Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “binding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Biochemical Roles for Conserved Residues in the Bacterial Fatty Acid-binding Protein Family

Fatty acid kinase (Fak) is a ubiquitous Gram-positive bacterial enzyme consisting of an ATP-binding protein (FakA) that phosphorylates the fatty acid bound to FakB. In Staphylococcus aureus, Fak is a global regulator of virulence factor transcription and is essential for the activation of exogenous fatty acids for incorporation into phospholipids. The 1.2-Å x-ray structure of S. aureus FakB2, activity assays, solution studies, site-directed mutagenesis, and in vivo complementation were used to define the functions of the five conserved residues that define the FakB protein family (Pfam02645). The fatty acid tail is buried within the protein, and the exposed carboxyl group is bound by a Ser-93-fatty acid carboxyl-Thr-61-His-266 hydrogen bond network. The guanidinium of the invariant Arg-170 is positioned to potentially interact with a bound acylphosphate. The reduced thermal denaturation temperatures of the T61A, S93A, and H266A FakB2 mutants illustrate the importance of the hydrogen bond network in protein stability. The FakB2 T61A, S93A, and H266A mutants are 1000-fold less active in the Fak assay, and the R170A mutant is completely inactive. All FakB2 mutants form FakA(FakB2)2 complexes except FakB2(R202A), which is deficient in FakA binding. Allelic replacement shows that strains expressing FakB2 mutants are defective in fatty acid incorporation into phospholipids and virulence gene transcription. These conserved residues are likely to perform the same critical functions in all bacterial fatty acid-binding proteins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A NEW DETERMINATION OF THE BINDING ENERGY OF ATOMIC OXYGEN ON DUST GRAIN SURFACES: EXPERIMENTAL RESULTS AND SIMULATIONS

The energy to desorb atomic oxygen from an interstellar dust grain surface, E{sub des}, is an important controlling parameter in gas-grain models; its value impacts the temperature range over which oxygen resides on a dust grain. However, no prior measurement has been done of the desorption energy. We report the first direct measurement of E{sub des} for atomic oxygen from dust grain analogs. The values of E{sub des} are 1660 ± 60 and 1850 ± 90 K for porous amorphous water ice and for a bare amorphous silicate film, respectively, or about twice the value previously adopted in simulations of the chemical evolution of a cloud. We use the new values to study oxygen chemistry as a function of depth in a molecular cloud. For n = 10{sup 4} cm{sup −3} and G{sub 0} = 10{sup 2} (G{sub 0} = 1 is the average local interstellar radiation field), the main result of the adoption of the higher oxygen binding energy is that H{sub 2}O can form on grains at lower visual extinction A{sub V}, closer to the cloud surface. A higher binding energy of O results in more formation of OH and H{sub 2}O on grains, which are subsequently desorbed by far-ultraviolet radiation, with consequences for gas-phase chemistry. For higher values of n and G{sub 0}, the higher binding energy can lead to a large increase in the column of H{sub 2}O but a decrease in the column of O{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A van der Waals density functional study of adenine on graphene: Single molecular adsorption and overlayer binding

The adsorption of an adenine molecule on graphene is studied using a first-principles van der Waals functional (vdW-DF) [Dion et al., Phys. Rev. Lett. 92, 246401 (2004)]. The cohesive energy of an ordered adenine overlayer is also estimated. For the adsorption of a single molecule, we determine the optimal binding configuration and adsorption energy by translating and rotating the molecule. The adsorption energy for a single molecule of adenine is found to be 711 meV, which is close to the calculated adsorption energy of the similar-sized naphthalene. Based on the single molecular binding configuration, we estimate the cohesive energy of a two-dimensional ordered overlayer. We find a significantly stronger binding energy for the ordered overlayer than for single-molecule adsorption.

59 BASIC BIOLOGICAL SCIENCES↗

Faithful tight-binding models and fragile topology of magic-angle bilayer graphene

Correlated insulators and superconductivity have been observed in “magic-angle” twisted bilayer graphene, when the nearly flat bands close to neutrality are partially filled. Here, while a momentum-space continuum model accurately describes these flat bands, interaction effects are more conveniently incorporated in tight-binding models. We have previously shown that no fully symmetric tight-binding model can be minimal, in the sense of capturing just the flat bands, so extended models are unavoidable. Here, we introduce a family of tight-binding models that capture the flat bands while simultaneously retaining all symmetries. In particular, we construct three concrete models with five, six, or ten bands per valley and per spin. These models are also faithful, in that the additional degrees of freedom represent energy bands further away from neutrality, and they serve as optimal starting points for a controlled study of interaction effects. Furthermore, our construction demonstrates the “fragile topology” of the nearly flat bands; i.e., the obstruction to constructing exponentially localized Wannier functions can be resolved when a particular set of trivial bands is added to the model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Addendum to triton and hypertriton binding energies calculated from SU{sub 6} quark-model baryon-baryon interactions

Previously we calculated the binding energies of the triton and hypertriton, using an SU{sub 6} quark-model interaction obtained by a resonating-group method of two baryon clusters. In contrast to the previous calculations employing the energy-dependent interaction kernel, we present new results using a renormalized interaction that is energy-independent and still preserves all the two-baryon data. The new binding energies are slightly smaller than the previous values. In particular the triton binding energy turns out to be 8.14 MeV with a charge-dependence correction of the two-nucleon force, 190 keV, being included. This indicates that the energy to be accounted for by three-body forces is about 350 keV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Bipolaron and N-Polaron Binding Energies

The binding of polarons, or its absence, is an old and subtle topic. Here we prove two things rigorously. First, the transition from many-body collapse to the existence of a thermodynamic limit for N polarons occurs precisely at U=2{alpha}, where U is the electronic Coulomb repulsion and {alpha} is the polaron coupling constant. Second, if U is large enough, there is no multipolaron binding of any kind. Considering the known fact that there is binding for some U>2{alpha}, these conclusions are not obvious and their proof has been an open problem for some time.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the atomic-number similarity of the binding energies of electrons in filled shells of elements of the periodic table

An expression for the binding energies of electrons in the ground state of an atom is derived on the basis of the Bohr–Sommerfeld quantization rule within the Thomas–Fermi model. The validity of this relation for all elements from neon to uranium is tested within a more perfect quantum-mechanical model with and without the inclusion of relativistic effects, as well as with experimental binding energies. As a result, the ordering of electronic levels in filled atomic shells is established, manifested in an approximate atomic-number similarity. It is proposed to use this scaling property to analytically estimate the binding energies of electrons in an arbitrary atom.

74 ATOMIC AND MOLECULAR PHYSICS↗

Exciton binding energy in semiconductor quantum dots

In the adiabatic approximation in the context of the modified effective mass approach, in which the reduced exciton effective mass {mu} = {mu}(a) is a function of the radius a of the semiconductor quantum dot, an expression for the exciton binding energy E{sub ex}(a) in the quantum dot is derived. It is found that, in the CdSe and CdS quantum dots with the radii a comparable to the Bohr exciton radii a{sub ex}, the exciton binding energy E{sub ex}(a) is substantially (respectively, 7.4 and 4.5 times) higher than the exciton binding energy in the CdSe and CdS single crystals.

36 MATERIALS SCIENCE↗

Optimizing the Binding Energy of Hydrogen on Nanostructured Carbon Materials through Structure Control and Chemical Doping

The DOE Hydrogen Sorption Center of Excellence (HSCoE) was formed in 2005 to develop materials for hydrogen storage systems to be used in light-duty vehicles. The HSCoE and two related centers of excellence were created as follow-on activities to the DOE Office of Energy Efficiency and Renewable Energy’s (EERE’s) Hydrogen Storage Grand Challenge Solicitation issued in FY 2003. The Hydrogen Sorption Center of Excellence (HSCoE) focuses on developing high-capacity sorbents with the goal to operate at temperatures and pressures approaching ambient and be efficiently and quickly charged in the tank with minimal energy requirements and penalties to the hydrogen fuel infrastructure. The work was directed at overcoming barriers to achieving DOE system goals and identifying pathways to meet the hydrogen storage system targets. To ensure that the development activities were performed as efficiently as possible, the HSCoE formed complementary, focused development clusters based on the following four sorption-based hydrogen storage mechanisms: 1. Physisorption on high specific surface area and nominally single element materials 2. Enhanced H2 binding in Substituted/heterogeneous materials 3. Strong and/or multiple H2 binding from coordinated but electronically unsatruated metal centers 4. Weak Chemisorption/Spillover. As a member of the team, our group at Duke studied the synthesis of various carbon-based materials, including carbon nanotubes and microporous carbon materials with controlled porosity. We worked closely with other team members to study the effect of pore size on the binding energy of hydrogen to the carbon –based materials. Our initial project focus was on the synthesis and purification of small diameter, single-walled carbon nanotubes (SWNTs) with well-controlled diameters for the study of their hydrogen storage properties as a function of diameters. We developed a chemical vapor deposition method that synthesized gram quantities of carbon nanotubes with average diameter size at less than 1 nm. However, initial tests performed at our collaborator’s lab at the National Renewable Energy Laboratory (NREL) did not indicate improved hydrogen sorption properties for the smaller-diameter nanotubes (compared with other types of nanotubes). As work continued, the difficulties in purification, large-scale synthesis, and stability of small diameter SWNTs became a major concern. In 2008, the Department of Energy (DOE) made a no-go decision on future applied R&D investment in pure, undoped, single-walled carbon nanotubes for vehicular hydrogen storage.2 The second phase of the project involved developing a low-cost and scalable approach for the synthesis of microporous carbon materials with well-controlled pore sizes that would be suitable for hydrogen storage. The team studied several approaches, including the use of different zeolites as a template, the use of organic micelle structures as a template, and the slow oxidation of polymer precursors. Among them, the slow activation of Polyether ether ketone (PEEK) under either CO2 environment or H2O vapor produced microporous carbon with an average pore size of less than 2 nm. Initial testing at 77K at both NREL and the California Institute of Technology (CalTech) showed that these materials can store ~5.1 wt% hydrogen (excess) at 40 bar and 77K. The main feature to note with this material is that while the excess gravimetric capacities (>5 wt% at 77K) and specific surface areas (>3100 m2/g) are similar to AX-21 and other “super activated” commercial carbon sorbents at the same temperatures and pressures, due to the smaller pore sizes, bulk densities greater than 0.7 g/ml can be achieved, enabling excess volumetric capacities greater than 35 g/L; more than double that of AX-21.

08 HYDROGEN↗

Effect of Off-Target Binding on 18 F-Flortaucipir Variability in Healthy Controls Across the Life Span

Measuring early tau accumulation is important in studying aging and Alzheimer disease and is only as accurate as the signal-to-noise ratio of the tracer. Along with aggregated tau in the form of neurofibrillary tangles, 18 F-flortaucipir has been reported to bind to neuromelanin, monoamine oxidase, calcifications, iron, leptomeningeal melanocytes, and microhemorrages. Although 18 F-flortaucipir successfully differentiates healthy controls (HCs) from subjects with Alzheimer disease, variability exists in the cortical signal in amyloid-negative HCs. We aimed to explore the relationship between off-target binding signal and variability in the cortical signal in HCs. Methods: Subjects ($n$ = 139) received 11 C-Pittsburgh compound B (PIB) and 18 F-flortaucipir PET scans and a magnetization-prepared rapid gradient echo MRI scan. PET frames were realigned and coregistered to the MR images, which were segmented using FreeSurfer. In amyloid-negative HCs ($n$ = 90; age range, 21-94 y), 7 nonspecific or off-target binding regions were considered: caudate, pallidum, putamen, thalamus, cerebellar white matter, hemispheric white matter, and choroid plexus. These regions of interest were assigned to 3 similarly behaving groups using principle components analysis, exploratory factor analysis, and Pearson correlations for caudate, putamen, and pallidum (also correlated with age); thalamus and white matter; and choroid plexus. In amyloid-negative HCs with 11 C-PIB and 18 F-flortaucipir scans, correlations were calculated between white and gray matter before and after partial-volume correction. Results: The correlation between white and gray matter disappeared after partial-volume correction in 11 C-PIB (r 2 = 0) but persisted for 18 F-flortaucipir (r 2 = 0.27), demonstrating that the correlation between white and gray matter signal in 18 F-flortaucipir is not solely due to partial-volume effects. A linear regression showed that off-target signal from putamen and thalamus together explained 64% of the variability in the cortical signal in amyloid-negative HCs (not seen in amyloid-positive HCs). Variability in amyloid-negative HCs but not amyloid-positive HCs correlated with white matter signal (unrelated to partial-volume effects) and age-related off-target signal (possibly related to iron load). Conclusion: The noise in the 18 F-flortaucipir measurement could pose challenges when studying early tau accumulation.

18F-flortaucipir PET↗

Crystal Structure of CYP3A4 Complexed with Fluorol Identifies the Substrate Access Channel as a High-Affinity Ligand Binding Site

Cytochrome P450 3A4 (CYP3A4) is a major human drug-metabolizing enzyme, notoriously known for its extreme substrate promiscuity, allosteric behavior, and implications in drug–drug interactions. Despite extensive investigations, the mechanism of ligand binding to CYP3A4 is not fully understood. We determined the crystal structure of CYP3A4 complexed with fluorol, a small fluorescent dye that can undergo hydroxylation. In the structure, fluorol associates to the substrate channel, well suited for the binding of planar polyaromatic molecules bearing polar groups, through which stabilizing H-bonds with the polar channel residues, such as Thr224 and Arg372, can be established. Mutagenesis, spectral, kinetic, and functional data confirmed the involvement but not strict requirement of Thr224 for the association of fluorol. Collectively, our data identify the substrate channel as a high-affinity ligand binding site and support the notion that hydrophobic ligands first dock to the nearby peripheral surface, before migrating to the channel and, subsequently, into the active site.

59 BASIC BIOLOGICAL SCIENCES↗

Structural and histone binding studies of the chromo barrel domain of TIP60

Tat-interactive protein 60 consists of an N-terminal chromo barrel domain (TIP60-CB) and a C-terminal acetyltransferase domain and acetylates histone and nonhistone proteins in diverse cellular processes. While TIP60-CB is thought to recognize histone tails, molecular details of this interaction remain unclear. In this work, we attempted a quantitative analysis of the interaction between the human TIP60-CB and histone peptides, but did not observe any detectable binding by either fluorescence polarization or isothermal titration calorimetry assays. We also determined the crystal structure of the TIP60-CB alone. Analysis of the apo-tructure reveals a putative peptide-binding site that might be occluded by the basic side chain of a residue in a unique β hairpin between the two N-terminal strands of the β barrel, leading to the inability of TIP60-CB to bind histones.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Homo‐Helical Rod Packing as a Path Toward the Highest Density of Guest‐Binding Metal Sites in Metal–Organic Frameworks

Abstract In porous materials, metal sites with coordinate solvents offer opportunities for many applications, especially those promoted by host–guest chemistry, but such sites are especially hard to create for Li‐based materials, because unlike transition metals, lithium does not usually possess a high‐enough coordination number for both framework construction and guest binding. This challenge is addressed by mimicking the functional group ratio and metal‐to‐ligand charge ratio in MOF‐74. A family of rod‐packing lithium–organic frameworks (CPM‐47, CPM‐48, and CPM‐49) were obtained. These materials exhibit an extremely high density of guest‐binding lithium sites. Also unusual is the homo‐helical rod‐packing in the CPM series, as compared to the hetero‐helical rod packing by helices of opposite handedness in MOF‐74. This work demonstrates new chemical and structural possibilities in developing a record‐setting high density of guest‐binding metal sites in inorganic–organic porous materials.

Zhao, Xiang↗

Calcium-Ion Binding Mediates the Reversible Interconversion of Cis and Trans Peroxido Dicopper Cores

Coupled dinuclear copper oxygen cores (Cu 2 O 2 ) featured in type III copper proteins (hemocyanin, tyrosinase, catechol oxidase) are vital for O 2 transport and substrate oxidation in many organisms. μ-1,2-cis peroxido dicopper cores ( C P) have been proposed as key structures in the early stages of O 2 binding in these proteins; their reversible isomerization to other Cu 2 O 2 cores are directly relevant to enzyme function. Furthermore, despite the relevance of such species to type III copper proteins and the broader interest in the properties and reactivity of bimetallic C P cores in biological and synthetic systems, the properties and reactivity of C P Cu 2 O 2 species remain largely unexplored. Herein, we report the reversible interconversion of μ-1,2-trans peroxido ( T P) and C P dicopper cores. Ca II mediates this process by reversible binding at the Cu 2 O 2 core, highlighting the unique capability for metal-ion binding events to stabilize novel reactive fragments and control O 2 activation in biomimetic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering a uranyl specific binding protein from NikR.

The first uranyl-selective DNA-binding protein is designed using the E. coli nickel(II)-responsive protein NikR as the template. The resulting NikR? protein binds uranyl (see picture) with a dissociation constant Kd=53?nM and selectively binds to DNA in the presence of uranyl.

59 BASIC BIOLOGICAL SCIENCES↗

Calcium‐Ion Binding Mediates the Reversible Interconversion of Cis and Trans Peroxido Dicopper Cores

Abstract Coupled dinuclear copper oxygen cores (Cu 2 O 2 ) featured in type III copper proteins (hemocyanin, tyrosinase, catechol oxidase) are vital for O 2 transport and substrate oxidation in many organisms. μ ‐1,2‐ cis peroxido dicopper cores ( C P ) have been proposed as key structures in the early stages of O 2 binding in these proteins; their reversible isomerization to other Cu 2 O 2 cores are directly relevant to enzyme function. Despite the relevance of such species to type III copper proteins and the broader interest in the properties and reactivity of bimetallic C P cores in biological and synthetic systems, the properties and reactivity of C P Cu 2 O 2 species remain largely unexplored. Herein, we report the reversible interconversion of μ ‐1,2‐ trans peroxido ( T P ) and C P dicopper cores. Ca II mediates this process by reversible binding at the Cu 2 O 2 core, highlighting the unique capability for metal‐ion binding events to stabilize novel reactive fragments and control O 2 activation in biomimetic systems.

Vargo, Natasha P.↗

Production, purification, and characterization of a fusion protein of carbonic anhydrase from Neisseria gonorrhoeae and cellulose binding domain from Clostridium thermocellum

Carbon dioxide capture technologies have the potential to become an important climate change mitigation option through sequestration of gaseous CO 2 , A new concept for CO 2 capture involves use of immobilized carbonic anhydrase (CA) that catalyzes the reversible hydration of CO 2 to HCO 3 - and H + . Cost-efficient production of the enzyme and an inexpensive immobilization system are critical for development of economically feasible CA-based CO 2 capture processes. An artificial, bifunctional enzyme containing CA from Neisseria gonorrhoeae and a cellulose binding domain (CBD) from Clostridium thermocellum was constructed with a His 6 tag. The chimeric enzyme exhibited both CA activity and CBD binding affinity. This fusion enzyme is of particular interest due to its binding affinity for cellulose and retained CA activity, which could serve as the basis for improved technology to capture CO 2 from flue gasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural basis of the American mink ACE2 binding by Y453F trimeric spike glycoproteins of SARS‐CoV‐2

Abstract Severe Acute Respiratory Syndrome Coronavirus 2 (SARS‐CoV‐2) enters the host cell by binding to angiotensin‐converting enzyme 2 (ACE2). While evolutionarily conserved, ACE2 receptors differ across various species and differential interactions with Spike (S) glycoproteins of SARS‐CoV‐2 viruses impact species specificity. Reverse zoonoses led to SARS‐CoV‐2 outbreaks on multiple American mink (Mustela vison) farms during the pandemic and gave rise to mink‐associated S substitutions known for transmissibility between mink and zoonotic transmission to humans. In this study, we used bio‐layer interferometry (BLI) to discern the differences in binding affinity between multiple human and mink‐derived S glycoproteins of SARS‐CoV‐2 and their respective ACE2 receptors. Further, we conducted a structural analysis of a mink variant S glycoprotein and American mink ACE2 (mvACE2) using cryo‐electron microscopy (cryo‐EM), revealing four distinct conformations. We discovered a novel intermediary conformation where the mvACE2 receptor is bound to the receptor‐binding domain (RBD) of the S glycoprotein in a “down” position, approximately 34° lower than previously reported “up” RBD. Finally, we compared residue interactions in the S‐ACE2 complex interface of S glycoprotein conformations with varying RBD orientations. These findings provide valuable insights into the molecular mechanisms of SARS‐CoV‐2 entry.

Virology↗