Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Variable Geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Design and Operability of a Variably Premixed Rotating Detonation Engine for the Evaluation of Mixing Effects

The design of a variably premixed rotating detonation engine (RDE) is presented with preliminary experimental results. Premixed operation decouples the mixing process from the detonation cycle, enabling direct comparison with premixed simulations. A porous medium, formed into a ring of 6.45 mm radial thickness, serves as the premixture injector, arresting potential flash-back events. Two chamber geometries are tested, the first aimed at eliminating recirculation zones and comprised of a 7.62 mm wide channel, the width of which the porous injector occupies 85%. The second chamber geometry features a 10.7 mm channel width and a 3.08 mm wide backward-facing step on the internal diameter of the premixture injector. Transverse optical access is incorporated into the design using a transparent outer body. Tests were conducted at mixing conditions ranging from non-premixed to fully premixed with gaseous hydrogen and air reactants in the narrow-channel configuration. Engine operating modes and detonation wave speeds were characterized using aft-end high-speed chemiluminescence imaging, while detonation wave topology and heat release in the refill zone are captured by transverse imaging. A two-wave counterpropagating mode was most commonly observed in the narrow-channel configuration with wave speeds ranging from 49-67% of the theoretical Chapman-Jouguet (CJ) velocity. Fully premixed operation in the backward-facing step configuration rendered wave speeds up to 86% of CJ velocity, consistent with previous non-premixed results using the same channel width and a backward-facing step. These results demonstrate successful premixed RDE operation with high wave speeds and highlight the role of product recirculation zones in stabilizing the detonation cycle.

detonation↗
DOE OSTI2020

NEON AOP Imaging Spectroscopy Survey of Upper East River Colorado Watersheds: Raw-Space Radiance and Observational Variable Dataset

Lawrence Berkeley National Laboratory (LBNL) contracted the National Ecological Observatory Network Airborne Observation Platform (NEON AOP) to observe watersheds of interest near Crested Butte, CO with remotely sensed data including imaging spectroscopy. The flight box design encompassed the watersheds, and flight design targeted a minimum of 30% overlap between adjacent flight lines. The total area surveyed was 334 km2 across 72 lines. Flight lines were oriented north-south for consistency in solar illumination geometry. Seven days were required to cover the flight area. Some areas were flown additional times to improve data quality or temporal coincidence between airborne acquisitions and field sampling. In total, 102 lines were collected and can be downloaded here: https://portal.nersc.gov/wfsfa/doi-10-15485-1617204/. The instrument used for the acquisition was an Airborne Visible-Infrared Imaging Spectrometer - Next Generation (AVIRIS-NG), which records radiance within 426 contiguous spectral bands in the wavelength range from 380 to 2510 nm. The instrument was flown at a target aboveground altitude of 1000 m for a processed data spatial resolution of 1 m. These data are non-orthorectified, radiance data that require further processing prior to use as a surface reflectance data set.

2018 NEON and 2025 CHESS Campaigns↗
NASA NTRS1993

Grid and design variables sensitivity analyses for NACA four-digit wing-sections

Two distinct parameterization procedures are developed for investigating the grid sensitivity with respect to design parameters of a wing-section example. The first procedure is based on traditional (physical) relations defining NACA four-digit wing-sections. The second is advocating a novel (geometrical) parameterization using spline functions such as NURBS (Non-Uniform Rational B-Splines) for defining the wing-section geometry. An interactive algebraic grid generation technique, known as Hermite Cubic Interpolation, is employed to generate C-type grids around wing-sections. The grid sensitivity of the domain with respect to design and grid parameters has been obtained by direct differentiation of the grid equations. A hybrid approach is proposed for more geometrically complex configurations. A comparison of the sensitivity coefficients with those obtained using a finite-difference approach has been made to verify the feasibility of the approach. The aerodynamic sensitivity coefficients are obtained using the compressible two-dimensional thin-layer Navier-Stokes equations.

Sadrehaghighi, Ideen↗
DOE OSTI2020

High precision strike point control to support experiments in the DIII-D small angle slot divertor

Improvements in strike point control enabled tests with the new Small Angle Slot (SAS) divertor installed at DIII-D with precision as tight as ±1 mm, barring brief perturbations from ELMs. Aside from being narrower than previous baffle structures in DIII-D, simulations indicate that performance of the SAS divertor should be very sensitive to strike point position, making the improved strike point control essential for experiments with the SAS divertor. Improved control entails regulating more divertor geometry target locations than before and setting higher gain on the strike point target. This is achieved by tasking more poloidal field (PF) shaping coils with divertor topology control, fine tuning of the coil configuration and algorithm gains, and adding regulation of the power supply common rail. Here, the result is that although more variables are controlled, precision is better: high frequency jitter in the strike point position is lower on average compared to related discharges with standard divertor shape control.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Calculations Document

Figure 1 shows a simplified model schematic of the Tetracage target design. In this figure the green lines represent the Tetracage yarns, which consist of two parallel yarns on the top and two parallel yarns on the bottom with the pairs in a cross hatched pattern. For simplicity, as we are only considering vertical forces, we will perform calculations without consideration for the two pairs of yarns being perpendicular to each other. Also worth noting is the model shows the yarns extending directly to the capsule then closely hugging it – in reality, the yarns behave as you would expect where they hug the capsule only as much as the geometry of their deflection allows, similarly to if you held a tennis ball with a pair of parallel strings anchored at opposing ends. The dashed black lines show the path the yarns take straight across from slot glue point to slot glue point before the target is closed and the capsule deforms them. The variable r corresponds to the capsule outer radius. The variable L corresponds to the hohlraum inner radius. The variable a corresponds to the yarn offset from the center of the diagnostic band. The variable d corresponds to the wire deflection vertically.

42 ENGINEERING↗
DOE OSTI2022

A Design Method for Low-Pressure Venturi Nozzles

The purpose of this work is to provide empirical design models for low-pressure, subsonic Venturi nozzles. Experimentally validated simulations were used to determine the effect of nozzle geometry and operating conditions on the suction ratio (ratio of suction mass flow rate to motive mass flow rate) of low-pressure, subsonic Venturi nozzles, over a wide range of geometries and operating conditions, through a parametric study. The results of the parametric study were used to develop seven empirical models, each with a different range of applicability or calculating a different indicator of nozzle performance (i.e., suction ratio, momentum ratio, or dynamic pressure ratio), of the Venturi nozzles using a constrained multi-variable global optimization method. Of the seven empirical models, the best models were found to be those for low- (less than one) and high-suction ratios (greater than one), with mean absolute percentage errors of 5% and 18%, respectively. These empirical models provide a design tool for subsonic, low-pressure Venturi nozzles that is more than an order of magnitude more accurate than a governing equation approach or conventional flow head calculations. These newly-developed empirical models can be applied for initial nozzle design when precise suction ratios are required.

O’Hern, Hannah↗
DOE OSTI2024

Probabilistic Assessment of Structural Integrity

A probability-based approach, combining deterministic and probabilistic methods, was developed for analyzing building and component failures, which are especially crucial for complex structures like nuclear power plants. This method links finite element and probabilistic software to assess structural integrity under static and dynamic loads. This study uses NEPTUNE software, which is validated, for a deterministic transient analysis and ProFES software for probabilistic models. In a case study, deterministic analyses with varied random variables were transferred to ProFES for probabilistic analyses of piping failure and wall damage. A Monte Carlo Simulation, First-Order Reliability Method, and combined methods were employed for probabilistic analyses under severe transient loading, focusing on a postulated accident at the Ignalina Nuclear Power Plant. The study considered uncertainties in material properties, component geometry, and loads. The results showed the Monte Carlo Simulation method to be conservative for high failure probabilities but less so for low probabilities. The Response Surface/Monte Carlo Simulation method explored the impact load–failure probability relationship. Given the uncertainties in material properties and loads in complex structures, a deterministic analysis alone is insufficient. Probabilistic analysis is imperative for extreme loading events and credible structural safety evaluations.

Mathematics↗
NASA NTRS1973

Effect of Subsonic Inlet Lip Geometry on Predicted Surface and Flow Mach Number Distributions

The effect of subsonic inlet lip geometry on predicted surface and flow Mach number distributions is illustrated. The theoretical results were obtained from incompressible potential flow calculations corrected for compressibility. The major emphasis of this investigation is on the low-speed (takeoff and landing) operating conditions. The low-speed results were obtained for a range of three geometric variables of interest: contraction ratio, defined as the ratio of highlight area to throat area; internal lip major - to minor-axis ratio; and internal lip shape. The low-speed results were obtained at both static conditions and a free-stream velocity of 42.6m/sec, with incidence angles ranging from 0 deg to 50 deg. The results indicate that of the three geometric variables considered, contraction ratio had the largest effect on the surface Mach number distributions. The effects of inlet diameter ratio and blunting of the external forebody on maximum external surface Mach numbers are illustrated at a cruise Mach number of 0.8.

Albers, J. A.↗
NASA NTRS1976

Empirical models of high latitude electric fields

Model cross sections of the high latitude dawn-dusk electric field based on OGO-6 data are presented for the signature profiles, most frequently encountered for both + and -Y orientations of the interplanetary magnetic field. Line integrals give a total potential of 76 keV in each case. To illustrate extremes, examples of model cross-sections with total potentials of 23 keV and 140 keV are also given. Model convection patterns are also presented utilizing OGO-6 data on boundary locations at other magnetic local times. When this information is combined with characteristic field geometries in the region of the Harang discontinuity, and is supplemented by data from Ba+ cloud motions in the polar cap, it becomes possible to construct realistic convection patterns on the nightside which deviate from the usual sun-aligned patterns. The observational models presented are of limited applicability as a consequence of the variability of observed distributions. These limitations are emphasized with particular attention given to several types of recurrent deviations which have not previously been discussed.

Heppner, J. P.↗
NASA NTRS1985

A Numerical Method of Calculating Propeller Noise Including Acoustic Nonlinear Effects

Using the transonic flow fields(s) generated by the NASPROP-E computer code for an eight blade SR3-series propeller, a theoretical method is investigated to calculate the total noise values and frequency content in the acoustic near and far field without using the Ffowcs Williams - Hawkings equation. The flow field is numerically generated using an implicit three dimensional Euler equation solver in weak conservation law form. Numerical damping is required by the differencing method for stability in three dimensions, and the influence of the damping on the calculated acoustic values is investigated. The acoustic near field is solved by integrating with respect to time the pressure oscillations induced at a stationary observer location. The acoustic far field is calculated from the near field primitive variables as generated by NASPROP-E computer code using a method involving a perturbation velocity potential as suggested by Hawkings in the calculation of the acoustic pressure time-history at a specified far field observed location. the methodologies described are valid for calculating total noise levels and are applicable to any propeller geometry for which a flow field solution is available.

Korkan, K. D.↗
NASA NTRS1992

Analogy for the effect of material and geometrical variables on energy-absorption capability of composite tubes

Simplified procedures for determining the qualitative effect a variable has on structural response of a composite tube are very useful in both preliminary design as well as in providing insight into the general response. An analysis procedure is presented that can be used to determine the qualitative change in the sustained crushing load due to a change in specimen material properties or geometry. The analysis procedure is similar in form to the equation for the buckling load of a column on an elastic foundation.

Farley, Gary L.↗
NASA NTRS2006

Rotating-Pump Design Code

Pump Design (PUMPDES) is a computer program for designing a rotating pump for liquid hydrogen, liquid oxygen, liquid nitrogen, water, methane, or ethane. Using realistic properties of these fluids provided by another program called GASPAK, this code performs a station-by-station, mean-line analysis along the pump flow path, obtaining thermodynamic properties of the pumped fluid at each station and evaluating hydraulic losses along the flow path. The variables at each station are obtained under constraints that are consistent with the underlying physical principles. The code evaluates the performance of each stage and the overall pump. In addition, by judiciously choosing the givens and the unknowns, the code can perform a geometric inverse design function: that is, it can compute a pump geometry that yields a closest approximation of given design point. The code contains two major parts: one for an axial-rotor/inducer and one for a multistage centrifugal pump. The inducer and the centrifugal pump are functionally integrated. The code can be used in designing and/or evaluating the inducer/centrifugal-pump combination or the centrifugal pump alone. The code is written in standard Fortran 77.

Walker, James F.↗
DOE OSTI2019

Metallic Low-Level Waste (LLW) Handling Options: An Optimal Life cycle-Based Approach for North American Operations - 19413

Daily activities associated with nuclear power plant operations produce large volumes of low-level contaminated waste. During operation, a small percentage of this low-level waste is metallic (< 1% by volume). However, this figure increases materially when a facility is finally decommissioned, with approximately 1000 m{sup 3} of contaminated metal waste generated for every 1 GW decommissioned (13% by volume). With global nuclear decommissioning efforts expected to increase until 2050, the amount of low-level metallic waste generated is expected to increase the global inventory by over an order of magnitude. The high cost of conventional surface storage and burial of radioactive metal, coupled with the projected increase in low-level metallic waste volumes provides strong incentive to identify cost-effective waste management solutions. Surface decontamination and thermal methods are proven options for decontaminating low-level metallic waste. Surface decontamination processes include chemical, electrochemical, or mechanical methods, which are used to remove contamination from exposed layers of metal. Surface decontamination is most effective when metal has low levels of activity localized on the outer layers. When the activity is more uniformly distributed in the metal (or the geometry is complex), alternative methods such as thermal decontamination are required. In the thermal decontamination process, contaminated scrap metal is melted in a furnace and held in a molten state for a period of time while the radioactive material is separated out through gravity. Radioactive material reports to slag which is handled separately, or to the exhaust which is handled using conventional gas handling technologies. Thermal methods of decontamination involving metal melting present an opportunity to reduce long-term storage cost with a reduction in waste volume, along with the opportunity to reuse the decontaminated metal. Methods for dealing with metallic low-level waste from nuclear facilities vary extensively across the globe. The approach employed at any given site may be set by a host of factors ranging from regulatory influence, public perception, local economics, available geology for underground storage and often, precedent established long ago by early operations. This paper examines several low-level metallic waste handling options including techniques for surface decontamination and metal melting, as well as a combination of both. The various methods are categorized according to their suitability for waste characterization and local/global installations. The effectiveness of each option is benchmarked against a range of criteria, including capital and operating costs, environmental impact, overall sustainability and risk management issues. The overall objective of this paper is to develop a methodology for determining the most beneficial low-level metallic waste management strategy for a facility once the quantity, type and nature of the waste is established on a long-term basis. It is the authors' hope that the methodology can be used as a tool to test a facility's current plans (which are primarily focused on long-term storage) and identify areas for optimization with an emphasis on overall cost and environmental footprint reduction. The trend towards long term planning to handle large amounts of contaminated metal, along with obtaining a social license to implement a sustainable waste management solution, are key decision-making variables that will be discussed in relation to the LLW handling options presented in this paper. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1979

Geometries and focal properties of two electron-lens systems useful in low-energy electron or ion scattering

Geometries and focal properties are given for two types of electron-lens system commonly needed in electron scattering. One is an electron gun that focuses electrons from a thermionic emitter onto a fixed point (target) over a wide range of final energies. The other is an electron analyzer system that focuses scattered electrons of variable energy onto a fixed position (e.g., the entrance plane of an analyzer) at fixed energy with a zero final beam angle. Analyzer-system focusing properties are given for superelastically, elastically, and inelastically scattered electrons. Computer calculations incorporating recent accurate tube-lens focal properties are used to compute lens voltages, locations and diameters of all pupils and windows, filling factors, and asymptotic rays throughout each lens system. Focus voltages as a function of electron energy and energy change are given, and limits of operation of each system discussed. Both lens systems have been in routine use for several years, and good agreement has been consistently found between calculated and operating lens voltages.

Chutjian, A.↗
NASA NTRS1988

Efficient Jacobian inversion for the control of simple robot manipulators

Symbolic inversion of the Jacobian matrix for spherical wrist arms is investigated. It is shown that, taking advantage of the simple geometry of these arms, the closed-form solution of the system Q = J-1X, representing a transformation from task space to joint space, can be obtained very efficiently. The solutions for PUMA, Stanford, and a six-revolute-joint coplanar arm, along with all singular points, are presented. The solution for each joint variable is found as an explicit function of the singular points which provides a better insight into the effect of different singular points on the motion and force exertion of each individual joint. For the above arms, the computation cost of the solution is on the same order as the cost of forward kinematic solution and it is significantly reduced if forward kinematic solution is already obtained. A comparison with previous methods shows that this method is the most efficient to date.

Fijany, Amir↗
NASA NTRS1993

Probabilistic simulation of stress concentration in composite laminates

A computational methodology is described to probabilistically simulate the stress concentration factors in composite laminates. This new approach consists of coupling probabilistic composite mechanics with probabilistic finite element structural analysis. The probabilistic composite mechanics is used to probabilistically describe all the uncertainties inherent in composite material properties while probabilistic finite element is used to probabilistically describe the uncertainties associated with methods to experimentally evaluate stress concentration factors such as loads, geometry, and supports. The effectiveness of the methodology is demonstrated by using it to simulate the stress concentration factors in composite laminates made from three different composite systems. Simulated results match experimental data for probability density and for cumulative distribution functions. The sensitivity factors indicate that the stress concentration factors are influenced by local stiffness variables, by load eccentricities and by initial stress fields.

Chamis, C. C.↗
NASA NTRS1993

The Marshall Automated Weld System (MAWS)

A fully automated welding system, which can operate totally independent of human intervention, is currently unavailable in the welding industry. Development of the Marshall Automated Weld System (MAWS) has been undertaken to fill this void. The system will enable application of statistical process control practices to assure weld quality prior to post weld nondestructive testing. The Variable Polarity Plasma Arc (VPPA) welding process has been baselined for MAWS because it has eliminated process related defects in the welding of the Space Shuttle External Tank. The few remaining weld defects occurring on the tank can be associated with human error. The system integrates multiple sensors (providing real time information on weld bead geometry, weld joint location, wirefeed entry, and inert gas quality) with a weld model (describing weld geometry in relation to critical parameters) and computer-controlled VPPA weld equipment. This system is designed to provide real-time, closed-loop control of the weld as it is being made.

Russell, Carolyn K.↗
NASA NTRS1993

The Marshall Automated Weld System (MAWS)

A fully automated welding system, which can operate totally independent of human intervention, is currently unavailable in the welding industry. Development of the Marshall Automated Weld System (MAWS) has been undertaken to fill this void. The system will enable application of statistical process control practices to assure weld quality prior to post weld nondestructive testing. The Variable Polarity Plasma Arc (VPPA) welding process has been baselined for MAWS because it has eliminated process related defects in the welding of the Space Shuttle External Tank. The few remaining weld defects occurring on the tank can be associated with human error. The system integrates multiple sensors (providing real time information on weld bead geometry, weld joint location, wirefeed entry, and inert gas quality) with a weld model (describing weld geometry in relation to critical parameters) and computer controlled VPPA weld equipment. This system is designed to provide real-time, closed-loop control of the weld as it is being made.

Russell, Carolyn K.↗