference engine that runs at 1000 rules per second using telemetry data to perform real time analysis on the state and health of the Space Telescope. The multiprocessing architecture has been interfaced to a simulator and is able to process the incoming telemetry in real time.

Laffey, Thomas J.↗

SCAILET: An intelligent assistant for satellite ground terminal operations

NASA Lewis Research Center has applied artificial intelligence to an advanced ground terminal. This software application is being deployed as an experimenter interface to the link evaluation terminal (LET) and was named Space Communication Artificial Intelligence for the Link Evaluation Terminal (SCAILET). The high-burst-rate (HBR) LET provides 30-GHz-transmitting and 20-GHz-receiving, 220-Mbps capability for wide band communications technology experiments with the Advanced Communication Technology Satellite (ACTS). The HBR-LET terminal consists of seven major subsystems. A minicomputer controls and monitors these subsystems through an IEEE-488 or RS-232 protocol interface. Programming scripts (test procedures defined by design engineers) configure the HBR-LET and permit data acquisition. However, the scripts are difficult to use, require a steep learning curve, are cryptic, and are hard to maintain. This discourages experimenters from utilizing the full capabilities of the HBR-LET system. An intelligent assistant module was developed as part of the SCAILET software. The intelligent assistant addresses critical experimenter needs by solving and resolving problems that are encountered during the configuring of the HBR-LET system. The intelligent assistant is a graphical user interface with an expert system running in the background. In order to further assist and familiarize an experimenter, an on-line hypertext documentation module was developed and included in the SCAILET software.

Shahidi, A. K.↗

An Investigation of Interval Management Displays

NASA's first Air Traffic Management (ATM) Technology Demonstration (ATD-1) was created to transition the most mature ATM technologies from the laboratory to the National Airspace System. One selected technology is Interval Management (IM), which uses onboard aircraft automation to compute speeds that help the flight crew achieve and maintain precise spacing behind a preceding aircraft. Since ATD-1 focuses on a near-term environment, the ATD-1 flight demonstration prototype requires radio voice communication to issue an IM clearance. Retrofit IM displays will enable pilots to both enter information into the IM avionics and monitor IM operation. These displays could consist of an interface to enter data from an IM clearance and also an auxiliary display that presents critical information in the primary field-of-view. A human-in-the-loop experiment was conducted to examine usability and acceptability of retrofit IM displays, which flight crews found acceptable. Results also indicate the need for salient alerting when new speeds are generated and the desire to have a primary field of view display available that can display text and graphic trend indicators.

Swieringa, Kurt A.↗