Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Charge density wave and superconductivity in the disordered Holstein model

The interplay between electron-electron correlations and disorder has been a central theme of condensed matter physics over the past several decades, with particular interest in the possibility that interactions might cause delocalization of an Anderson insulator into a metallic state, and the disrupting effects of randomness on magnetic order and the Mott phase. In this work, we extend this physics to explore electron-phonon interactions and show, via exact quantum Monte Carlo simulations, that the suppression of the charge density wave correlations in the half-filled Holstein model by disorder can stabilize a superconducting phase. Our simulations thus capture qualitatively the suppression of charge ordered phases and emergent superconductivity recently seen experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of Amplification Properties of the Superconducting-Ferromagnetic Transistor

Here we report on the measurement results of the superconducting-ferromagnetic transistors (SFTs). The devices were made at Northwestern University and Hypres (SeeQC), Inc. (Nevirkovets et al., 2014; 2015). SFT is a multiterminal device with the SIS'FIFS (or SFIFS'IS) structure (where S, I, and F denote a superconductor, an insulator, and a ferromagnetic material, respectively) exploiting intense quasiparticle injection in order to modify the nonlinear I-V curve of a superconducting tunnel junction. SFT is capable of providing voltage, current, and power amplification while having good input/output isolation. We characterized the devices using different measurement techniques. We measured S parameters of the single- and double-acceptor devices at frequencies up to 5 MHz. Importantly, we confirmed that the isolation between the input and output of the device is quite good. However, the techniques typically employed to characterize semiconductor devices do not allow for revealing the full potential of our low-resistive SFT devices, especially those having two acceptors. In the latter case, we also tested the devices using the battery-powered current sources with floating grounds. Analyzing double-acceptor I-V curves recorded at different levels of injection currents, for an optimal load, we deduced a small-signal voltage gain of 33 and a power gain of 2.4. We suggest that further improvement of the SFT device parameters is possible in optimized devices, so that the device potentially may serve as a preamplifier for readout of output signals of cryogenic detectors and be useful as an element of other superconductor-based circuits. In addition, we used scanning transmission electron microscopy to identify some problems in the fabrication of the devices without any planarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Monolayer Superconductivity and Tunable Topological Electronic Structure at the Fe(Te,Se)/Bi 2 Te 3 Interface

The interface between 2D topological Dirac states and an s-wave superconductor is expected to support Majorana-bound states (MBS) that can be used for quantum computing applications. Realizing these novel states of matter and their applications requires control over superconductivity and spin-orbit coupling to achieve spin-momentum-locked topological interface states (TIS) which are simultaneously superconducting. While signatures of MBS have been observed in the magnetic vortex cores of bulk FeTe 0.55 Se 0.45 , inhomogeneity and disorder from doping make these signatures unclear and inconsistent between vortices. In this work, superconductivity is reported in monolayer (ML) FeTe 1–y Se y (Fe(Te,Se)) grown on Bi 2 Te 3 by molecular beam epitaxy (MBE). Spin and angle-resolved photoemission spectroscopy (SARPES) directly resolve the interfacial spin and electronic structure of Fe(Te,Se)/Bi 2 Te 3 heterostructures. For y = 0.25, the Fe(Te,Se) electronic structure is found to overlap with the Bi 2 Te 3 TIS and the desired spin-momentum locking is not observed. In contrast, for y = 0.1, reduced inhomogeneity measured by scanning tunneling microscopy (STM) and a smaller Fe(Te,Se) Fermi surface with clear spin-momentum locking in the topological states are found. Hence, it is demonstrated that the Fe(Te,Se)/Bi 2 Te 3 system is a highly tunable platform for realizing MBS where reduced doping can improve characteristics important for Majorana interrogation and potential applications.

36 MATERIALS SCIENCE↗

Chemical Profiles of the Oxides on Tantalum in State of the Art Superconducting Circuits

Abstract Over the past decades, superconducting qubits have emerged as one of the leading hardware platforms for realizing a quantum processor. Consequently, researchers have made significant effort to understand the loss channels that limit the coherence times of superconducting qubits. A major source of loss has been attributed to two level systems that are present at the material interfaces. It is recently shown that replacing the metal in the capacitor of a transmon with tantalum yields record relaxation and coherence times for superconducting qubits, motivating a detailed study of the tantalum surface. In this work, the chemical profile of the surface of tantalum films grown on c‐plane sapphire using variable energy X‐ray photoelectron spectroscopy (VEXPS) is studied. The different oxidation states of tantalum that are present in the native oxide resulting from exposure to air are identified, and their distribution through the depth of the film is measured. Furthermore, it is shown how the volume and depth distribution of these tantalum oxidation states can be altered by various chemical treatments. Correlating these measurements with detailed measurements of quantum devices may elucidate the underlying microscopic sources of loss.

36 MATERIALS SCIENCE↗

Optical investigations of the superconducting energy gap in b00-(BEDT-TTF)2SF5CH2CF2SO3

The organic salt {beta}''-(BEDT-TTF){sub 2}SF{sub 5}CH{sub 2}CF{sub 2}SO{sub 3} is a two-dimensional metal with a quarter-filled conduction band. In the metallic state the optical conductivity evidences interaction of the charge carriers with charge-order fluctuations that become stronger as temperature decreases. In the superconducting phase below T{sub c} {approx} 5K, indications of the superconducting gap with 2{Delta} {approx} 12 cm{sup -1} are observed in the optical spectrum, corresponding to 2{Delta}/k{sub B}T{sub c} {approx} 3.3. Its temperature and magnetic field dependences are also consistent with predictions by the BCS theory of a weakly coupled superconductor. The conductivity ratio {sigma}{sub 1}(T = 1.75 K)/{sigma}{sub 1}(10 K) indicates the opening of the superconducting gap in {beta}''-(BEDT-TTF){sub 2}SF{sub 5}CH{sub 2}CF{sub 2}SO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stability of superconducting strings

We investigate the stability of superconducting strings as bound states of strings and fermion zero modes at both the classical and quantum levels. The dynamics of these superconducting strings can result in a stable configuration, known as a vorton . We mainly focus on global strings, but the majority of the discussion can be applied to local strings. Using lattice simulations, we study the classical dynamics of superconducting strings and confirm that they relax to the vorton configuration through Nambu-Goldstone boson radiation, with no evidence of over-shooting that would destabilize the vorton. We explore the tunneling of fermion zero modes out of the strings. Both our classical analysis and quantum calculations yield consistent results: the maximum energy of the zero mode significantly exceeds the fermion mass, in contrast to previous literature. Additionally, we introduce a world-sheet formalism to evaluate the decay rate of zero modes into other particles, which constitute the dominant decay channel. We also identify additional processes that trigger zero-mode decay due to non-adiabatic changes of the string configuration. In these decay processes, the rates are suppressed by the curvature of string loops, with exponential suppression for large masses of the final states. We further study the scattering with light charged particles surrounding the string core produced by the zero-mode current and find that a wide zero-mode wavefunction can enhance vorton stability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconducting Multilayer High-Density Flexible Printed Circuit Board for Very High Thermal Resistance Interconnections

We have successively developed two superconducting flexible PCBs for cryogenic applications. The first one is monolayer, includes 552 tracks (10 µm wide, 20 µm spacing), and receives 24 wire-bonded integrated circuits. The second one is multilayer, with one track layer between two shielding layers interconnected by microvias, includes 37 tracks, and can be interconnected at both ends by wire bonding or by connectors. The first cold measurements have been performed and show good performances. The novelty of these products is, for the first one, the association of superconducting materials with very narrow pitch and bonded integrated circuits and, for the second one, the introduction of a superconducting multilayer structure interconnected by vias which is, to our knowledge, a world-first.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of the Superconducting Microwave Properties of Aluminum Manganese

A microwave kinetic inductance detector (MKID) is a superconducting pair breaking detector that offers a number of unique advantages for realizing large-format arrays of ultra-sensitive detectors, such as inherent multiplexibility and relative ease of fabrication. With the detection threshold being set by the Cooper pair binding energy, and correspondingly, the superconducting critical temperature (T c ), typically well-understood MKID materials such as aluminum (Al) present a lower limit on the operating frequency. Aluminum manganese (Al-Mn) is a promising candidate material for MKIDs because it can be fabricated with nearly identical processing as pure Al, but allows for control of the T c , with varying levels of Mn doping or post-deposition heat treatment. In this study, we present initial results from an early characterization of AlMn using a series of lumped-element superconducting microwave resonators, including measurements of T c , internal quality factor, and noise performance over a range of Mn doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimization of FeSe Superconducting Tapes with Different Sheath Materials and Precursor Powders

FeSe superconducting tapes with different sheath materials of Nb/Cu composite, Ag, and Fe have been fabricated with a traditional in situ powder-in-tube (PIT) process, respectively. With the same cold working process and heat treatment, the influences of different sheath materials on the phase composition and microstructures of FeSe filaments have been analyzed. Due to the reaction between Nb-Se and Ag-Se, Nb{sub 2}Se and Ag{sub 2}Se particles can be clearly observed embedded in the filaments. Therefore, it is necessary to introduce a new method for the fabrication of Ag or Nb sheath FeSe wires in order to avoid the introduction of metal Fe in magnet system during practical applications. Based on our previous study, a high-energy ball milling process has been performed to achieve precursor powders with amorphous FeSe binary compound instead of elemental Se. The formation of Ag-Se compounds has been successfully avoided and the superconducting tapes with high superconducting FeSe critical temperature of 9.0 K have been obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculation of AC Magnetizing Loss of ReBCO Superconducting Tapes Subjected to Applied Distorted Magnetic Fields

In recent years, there are fast-increasing concerns on the utilizations of superconducting rotating electrical machines in different application areas, such as ship propulsion systems, aircraft drivers, and wind turbine generators, since these machines exhibit the merits of high current density, compact design, high power density, light weight, high torque density as well as high efficiency. One of the main limitations in front of the vast use of superconducting tapes in the fabrication of electrical machineries is AC magnetizing loss when tapes are exposed to an external magnetic field, which can decrease the critical current density of wires, as well. In the literature, most of the research works have been done on calculation of the AC magnetizing loss under a pure external magnetic field, while in reality, magnetic flux lines in AC electrical machines are usually distorted with harmonics because of different reasons such as distorted leakage flux, distributed coils of a winding in several slots, cogging fields, mechanical faults, etc. Since these distorted fields contain harmonics, then in this paper, the AC magnetizing loss of superconducting tapes has been electromagnetically modeled and calculated when they are subjected to nonsinusoidally distorted external magnetic fields. The magnetic field dependency of critical current density has been considered in a proposed finite element model. The results have shown that the AC magnetizing loss increases significantly under a distorted applied field compared with a sinusoidal one. In addition, the loss increase depends on the harmonic content which would increases drastically with total harmonic distortion of the applied magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and Thermal Design of HTS Quadrupole Magnet for Newly Developed Superconducting Proton Cyclotron Beam Line

A magnetic and thermal design of high-temperature superconducting (HTS) quadrupole magnet for newly developed superconducting proton cyclotron was presented in this research. With superconducting technology, the design can reduce the magnet size and remove the heat loads more efficiently. Calculations are conducted with finite element method (FEM) to study the quadrupole magnet’s magnetic and thermal properties. For the magnet cold-mass and cryostat system, the heat load is mainly generated by conduction and radiation. Multilayer thermal insulation and G10 supports are used to restrict them. The magnetic field distribution in the HTS coils is calculated to consider the critical current degradation of the YBCO tapes. The effects on the field gradient quality in relation to the pole tip profile and end chamfer are analyzed. The sixth multipole component in the integral field can be improved with end chamfer. Finally, a 20 T/m HTS quadrupole magnet with integral field uniformity less than 0.05% out to 75% of the inscribed radius is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconductivity in Oxides Generated by Percolating Electron or Hole Bipolarons

It is remarkable that in over three decades since the discovery of high-temperature superconductivity (HTS) in cuprates, no other class of materials has been found to exhibit this property above the liquid nitrogen boiling point at ambient pressure. Here, we describe the conformation of hole and electron bipolarons in doped cuprates and tungstates. Important similarities and differences between them are discussed. Both hole and electron bipolarons can percolate forming filaments or clusters in the bulk or on the surfaces as well. Upon cooling, these electronic objects can show superconducting properties. It is proposed that oxygen-reduced tungsten oxide WO{sub 3−x} in bulk or thin film form is a promising material to explore the HTS. Such material would be another example of bipolaronic superconductivity similar to cuprates. However, there is also an important difference: in the cuprates, holes predominantly enter the oxygen orbitals and hole bipolarons are composed of three-spin polarons, whereas in the tungstates, doped electrons are located on tungsten ions and W{sup 5+}–O{sup 2−}–W{sup 5+}electron bipolarons form from 5d{sup 1} W{sup 5+} polarons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pair Breaking, Pseudogap, and Superconducting T{sub c} of Hole-Doped Cuprates: Interrelations and Implications

Irrespective of the class they belong to, all the hole-doped high-transition temperature (T{sub c}) cuprate superconductors show an anticorrelation between the superconducting transition temperature and the characteristic pseudogap energy in the underdoped region. The doping-dependent pseudogap in the quasiparticle spectral density is believed to remove low-energy electronic states and thereby reduce the superconducting condensate. Impurities within the CuO{sub 2} plane, on the other hand, break Cooper pairs in the unitarity limit and diminish superfluid density. Both pseudogap in pure cuprates and impurity scattering in disordered cuprates reduces T{sub c} very effectively. In this study, we have compared and contrasted the mechanisms of T{sub c} degradation due to pseudogap and impurity scattering in hole-doped cuprates. We have suggested a framework where both these factors can be treated on somewhat equal footing. Beside impurity and pseudogap-dependent superconducting transition temperature, the proposed scenario has been employed to investigate the disorder and hole content-dependent isotope exponent in high-T{sub c} cuprates in this work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconducting Coplanar Waveguide Resonators Capable of Cofabrication with Josephson Junctions

Superconducting coplanar waveguide resonators and Josephson junctions are crucial components of superconducting quantum information processing chips. Resonators are usually fabricated through lift-off or etching, while Josephson junctions are made by trilayer process or double-angle evaporation. To simplify the fabrication process, we propose a scheme that uses the same process steps for both Josephson junctions and resonators. Simulations and experiments are conducted to confirm that resonators fabricated via the proposed process have quality factor comparable to those via traditional process. This work paves the way for quantum information processing on superconducting large-scale integrated circuits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of Superconducting Properties and Diffusion Behavior of Ex Situ and In Situ Bulk MgB{sub 2} Materials with Ni Coating

Ex situ and in situ bulk MgB{sub 2} superconducting materials have successfully been produced by the simple amorphous boron and nano-amorphous boron powders with the processes of ball milling, pressing, and annealing. The superconducting properties and diffusion behavior of MgB{sub 2} samples after nickel (Ni) coating process have been characterized and compared to the microstructure and performance of uncoated (bare) MgB{sub 2} bulk sample. One surface of MgB{sub 2} superconductor sample was coated with a thin Ni layer of about 50 − 60μm thickness using vapor deposition techniques in versatile high vacuum coater, then every sample was annealed at temperatures between 923 and 1123 K for 1 h. The role of annealing temperature on physical, electrical, superconducting, and structural characterizations of bare and Ni-coated ex situ/in situ MgB{sub 2} bulk superconductors has been studied using X-ray diffraction and dc electrical resistivity versus temperature measurements. Finally, the Ni diffusion coefficients (D{sub Ni} = D{sub 0}exp(E/k{sub B}T)) are calculated in the temperature range to calculate the required minimum activation energy value for the Ni atoms/ions into the ex situ MgB{sub 2} crystal structure for the first time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effect of Zinc on the Structural, Electrical, and Mechanical Properties of YBCO-123 Superconducting Nanoparticles Prepared by an Acetate-Based Sol-Gel Process

In this study, zinc (Zn)-doped YBaCuO (YBCO)-123-based high-temperature superconducting samples were produced using the sol-gel method, which is commonly used for preparing nanosize materials. Zn ions were substituted by Cu ions (YBa{sub 2}Cu{sub 3-x}Zn{sub x}O), and Zn doping effects on structural, electrical, and mechanical properties of the YBCO-123 superconductors were examined in detail. Undoped sample was prepared under same conditions. X-ray diffraction analysis (XRD) was used to determine phase analysis and lattice parameters of the superconducting samples. To analyze the microstructure properties, scanning electron microscope (SEM) measurements were performed. Resistivity and microhardness measurements were also carried out for superconducting and mechanic properties, respectively. Vickers microhardness, young modulus, fracture toughness, and yield strength values of the samples were calculated. Microhardness measurements were analyzed using the Kick’s law, proportional sample resistance (PSR) model, EPD model, the Hays-Kendall (HK) approach, and indentation-induced cracking (IIC) model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlating aluminum layer deposition rates, Josephson junction microstructure, and superconducting qubits’ performance

An ultra-thin aluminum oxide layer is a key component for Josephson junctions (JJ) in superconducting quantum bits (qubits). This layer serves as a barrier layer for Cooper pairs tunneling between the superconducting electrodes and significantly influences the overall performance of the junction. In this study, we investigate the impact of aluminum deposition rates on the microstructure and chemical variation of the aluminum oxide layer, as well as the device's yields and qubits’ lifetimes. Surprisingly, although the oxide layer roughness and thickness variation improve noticeably with an increasing Al deposition rate from 0.5 Å/s to 5 Å/s, the qubit's coherence time is almost unchanged. We attribute this to the fact that Cooper pairs tunnel only through the thinnest region of the barrier. Additionally, we revealed a stress-induced grain boundary sliding short-circuit failure mechanism in the JJ. Our discovery provides a vital understanding of oxide microstructure and JJ functionality, which are critical for improving the coherence time of superconducting qubits.

Coherence time↗

Moiré superconductivity

Recently, superconductivity was discovered at very low densities in slightly misaligned graphene multilayers. Surprisingly, despite extremely low electronic density (about 10 –4 electrons per unit cell), these systems realize strong-coupling superconductivity, with the transition temperature being a large fraction of the Fermi energy $(T_C ~ 0.1_{ϵ_{F}})$. In this work, we propose a qualitative explanation for this remarkable phenomenon, highlighting similarities and qualitative differences with the conventional uniform high-density superconductivity. Most importantly, we find that periodic superimposed potential generically enhances local interactions relative to nonlocal (for instance, Coulomb) interactions. In addition, the density of states is enhanced as well, exponentially in modulation strength for low lying bands in some cases. Combination of these two effects makes moiré systems natural intermediate or strong-coupled superconductors, with potential for very high transition temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗