Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Improving Thermal Stability of Perovskite Solar Cells by Suppressing Ion Migration Using Copolymer Grain Encapsulation

Thermal stability of organic–inorganic hybrid perovskites (OIHPs) remains as one of the critical challenges against the stable operation of perovskite solar cells (PSCs) in direct sunlight with elevated temperatures. Here, we show that the addition of a polystyrene-co-polyacrylonitrile (SAN) copolymer can significantly enhance thermal stability of OIHPs and improve the stability of the corresponding PSCs by suppressing the migration of organic cations in OHIP. The methylammonium lead iodide (MAPI) with SAN incorporated within the perovskite layer featured a superior thermal stability compared to pure MAPI without SAN, only displaying an average of 5–15% decrease in PCE even after continuous thermal aging for 24 h at 100 °C. The secondary ion mass spectrometry revealed that the thermal degradation of the pure MAPI was largely associated with MA+ out-migration. Conducting atomic force microscopy analysis further indicated that the incorporated SAN led to a suppression of ionic currents present at the grain boundaries of the perovskite film, which was understood by high immiscibility between SAN and MA+ components as confirmed by the experimentally estimated Flory–Huggins parameter between them. This study newly identifies a potential of using polymer grain encapsulation for enhancing thermal stability of OIHPs and their solar cell performance by suppressing the out-diffusion of cationic organic components.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Short-Range Order Tunes Optical Properties in Long-Range Disordered ZnSnN2-ZnO Alloy

Local site ordering offers a new paradigm for property control in functional materials. However, systems that exhibit a propensity for local order and global disorder are often challenging to characterize, and demonstrations of ordering-induced property tuning are few and far between. Here, we demonstrate that short-range ordering tunes the optical absorption edge in the long-range disordered alloy system (ZnSnN2)1-x(ZnO)2x at x = 0.25. We use combinatorial cosputtering to synthesize a set of thin-film samples spanning this alloy space. X-ray diffraction demonstrates lattice contraction as a function of alloy composition, confirming that a mixed-anion and -cation alloy has been synthesized. Using N and O K-edge X-ray absorption near-edge structure in conjunction with simulations of cation-disordered supercell structures, we find that samples exhibit octet-rule-breaking motifs around both anions. Upon annealing at an alloy composition of x = 0.25, X-ray absorption analysis suggests that local motif structure shifts toward octet-rule-conserving while long-range disorder is maintained. Spectroscopic ellipsometry reveals that local ordering increases the absorption edge energy at constant composition. Additionally, alloy-induced optical absorption edge tuning is demonstrated. This work paves the way toward property tuning with short-range ordering in (ZnSnN2)1-x(ZnO)2x and beyond.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Impact of Side Chain Chemistry on Lithium Transport in Mixed Ion–Electron-Conducting Polymers

We discuss how typical design strategies for mixed ion-electron conduction in polymers have focused on overall ionic conductivity, without specificity for anion vs. cation conduction. Here, we demonstrate that side chain chemistry can be used to control Li+ conductivity in semiconducting polymers. This design principle is significant for applications which require Li+ specific transport, such as Li-ion batteries. We show that a polythiophene functionalized with an ionic liquid side chain demonstrates higher conductivity and lithium transference than a more commonly studied ether-functionalized P3AT derivative. Poly(3-(6’-(N-methylimidazolium) hexyl)thiophene TFSI–) (P3HT-Im+TFSI–) can solvate and conduct ions up to salt concentrations of r=1.0 (where r = [moles of salt]/[moles of monomer]) while achieving ionic conductivity of ≈10–3 S/cm at 80°C, and a lithium transference number of 0.36. On the other hand, poly(3¬-(methoxyethoxyethoxymethyl) thiophene) (P3MEEMT) shows a peak conductivity of ≈10–5 S/cm at r=0.05 and 80°C, with near zero lithium transport. This work shows that multiple high dielectric moieties can be used to drive ion conduction in semiconducting polymers, but diffuse, cationic side chains such as imidazolium are preferred for Li-ion conduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ionic Dynamics of the Charge Carrier in Layered Solid Materials for Mg Rechargeable Batteries

Multivalent-ion batteries have attracted growing attention due to their high theoretical energy density that potentially outperforms Li-ion batteries. One of the critical challenges of realizing a multivalent-ion battery is the strong polarization that results in the sluggish intercalation of ions in the host lattice, which motivates a fundamental understanding of multivalent-ion dynamics in solid-state materials. In this contribution, we investigate the diffusion mechanisms of divalent ions in a novel Mg anode coating, BiOCl, using first-principles informed learning-on-the-fly molecular dynamics. Based on nanosecond-scale dynamics observations, we gained insights into the concerted diffusion mechanism of Mg cation site-to-site hopping facilitated by synchronous anion rotational motion. Furthermore, we compute the Mg-ion diffusion in additional candidate host structures screened from available layered materials space. Here, the results suggest the co-operative divalent cation-anion motion is likely a common phenomenon in layered oxyhalide structures. Our findings provide a new perspective on how to enhance multivalent-ion diffusion in layered materials.

25 ENERGY STORAGE↗
DOE OSTI2022

A Nearly Zero-Strain Li-Rich Rock-Salt Oxide with Multielectron Redox Reactions as a Cathode for Li-Ion Batteries

Li-rich oxide cathodes are drawing increasing attention as next-generation cathode materials for the development of high-energy-density Li-ion batteries due to their strikingly high capacities. However, transition-metal migration, irreversible structural phase transformations, and the irreversible release of oxygen are responsible for rapid capacity and voltage decay. This study reports a Li-rich cation-ordered rock-salt oxide Li x V 0.4 Ti 0.4 O 2 (LVTO, x = 0.97/1.2) with space group Fd$\bar{3}$m that delivers a high capacity of over 250 mAh g -1 and capacity retention up to 89% after 50 cycles. A comprehensive experimental analysis confirms that the capacity can be attributed to the reversible V 3+ /V 5+ multielectron cationic redox reactions and a minor contribution from reversible anionic redox reactions. Importantly, LVTO exhibits nearly zero-strain behavior upon (dis)charge cycling cycles, which is associated with reversible V migration from octahedral to tetrahedral sites. Here our results demonstrate that Li-rich rock-salt oxide LVTO could be a promising cobalt-free cathode material for Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Tuning the Radius Ratio to Enhance Thermoelectric Properties in the Zintl Compounds AM 2 Sb 2 (A = Ba, Sr; M = Zn, Cd)

Five novel Zintl phase solid solutions in the Ba 1–x Sr x Zn 2–y Cd y Sb 2 (0 ≤ x ≤ 0.13(1); 0 ≤ y ≤ 0.32(2)) system were successfully synthesized by the molten Pb metal-flux method, and the powder X-ray diffraction and single-crystal X-ray diffraction analyses proved that all five title compounds adopted the BaCu 2 S 2 -type phase having the orthorhombic Pnma space group (Z = 4, Pearson code oP20) with five crystallographically independent atomic sites. The previously studied BaCu 2 S 2 -type antimonides demonstrated a limited tolerance for doping in contrast to the CaAl 2 Si 2 -type antimonides. To understand the relatively narrower phase width and limited dopability of the title BaCu 2 S 2 -type phase than the CaAl 2 Si 2 -type phase in the overall Ba 1–x Sr x Zn 2–y Cd y Sb 2 system, the radius ratio of cations and anionic elements r + /r – for two structure types were thoroughly investigated. For the first time, the r + /r – ratio was identified as a critical factor for the phase selectivity: (1) r + /r – > 1 favored the BaCu 2 S 2 -type phase, and (2) r + /r – < 1 favored the CaAl 2 Si 2 -type phase. Further, we also revealed the structural transformation mechanism from the more widely observed CaAl 2 Si 2 -type phase to the title BaCu 2 S 2 -type phase as the relatively larger cationic elements were introduced to the system. A series of DFT calculations using the three hypothetical models indicated that a resonance peak near EF in the density of states curves was descended from the relatively flat band structure at several special symmetry points rationalizing the enhanced Seebeck coefficients of Ba 0.94(1) Sr 0.06 Zn 1.86(3) Cd 0.14 Sb 2 and Ba 0.96(1) Sr 0.04 Zn 1.68(2) Cd 0.32 Sb 2 . Electron localization function analysis rationalized the correlation between the polarity change of anionic Zn/Cd–Sb bonds and the charge carrier mobility on the anionic frameworks. Temperature-dependent thermoelectric properties were studied for the four title compounds, and the results proved that the Sr and Cd doping in the title Ba 1–x Sr x Zn 2–y Cd y Sb 2 system successfully enhanced the ZT values through the increased Seebeck coefficients and the reduced total thermal conductivities.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Impact of Chiral Symmetry Breaking on Spin-Texture and Lone Pair Expression in Chiral Crystals of Hybrid Antimony and Bismuth Halides

Chiral organic building blocks can be incorporated into hybrid organic-inorganic metal-halide crystalline semiconductors so as to control and impact the interconversion between light, charge, and spin. Here, we report a series of hybrid antimony and bismuth halide materials of the general formula MBA 4 B 2 X 10 (B = Sb 3+ , Bi 3+ ; X = Br - , I - ) and study how chiral symmetry breaking imposed by the templating organic chiral methylbenzylammonium (MBA) cations induces symmetry breaking within the inorganic sublattice and leads to a unique spin-texture. The chiral MBA cations introduce two structural modifications to the metal-halide sublattice that consists of isolated edge-sharing dimers of B 2 X 10 octahedra: (1) the dimers have a chiral spatial arrangement with respect to one another and (2) there is an asymmetric distortion of the two subunits within the individual dimers with a higher distortion caused by strong stereochemical activity of the Sb 5s 2 lone pair electrons. The structural distortions and chiral arrangement result in circular dichroism (CD) at the band edge of the inorganic framework with dissymmetry factors in the range of 10 -4 . Chiral spin-splitting of the inorganic states, caused by breaking of the inversion symmetry and large spin-orbit coupling, is studied via density functional theory (DFT), and a multiband effective mass theory was developed that links the DFT-derived spin-splitting of helical character (i.e., spin expectation value not perpendicular to the crystal momentum) to the observed CD. Furthermore, we also find broad red photoluminescence from the MBA 4 Sb 2 Br 10 compounds, which we attribute to self-trapped excitonic emission driven by the large distortion due to the lone pair expression.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Predictive Design of Hybrid Improper Ferroelectric Double Perovskite Oxides

The computational design of suitable multiferroic double perovskite oxides requires finding materials that exhibit sizable polarization, magnetization, and coupling between them. Oxides with the chemical formula of AA'BB'O 6 with building blocks of ABO 3 single perovskite oxides in centrosymmetric Pnma symmetry are strong candidates that have been reported to satisfy such criteria. The system lowers to noncentrosymmetric, polar P2 1 symmetry if A/A' layered and B/B' rocksalt cation orderings are imposed. A detailed compositional search over a variety of chemical spaces followed by evaluating their polarization may lead to the identification of more of these compounds with ferroelectric ordering. The standard density functional theory practices to estimate polarization within the Berry phase formalism require the systems to be perfectly insulating. The number of compounds that can be evaluated using this method is therefore limited. In this work, we introduce a predictive learning strategy based on importance sampling to build a series of machine learning models using results from first-principles simulations to predict polarization and the corresponding switching barrier. The geometry-driven features related to charge states and cationic radii play key roles in predicting the switching barrier with complementary contributions from the key structural mode-based order parameters. These modes become important to draw reasonable predictions of polarization components from machine learning models. In conclusion, our predictive models identify candidates with high polarizations and low switching barriers from a pool of double perovskite oxides, suitable for future investigation for their potential applications in spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electrochemistry in the Large Tunnels of Lithium Postspinel Compounds

Lithium spinels (Li MM 'O 4 ) are an important class of mixed-cation materials that have found uses in batteries, catalysis, and optics. Postspinels are a series of related framework structures with the AMM 'O 4 host composition that are formed with larger A -site cations, typically under high pressure. Postspinels have one-dimensional tunnel structures with pores that are larger than those in spinel and triangular in cross-section, but they are relatively unexplored as intercalation electrodes. While lithium postspinels have been previously found to be thermodynamically stable only at high pressures, we have identified a synthetic pathway that produces the lithium-containing materials at ambient pressure using an ion-exchange process from the corresponding sodium postspinels. Here, in this work, we report the synthesis and a survey of the electrochemical properties of 10 new lithium CaFe 2 O 4 -type postspinel compounds where M = Mn 3+ , V 3+ , Cr 3+ , Rh 3+ , Fe 2+ , Mg 2+ , Co 2+ and M ' = Ti 4+ and/or Sn 4+ . Although complete delithiation is not achieved during electrochemical cycling, many of the lithium postspinels have substantial charge storage capacity in Li battery cells owing to the ability of the large framework tunnels to accommodate more than one lithium ion per formula unit. Multiple redox couples are accessed for LiMnSnO 4 , Li 0.96 Mn 0.96 Sn 1.04-x Ti x O 4 , Li 0.96 V 0.96 Ti 1.04 O 4 , Li 0.96 Cr 0.96 Ti 1.04 O 4 , and LiFe 0.5 Ti 1.5 O 4 . Compositions with moderate or poor lithium cyclability are also discussed for comparison. Redox mechanisms and trends are identified by comparing this new redox-active framework to related spinels, ramsdellites, and 'Na 0.44 MnO 2 ' structures, and from density functional theory (DFT) electronic structures. Operando diffraction shows complex structural responses to lithium insertion and extraction in this postspinel framework. A DFT framework was proposed to identify promising lithium postspinel phases that could be accessed metastably under ambient pressure conditions and to assess their stability to lithium insertion and extraction. This work suggests that CaFe 2 O 4 -type hosts are a promising new class of lithium-ion energy storage materials.

25 ENERGY STORAGE↗
DOE OSTI2024

Unleashing the Potential of Fast Charging Batteries: Leveraging Anion Redox Chemistry in Ni- and Co-Free Cathodes

Designing Li-ion battery cathodes free from critical raw materials such as Co and Ni has a huge technological and societal impact. Though anion redox-based Li-rich oxide cathodes allow designing Co and Ni free cathode compositions, the Li-rich oxides witnessed voltage fade, voltage hysteresis, and irreversible oxygen release despite their high capacity. Conversely, anion redox through highly covalent chalcogenides (S/Se) is emerging due to the improved covalency between metal d and ligand p bands. Here, we investigate the tuning of multi-chalcogen (S/Se) p-band and redox-active metal d-band in a model Li-rich chalcogen composition Li 1.13 Ti 0.57 Fe 0.3 S 2-y Se y (y = 0 - 1) through in-depth electrochemical, X-ray spectroscopy, and DFT-based electronic structure investigations. Introducing the appropriate amount of Se p band character in anion redox sulfides increases interlayer distance and metal - ligand covalency without modifying the original crystal structure, promoting significant electrochemical reversibility through mixed anionic (Se 2- /Se n- , S 2- /S n- , wherein n<2) and cationic (Fe 2+ /Fe 3+ ) redox reactions. Here we show the detailed Fe, S, and Se redox contributions during Li insertion/extraction through X-ray Absorption (XAS) and Hard X-ray Photoemission Spectroscopy (HAXPES) measurements. The orbital tuning approach improves rate capability for more than 10 C charge-discharge rate, exhibiting more than 50% of its original capacity obtained at C/20 rate. The buffer cation in the lattice (Ti 4+ ) remains electrochemically inactive even after significant Se p-band introduction in the sulfide framework. Overall, this work takes advantage of multi-anion redox chemistry to uncover practically demanding fast charging-discharging characteristics in intercalation cathodes. The obtained knowledge of this design can be extended to other oxide and chalcogen cathodes for high performance Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Ether Cleavage Decreases the Ion Exchange Capacity of Anion Exchange Membranes

Anion exchange membranes (AEMs) are integral to fuel cells and water electrolysis systems but suffer from poor durability under alkaline conditions. Ether cleavage is an important failure pathway of poly(arylene ether)-based AEMs that compromises both mechanical stability and ion transport. While this degradation pathway is often studied in terms of polymer fragmentation, the role of newly formed hydrophilic groups has been largely overlooked. Here, we show that polymer scission leads to reduced mechanical rigidity, while the introduction of hydrophilic groups partially mitigates this loss. Under alkaline conditions, phenoxide groups formed during ether cleavage neutralize the polymer cations, leading to a previously unreported loss of ion exchange capacity (IEC). This IEC loss mechanism exacerbates the reduction in ionic conductivity, emphasizing the severity of ether cleavage as a degradation pathway. Recognizing that ether cleavage introduces significant chemical changes beyond polymer fragmentation provides critical insights into its interplay with other degradation mechanisms, such as the direct reduction of cationic sites by E2 and S N 2, and provides molecular-level interpretations for the concurrent effects of polymer scission and increased hydrophilicity on membrane performance.

crystal cleavage↗
DOE OSTI2019

Probing Mg Migration in Spinel Oxides

Mg batteries utilizing oxide cathodes can theoretically surpass the energy density of current Li-ion technologies. The absence of functional devices so far has been ascribed to impeded Mg 2+ migration within oxides, which severely handicaps intercalation reactions at the cathode. Broadly, knowledge of divalent cation migration in solid frameworks is surprisingly deficient. In this paper, we present a combined experimental and theoretical study of Mg migration within three spinel oxides, which reveal critical features that influence it. Experimental activation energies for a Mg 2+ hop to an adjacent vacancy, as low as ~0.6 eV, are reported. These barriers are low enough to support functional electrodes based on the intercalation of M g2+ . Subsequent electrochemical experiments demonstrate that significant demagnesiation is indeed possible, but the challenges instead lie with the chemical stability of the oxidized states. Our findings enhance the understanding of cation transport in solid structures and renew the prospects of finding materials capable of high density of energy storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The Role of Secondary Particle Structures in Surface Phase Transitions of Ni-Rich Cathodes

Nanometer-thick reconstruction layers on layered cathode surfaces have been widely observed on both pristine and cycled materials. However, the mechanisms of reconstruction and the role that these structures play in electrochemical performance are not fully understood. From a crystallographic perspective, such surface reconstruction layers result from cation site-mixing between Li and transition-metal ions, but it remains far from clear as to what the critical factors are that control such cation mixing for various cathode chemistries. In this paper, we report observations on surface transformations during cycling of a Ni-rich cathode-oxide that are governed by direct contact with the liquid electrolyte. Specifically, within a secondary particle, the three-dimensional hierarchical aggregate of primary particles leads to the formation of grain boundaries of different characteristics, including open grain boundaries that allow the permeation of liquid electrolyte, and closed grain boundaries that exclude liquid electrolyte penetration. Upon battery cycling, surfaces in direct contact with the liquid electrolyte showed a surface reconstruction layer while the surfaces that did not have contact with the electrolyte showed no such reconstructions. In addition, the critical role of oxygen in reconstruction of grain boundaries is demonstrated, and the unexpected oxygen depletion at twin boundaries result in severe phase transitions. The present work provides further insights into phase transitions at solid-solid and solid-liquid interfaces within secondary cathode particles and suggests strategies for mitigating surface/interfacial degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structure and Shape of Surface-Mediated Assembly of Surfactants

Achieving controls on the self-assembly of cationic and block copolymer micelles has significant implications for advancing novel material systems for energy, environmental, and biological applications and for tuning fluid flow behavior in subsurface geologic environments. While it is known that the aggregation of micelles is influenced by the composition of the surrounding fluid, the influence of a solid interface has been less explored. In this study, we probe the organization of cetyltrimethylammonium bromide (CTAB) micelles in the absence and presence of the Pluronic P123 block copolymer and quartz substrate using transmission and grazing-incidence small-angle X-ray scattering measurements and classical molecular dynamics (MD) simulations. In the absence of the quartz interface, CTAB with and without P123 molecules assemble as ellipsoid core–shell micelles. Densification of the core on adding P123 is noted from the decrease in the core radius from 15.9 to 14.6 Å. Here, the presence of a quartz substrate causes the micelles to elongate, which is noted by the emergence of a power-law slope in the low q region (<0.02 Å –1 ). Moreover, in the presence of both P123 and the quartz substrate, the micelle shape changes from ellipsoid core–shell to cylindrical core–shell, and a significantly higher number of aggregates are formed. The higher number of aggregates, and faster aggregation kinetics are linked to the organization of the solvent structures as noted from the MD simulations. These findings demonstrate the effects of adding a block copolymer and including a quartz substrate on the self-assembly of cationic (CTAB) micelles, which can be used to inform the design of functional material systems that harness surfactant chemistries.

42 ENGINEERING↗
DOE OSTI2020

Molecular Dynamics Simulation of the Structures, Dynamics, and Aggregation of Dissolved Organic Matter

Dissolved organic matter (DOM) plays a significant role in the transport and transformation of pollutants in the aquatic environment. However, the experimental characterization of DOM has been limited mainly to bulk properties, and the molecular-level interactions among various components of DOM remain to be fully characterized. In this study, we use molecular dynamics (MD) simulations to probe the structural properties of model DOM systems at atomic detail. The 200 ns simulations, validated by available experimental data, reveal processes and mechanisms by which chemical species (cations, peptides, lipids, lignin, carbohydrates, and some low-molecular-weight aliphatic and aromatic compounds) aggregate to form complex DOM. The DOM aggregates are dynamic, consisting of a hydrophobic core and amphiphilic exterior. The lipid tails and other hydrophobic fragments form the core, with hydrophilic and amphiphilic groups exposed to water, making DOM accessible to both polar and nonpolar species. Thus, the lipid component acts as a nucleator, whereas cations (especially Ca 2+ ) connect the molecular fragments on the surface by coordinating with the O-containing functional groups of DOM. The structural details revealed here provide new insights including surface accessible atoms, overall assemblage, and interactions among the molecules of DOM for understanding the kinetics and mechanisms through which DOM interacts with metal and other contaminants.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Electrochemical Salt Wasteform Development: A Review of Salt Treatment and Immobilization Options

Electrochemical reprocessing, also referred to as pyroprocessing, is a technique for recycling actinides from used nuclear fuel (UNF) to produce fuel for future reactors. Here, UNF is dissolved in a molten salt (e.g., LiCl-KCl eutectic) within an electrorefiner. After UNF dissolution, fission products are released into the electrolyte salt and converted to chlorides. This paper discusses wasteform options for processing the base electrolyte salt with the fission product salts as well as just the rare-earth fission products (as RECl 3 , REOCl, or REO x ) with the intent of finding optimal methods for reducing total waste salt volumes or partitioning the salt for alternate wasteform options. Furthermore, two of the more detailed partitioning options discussed herein include halide removal from the salt (dehalogenation), which accounts for more than half of the salt on a molar basis, and RE fission product removal for wasteforms with high-RE loadings. Wasteform properties are compared with emphasis on wasteform volume starting from a given amount of (1) total salt cations or (2) RE cations. Comparisons are also made of wasteform chemical durabilities, with the data available from like testing methods. A main conclusion from this work is the justification of subsequent salt processing after electrorefiner operations for achieving significant wasteform volume reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Determination of the N–H Bond Dissociation Free Energy in a Pyridine(diimine)molybdenum Complex Prepared by Proton-Coupled Electron Transfer

The pyridine(diimine) molybdenum bis(imido) complex, ( iPr PDI)Mo(=NTol) 2 (Tol = 4-methylphenyl) was synthesized by addition of two equivalents of 4-methylphenylazide to a corresponding molybdenum benzene derivative, ( iPr PDI)Mo(η 6 -C 6 H 6 ) ( iPr PDI = 2,6-(2,6-iPr 2 C 6 H 3 N=CMe) 2 C 5 H 3 N). Protonation of ( iPr PDI)Mo(=NTol) 2 with 2,6-lutinidum triflate yielded a cationic molybdenum amido complex, [( iPr PDI)Mo(NHTol)(=NTol)][OTf], which was further transformed into the neutral molybdenum amido complex, ( iPr PDI)Mo(NHTol)(=NTol) by reduction with zinc powder. A series of spectroscopic, synthetic and pK a determination studies along with electrochemical measurements by the protonation-reduction pathway were used to establish an N–H bond dissociation free energy (BDFE) between 65-69 kcal/mol for the molybdenum imido-amido compound, ( iPr PDI)Mo(NHTol)(=NTol). Full molecule DFT studies provided a computed value of 61 kcal/mol. By contrast, reduction of ( iPr PDI)Mo(=NTol) 2 with KC 8 afforded the corresponding anionic molybdenum complex, K[( iPr PDI)Mo(=NTol) 2 ] that has a potassium cation intercalated with the pyridine and the tolyl groups. Protonation of K[( iPr PDI)Mo(=NTol) 2 ] with the weak amidinium acids [TBD(H)][BArF 24 ] (TBD = triazabicyclodecene, BArF 24 = B[3,5-(CF 3 ) 2 C 6 H 3 ] 4 ) also produced the neutral molybdenum amido complex, ( iPr PDI)Mo(NHTol)(=NTol). Measurement of the pKa and oxidation potential of K[( iPr PDI)Mo(=NTol) 2 ] provided a range of 69-73 kcal/mol for the N–H BDFE of ( iPr PDI)Mo(NHTol)(=NTol), in good agreement with the protonation-reduction route and completing the square scheme. The similar pK a and redox potentials obtained from each pathway demonstrate that both sequences are energetically feasible for PCET events. This study on the determination of N–H BDFE of the molybdenum amido complex renders fundamental insight into the N 2 reduction cycle by proton-coupled electron transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗