SEARCH · Engineering Papers

Results for “carbon paper”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

All sources NASA NTRS DOE OSTI

NASA NTRS2019

Freshwater Requirements of Large-Scale Bioenergy Plantations for Limiting Global Warming to 1.5°C

Limiting mean global warming to well below 2 °C will probably require substantial negative emissions (NEs) within the 21st century. To achieve these, bioenergy plantations with subsequent carbon capture and storage (BECCS) may have to be implemented at a large scale. Irrigation of these plantations might be necessary to increase the yield, which is likely to put further pressure on already stressed freshwater systems. Conversely, the potential of bioenergy plantations (BPs) dedicated to achieving NEs through CO2 assimilation may be limited in regions with low freshwater availability. This paper provides a first-order quantification of the biophysical potentials of BECCS as a negative emission technology contribution to reaching the 1.5 °C warming target, as constrained by associated water availabilities and requirements. Using a global biosphere model, we analyze the availability of freshwater for irrigation of BPs designed to meet the projected NEs to fulfill the 1.5 °C target, spatially explicitly on areas not reserved for ecosystem conservation or agriculture. We take account of the simultaneous water demands for agriculture, industries, and households and also account for environmental flow requirements (EFRs) needed to safeguard aquatic ecosystems. Furthermore, we assess to what extent different forms of improved water management on the suggested BPs and on cropland may help to reduce the freshwater abstractions. Results indicate that global water withdrawals for irrigation of BPs range between ~400 and ~3000 km(exp 3) yr(exp -1), depending on the scenario and the conversion efficiency of the carbon capture and storage process. Consideration of EFRs reduces the NE potential significantly, but can partly be compensated for by improved on-field water management.

Stenzel, Fabian↗

NASA NTRSDate not supplied

Highly Thermally Conductive Hybrid Carbon Fiber Polymer Composite for Radiator Application

Carbon fiber (CF) reinforced polymer composites have been used for aerospace structures because they have low mass, high specific strength, high specific stiffness, and low life-cycle maintenance compared to aluminum alloys. However, due to their relatively low thermal conductivity, pristine CF polymer composites fail to provide effective heat flow for certain applications such as heat exchange systems and radiators. The technology described in this paper provides novel CF polymer composites that possess high thermal conductivity by incorporating pyrolytic graphite sheets (PGS). The thermal conductivities of novel hybrid PGS/CF polymer composites were measured to be about 10 to 30 times higher than that of pristine CF polymer composite, and about two times higher than that of aluminum alloy 6061. This new material with sufficient thermal conductivity is applicable to composite radiators of heat exchange systems.

Thermal Conductivity↗

DOE OSTI2023

A review of in situ/operando studies of heterogeneous catalytic hydrogenation of CO 2 to methanol

Repurposing CO 2 into chemicals, one of the Carbon Dioxide Removal (CDR) strategies, still faces significant challenges in conversion and energy efficiency due to the lack of effective catalysts and processes. Fundamental understanding through in situ/operando investigations of the reaction mechanisms and catalyst structures is pivotal for developing the efficient catalysts. This paper reviews the past and recent in situ/operando studies of methanol synthesis from heterogeneous CO 2 hydrogenation over a few typical catalysts including Cu-based, oxide-based, and noble-metal-based catalysts. With the development of high-pressure reactors, in situ/operando IR, X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), neutron diffraction and imaging have been used to reveal the surface intermediates and structures of working catalysts under CO 2 hydrogenation conditions. On the one hand, the combined operando techniques shed light on working mechanisms for some catalytic systems. On the other hand, due to the complexity of selective CO 2 hydrogenation reaction and limited sensitivity of current accessible operando techniques to the surface structure of catalysts, it is still murky about the exact nature of the active sites at the surface/interface and how different sites promote different reaction paths. Furthermore, it is concluded that new methodologies for differentiating signals from different sites, and the development of surface-sensitive techniques for high pressure reactions are needed for providing structural descriptors of highly active and selective CO 2 conversion catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Formic acid catalyzed isomerization and adduct formation of an isoprene-derived Criegee intermediate: experiment and theory

Isoprene is the most abundant non-methane hydrocarbon emitted into the Earth's atmosphere. Ozonolysis is an important atmospheric sink for isoprene, which generates reactive carbonyl oxide species (R 1 R 2 C[double bond, length as m-dash]O + O – ) known as Criegee intermediates. This study focuses on characterizing the catalyzed isomerization and adduct formation pathways for the reaction between formic acid and methyl vinyl ketone oxide (MVK-oxide), a four-carbon unsaturated Criegee intermediate generated from isoprene ozonolysis. syn-MVK-oxide undergoes intramolecular 1,4 H-atom transfer to form a substituted vinyl hydroperoxide intermediate, 2-hydroperoxybuta-1,3-diene (HPBD), which subsequently decomposes to hydroxyl and vinoxylic radical products. In this paper, we report direct observation of HPBD generated by formic acid catalyzed isomerization of MVK-oxide under thermal conditions (298 K, 10 torr) using multiplexed photoionization mass spectrometry. The acid catalyzed isomerization of MVK-oxide proceeds by a double hydrogen-bonded interaction followed by a concerted H-atom transfer via submerged barriers to produce HPBD and regenerate formic acid. The analogous isomerization pathway catalyzed with deuterated formic acid (D2-formic acid) enables migration of a D atom to yield partially deuterated HPBD (DPBD), which is identified by its distinct mass (m/z 87) and photoionization threshold. In addition, bimolecular reaction of MVK-oxide with D 2 -formic acid forms a functionalized hydroperoxide adduct, which is the dominant product channel, and is compared to a previous bimolecular reaction study with normal formic acid. Complementary high-level theoretical calculations are performed to further investigate the reaction pathways and kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Characterizing and communicating uncertainty: lessons from NASA’s Carbon Monitoring System

Navigating uncertainty is a critical challenge in all fields of science, especially when translating knowledge into real-world policies or management decisions. However, the wide variance in concepts and definitions of uncertainty across scientific fields hinders effective communication. As a microcosm of diverse fields within Earth Science, NASA’s Carbon Monitoring System (CMS) provides a useful crucible in which to identify cross-cutting concepts of uncertainty. The CMS convened the Uncertainty Working Group (UWG), a group of specialists across disciplines, to evaluate and synthesize efforts to characterize uncertainty in CMS projects. This paper represents efforts by the UWG to build a heuristic framework designed to evaluate data products and communicate uncertainty to both scientific and non-scientific end users. We consider four pillars of uncertainty: origins, severity, stochasticity versus incomplete knowledge, and spatial and temporal autocorrelation. Using a common vocabulary and a generalized workflow, the framework introduces a graphical heuristic accompanied by a narrative, exemplified through contrasting case studies. Envisioned as a versatile tool, this framework provides clarity in reporting uncertainty, guiding users and tempering expectations. Beyond CMS, it stands as a simple yet powerful means to communicate uncertainty across diverse scientific communities.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Direct ink write multi-material printing of PDMS-BTO composites with MWCNT electrodes for flexible force sensors

Here, with recent advances of additive manufacturing technology, direct ink write (DIW) printing has allowed to incorporate multi-material printing of various materials with freedom of design and complex geometric shapes to complete functional sensors in a one-step fabrication. This paper introduces the use of DIW 3D printing of polydimethylsiloxane (PDMS) with barium titanate (BTO) filler as stretchable composites with tunable piezoelectric properties that can be used for force sensors applications. To improve the bonding between stretchable piezoelectric composites and electrodes, multi-walled carbon nanotubes was included in the fabrication of electrodes at a fixed ratio of 11 wt. %. The alignment of the BTO dipoles was achieved through corona poling method, which applies an electric charge on the surface layer of the functional material, aligning the dipoles in the desired direction and thus gaining the piezoelectricity. Different BTO mixing ratios (10–50 wt. %) were evaluated in order to obtain tunable piezoelectric properties and compare the sensitivity with respect their elastic properties. Tensile testing and piezoelectric testing were carried out to characterize mechanical and piezoelectric properties. Results showed that fabricated PDMS with 50 wt. % BTO gave the highest piezoelectric coefficient (d 33 ) of 11.5 pC N -1 and with an output voltage of 385 mV under compression loading of >200 lbF. This demonstrates feasibility of using multi-material DIW printing to fabricate piezoelectric force sensors with integrated electrodes in one-step without compromising the flexibility of the material.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Developing Frequency Stability Constraint for Unit Commitment Problem Considering High Penetration of Renewables

As zero-carbon electricity systems become the trend of future grid, the system inertia provided by conventional synchronous generators (SGs) keeps decreasing. The resultant lower system inertia will inevitably cause frequency stability problem, especially in the first few seconds following disturbance. To tackle this challenge, this paper proposes a frequency stability constraint for power systems unit commitment problem by considering the fast frequency responses (FFRs) from inverter-based resources (IBRs). Our developed frequency stability constraint is grounded on an analytical frequency nadir estimation framework that considers both SG and IBR dynamics. The accuracy of our frequency nadir estimation framework is validated by most severe N-1 contingency simulation result in a real island system. Then, the adaptive inertia frequency stability constraint is derived by performing sensitivity analysis with our frequency nadir estimation framework. Finally, we demonstrate the effectiveness of our developed frequency stability constraint with one year day-ahead unit commitment results of the island system.

fast frequency response↗

NASA NTRS1986

Lessons learned from the DC-10 carbon-epoxy rudder program

With the DC-10 carbon-epoxy rudder, the Douglas Aircraft Company achieved one of the greatest percentage weight savings associated with composite structures. Apart from minor damage from lightning strikes, the 15 rudders put into service have experienced virtually trouble-free operation for about a decade. This paper explains why a multirib, postbuckled skin design was used for the DC-10 composite rudder, how it was justified, and how it would have compared with more conventional sandwich design concepts. Special attention is devoted to the reasons why, for such postbuckled designs, it is better to allow the skin to wrinkle and unload itself than to reinforce it and make it resist buckling until some higher load level is attained. With minor changes in the manufacturing technique, this design concept is ideal for the control surfaces on many aircraft. The paper includes suggestions on how to make even better composite control surfaces in the future.

Hart-Smith, L. J.↗

NASA NTRS1999

Coupling of Carbon Nanotubes to Metallic Contacts

The modeling of carbon nanotube-metal contacts is important from both basic and applied view points. For many applications, it is important to design contacts such that the transmission is dictated by intrinsic properties of the nanotube rather than by details of the contact. In this paper, we calculate the electron transmission probability from a nanotube to a free electron metal, which is side-contacted. If the metal-nanotube interface is sufficiently ordered, we find that k-vector conservation plays an important role in determining the coupling, with the physics depending on the area of contact, tube diameter, and chirality. The main results of this paper are: (1) conductance scales with contact length, a phenomena that has been observed in experiments and (2) in the case of uniform coupling between metal and nanotube, the threshold value of the metal Fermi wave vector (below which coupling is insignificant) depends on chirality. Disorder and small phase coherence length relax the need for k-vector conservation, thereby making the coupling stronger.

Anantram, M. P.↗

NASA NTRS2007

An Update on the Lithium-Ion Cell Low-Earth-Orbit Verification Test Program

A Lithium-Ion Cell Low-Earth-Orbit Verification Test Program is being conducted by NASA Glenn Research Center to assess the performance of lithium-ion (Li-ion) cells over a wide range of low-Earth-orbit (LEO) conditions. The data generated will be used to build an empirical model for Li-ion batteries. The goal of the modeling will be to develop a tool to predict the performance and cycle life of Li-ion batteries operating at a specified set of mission conditions. Using this tool, mission planners will be able to design operation points of the battery system while factoring in mission requirements and the expected life and performance of the batteries. Test conditions for the program were selected via a statistical design of experiments to span a range of feasible operational conditions for LEO aerospace applications. The variables under evaluation are temperature, depth-of-discharge (DOD), and end-of-charge voltage (EOCV). The baseline matrix was formed by generating combinations from a set of three values for each variable. Temperature values are 10 C, 20 C and 30 C. Depth-of-discharge values are 20%, 30% and 40%. EOCV values are 3.85 V, 3.95 V, and 4.05 V. Test conditions for individual cells may vary slightly from the baseline test matrix depending upon the cell manufacturer s recommended operating conditions. Cells from each vendor are being evaluated at each of ten sets of test conditions. Cells from four cell manufacturers are undergoing life cycle tests. Life cycling on the first sets of cells began in September 2004. These cells consist of Saft 40 ampere-hour (Ah) cells and Lith ion 30 Ah cells. These cells have achieved over 10,000 cycles each, equivalent to about 20 months in LEO. In the past year, the test program has expanded to include the evaluation of Mine Safety Appliances (MSA) 50 Ah cells and ABSL battery modules. The MSA cells will begin life cycling in October 2006. The ABSL battery modules consist of commercial Sony hard carbon 18650 lithium-ion cells configured in series and parallel combinations to create nominal 14.4 volt, 3 Ah packs (4s-2p). These modules have accumulated approximately 3000 cycles. Results on the performance of the cells and modules will be presented in this paper. The life prediction and performance model for Li-ion cells in LEO will be built by analyzing the data statistically and performing regression analysis. Cells are being cycled to failure so that differences in performance trends that occur at different stages in the life of the cell can be observed and accurately modeled. Cell testing is being performed at the Naval Surface Warfare Center in Crane, IN.

Reid, Concha M.↗

NASA NTRS2007

Engineered Structured Sorbents for the Adsorption of Carbon Dioxide and Water Vapor from Manned Spacecraft Atmospheres: Applications and Modeling 2007/2008

In NASA s Vision for Space Exploration, humans will once again travel beyond the confines of earth s gravity, this time to remain there for extended periods. These forays will place unprecedented demands on launch systems. They must not only blast out of earth s gravity well as during the Apollo moon missions, but also launch the supplies needed to sustain a larger crew over much longer periods. Thus all spacecraft systems, including those for the separation of metabolic carbon dioxide and water from a crewed vehicle, must be minimized with respect to mass, power, and volume. Emphasis is also placed on system robustness both to minimize replacement parts and ensure crew safety when a quick return to earth is not possible. This paper describes efforts to improve on typical packed beds of sorbent pellets by making use of structured sorbents and alternate bed configurations to improve system efficiency and reliability. The development efforts described offer a complimentary approach combining testing of subscale systems and multiphysics computer simulations to characterize the regenerative heating substrates and evaluation of engineered structured sorbent geometries. Mass transfer, heat transfer, and fluid dynamics are included in the transient simulations.

Knox, James C.↗

DOE OSTI2020

Production and characterization of extracellular cellulases from a native strain of Trichoderma harzianum using wheat straw from the Mexicali valley as the carbon source. Producción y caracterización de celulasas Extracelulares a partir de cepa nativa de Trichoderma harzianum usando como fuente de Carbono paja de trigo del valle de Mexicali

The purpose of this study was to produce cellulase enzyme from a native strain Trichoderma harzianum, isolated from crop soil. Cellulase production was carried out by two different methods of fermentation, submerging and solid state fermentation. Mandels mineral medium was used as a source of nitrogen and ammonium sulfate. Dry and ground wheat straw was used in fermentation as a carbon source. Cellulase activity was determined using the 3,5-dinitrosalicylic acid (DNS) method. The results showed that wheat straw has the potential to be used as a substrate in the production of cellulases. Trichoderma harzianum showed enzymatic activity of 0.125 FPU / ml (filter paper units) and 1. 35 U / ml CMC (carboxymethyl cellulose units) by solid state fermentation (FSS) after 96 hours of fermentation. The optimum pH for the two substrates was determined by testing with citrate buffers (pH 4 to 6), phosphates (pH 6 to 7) and tris-HCL (pH 8 to 9). To determine the optimum temperature the range of 30 ° C to 80 ° C was investigated. Storage tests were performed every seven days over a period of 6 weeks. The optimum activity pH on paper and CMC was found to be 6. The optimum activity temperature is 70 ° C for PF and 80 ° C for CMC. El propósito de este estudio fue producir enzima celulasa a partir de una cepa nativa Trichoderma harzianum, aislada de suelo de cultivo. La producción de celulasa se realizó por dos métodos diferentes de fermentación, sumergida y fermentación en estado sólido. Se utilizó medio mineral Mandels y como fuentes de nitrógeno urea y sulfato de amonio. Se utilizó paja de trigo seca y molida en las fermentaciones como fuente de carbono. La actividad de la celulasa se determinó por medición de azúcares reductores al papel filtro y a la carboximetilcelulosa usando el método del ácido 3,5- dinitrosalicílico (DNS). Los resultados mostraron que la paja de trigo tiene el potencial para usarse como sustrato en la producción de celulasas. Trichoderma harzianum mostró actividad enzimática de 0.125 FPU/ml (unidades de papel filtro) y 1.35 U/ml a la CMC (unidades de carboximetilcelulosa) por fermentación en estado sólido (FSS) después de 96 horas de fermentación. El pH óptimo para los dos sustratos se determinó realizando pruebas con buffers de citratos (pH 4 a 6), de fosfatos (pH 6 a 7) y tris- HCL (pH 8 a 9). Para la determinación de la temperatura óptima se manejó el rango de 30°C a 80°C. Las pruebas de almacenamiento se realizaron cada siete días en un periodo de 6 semanas. Se encontró que el pH óptimo de actividad en papel y CMC es de 6. La temperatura óptima de actividad es de 70°C para PF y de 80°C para CMC.

09 BIOMASS FUELS↗

DOE OSTI2023

Developing Frequency Stability Constraint for Unit Commitment Problem Considering High Penetration of Renewables: Preprint

As zero-carbon electricity systems become the trend of future grid, the system inertia provided by conventional synchronous generators (SGs) keeps decreasing. The resultant lower system inertia will inevitably cause frequency stability problem, especially in the first few seconds after disturbance. To address this challenge, this paper proposes a frequency stability unit commitment constraint considering the fast frequency responses (FFRs) from inverter-based resources (IBRs). Thus, this paper first analyzes a frequency nadir differential equation that considers SG governor model and three kinds of FFR provided by IBRs. A system frequency nadir estimation framework is developed with consideration of various conventional SG and IBR models. The accuracy of this frequency estimation framework is validated by largest N-1 contingency simulation result of a real island system. Then, the adaptive inertia frequency stability unit commitment constraint is derived from sensitivity analysis method. Finally, we demonstrate the effectiveness of our developed constraints with one year day-ahead unit commitment results of the real island system.

fast frequency response↗

DOE OSTI2022

New proposed ITER divertor design using carbon insert on tungsten to mitigate ELMs and secondary radiation effects on nearby components

Abstract Building a successful device for the magnetic fusion energy production is a great challenge. ITER is an international project of the tokamak based magnetic fusion design being developed for the demonstration of the feasibility of thermonuclear technologies for future realization of successful commercial fusion energy. A key obstacle to a successful magnetic fusion energy production is however, the performance during abnormal events including plasma disruptions and edge-localized modes (ELMs). A credible reactor design must tolerate at least a few of these transient events without serious consequences such as melting of the structure. This paper investigates and compares the performance of the current ITER tokamak design during two types of transient events, i.e., ELMs occurring at normal operation and disruptions during abnormal operation. We simulated the divertor components response using our integrated 3D HEIGHTS package. The simulations include self-consistent modeling of the interaction of the released core plasma particles with the initial solid divertor material, energy deposition processes, vaporization of divertor material, secondary plasma formation and MHD evolution, incident core particles collisions and scattering from this dense secondary plasma, photon radiation of secondary plasma, and the resulting heat loads on nearby components. Our simulations showed that using a small carbon insert around the strike point can significantly reduce the overall expected damage on the tungsten dome structure, reflector plates, and prevent tungsten vaporization and its potential core plasma contamination.

47 OTHER INSTRUMENTATION↗

DOE OSTI2026

Extreme confinement of hydrogen gas within fullerenelike nanoporous carbon

Nanoporous carbons and carbon nanostructures can store hydrogen at cryogenic temperatures but lack the volumetric and gravimetric capacity to be industrially significant. Recent inelastic neutron scattering experiments suggest a highly dense phase of hydrogen at temperatures well above the melting point of solid hydrogen. However, it remains unclear how pore geometry and intermolecular interactions enable these dense phases to exist, with dispersion (van der Waals) or electrostatic/induction suggested to be the key effects in slit and curved pores but their relative contributions have yet to be quantified. In this paper, we perform benchmark electronic structure calculations allowing the interactions between planar and curved aromatic molecules with hydrogen to be accurately determined. Dispersion was found to dominate over electrostatic and inductive effects with some many-body charge transfer (Dobson type-A) effects needed to capture the most highly curved structures. Density functional methods that include type-A many-body effects were found to accurately describe the intermolecular interactions at a fraction of the cost of coupled-cluster simulations and these approaches were used to calculate the energies inside large carbon bowl and slit pores. The interaction energies inside the bowl pores were found to depend on the orientation of the hydrogen molecule. This rotational barrier, modeled as a quantum hindered rotor, could reproduce the peak splitting observed in inelastic neutron scattering experiments, with weak splitting arising from bowl-like fullerene pores and strong splitting from highly confining nanotubelike pores. Increasing the fraction of such curved pores in nanoporous carbons may therefore offer a pathway to enhance their hydrogen-storage capacity. Moreover, the preferential adsorption of ortho hydrogen on nanotubelike pores could enable the storage of high-density hydrogen without the need to remove heat produced during the ortho-para hydrogen conversion.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Low- and intermediate-temperature oxidation of dimethyl ether up to 100 atm in a supercritical pressure jet-stirred reactor

Understanding the low- and intermediate-temperature oxidation chemistry of oxygenated fuels like dimethyl ether (DME) at high pressure is paramount to the development of advanced engines with low carbon emissions. The supercritical pressure jet-stirred reactor (SP-JSR) recently developed at Princeton provides a new platform for conducting kinetic studies at low and intermediate temperatures at extremely high pressures with a uniform temperature distribution and a short flow residence time. This paper uses the SP-JSR to investigate DME oxidation at equivalence ratios of 0.175, 1.0, and 1.72, for pressures of 10 and 100 atm, and temperatures ranging from 400 to 900 K. The results demonstrate weakened NTC behavior at 100 atm relative to 10 atm due to increased flux through QOOH + O 2 = O 2 QOOH relative to QOOH = 2 CH 2 O + OH at 100 atm. Furthermore, the intermediate-temperature oxidation window is shifted to lower temperatures at 100 atm. The experimental data are compared with several chemical kinetic models from the literature. The existing models are seen to agree quite well with the experimental data at 10 atm. However, the models fail to properly capture the NTC behavior at 100 atm. Reaction pathway analyses indicate that both the low- and intermediate-temperature chemistries are controlled by RO 2 consumption pathways. The reaction rates for several of the important reactions, such as DME + OH = CH 3 OCH 2 + H 2 O, H 2 O 2 (+M) = 2 OH (+M), and 2 HO 2 = 2 OH + O 2 are updated in this work. Furthermore, the updated model improves the predictability for all key species compared to the original model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

BlueSTEAl: A pair of silicon arrays and a zero-degree phoswich detector for studies of scattering and reactions in inverse kinematics

BlueSTEAl, the Blue (aluminum chamber of) Silicon TElescope Arrays for light nuclei, has been developed to study direct reactions in inverse kinematics, as well as scattering and breakup reactions using radioactive ion beams. It is a detector system consisting of a pair of annular silicon detector arrays and a zero-degree phoswich plastic scintillator. For typical binary reaction studies in inverse kinematics, light ions are detected by the Si array in coincidence with heavy recoils detected by the phoswich placed at the focal-plane of a zero-degree magnetic spectrometer. The Si array can also be used to detect light nuclei such as beryllium and carbon with clear isotope separation, while the phoswich can also be placed at zero degrees without a spectrometer and used as a high-efficiency beam counting monitor with particle identification capability at the rate of up to ~5 × 10 4 particles per second. This paper reports on the capabilities of BlueSTEAl as determined by recent experiments performed at the Texas A&M Cyclotron Institute. Furthermore, the device is also anticipated to be used in future experiments at other radioactive ion beam facilities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

Effects of Methylating Imidazolium-Based Ionic Liquids on Viscosity: New Insights from the Compensated Arrhenius Formalism

Methylation of the C(2) carbon on imidazolium-based room temperature ionic liquids (RTILs) causes an unexpected increase in viscosity when paired with the anion bis(trifluoromethylsulfonamide) [Tf 2 N] – , but the viscosity decreases when the methylated imidazolium is paired with a tetracyanoborate [B(CN) 4 ] – anion. Herein, this paper investigates these different observations in viscosity using the compensated Arrheniusformalism (CAF) for fluidity (inverse viscosity), which assumes fluidity to be a thermally activated process. CAF activation energies are determined for imidazolium [Tf 2 N] – and methylated imidazolium [Tf 2 N] – and compared to imidazolium [B(CN) 4 ] – and methylated imidazolium [B(CN) 4 ] – . The results show that the activation energy increases with methylation for [Tf 2 N] – , but it decreases with methylation for [B(CN) 4 ] – . The CAF results also yield information concerning the entropy of activation, which are compared for the two systems

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗