Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transit Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Topological confinement in Skyrme holography

Abstract We study phase transitions in five-dimensional Einstein gravity with a negative cosmological constant, coupled to a Skyrme matter field. These transitions are topological generalizations of the Hawking–Page transition between thermal anti de Sitter (AdS) spacetime and an AdS black hole. Phases are characterized by a topological number associated with the Skyrme field configuration. Depending on that topological number and on the Skyrme coupling strength, there occur transitions between those phases at two, one, or no value(s) of the temperature. Through the holographic (AdS/CFT) correspondence, these solutions are dual to topologically non-trivial states in a conformal field theory with an SU (2)-symmetry, which support either confined or deconfined (quasi-)particles at strong coupling. We compare to similar known phase transitions, and discuss potential applications to confinement in topological phases of condensed matter and the quark–gluon plasma.

Astronomy & Astrophysics↗

Computational study of transition front on a swept wing leading-edge model

The e(N) method is employed with Navier-Stokes calculations to study 3D supersonic boundary layers at the leading-edge region of swept wings with attention given to the conditions for linear stability. Mean-flow profiles are computed as solutions to the Navier-Stokes equations, and the e(N) method is used to identify the onset of the transition. Specific treatment is given to the identification of parameters which affect the transition such as free-stream Reynolds number, wall cooling, and boundary-layer suction levels. The boundary layer can be stabilized to below N=10 levels in all locations by utilizing distributed suction, and enhanced stabilization can also be achieved by employing wall cooling and reduced free-stream Reynolds numbers. This study presents key calculations for corresponding experimental investigations by shedding light on requirements for test conditions and measurement requirements.

Iyer, Venkit↗

Interaction of a quantum well with squeezed light: Quantum-statistical properties

We investigate the quantum statistical properties of the light emitted by a quantum well interacting with squeezed light from a degenerate subthreshold optical parametric oscillator. We obtain analytical solutions for the pertinent quantum Langevin equations in the strong-coupling and low-excitation regimes. Using these solutions we calculate the intensity spectrum, autocorrelation function, and quadrature squeezing for the fluorescent light. We show that the fluorescent light exhibits bunching and quadrature squeezing. We also show that the squeezed light leads to narrowing of the width of the spectrum of the fluorescent light.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electric and magnetic black holes in a new nonlinear electrodynamics model

Highlights: • We introduce a new NED model which is comparable with the BI model in the weak-field limit. • We find an electric black hole solution in the context of Einstein’s gravity minimally coupled with the new NED model. • We study the thermal stability of the electric black hole solution. • Modified Smarr’s formula consistent with the first law of black hole thermodynamics is obtained. A new nonlinear electrodynamics (NED) model is introduced in the form of a nonpolynomial Lagrangian which admits static spherical and also plane wave solutions in a flat space. Upon coupling with gravity the electric field is finite and comparable with the Born–Infeld counterpart. The electric and magnetic black hole solutions in the Einstein’s gravity coupled with this NED model are presented. The solutions give both asymptotically and in the weak field limit Reissner–Nordström (RN) black hole and unlike the other known models our electric solution is expressed in terms of elementary functions in a closed form. We study the first law and derive the modified Smarr’s formula for the electric type extension of our model. Considerable rich structure, especially thermodynamic ones, ranging from first to the second order phase transitions are added to the RN black hole of linear electrodynamics with this NED model. Having the exact solution for the metric function at our disposal we investigate the stability of the electric black hole from both the thermodynamical and causal points of view.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Beyond the Debye–Hückel limit: Toward a general theory for concentrated electrolytes

The phenomenon of underscreening in concentrated electrolyte solutions leads to a larger decay length of the charge–charge correlation than the prediction of Debye–Hückel (DH) theory and has found a resurgence of both theoretical and experimental interest in the chemical physics community. To systematically understand and investigate this phenomenon in electrolytes requires a theory of concentrated electrolytes to describe charge–charge correlations beyond the DH theory. We review the theories of electrolytes that can transition from the DH limit to concentrations where charge correlations dominate, giving rise to underscreening and the associated Kirkwood Transitions (KTs). In this perspective, we provide a conceptual approach to a theoretical formulation of electrolyte solutions that exploits the competition between molecular-informed short-range (SR) and long-range interactions. We demonstrate that all deviations from the DH limit for real electrolyte solutions can be expressed through a single function ΣQ that can be determined both theoretically and numerically. Importantly, ΣQ can be directly related to the details of SR interactions and, therefore, can be used as a tool to understand how differences in representations of interaction can influence collective effects. The precise function form of ΣQ can be inferred through a Gaussian field theory of both the number and charge densities. The resulting formulation is validated by experiment and can accurately describe the collective phenomenon of screening in concentrated bulk electrolytes. Importantly, the Gaussian field theory predictions of the screening lengths appear to be less than ∼1 nm at concentrations above KTs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Removal of High Specific Activity Fission Products from Uranyl Sulfate Waste Solutions

The Savannah River National Laboratory (SRNL) is currently providing support to SHINE Medical Technologies (SHINE) which plans to deploy a low energy, accelerator-based neutron source to fission low enriched U in a uranyl sulfate target solution for 99 Mo production. The 99 Mo is initially separated from the fission products and target solution by an extraction column. Subsequent washing of the column will generate waste solutions containing residual U and fission product activity. A small number of high specific activity fission products (e.g., 90 Sr, 137 Cs, and 144 Ce) in these streams will likely control the classification of the low level waste (LLW). If a sufficient amount of the high specific activity isotopes are separated from the SHINE waste streams and concentrated into a waste form, it would be possible to treat a majority of the wash solutions from the column operations as a lower class of LLW (Class A versus Class B or C or Class B versus Class C). The high specific activity fission product elements could then be dispositioned as a much smaller volume of waste rather than requiring the disposal of the entire waste stream at the higher waste classification. The Savannah River Site (SRS) has experience with using monosodium titanate (MST) and crystalline silicotitanate (CST) to remove Cs and Sr from high salt content waste solutions generated during the reprocessing of nuclear fuels and targets. Both of these materials have worked very well for their intended purposes at the SRS where the fission product elements are removed from highly alkaline waste. On the other hand, SHINE waste streams from the extraction column contain H 2 SO 4 which makes the solution acidic. Additionally, the SRS waste streams do not contain other fission product elements such as transition metals or lanthanides because they precipitate upon neutralization of the SRS waste and are not present in the supernate which is dispositioned as LLW following treatment. As such, there are inherent differences between SHINE and SRS waste treatment strategies. Savannah River National Laboratory was tasked with performing scoping studies to see if MST and CST would remove Sr, Cs, and Ce from an acidic mixed metal simulant solution. Batch contact experiments were performed using MST and two CST type materials. The MST material is a 15 wt % powder in 0.15 M NaOH slurry. The MST showed low adsorption for elements of interest from acidic solution. Furthermore, the powder size makes MST non-ideal for column operations. A CST IE-911 ion exchange material had high Cs adsorption, moderate Sr, and marginal Ce adsorption. Based on adsorption of all species, the ion exchange capacity was found to be 0.032 meq/mL. A bench-top column experiment to measure elemental breakthrough curves was performed using CST IE-911 where chromatographic separations of the mixed simulant were expected to occur. While most elements behaved as expected, the lanthanide series, containing Ce, broke though the column earlier than expected. The second CST material, CST R9120, displayed high adsorption for all elements in the acidic mixed simulant solutions in a batch contact study, and had a calculated loading capacity of 0.091 meq/mL. Future studies to develop a waste treatment flowsheet should focus on CST R9120 to treat SHINE waste solutions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Extraction of electromagnetic transition form factors for nucleon resonances within a dynamical coupled-channels model

We explain the application of a recently developed analytic continuation method to extract the electromagnetic transition form factors for the nucleon resonances (N*) within a dynamical coupled-channel model of meson-baryon reactions. Illustrative results of the obtained N{sup *{yields}{gamma}}N transition form factors, defined at the resonance pole positions on the complex energy plane, for the well-isolated P{sub 33} and D{sub 13} and the complicated P{sub 11} resonances are presented. A formula was developed to give a unified representation of the effects due to the first two P{sub 11} poles, which are near the {pi}{Delta} threshold, but are on different Riemann sheets. We also find that a simple formula, with its parameters determined in the Laurent expansions of the {pi}N{yields}{pi}N and {gamma}N{yields}{pi}N amplitudes, can reproduce to a very large extent the exact solutions of the considered model at energies near the real parts of the extracted resonance positions. We discuss the important differences between our approach, which is consistent with the earlier formulations of resonances, and the phenomenological approaches using the Breit-Wigner parametrization of resonant amplitudes to fit the data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fixed-node diffusion Monte Carlo description of nitrogen defects in zinc oxide

Using the fixed-node diffusion Monte Carlo (FN-DMC) method, we evaluate the formation energies and charge transition levels of substitutional nitrogen defects in the wide-band-gap semiconductor zinc oxide. The use of a direct-solution, many-body approach inherently secures a good description of electron-electron interactions, achieving high accuracy without adjustable parameters. According to FN-DMC nitrogen is a deep acceptor with a charge transition level 1.0(3) eV above the valence-band maximum when 72-atom supercells are used. This result falls on the lower end of typically reported hybrid density functional results for the same size supercells, which range from 1.0 to 1.8 eV. Further, residual finite-size effects due to charged defect image interactions in the 72-atom supercells are estimated by supercell extrapolation within hybrid density functional theory. When the finite-size correction is included, we obtain a deep acceptor at 1.6(3) eV. This result is in good agreement with recent experimental measurements. We also analyze the local compressibility of charge according to FN-DMC and common density functionals and find that the use of hybrid functionals obtains compressibilities in better agreement with the many-body theory. Our work illustrates the application of the FN-DMC method to a challenging point defect problem, demonstrating that uncertainties and approximations can be well controlled.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Iron Alloying on the Properties of Vanadium Dioxide

Results of investigations of the x-ray structural parameters of the crystal lattice and their temperature dependences in the vicinities of the metal-dielectric phase transition for V{sub 1–x}Fe{sub x}O{sub 2} solid solutions are reported together with results of comparison of x-ray and pycnometric densities of these materials. The defect concentration in the materials under study is estimated at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An investigation of the Fe and Mo oxidation states in Sr[subscript 2]Fe[subscript 2]Mo[subscript x]O[subscript 6] (0.25 [less than] x [less than] 1.0) double perovskites by X-ray absorption spectroscopy

Sr{sub 2}FeMoO{sub 6} double perovskite systems are widely studied because of their interesting and technologically relevant physical properties. Sr{sub 2}FeMoO{sub 6} is just a single composition in the Sr{sub 2}Fe{sub 2-x}Mo{sub x}O{sub 6} solid-solution, and it is important to understand how the composition impacts the transition-metal valence states. Variations in the lattice parameters of these materials were studied using powder X-ray diffraction and it was found that a large change in the lattice constant occurs between Sr{sub 2}Fe{sub 1.50}Mo{sub 0.50}O{sub 6} and Sr{sub 2}Fe{sub 1.35}Mo{sub 0.65}O{sub 6} that likely coincides with a transition from a cubic to a tetragonal unit cell, in agreement with previous studies. Fe K- and Mo K-edge X-ray absorption near-edge spectra were also collected to investigate how the oxidation state and coordination environment change with composition. When the Mo content is low, Fe adopts a 3+ oxidation state and Mo adopts a 6+ oxidation state. As the Mo content is increased, the Fe and Mo cations are both partially reduced, resulting in a mixture of Fe{sup 3+} and Fe{sup 2+} and Mo{sup 5+} and Mo{sup 6+}. The reduction of the metal centers apparently drives the change in unit cell. The influence of preparation method on the oxidation states of Fe and Mo was also investigated by annealing the materials under vacuum. The results reported here show that the oxidation states of Fe and Mo are strongly impacted by both composition and preparation method, which may account for the wide variety of oxidation state and magnetic properties that have been reported previously.

36 MATERIALS SCIENCE↗

Diffusion bonding of 410 stainless steel to copper using a nickel interlayer

In the present work, plates of stainless steel (grade 410) were joined to copper ones through a diffusion bonding process using a nickel interlayer at a temperature range of 800-950 deg. C. The bonding was performed through pressing the specimens under a 12-MPa compression load and a vacuum of 10{sup -4} torr for 60 min. The results indicated the formation of distinct diffusion zones at both Cu/Ni and Ni/SS interfaces during the diffusion bonding process. The thickness of the reaction layer in both interfaces was increased by raising the processing temperature. The phase constitutions and their related microstructure at the Cu/Ni and Ni/SS diffusion bonding interfaces were studied using optical microscopy, scanning electron microscopy, X-ray diffraction and elemental analyses through energy dispersive spectrometry. The resulted penetration profiles were examined using a calibrated electron probe micro-analyzer. The diffusion transition regions near the Cu/Ni and Ni/SS interfaces consist of a complete solid solution zone and of various phases based on (Fe, Ni), (Fe, Cr, Ni) and (Fe, Cr) chemical systems, respectively. The diffusion-bonded joint processed at 900 deg. C showed the maximum shear strength of about 145 MPa. The maximum hardness was obtained at the SS-Ni interface with a value of about 432 HV.

36 MATERIALS SCIENCE↗

Synthesis and Properties of Poly-Ether/Ethylene Carbonate Electrolytes with High Oxidative Stability

New electrolyte designs are necessary for overcoming multiple challenges posed by emerging lithium-metal battery chemistries. Task-specific viscoelastic electrolytes are specifically required that are capable of simultaneously sustaining reversible electrochemistry at the Li metal anode, maintaining high oxidative stability at the battery cathode and achieving high room-temperature ionic conductivity in the electrolyte bulk. Here, we synthesize and study a series of polymeric electrolytes composed of poly-1,3-dioxolane (poly-DOL) networks formed by ring-opening polymerization of 1,3-dioxolane/ethylene carbonate (EC) mixtures by a commonly used LiPF 6 electrolyte salt. The complex kinetics of the DOL polymerization reaction in EC results in nonlinear phase behavior, including the appearance of a critical transition to an entangled, solid-like electrolyte state at 40% DOL. Additionally, the transition is mediated by a range of physicochemical regimes—from liquid-like solutions to highly viscous conducting gels. We show that poly-DOL/EC electrolytes with a high concentration of the DOL precursor exhibit improved electrochemical stability compared to conventional DOL-based electrolytes, while maintaining good room temperature ionic conductivity. We show further that the EC component imparts oxidative stability, enabling their use in rechargeable, room-temperature Li||LiNi 0.6 Co 0.2 Mn 0.2 O 2 electrochemical cells.

36 MATERIALS SCIENCE↗

Single Molecule Spectroscopy Studies of Acid–Base Chemical Gradients Using Nile Red as a Probe of Local Surface Acidity

Single molecule spectroscopy studies of local acidity along bifunctional acid-base gradients are reported. Gradients are prepared by directional vapor phase diffusion and subsequent reaction of 3-aminopropyl-trimethoxysilane with a uniform silica film. Gradient formation is confirmed by spectroscopic ellipsometry and by static water contact angle measurements. X-ray photoelectron spectroscopy is used to characterize the nitrogen content and degree of nitrogen protonation along the gradient. Nile Red is employed as the probe dye in single molecule spectroscopy studies of these gradients. While Nile Red is well-known for its solvent sensitivity, it is used here, for the first time, to sense the acid/base properties of the film in two-color wide-field fluorescence imaging experiments. The data reveal broad bimodal distributions of Nile Red emission spectra that vary along the gradient direction. The single-molecule results are consistent with solution-phase ensemble acid/base studies of the dye. The former reveal a gradual transition from a surface dominated by basic aminosilane sites at the high-amine end of the gradient to one dominated by acidic silanol sites at the low-amine end. The sub-diffraction-limited spatial resolution afforded by superlocalization of the single molecules reveals spatial correlations in the acid/base properties of the gradient over ~ 200 nm distances. Furthermore, these studies provide data relevant to the use of aminosilane-modified silica in bifunctional, cooperative chemical catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation and Luminescence Phenomena of LaF3:Ce3+ Nanoparticles and Lanthanide-Organic Compounds in Dimethyl Sulfoxide

LaF3:Ce3+ doped nanoparticles were synthesized at different temperatures in dimethyl sulfoxide by the chemical reaction of lanthanum nitrate hydrate and cerium nitrate hexahydrate with ammonium fluoride. The formation of Ce3+ doped LaF3 nanoparticles is confirmed by X-ray diffraction and high resolution transmission electron microscopy. An intense emission at around 310 nm from the d - f transition of Ce3+ was observed from the LaF3:Ce3+ powder samples. However, in solution samples, the ultraviolet emission from Ce3+ is mostly absent, but intense luminescence is observed in the visible range from blue to red. The emission wavelength of the solution samples is dependent on the reaction time and temperature. More interestingly, the emission wavelength varies with the excitation wavelength. Most likely, this emission is from the metalorganic compounds of Ce3+ or La3+ and DMSO as similar phenomena are also observed when lanthanum nitrate hydrate or cerium nitrate hexahydrate are heated in DMSO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Eight-band k·p modeling of InAs/InGaAsSb type-II W-design quantum well structures for interband cascade lasers emitting in a broad range of mid infrared

Band structure properties of the type-II W-design AlSb/InAs/GaIn(As)Sb/InAs/AlSb quantum wells have been investigated theoretically in a systematic manner and with respect to their use in the active region of interband cascade laser for a broad range of emission in mid infrared between below 3 to beyond 10 μm. Eight-band k·p approach has been utilized to calculate the electronic subbands. The fundamental optical transition energy and the corresponding oscillator strength have been determined in function of the thickness of InAs and GaIn(As)Sb layers and the composition of the latter. There have been considered active structures on two types of relevant substrates, GaSb and InAs, introducing slightly modified strain conditions. Additionally, the effect of external electric field has been taken into account to simulate the conditions occurring in the operational devices. The results show that introducing arsenic as fourth element into the valence band well of the type-II W-design system, and then altering its composition, can efficiently enhance the transition oscillator strength and allow additionally increasing the emission wavelength, which makes this solution prospective for improved performance and long wavelength interband cascade lasers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Overcoming potential energy distortions in constrained internal coordinate molecular dynamics simulations

The Internal Coordinate Molecular Dynamics (ICMD) method is an attractive molecular dynamics (MD) method for studying the dynamics of bonded systems such as proteins and polymers. It offers a simple venue for coarsening the dynamics model of a system at multiple hierarchical levels. For example, large scale protein dynamics can be studied using torsional dynamics, where large domains or helical structures can be treated as rigid bodies and the loops connecting them as flexible torsions. ICMD with such a dynamic model of the protein, combined with enhanced conformational sampling method such as temperature replica exchange, allows the sampling of large scale domain motion involving high energy barrier transitions. Once these large scale conformational transitions are sampled, all-torsion, or even all-atom, MD simulations can be carried out for the low energy conformations sampled via coarse grained ICMD to calculate the energetics of distinct conformations. Such hierarchical MD simulations can be carried out with standard all-atom forcefields without the need for compromising on the accuracy of the forces. Using constraints to treat bond lengths and bond angles as rigid can, however, distort the potential energy landscape of the system and reduce the number of dihedral transitions as well as conformational sampling. We present here a two-part solution to overcome such distortions of the potential energy landscape with ICMD models. To alleviate the intrinsic distortion that stems from the reduced phase space in torsional MD, we use the Fixman compensating potential. To additionally alleviate the extrinsic distortion that arises from the coupling between the dihedral angles and bond angles within a force field, we propose a hybrid ICMD method that allows the selective relaxing of bond angles. This hybrid ICMD method bridges the gap between all-atom MD and torsional MD. We demonstrate with examples that these methods together offer a solution to eliminate the potential energy distortions encountered in constrained ICMD simulations of peptide molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of the size of nanoparticles on their dissolution within metal-glass nanocomposites under sustained irradiation

We investigate the dissolution law of metallic nanoparticles (NPs) under sustained irradiation. The system is composed of isolated spherical gold NPs (4–100 nm) embedded in an amorphous silica host matrix. Samples are irradiated at room temperature in the nuclear stopping power regime with 4 MeV Au ions for fluences up to 8 × 10{sup 16 }cm{sup −2}. Experimentally, the dependence of the dissolution kinetics on the irradiation fluence is linear for large NPs (45–100 nm) and exponential for small NPs (4–25 nm). A lattice-based kinetic Monte Carlo (KMC) code, which includes atomic diffusion and ballistic displacement events, is used to simulate the dynamical competition between irradiation effects and thermal healing. The KMC simulations allow for a qualitative description of the NP dissolution in two main stages, in good agreement with the experiment. Moreover, the perfect correlation obtained between the evolution of the simulated flux of ejected atoms and the dissolution rate in two stages implies that there exists an effect of the size of NPs on their dissolution and a critical size for the transition between the two stages. The Frost-Russell model providing an analytical solution for the dissolution rate, accounts well for the first dissolution stage but fails in reproducing the data for the second stage. An improved model obtained by including a size-dependent recoil generation rate permits fully describing the dissolution for any NP size. This proves, in particular, that the size effect on the generation rate is the principal reason for the existence of two regimes. Finally, our results also demonstrate that it is justified to use a unidirectional approximation to describe the dissolution of the NP under irradiation, because the solute concentration is particularly low in metal-glass nanocomposites.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transition from Townsend to radio-frequency homogeneous dielectric barrier discharge in a roll-to-roll configuration

The aim of this paper is to better understand the transition from Townsend to radio-frequency homogeneous dielectric barrier discharge (DBD) at atmospheric pressure. The study is done in an Ar/NH{sub 3} Penning mixture for an electrode configuration adapted to roll-to-roll plasma surface treatment. The study was led in a frequency range running from 50 kHz up to 8.3 MHz leading to different DBD modes with a 1 mm gas gap: Glow (GDBD), Townsend (TDBD), and Radio-frequency (RF-DBD). In the frequency range between TDBD and RF-DBD, from 250 kHz to 2.3 MHz, additional discharges are observed outside the inter-electrode gas gap. Because each high voltage electrode are inside a dielectric barrel, these additional discharges occur on the side of the barrel where the gap is larger. They disappear when the RF-DBD mode is attained in the 1 mm inter-electrode gas gap, i.e., for frequencies equal or higher than 3 MHz. Fast imaging and optical emission spectroscopy show that the additional discharges are radio-frequency DBDs while the inter-electrode discharge is a TDBD. The RF-DBD discharge mode is attained when electrons drift becomes low enough compared to the voltage oscillation frequency to limit electron loss at the anode. To check that the additional discharges are due to a larger gas gap and a lower voltage amplitude, the TDBD/RF-DBD transition is investigated as a function of the gas gap and the applied voltage frequency and amplitude. Results show that the increase in the frequency at constant gas gap or in the gas gap at constant frequency allows to obtain RF-DBD instead of TDBD. At low frequency and large gap, the increase in the applied voltage allows RF-DBD/TDBD transition. As a consequence, an electrode configuration allowing different gap values is a solution to successively have different discharge modes with the same applied voltage.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗