Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analytical model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Plume/flowfield jet interaction effects on the Space Shuttle Orbiter during entry

A comparison of wind tunnel test results with actual flight test data from the performance of the Orbiter Reaction Control System during the STS-1 and -2 flights is presented. Jet interaction phenomena were modeled analytically and a decision was made to develop a jet interaction scaling parameter from empirical measurements wherever possible. A number of different scaling parameters resulted, and errors bounds were determined for tunnel-to-tunnel differences, model to tunnel differences, balance accuracy, real gas effects, varying nozzle configurations, and angle of sideslip. Flight test data has concentrated on the lateral/directional jet interaction of the aft yaw jets, which operate almost continuously from entry down to Mach 1 conditions. A discussion of rolling moments, side forces, and results of usage of the aft pitch and roll jets indicates an underprediction of the side force and yawing moment and overprediction of pitch and roll jet effects.

Kanipe, D. B.↗
NASA NTRS1989

CryoTran user's manual, version 1.0

The development of cryogenic fluid management systems for space operation is a major portion of the efforts of the Cryogenic Fluids Technology Office (CFTO) at the NASA Lewis Research Center. Analytical models are a necessary part of experimental programs which are used to verify the results of experiments and are also used as a predictor for parametric studies. The CryoTran computer program is a bridge to obtain analytical results. The object of CryoTran is to coordinate these separate analyses into an integrated framework with a user-friendly interface and a common cryogenic property database. CryoTran is an integrated software system designed to help solve a diverse set of problems involving cryogenic fluid storage and transfer in both ground and low-g environments.

Cowgill, Glenn R.↗
NASA NTRS2003

Load Diffusion in Composite and Smart Structures

The research carried out here builds on our previous NASA supported research on the general topic of edge effects and load diffusion in composite structures. Further fundamental solid mechanics studies were carried out to provide a basis for assessing the complicated modeling necessary for the multi-functional large scale structures used by NASA. An understanding of the fundamental mechanisms of load diffusion in composite subcomponents is essential in developing primary composite structures. Some specific problems recently considered were those of end effects in smart materials and structures, study of the stress response of pressurized linear piezoelectric cylinders for both static and steady rotating configurations, an analysis of the effect of pre-stressing and pre-polarization on the decay of end effects in piezoelectric solids and investigation of constitutive models for hardening rubber-like materials. Our goal in the study of load diffusion is the development of readily applicable results for the decay lengths in terms of non-dimensional material and geometric parameters. Analytical models of load diffusion behavior are extremely valuable in building an intuitive base for developing refined modeling strategies and assessing results from finite element analyses.

Horgan, Cornelius O.↗
NASA NTRS1999

Ion Transport Modeling in Non-Collisional RF Sheaths

A reactor scale ICP plasma model does not adequately resolve the submillimeter scale rf sheaths due to severe disparities in length and times scales. These non-collisional sheaths determine the spread in the ion bombardment energy distribution on the wafer. Analytical models based on "damped potential" has been used by various authors to simplify sheath modeling. However, inherent in these models are some assumptions that may be invalid. In this work we show that simplifying assumptions such as a uniform ion flux may be in error by as much as 200% at 13.56MHz. This work involves solving ion transport in non-collisional rf sheaths. A comprehensive study of the dependence of ion flux and energy on uncertainties in the sheath-presheath (i.e. sheath thickness) boundary will also be done.

Meyyappan, M.↗
NASA NTRS2017

Stochastic Modelling of Wireless Energy Transfer

This study investigates the efficiency of a new method of powering remote sensors by the means of wireless energy transfer. The increased use of sensors for data collection comes with the inherent cost of supplying power from sources such as power cables or batteries. Wireless energy transfer technology eliminates the need for power cables or periodic battery replacement. The time and cost of setting up or expanding a sensor network will be reduced while allowing sensors to be placed in areas where running power cables or battery replacement is not feasible. This paper models wireless channels for power and data separately. Smart scheduling for the data channel is proposed to avoid transmitting data on a noisy channel where the probability of data loss is high to improve power efficiency. Analytical models have been developed and verified using simulations.

Veilleux, Shaun↗
NASA NTRS1987

A virtual manipulator model for space robotic systems

Future robotic manipulators carried by a spacecraft will be required to perform complex tasks in space, like repairing satellites. Such applications of robotic manipulators will encounter a number of kinematic, dynamic and control problems due to the dynamic coupling between the manipulators and the spacecraft. A new analytical modeling method for studying the kinematics and dynamics of manipulators in space is presented. The problem is treated by introducing the concept of a Virtual Manipulator (VM). The kinematic and dynamic motions of the manipulator, vehicle and payload, can be described relatively easily in terms of the Virtual Manipulator movements, which have a fixed base in inertial space at a point called a Virtual Ground. It is anticipated that the approach described here will aid in the design and development of future space manipulator systems.

Dubowsky, S.↗
NASA NTRS1989

A general model for memory interference in a multiprocessor system with memory hierarchy

The problem of memory interference in a multiprocessor system with a hierarchy of shared buses and memories is addressed. The behavior of the processors is represented by a sequence of memory requests with each followed by a determined amount of processing time. A statistical queuing network model for determining the extent of memory interference in multiprocessor systems with clusters of memory hierarchies is presented. The performance of the system is measured by the expected number of busy memory clusters. The results of the analytic model are compared with simulation results, and the correlation between them is found to be very high.

Taha, Badie A.↗
NASA NTRS1992

Higher order finite element analysis of thick composite laminates

A higher order, sub-parametric, laminated, 3D solid finite element was used for the analysis of very thick laminated composite plates. The geometry of this element is defined by four nodes in the X-Y plane which define a prism of material through the thickness of the laminate. There are twenty-four degrees of freedom at each node; translations at the upper and lower surfaces of the laminate in each of the three coordinate directions, and the derivatives of these translations with respect to each coordinate. This choice of degrees of freedom leads to displacement and strain compatibility at the corners. Stacking sequence effects are accounted for by explicitly integrating the strain energy density through the thickness of the element. The laminated solid element was combined with a gap-contact element to analyze thick laminated composite lugs loaded through flexible pins. The resulting model accounts for pin bending effects that produce non-uniform bearing stresses through the thickness of the lug. A thick composite lug experimental test program was performed, and provided data that was used to validate the analytical model. Two lug geometries and three stacking sequences were tested.

Goering, J.↗
NASA NTRS2006

Characterization and Analyses of Valves, Feed Lines and Tanks used in Propellant Delivery Systems at NASA SSC

Accurate modeling of liquid rocket engine test processes involves assessing critical fluid mechanic and heat and mass transfer mechanisms within a cryogenic environment, and accurately modeling fluid properties such as vapor pressure and liquid and gas densities as a function of pressure and temperature. The Engineering and Science Directorate at the NASA John C. Stennis Space Center has developed and implemented such analytic models and analysis processes that have been used over a broad range of thermodynamic systems and resulted in substantial improvements in rocket propulsion testing services. In this paper, we offer an overview of the analyses techniques used to simulate pressurization and propellant fluid systems associated with the test stands at the NASA John C. Stennis Space Center. More specifically, examples of the global performance (one-dimensional) of a propellant system are provided as predicted using the Rocket Propulsion Test Analysis (RPTA) model. Computational fluid dynamic (CFD) analyses utilizing multi-element, unstructured, moving grid capability of complex cryogenic feed ducts, transient valve operation, and pressurization and mixing in propellant tanks are provided as well.

Ryan, Harry M.↗
NASA NTRS2011

Solar Dynamics Observatory On-Orbit Jitter Testing, Analysis, and Mitigation Plans

The Solar Dynamics Observatory (SDO) was designed to understand the Sun and the Sun s influence on Earth. SDO was launched on February 11, 2010 carrying three scientific instruments: the Atmospheric Imaging Assembly (AIA), the Helioseismic and Magnetic Imager (HMI), and the Extreme Ultraviolet Variability Experiment (EVE). Both AIA and HMI are sensitive to high frequency pointing perturbations and have sub-arcsecond level line-of-sight (LOS) jitter requirements. Extensive modeling and analysis efforts were directed in estimating the amount of jitter disturbing the science instruments. To verify the disturbance models and to validate the jitter performance prior to launch, many jitter-critical components and subassemblies were tested either by the mechanism vendors or at the NASA Goddard Space Flight Center (GSFC). Although detailed analysis and assembly level tests were performed to obtain good jitter predictions, there were still several sources of uncertainties in the system. The structural finite element model did not have all the modes correlated to test data at high frequencies (greater than 50 Hz). The performance of the instrument stabilization system was not known exactly but was expected to be close to the analytical model. A true disturbance-to-LOS observatory level test was not available due to the tight schedule of the flight spacecraft, the cost in time and manpower, difficulties in creating gravity negation systems, and risks of damaging flight hardware. To protect the observatory jitter performance against model uncertainties, the SDO jitter team devised several on-orbit jitter reduction plans in addition to reserve margins on analysis results. Since some of these plans severely restricted the capabilities of several spacecraft components (e.g. wheels and High Gain Antennas), the SDO team performed on-orbit jitter tests to determine which jitter reduction plans, if any, were necessary to satisfy science LOS jitter requirements. The SDO on-orbit jitter tests were designed to satisfy the following four objectives: 1. Determine the acceptable reaction wheel operational speed range during Science Mode. 2. Determine HGA algorithm jitter parameters (number of stagger steps and enable/disable no-steprequests). 3. Determine acceptable EVE instrument filter wheels spin rates. 4. Determine if AIA instrument filter wheels excite the first AIA telescope structural mode. This paper provides detailed information on the SDO wheel jitter test plan, shows on-orbit jitter measurements and how ground predictions compare to those measurements, and describes the final jitter mitigation plan executed on SDO.

Liu, Kuo-Chia (Alice)↗
DOE OSTI2020

Formation of SMBH seeds in Population III star clusters through collisions: the importance of mass loss

ABSTRACT Runaway collisions in dense clusters may lead to the formation of supermassive black hole (SMBH) seeds, and this process can be further enhanced by accretion, as recent models of SMBH seed formation in Population III star clusters have shown. This may explain the presence of SMBHs already at high redshift, z > 6. However, in this context, mass loss during collisions was not considered and could play an important role for the formation of the SMBH seed. Here, we study the effect of mass loss, due to collisions of protostars, in the formation and evolution of a massive object in a dense primordial cluster. We consider both constant mass-loss fractions as well as analytic models based on the stellar structure of the collision components. Our calculations indicate that mass loss can significantly affect the final mass of the possible SMBH seed. Considering a constant mass loss of 5 per cent for every collision, we can lose between 60–80 per cent of the total mass that is obtained if mass loss were not considered. Using instead analytical prescriptions for mass loss, the mass of the final object is reduced by 15–40 per cent, depending on the accretion model for the cluster we study. Altogether, we obtain masses of the order of $10^4\, \mathrm{M}_{\odot }$, which are still massive enough to be SMBH seeds.

Alister Seguel, P. J.↗
NASA NTRS1986

Vibration and structureborne noise in space station

Analytical models and computer programs for structural response calculations under action of mechanical point loads were developed for single wall shells (composite or aluminum), double wall shells (composite or aluminum), and single wall or double wall circular plates (aluminum). The design configuration of the habitability modules of the space station concept are expected to be discretely stiffened cylindrical shells with truncated cone type end caps or flat but stiffened circular end plates. Analytical formulations and response calculations were performed for the case where the stiffened shell is represented by an orthotropic shell model. The natural frequencies can be calculated. For application to low frequency (below 1000Hz) vibrations and noise generation, such a model might be adequate to evaluate vibration and noise transmission characteristics of space station habitability modules. Parametric studies are now being performed to assess interior noise environment inside a habitability module to mechanically induced vibrations.

Vaicaitis, R.↗
NASA NTRS2017

Comparative Study of Three Reconnection X Line Models at the Earth's Dayside Magnetopause Using in Situ Observations

This work examines the large-scale aspects of magnetic field reconnection at the Earth's dayside magnetopause. We use two sets of reconnection events, which are identified mostly by the in situ detection of accelerated and Alfvenic plasma flows. We intercompare three analytical models that predict the reconnection X line location and orientation, namely, the Trattner et al. (2007) and Swisdak and Drake (2007) models and also a modified version of the component merging model. In the first set of reconnection observations, we show three fortuitous, quasi-simultaneous dayside magnetopause crossing events where two widely separated spacecraft detect reconnection signatures, and the X line location and orientation can be inferred from the observations. We compare X line model predictions to those inferred from observations. These three reconnection events indicate the presence of an extended (greater than 7 Earth radii in length), component-type reconnection X line on Earth's dayside magnetopause connecting and structuring the reconnection signatures at locations far apart. In the second set of reconnection events, we analyze the X line models' performance in predicting the observed reconnection outflow direction, i.e., its north-south and/or east-west senses, in a total of 75 single, rather than multiple and quasi-simultaneous, magnetopause crossing events, where reconnection-associated plasma flows were clearly present. We found that the Swisdak and Drake's (2007) X line model performs slightly better, albeit not statistically significant, when predicting both accelerated plasma flow north-south and east-west components in 73% and 53% of the cases, respectively, as compared to the Trattner et al. (2007) model (70% north-south and 42% east-west) and the modified component merging model (66% north-south and 50% east-west).

Souza, V. M.↗
DOE OSTI2025

Observation of kinetic mix enhancement in thin-shell OMEGA implosions

Recent separated reactant experiments for thin-shell (6 µ⁢m) shock-driven implosions on OMEGA have demonstrated significant mix from a buried deuterated layer of the shell into the hot spot. Time resolved D 3 He-p reaction history data demonstrate a (50 ± 20)⁢ ps shift earlier in peak nuclear emission for separated reactant experiments relative to control, in contrast to past experimental data for thicker, 20 µ⁢m shells with no laser burn through that show a 75 ps delay due to the time required for hydrodynamic instabilities to develop. This contrast suggests that the mix mechanism was not hydrodynamic. Ion kinetic simulations utilizing fall line analyses show much closer agreement with mix yield and temperature than diffusion models, predicting a D 3 He-p mix yield of 1.7 × 10 9 as compared to the experimental value of 9.3⁢ (±2.1) × 10 8 . This is three orders of magnitude closer than the fall line analysis from a hydrodynamic simulation with an inline diffusive mix model, which suggests minimal mix and D 3 He-p yields of 5×10 5 . This makes kinetic mechanisms the only feasible explanation for the mix seen, demonstrating impact of a non-standard mix mechanism. An analytical model of this kinetic mix mechanism suggests that it can remain significant in situations when the shell expands significantly to low densities, and diffusive models predict negligible mix. Finally, kinetic mix will impact multiple types of high energy density, laser-driven fusion experiments including high-adiabat direct drive cryoexperiments, nuclear cross section experiments, and thin-shell polar direct drive experiments used to tune heat conduction models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1974

A substructure energy method for prediction of Space Shuttle modal damping

The results of this program demonstrate the validity of a dissipative energy approach for predicting the damping of a four-component Space Shuttle model by means of modal parameters obtained from tests of the individual components. A relationship between modal damping energy per cycle and peak strain (or kinetic) energy is first determined empirically from test data for each component. Undamped analytical models of each component are also developed, and combined into a system model from which are obtained modal kinetic (or strain) energies for its respective modes. These data are then used with the empirical damping curves to apportion the proper amount of damping energy to each component in a combined system mode, and thereby allow a prediction of damping ratio.

Kana, D. D.↗
NASA NTRS1982

Correlating measured and predicted inplane stability characteristics for an advanced bearingless rotor

The experimental data were obtained from hover tests for a scaled model of an advanced bearingless main rotor. Both isolated rotor and ground resonance conditions were tested. Test parameters included blade built-in cone and sweep angles, rotor inplane structural damping, pitch link location and fuselage structural damping. Analytical results for the conditions tested were obtained using current Bell Helicopter analyses. In addition, variations in the analytical models were made to assess their impact on the correlation between computed and measured results. Results are presented in tabular and graphical form.

Weller, W. H.↗
NASA NTRS1983

Space shuttle launch vehicle aerodynamic uncertainties: Lessons learned

The chronological development and evolution of an uncertainties model which defines the complex interdependency and interaction of the individual Space Shuttle element and component uncertainties for the launch vehicle are presented. Emphasis is placed on user requirements which dictated certain concessions, simplifications, and assumptions in the analytical model. The use of the uncertainty model in the vehicle design process and flight planning support is discussed. The terminology and justification associated with tolerances as opposed to variations are also presented. Comparisons of and conclusions drawn from flight minus predicted data and uncertainties are given. Lessons learned from the Space Shuttle program concerning aerodynamic uncertainties are examined.

Hamilton, J. T.↗