Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “additive integrators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Development of Ultra Small Scale Mechanical Testing and Localized He Implantation for Nuclear Applications

Mechanical properties degradation of components deployed in nuclear applications has been a concern since the deployment of first generation nuclear power plants. Radiation damage along with environmental degradation, elevated temperatures, and long term deployment of nuclear structures pose a challenging environment for all materials in these applications. Traditionally, the mechanical properties are assessed by standardized macroscopic testing methods. While those are providing engineering relevant data these techniques do have limitations, especially on reactor irradiated materials, due to the large size of the samples. Limitations on the amount of radioactivity of large samples must be applied for research applications as they are conducted at universities. In addition it can be difficult to retrieve sufficiently large amounts of material from an operating reactor component. Therefore smaller sample sizes are desirable and reduce the amount of radioactive material which needs to be handled or material which needs to be retrieved. In addition, the number of tests which can be performed on materials irradiated in a test reactor program is limited due to limited space in specific dose and temperature positions. Downsizing of the mechanical test can overcome this issue and perform more tests on the same amount of irradiated materials, reducing the statistical uncertainties. In addition, smaller scale samples allow access to specific regions of interest in a material or component, be it the zone in front of a crack tip or the sampling of very small components like springs or welded areas. In addition ion beam irradiation has become an integral part of nuclear materials research to enhance the understanding of radiation damage in materials in a time and cost effective fashion. The drawback of ion beam irradiation is the small penetration depth of the ions into the material making localized microstructural characterization as well as small scale mechanical testing necessary. Another more fundamental motivation is the fact that since the beginning of electron microscopy, one has been concerned about imaging and quantifying defects in materials. Multiscale tools to image a large range of radiation induced defects have been established starting from atom probe tomography to transmission electron microscopy, up to scattering techniques. Mechanical testing, however, has always been performed on a large scale, and an attempt to match the same scale where a defect is observed with the materials' mechanical property response has not yet been realized. However, the question of separate effects testing on specific radiation induced defects remains and is an additional driving force for small scale mechanical testing. In this work we present an approach for small scale mechanical testing in irradiated materials and the variety of possible test methods developed today. We also present recent efforts of performing localized ion beam implantation to achieve a number of different doses in the same region of interest enhancing comparability and quantification of observed phenomena. It is the intention to give the reader an overview of the different microscale mechanical testing techniques possible today as well as an introduction of a novel ion beam irradiation method using a newly established capability. In this paper we can't discuss all aspects of all small scale mechanical testing of irradiated materials However, It does give an overview over the techniques enabled due to recent effort and enhanced instrument capability. While indentation or micro compression testing has been performed previously tensile testing and ion beam irradiation using the He ion beam microscope are novel approaches not attempted previously. (authors)

36 MATERIALS SCIENCE↗

Modeling of Powder Bed Manufacturing Defects

Powder bed additive manufacturing offers unmatched capabilities. The deposition resolution achieved is extremely high enabling the production of innovative functional products and materials. Achieving the desired final quality is, however, hampered by many potential defects that have to be managed in due course of the manufacturing process. Defects observed in products manufactured via powder bed fusion have been studied experimentally. In this effort we have relied on experiments reported in the literature and—when experimental data were not sufficient—we have performed additional experiments providing an extended foundation for defect analysis. There is large interest in reducing the effort and cost of additive manufacturing process qualification and certification using integrated computational material engineering. A prerequisite is, however, that numerical methods can indeed capture defects. A multiscale multiphysics platform is developed and applied to predict and explain the origin of several defects that have been observed experimentally during laser-based powder bed fusion processes. The models utilized are briefly introduced. The ability of the models to capture the observed defects is verified. The root cause of the defects is explained by analyzing the numerical results thus confirming the ability of numerical methods to provide a foundation for rapid process qualification.

36 MATERIALS SCIENCE↗

Utilizing Gaps and Key Performance Parameters to Inform NASA Environmental Control and Life Support and Human Health and Performance Capability Technology Decisions

Human spaceflight is a complex endeavor requiring a multitude of capabilities for transportation, crew health, scientific goals, and safe return to Earth. The difference between spaceflight proven capabilities and those needed for a particular mission is defined as a capability gap. Capability gaps are not technology specific. Each capability gap is approachable with a wide array of technologies that have unique benefits and challenges. Determining what a capability’s relevant and distinguishing key performance parameters (KPPs) are for a mission is critical. Mass, power, and volume are always constrained and important, but defining these in a way normalized by performance is challenging. Additionally, KPP definition for reliability, dormancy, and integration needs are very important and still evolving. This paper provides the approach of the Environmental Control and Life Support – Crew Health and Performance (ECLSS-CHP) System Capability Leadership Team (SCLT) to defining gaps and KPPs in support of the NASA’s Capabilities Integration Team data call objectives. The nine ECLSS-CHP capability areas are decomposed to capabilities, gaps, and KPPs. Rather than defining very detailed gaps, ECLSS-CHP defines high-level gaps to be technology agnostic. Within a gap, detailed KPPs are defined to both compare technologies and measure progress within a technology over time. Ideally, KPPs are clearly defined, widely communicated both internally and externally, and provide a common nomenclature to describe the state of the art and the degree of improvement required for exploration missions. KPPs help define when the gap is closed and the core mission objectives can be accomplished. Further technology improvements to enhance the capability, as measured by improved KPPs, must then be weighed against investments in open capability gaps that prevent NASA from achieving its exploration missions. It is uncommon that a technology maturation to improve all the relevant KPPs simultaneously but using KPPs is a critical technology investment decision making component. In addition to traditional technology selections, KPPs are informing how investments in ground testing prior to and in parallel with ISS technology demonstrations are required to improve reliability KPPs. The collection of all major technology activities within a capability area are captured on technology roadmaps to communicate how diverse program activities are coordinated to close gaps and infuse into exploration mission needs. A selection of ECLSS-CHP gaps and KPPs and their formulation, current state, and how they inform capability roadmap planning are discussed. The paper will contain a summary of the approximately 60 gaps. Gaps are classified as to their type (architecture, knowledge, technology, developmental, or engineering) depending on the magnitude of the gap. The paper will provide brief overviews of a few major technology challenges and the technologies being considered, but will reference detailed papers for a more thorough treatment of the challenges and state of the art. Data analysis of the gaps is in work and results are not currently available for this abstract. It is anticipated the paper will include examples of select KPPs with descriptions as to why these are the relevant measures. Additionally some KPPs will be graphically presented over time to show progress to date and when performance targets need to be achieved to support exploration missions. Graphical summaries of how gaps closures with near term mission elements support follow-on mission elements will be provided.

Life Support↗

Optimizing the Operational Parameters of an Electrochemical Purification Cell for Corrosion Mitigation in CSP Plants During Operation: Preprint

To make concentrating solar power (CSP) cost-competitive, the next generation of CSP plants will increase efficiency by operating at a higher temperature, which will require a new thermal energy storage material. One option for the thermal energy storage material is a ternary chloride salt that is stable at the temperatures required, but reacts easily with the atmosphere to form MgOHCl, a corrosive impurity. If left unchecked, this impurity will corrode the containment alloys, potentially leading to dangerous spills. We are working to design an electrochemical purification cell to remove MgOHCl from the molten chloride salt during CSP plant operation. In this paper, we use predictive modeling to assess the rate at which purification must occur. Additionally, we analyze possible process flow pathways for the molten chloride salts. Ultimately, we determine that implementation of a single reactor through which all chloride salts flow is the most efficient design to reduce impurity concentration below 0.1 mol % impurity.

concentrating solar power↗

Utilizing Gaps and Key Performance Parameters to Inform NASA Environmental Control and Life Support and Human Health and Performance Capability Technology Decisions

Human spaceflight is a complex endeavor requiring multiple capabilities for transportation, crew health, scientific goals, and safe return to Earth. The difference between spaceflight proven capabilities and those needed for future exploration architectures is defined as a capability gap. Capability gaps are not technology specific. Each capability gap is approachable with a wide array of technologies that have unique benefits and challenges. Determining what a capability’s relevant and distinguishing key performance parameters (KPPs) are for a mission is critical. Mass, power, and volume are always constrained and important, but defining these in a way normalized by performance is challenging. Additionally, KPP definition for reliability, dormancy, and integration needs are very important and still evolving. This paper provides the approach of the Environmental Control and Life Support – Crew Health and Performance (ECLSS-CHP) System Capability Leadership Team (SCLT) has used to define gaps and KPPs in support of the NASA’s Capabilities Integration Team data call objectives. The nine ECLSS-CHP capability areas are decomposed to capabilities with ~76 gaps and supported with KPPs. Rather than defining very detailed gaps, ECLSS-CHP defines high-level gaps to be technology agnostic. Within a gap, detailed KPPs are defined to both compare technologies and measure progress within a technology over time. Ideally, KPPs are clearly defined, widely communicated both internally and externally, and provide a common nomenclature to describe the state of the art and the degree of improvement required for exploration missions. KPPs help define when the gap is closed, and the core mission objectives can be accomplished. Further technology improvements to enhance the capability, as measured by improved KPPs, must then be weighed against investments in open capability gaps that prevent NASA from achieving its exploration missions. It is uncommon that a technology maturation to improve all the relevant KPPs simultaneously but using KPPs is a critical technology investment decision making component. In addition to traditional technology selections, KPPs are informing how investments in ground testing prior to and in parallel with ISS technology demonstrations are required to improve reliability KPPs. The collection of all major technology activities within a capability area are captured on technology roadmaps to communicate how diverse program activities are coordinated to close gaps and infuse into exploration mission needs. A selection of ECLSS-CHP gaps and KPPs and their formulation, current state, and how they inform capability roadmap planning are discussed.

Life Support↗

Two key features influencing community assembly processes at regional scale: Initial state and degree of change in environmental conditions

Belowground microbial communities strongly influence ecosystem function such that predicting function may rely on understanding ecological processes that assemble communities. Uncertainty remains, however, in what governs the relative contributions of different ecological processes. To help fill this knowledge gap we test the general hypothesis that both initial state and degree of change in environmental conditions govern the relative contributions of different ecological assembly processes. To do so we leveraged regional-scale nutrient and organic matter addition experiments and used soil organic matter (SOM) as a proxy of integrated soil environmental conditions. Consistent with our hypothesis, we found that both the initial amount of SOM and the degree of change in SOM—in response to nutrient addition—influenced the relative contributions of different ecological assembly processes. These influences were most clearly observed at the regional scale, suggesting potential scale dependence. More specifically, nutrient additions homogenized bacterial community composition due to enhanced influences of homogenizing dispersal when SOM content was initially high. In contrast, nutrient additions led to divergence in community composition due to variable selection when initial SOM was low and/or when SOM increased significantly in response to nutrient additions. Our findings indicate important connections among initial conditions, degree of change in environmental variables, and microbial community assembly processes that may influence ecosystem processes. These conceptual inferences highlight a need to strengthen connections between ecological theory and biogeochemical modeling.

Feng, Youzhi↗

Thylakoid-integrated recombinant Hcf106 participates in the chloroplast twin arginine transport system

The chloroplast twin arginine transport (cpTat) system distinguishes itself as a protein transport pathway by translocating fully folded proteins, using the proton-motive force (PMF) as the sole source of energy. The cpTat pathway is evolutionarily conserved with the Tat pathway found in the plasma membrane of many prokaryotes. The cpTat (Escherichia coli) system uses three proteins, Tha4 (TatA),Hcf106 (TatB), and cpTatC (TatC), to form a transient translocase allowing the pas-sage of precursor proteins. Briefly, cpTatC and Hcf106, with Tha4, form the initial receptor complex responsible for precursor protein recognition and binding in an energy-independent manner, while a separate pool of Tha4 assembles with the pre-cursor-bound receptor complex in the presence the PMF. Analysis by blue-native polyacrylamide gel electrophoresis (BN-PAGE) shows that the receptor complex, in the absence of precursor, migrates near 700 kDa and contains cpTatC and Hcf106with little Tha4 remaining after detergent solubilization. To investigate the role thatHcf106 may play in receptor complex oligomerization and/or stability, systematic cysteine substitutions were made in positions from the N-terminal transmembrane domain to the end of the predicted amphipathic helix of the protein. BN-PAGE analysis allowed us to identify the locations of amino acids in Hcf106 that were critical for interacting with cpTatC. Oxidative cross-linking allowed us to map interactions of the transmembrane domain and amphipathic helix region of Hcf106. In addition, we showed that in vitro expressed, integrated Hcf106 can interact with the precursor signal peptide domain and imported cpTatC, strongly suggesting that a subpopulation of the integrated Hcf106 is participating in competent cpTat complexes.

59 BASIC BIOLOGICAL SCIENCES↗

Embedded Sensor Development in Metallic Structures for the Transformational Challenge Reactor

The ability to make minimally intrusive measurements of process conditions has tremendous potential for improving system performance and control in applications such as nuclear power generation. Towards this end, emerging and evolving advanced manufacturing methods, such as additive manufacturing, present new opportunities for more seamlessly integrating sensing with structure. This technical report summarizes the progress of work performed to assess the feasibility of embedding commercial off-the-shelf (COTS) sensors in a metallic reactor core using advanced manufacturing methods. The progress of four research and development tasks are documented: 1) A survey of COTS sensors for nuclear applications that are candidates for embedded fabrication, 2) Development of a conceptual framework for investigating the feasibility of sensor embedment, 3) Definition of structural geometries and other characteristics that will represent compelling proof-of-concept, and 4) Preliminary prototyping of embedded sensors. For the purposes of this initial study, nuclear grade K-type thermocouples were selected for investigation of embedment methodologies. This sensor was selected as an initial candidate because it represents one of the simplest sensor configurations that can provide useful process information. A selective laser melting (SLM) additive manufacturing process was used to fabricate structures with complexity representative of the core design of the transformational challenge reactor (TCR) and methods were developed to embed a thermocouple with a complex two-dimensional routing path. There are many challenges associated with embedding sensors during the additive manufacturing process including securing the sensor in the structure, relocating the part in the additive machine if using a “pick and place” sensor placement method, mitigating the potential for powder contamination, optimizing energy deposition parameters to build as closely as possible around the sensor path and improve structural integrity of the part, and tuning energy deposition to mitigate thermally induced warpage of the sensor and part as well as potential for damaging the sensing device. Preliminary results indicate that it is feasible to integrate the sensor while minimally compromising the structural integrity of the part and preserving sensor performance. This first phase of this work focused on developing a workflow for embedding sensors and controlling energy deposition during the additive manufacturing process to better understand the build characteristics around the sensor. Future work will perform more in-depth characterization of prototype parts using X-ray computed tomography and scanning electron microscopy to better understand fabricated structures, performance testing of embedded sensors in high temperature environments, adding new embedded measurement modalities, embedding devices with dissimilar materials in contact with additive powders, and the development of methods for embedding sensors with three-dimensional routing paths.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Replacement of Melter 2 at the Defense Waste Processing Facility (DWPF) - 18608

The original DWPF melter was replaced in 2002 with an identical unit, and radioactive operation of Melter 2 commenced in 2003. After nearly 14 years of service, a lower electrode failure of Melter 2 occurred in February 2017 which required its removal and replacement with Melter 3. The scope of the replacement outage involves several significant evolutions: - Shutdown of Melter 2 and placement into a safe state; - Remote external and internal inspection of Melter 2 to chronicle its condition prior to removal; - Disassembly and removal of Melter 2 from the process cell; - Placement of Melter 2 into a storage box and transport to a storage vault; - Preparation and initial testing of Melter 3 prior to transport to the DWPF; - Transport to the DWPF and installation of Melter 3 in the process cell; - Final startup testing and initiation of radioactive operation. Upon determination that repair of Melter 2 was not feasible, DWPF created an outage team to integrate schedules and resources needed to execute melter replacement as well as including maintenance scope for facility work that can only be performed when the melter is de-energized. The execution of this scope required integration with other mission critical outage activities already in progress, and planned to start, including initial facility tie-in scope for the new Salt Waste Processing Facility (SWPF). This unplanned addition of the melter replacement scope to the existing outage scope resulted in the longest facility outage period since the initiation of radioactive operations at the DWPF in 1996. Successful completion of this scope across all Liquid Waste facilities would require balance - for schedules, resources, priority, funding, etc. To overcome the significant challenges created by this additional scope, a WAR Room was established to ensure adequate integration and coordination of critical resources, and daily progress. The execution of this scope has required the integration of nearly two dozen work groups across multiple facilities at Savannah River Site (SRS), in addition to support from nearly a dozen vendors. The melter replacement outage was executed with a high degree of disciplined operation to ensure the facility was ready to resume glass pouring operation in time to support restart of the Liquid Waste program at the Savannah River Site (SRS). This paper will provide a brief overview of Melter 2 operational history. The execution of the removal and replacement operations will be described with a specific focus on lessons learned and opportunities where the outage execution diverged from the original Melter 1 replacement outage. It is expected to be of interest to vitrification facilities, as well as facilities, which require remote maintenance and replacement of large process equipment. (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Heterogeneous Integration of Freestanding Bilayer Oxide Membrane for Multiferroicity

Transition metal oxides exhibit a plethora of electrical and magnetic properties described by their order parameters. In particular, ferroic orderings offer access to a rich spectrum of fundamental physics phenomena, in addition to a range of technological applications. The heterogeneous integration of ferroelectric and ferromagnetic materials is a fruitful way to design multiferroic oxides. The realization of freestanding heterogeneous membranes of multiferroic oxides is highly desirable. In this study, epitaxial BaTiO 3 /La 0.7 Sr 0.3 MnO 3 freestanding bilayer membranes are fabricated using pulsed laser epitaxy. The membrane displays ferroelectricity and ferromagnetism above room temperature accompanying the finite magnetoelectric coupling constant. Further, this study reveals that a freestanding heterostructure can be used to manipulate the structural and emergent properties of the membrane. In the absence of the strain caused by the substrate, the change in orbital occupancy of the magnetic layer leads to the reorientation of the magnetic easy-axis, that is, perpendicular magnetic anisotropy. These results of designing multiferroic oxide membranes open new avenues to integrate such flexible membranes for electronic applications.

36 MATERIALS SCIENCE↗

SU-E-I-97: Smart Auto-Planning Framework in An EMR Environment (SAFEE)

Purpose: Our Radiation Oncology Department uses clinical practice guidelines for patient treatment, including normal tissue sparing and other dosimetric constraints. These practice guidelines were adapted from national guidelines, clinical trials, literature reviews, and practitioner's own experience. Modern treatment planning systems (TPS) have the capability of incorporating these practice guidelines to automatically create radiation therapy treatment plans with little human intervention. We are developing a software infrastructure to integrate clinical practice guidelines and radiation oncology electronic medical record (EMR) system into radiation therapy treatment planning system (TPS) for auto planning. Methods: Our Smart Auto-Planning Framework in an EMR environment (SAFEE) uses a software pipeline framework to integrate practice guidelines,EMR, and TPS together. The SAFEE system starts with retrieving diagnosis information and physician's prescription from the EMR system. After approval of contouring, SAFEE will automatically create plans according to our guidelines. Based on clinical objectives, SAFEE will automatically select treatment delivery techniques (such as, 3DRT/IMRT/VMAT) and optimize plans. When necessary, SAFEE will create multiple treatment plans with different combinations of parameters. SAFEE's pipeline structure makes it very flexible to integrate various techniques, such as, Model-Base Segmentation (MBS) and plan optimization algorithms, e.g., Multi-Criteria Optimization (MCO). In addition, SAFEE uses machine learning, data mining techniques, and an integrated database to create clinical knowledgebase and then answer clinical questions, such as, how to score plan quality or how volume overlap affects physicians' decision in beam and treatment technique selection. Results: In our institution, we use Varian Aria EMR system and RayStation TPS from RaySearch, whose ScriptService API allows control by external programs. These applications are the building blocks of our SAFEE system. Conclusion: SAFEE is a feasible method of integrating clinical information to develop an auto-planning paradigm to improve clinical workflow in cancer patient care.

60 APPLIED LIFE SCIENCES↗

Use of Continuous Integration Tools for Application Performance Monitoring

High performance computing systems are becom- ing increasingly complex, both in node architecture and in the multiple layers of software stack required to compile and run applications. As a consequence, the likelihood is increasing for application performance regressions to occur as a result of routine upgrades of system software components which interact in complex ways. The purpose of this study is to evaluate the effectiveness of continuous integration tools for application performance monitoring on HPC systems. In addition, this paper also describes a prototype system for application perfor- mance monitoring based on Jenkins, a Java-based continuous integration tool. The monitoring system described leverages several features in Jenkins to track application performance results over time. Preliminary results and lessons learned from monitoring applications on Cray systems at the Oak Ridge Leadership Computing Facility are presented.

Vergara Larrea, Veronica G↗

The CompTox Chemistry Dashboard: a community data resource for environmental chemistry

Despite an abundance of online databases providing access to chemical data, there is increasing demand for highquality, structure-curated, open data to meet the various needs of the environmental sciences and computational toxicology communities. The U.S. Environmental Protection Agency’s (EPA) web-based CompTox Chemistry Dashboard is addressing these needs by integrating diverse types of relevant domain data through a cheminformatics layer, built upon a database of curated substances linked to chemical structures. These data include physicochemical, environmental fate and transport, exposure, usage, in vivo toxicity, and in vitro bioassay data, surfaced through an integration hub with link-outs to additional EPA data and public domain online resources. Batch searching allows for direct chemical identifer (ID) mapping and downloading of multiple data streams in several diferent formats. This facilitates fast access to available structure, property, toxicity, and bioassay data for collections of chemicals (hundreds to thousands at a time). Advanced search capabilities are available to support, for example, non-targeted analysis and identifcation of chemicals using mass spectrometry. The contents of the chemistry database, presently containing ~ 760,000 substances, are available as public domain data for download. The chemistry content underpinning the Dashboard has been aggregated over the past 15 years by both manual and auto-curation techniques within EPA’s DSSTox project. DSSTox chemical content is subject to strict quality controls to enforce consistency among chemical substance-structure identifers, as well as list curation review to ensure accurate linkages of DSSTox substances to chemical lists and associated data. The Dashboard, publicly launched in April 2016, has expanded considerably in content and user trafc over the past year. It is continuously evolving with the growth of DSSTox into high-interest or data-rich domains of interest to EPA, such as chemicals on the Toxic Substances Control Act listing, while providing the user community with a fexible and dynamic web-based platform for integration, processing, visualization and delivery of data and resources. The Dashboard provides support for a broad array of research and regulatory programs across the worldwide community of toxicologists and environmental scientists.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward the Advanced Manufacturing of Land-Based Wind Turbine Blades: Preprint

The National Renewable Energy Laboratory (NREL) and General Electric (GE) are partners within the Additive and Modular Enabled Rotor Blades and Integrated Composites Assembly (AMERICA) project. AMERICA aims to develop advanced manufacturing solutions to reduce labor and cycle time while increasing recyclability of wind turbine blades. The project is funded by the Advanced Manufacturing Office (AMO) of the U.S. Department of Energy (DOE). This paper describes the techno-economic analysis of the novel manufacturing process applied to the tip of the blade of a representative land-based wind turbine. A comparison to a standard manufacturing process is established, highlighting challenges and opportunities. Several uncertainties affect the analysis, but with the current set of assumptions, the tip adopting advanced manufacturing is predicted to lower labor by 21%, cycle time by 39%, and total blade tip costs by 15% while simultaneously increasing production quality and adopting recyclable thermoplastic resin.

3D printing↗

Polarized Substructural Session Types

Concurrent processes can be extremely difficult to reason about, both for programmers and formally. One approach to coping with this difficulty is to study new programming languages and type features such as Session Types. Session types take as their conceptual notion of concurrency as a collection of processes linked together via channels and provide type-level coordination between processes using these channels. Logically motivated programming languages exploit the idea that providing a proof of a theorem in a logic is similar to proving that a given term has a particular type in a programming language and vice versa. These connections can be interesting for a few different reasons. First, when language and logic are independently discovered and independently useful, the existence of a connection suggests that both are onto some fundamentally important idea. Additionally, a connection provides a basis both for sanity checking our ideas and also can be fruitful grounds for inspiration by seeing how variants of either the logic or the language are reflected through the connection. This thesis primarily describes an exploration of logically motivated session types, SILL. Polarization, classifying propositions as either positive or negative, provides a natural way to describe a logically based session typing language with asynchronous communication while retaining a semantics that is reasonably implementable. Additionally, polarization gives us a way to smoothly integrate synchronous channels into SILL without needing a semantic extension. When combined with Adjoint Logic, this gives us an ability to incorporate a variety of modalities with relatively little work. From a practical perspective, this gives SILL access to persistent processes and garbage collection. We additionally explore a trio of loosely related extensions to SILL, and their logical connections, inspired by the above results: bundled message passing to reduce the number of communications performed by processes; racy programs, enabled by a select/epoll-like mechanism; and asynchronous receiving, an almost generalization of the basic asynchronous semantics. We have three different implementations of SILL: a simple but relatively full featured interpreter written in OCaml; a fragment of SILL as an embedded domain specific language in Haskell; and a cleaner version of the same in Idris. Lastly, we show that Liquid Types and Session Types are compatible. This gives us one notion of a dependently session typed language.

97 MATHEMATICS AND COMPUTING↗

An attempt towards simultaneous biobased solvent based extraction of proteins and enzymatic saccharification of cellulosic materials from distiller's grains and solubles.

Distiller's grains and solubles (DGS) is the major co-product of corn dry mill ethanol production, and is composed of 30% protein and 30-40% polysaccharides. We report a strategy for simultaneous extraction of protein with food-grade biobased solvents (ethyl lactate, d-limonene, and distilled methyl esters) and enzymatic saccharification of glucan in DGS. This approach would produce a high-value animal feed while simultaneously producing additional sugars for ethanol production. Preliminary experiments on protein extraction resulted in recovery of 15-45% of the protein, with hydrophobic biobased solvents obtaining the best results. The integrated hydrolysis and extraction experiments showed that biobased solvent addition did not inhibit hydrolysis of the cellulose. However, only 25-33% of the total protein was extracted from DGS, and the extracted protein largely resided in the aqueous phase, not the solvent phase. We hypothesize that the hydrophobic solvent could not access the proteins surrounded by the aqueous phase inside the fibrous structure of DGS due to poor mass transfer. Further process improvements are needed to overcome this obstacle.

59 BASIC BIOLOGICAL SCIENCES↗

Investigating Fission Reaction Rate Ratio Sensitivities [Slides]

One EUCLID project goal is to create a NEW capability in the MCNP6 code. This is being tested on reaction rate sensitivities and compared with SENSMG results. Reaction rate ratio sensitivities were added to EUCLID sensitivity library and investigated to determine value toward designing optimized experiments aimed at reducing compensating errors in nuclear data. The use of adjustment using multiple responses (and underlying/required capabilities) may benefit many applications. These include a tool for adjustment using multiple integral responses (ND adjustment and validation community); sensitivities of additional responses (ND adjustment and validation community); sensitivity capabilities (users in many application areas including safeguards/nonproliferation, criticality safety, etc.); and experiment optimization capability (applications which can benefit from integral experiments). Team is working to build and test future tools and to understand compensating errors

235U↗

Convection equation modeling: A non-iterative direct matrix solution algorithm for use with SINDA

The determination of the boundary conditions for a component-level analysis, applying discrete finite element and finite difference modeling techniques often requires an analysis of complex coupled phenomenon that cannot be described algebraically. For example, an analysis of the temperature field of a coldplate surface with an integral fluid loop requires a solution to the parabolic heat equation and also requires the boundary conditions that describe the local fluid temperature. However, the local fluid temperature is described by a convection equation that can only be solved with the knowledge of the locally-coupled coldplate temperatures. Generally speaking, it is not computationally efficient, and sometimes, not even possible to perform a direct, coupled phenomenon analysis of the component-level and boundary condition models within a single analysis code. An alternative is to perform a disjoint analysis, but transmit the necessary information between models during the simulation to provide an indirect coupling. For this approach to be effective, the component-level model retains full detail while the boundary condition model is simplified to provide a fast, first-order prediction of the phenomenon in question. Specifically for the present study, the coldplate structure is analyzed with a discrete, numerical model (SINDA) while the fluid loop convection equation is analyzed with a discrete, analytical model (direct matrix solution). This indirect coupling allows a satisfactory prediction of the boundary condition, while not subjugating the overall computational efficiency of the component-level analysis. In the present study a discussion of the complete analysis of the derivation and direct matrix solution algorithm of the convection equation is presented. Discretization is analyzed and discussed to extend of solution accuracy, stability and computation speed. Case studies considering a pulsed and harmonic inlet disturbance to the fluid loop are analyzed to assist in the discussion of numerical dissipation and accuracy. In addition, the issues of code melding or integration with standard class solvers such as SINDA are discussed to advise the user of the potential problems to be encountered.

Schrage, Dean S.↗