SEARCH · Engineering Papers

Results for “Structural dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Physical conditions near red giant and supergiant stars - An interpretation of SiO VLBI maps

Understanding the dynamical structure of circumstellar envelopes around cool giant and supergiant stars depends critically on the knowledge of what happens in the 'near zone' of the envelope, within a few stellar radii of the star. One probe with adequate angular resolution to study the near zone is VLBI observation of the SiO masers. It is shown that VLBI maps of VX Sgr establish that the particle density in the SiO masers is very high (about 10 to the 12th/cu cm), indicating that the masers form in dense cloudlets and not in a spherically expanding wind. The implications of these results for the mechanism of mass loss are discussed.

Alcock, Charles↗

NASA NTRS1986

Line-of-sight performance improvement with reaction-wheel isolation

Design techniques used to isolate and damp vibrations from the reaction control wheels assembly (RCA) from the structural dynamics of the Hubble Space Telescope are described. The four RCAs can generate sufficient torque for large maneuvers and precision control during fine pointing. The RCAs are to operate continuously during observations and thereby pose the potential of inducing jitter. The image stability must be constrained to less than 0.007 arcsec rms per 24 hr and pointing accuracy must be 0.01 arcsec for 100 hr. Vibration-producing characteristics of the RCAs are identified, and test results are provided from measurements of the magnitudes of the associated disturbances. Design features and test results for the vibration isolators employed with the RCAs to effect viscous damping of RCA axial perturbations are presented. The dampers are expected to reduce jitter effects of RCA operation by a half.

Rodden, J. J.↗

NASA NTRS1987

Aeroelastic analysis of launch vehicles in transonic flight

A numerical study of the aeroelastic stability of launch vehicles in transonic flight is performed. The unsteady aerodynanic flowfield about the vehicle is simulated using the three dimensional Reynolds-Averaged Navier-Stokes equations with the account for turbulent mixing done by a two-layer algebraic eddy viscosity model. The structural-dynamic formulation considers free-free flexural vibration of an elongated beam with variable properties and the equations are cast in modal form. The two sets of equations are integrated simultaneously in time, after a initial perturbation, to ascertain the aeroelastic stability of a given configuration. The method propossed is described in detail, and results that illustrate its application are presented.

Azevedo, Joao Luiz F.↗

NASA NTRS1987

Experience in distributed parameter modeling of the Spacecraft Control Laboratory Experiment (SCOLE) structure

The Spacecraft Control Laboratory Experiment (SCOLE) configuration is used to compare exact and approximate solutions of the partial differential equations which define its structural dynamics. The need for a proof model for evaluating competing control laws demands that solutions be generated which not only exhibit accurate modal characteristics, but precise static deflections as well. Because precise pointing is required, the motion of the end bodies of the Shuttle-attached antenna must be known with great accuracy. Modal models are attractive because of their stable solutions but require hundreds of modes to obtain a static deflection accuracy of only one percent. Although proportional damping in bending agrees well with experimental results using the SCOLE experimental apparatus, modes which involve both torsion and bending differ significantly from proportional damping. A lumped mass model is used to generate exact static deflections, but only approximate modal characteristics. Asymptotic solutions to the distributed parameter system approximate very accurately the modal characteristics at high mode numbers. Ways are examined for refining the approximate solutions by applying a first-order variation and by employing singular perturbation techniques which are usually limited to ordinary differential equations. The most accurate solutions of the distributed parameter model of SCOLE are obtained by combining exact and asymptotic solutions.

Taylor, L. W.↗

NASA NTRS1986

Blade loss transient dynamics analysis, volume 2. Task 2: TETRA 2 user's manual

This is the user's manual for the TETRA 2 Computer Code, a program developed in the NASA-Lewis Blade Loss Program. TETRA 2 calculates a turbine engine's dynamic structural response from applied stimuli. The calculation options are: (1) transient response; and (2) steady state forced response. Based on the method of modal syntheses, the program allows the use of linear, as well as nonlinear connecting elements. Both transient and steady state options can include: flexible Bladed Disk Module, and Nonlinear Connecting Elements (including deadband, hardening/softening spring). The transient option has the additional capability to calculate response with a squeeze film bearing module. TETRA 2 output is summarized in a plotfile which permits post processing such as FFT or graphical animation with the proper software and computer equipment.

Black, Gerald↗

NASA NTRS1987

Concurrent algorithms for transient nonlinear FE analysis

A two-parameter class of time-stepping algorithms for nonlinear structural dynamics is investigated. What sets the present method apart from other concurrent algorithms is the fact that it can be used to some advantage in sequential machines as well. Thus, substantial speed-ups are obtained on a single processor as the number of subdomains is increased. An additional O(p) speed-up is obtained when p processors are utilized. The test case discussed is being repeated for a mesh comprising four times as many elements, in an effort to understand how the large scale asymptotic speed-ups are attained. A three dimensional example involving finite deformations and free body motions is also being pursued. A code optimized for concurrency in the Alliant FX8 computer is being finalized. This will provide the means for testing the performance of the algorithm in a multiprocessor environment.

Ortiz, M.↗

NASA NTRS1987

Design and assembly sequence analysis of option 3 for CETF reference space station

A design and assembly sequence was conducted on one option of the Dual Keel Space Station examined by a NASA Critical Evaluation Task Force to establish viability of several variations of that option. A goal of the study was to produce and analyze technical data to support Task Force decisions to either examine particular Option 3 variations in more depth or eliminate them from further consideration. An analysis of the phasing assembly showed that use of an Expendable Launch Vehicle in conjunction with the Space Transportation System (STS) can accelerate the buildup of the Station and ease the STS launch rate constraints. The study also showed that use of an Orbital Maneuvering Vehicle on the first flight can significantly benefit Station assembly and, by performing Station subsystem functions, can alleviate the need for operational control and reboost systems during the early flights. In addition to launch and assembly sequencing, the study assessed stability and control, and analyzed node-packaging options and the effects of keel removal on the structural dynamics of the Station. Results of these analyses are presented and discussed.

Garrett, L. Bernard↗

NASA NTRS1988

Comprehensive rotorcraft analysis methods

The development and application of comprehensive rotorcraft analysis methods in the field of rotorcraft technology are described. These large scale analyses and the resulting computer programs are intended to treat the complex aeromechanical phenomena that describe the behavior of rotorcraft. They may be used to predict rotor aerodynamics, acoustic, performance, stability and control, handling qualities, loads and vibrations, structures, dynamics, and aeroelastic stability characteristics for a variety of applications including research, preliminary and detail design, and evaluation and treatment of field problems. The principal comprehensive methods developed or under development in recent years and generally available to the rotorcraft community because of US Army Aviation Research and Technology Activity (ARTA) sponsorship of all or part of the software systems are the Rotorcraft Flight Simulation (C81), Dynamic System Coupler (DYSCO), Coupled Rotor/Airframe Vibration Analysis Program (SIMVIB), Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics (CAMRAD), General Rotorcraft Aeromechanical Stability Program (GRASP), and Second Generation Comprehensive Helicopter Analysis System (2GCHAS).

Stephens, Wendell B.↗

NASA NTRS1988

Multigrid for structures analysis

In structural dynamics the equations are usually expressed as finite elements. Neighbor elements need not be connected. The process of condensing a fine model into a coarse model and interpolating the low-frequency solution to the fine model is studied.

Kascak, Albert F.↗

NASA NTRS1988

Mentat: An object-oriented macro data flow system

Mentat, an object-oriented macro data flow system designed to facilitate parallelism in distributed systems, is presented. The macro data flow model is a model of computation similar to the data flow model with two principal differences: the computational complexity of the actors is much greater than in traditional data flow systems, and there are persistent actors that maintain state information between executions. Mentat is a system that combines the object-oriented programming paradigm and the macro data flow model of computation. Mentat programs use a dynamic structure called a future list to represent the future of computations.

Grimshaw, Andrew S.↗

NASA NTRS1987

Technologies applicable to space tethers

An investigation is presented of technologies which have been accumulated over the years, both on Earth and in space, dealing with tethers, ropes and cables. Many of these technologies can be applied, with modification, to both on-going and future space tether research and demonstration missions. The major areas of tether research and technology developments presented include multimegawatt power transmission, materials and structures, dynamics and control, environmental interactions, and in-space operations. These major topical areas are presented within the context of their associated research program or study.

Baracat, William A.↗

NASA NTRS1988

The 15-meter antenna performance optimization using an interdisciplinary approach

A 15-meter diameter deployable antenna has been built and is being used as an experimental test system with which to develop interdisciplinary controls, structures, and electromagnetics technology for large space antennas. The program objective is to study interdisciplinary issues important in optimizing large space antenna performance for a variety of potential users. The 15-meter antenna utilizes a hoop column structural concept with a gold-plated molybdenum mesh reflector. One feature of the design is the use of adjustable control cables to improve the paraboloid reflector shape. Manual adjustment of the cords after initial deployment improved surface smoothness relative to the build accuracy from 0.140 in. RMS to 0.070 in. Preliminary structural dynamics tests and near-field electromagnetic tests were made. The antenna is now being modified for further testing. Modifications include addition of a precise motorized control cord adjustment system to make the reflector surface smoother and an adaptive feed for electronic compensation of reflector surface distortions. Although the previous test results show good agreement between calculated and measured values, additional work is needed to study modelling limits for each discipline, evaluate the potential of adaptive feed compensation, and study closed-loop control performance in a dynamic environment.

Grantham, William L.↗

NASA NTRS1987

Preliminary flight assessment of the X-29A advanced technology demonstrator

Several new technologies integrated on the X-29A advanced technology demonstrator are being evaluated for the next generation of fighter aircraft. Some of the most noteworthy ones are the forward-swept wing, digital fly-by-wire flight control system, close-coupled wing-canard configuration, aeroelastically tailored composite wing skins, three-surface pitch control configuration, and a highly unstable airframe. The expansion of the aircraft 1-g and maneuver flight envelopes was recently completed over a two-year period in 84 flights. Overall flight results confirmed the viability of the aircraft design, and good agreement with preflight predictions was obtained. The individual technologies' operational workability and performance were confirmed. This paper deals with the flight test results and the preliminary evaluation of the X-29A design and technologies. A summary of the primary technical findings in structural static loads, structural dynamic characteristics, flight control system characteristics, aerodynamic stability and control, and aerodynamic performance is presented.

Hicks, John W.↗

NASA NTRS1987

The nature of comets

The large-scale structure, dynamics, and chemical composition of comets are examined on the basis of preliminary ground-based and space-probe data from the Halley return of 1986. Diagrams, graphs, photographs, and false-color images are provided, and data on Comet Giacobini-Zinner are included for comparison. Features noted include solar-wind interaction with magnetic-field draping around the head region, dramatic disconnection events, an irregularly shaped monolithic primarily water-ice nucleus and a dark surface, and dust with chemical composition like that of (H, C, N, O)-enriched carbonaceous chondrites.

Brandt, J. C.↗

NASA NTRS1987

An auroral model for the NCAR thermospheric general circulation model (TGCM)

A model of high latitude auroral processes has been developed for use in the NCAR TGCM. The ion drift pattern associated with magnetospheric convection is specified by the empirical model of Heelis et al. (1982) considering offset geographic and geomagnetic poles. An analytic prescription of particle precipitation in the auroral oval is developed that enables rapid numerical evaluation of auroral ionization rates and global aurora power input. An analytic expression has been derived for the total ionization rate and an ion chemical scheme is used to calculate the electron density enhancements and ion density distributions caused by auroral particle precipitation. The results of TGCM runs with and without auroral particle precipitation show the importance of auroral ionization in determining the dynamic structure of the winter hemisphere lower thermosphere.

Roble, R. G.↗

NASA NTRS1987

Past and future of radio occultation studies of planetary atmospheres

Measurements of radio waves that have propagated through planetary atmospheres have provided exploratory results on atmospheric constituents, structure, dynamics, and ionization for Venus, Mars, Titan, Jupiter, Saturn, and Uranus. Highlights of past results are reviewed in order to define and illustrate the potential of occultation and related radio studies in future planetary missions.

Eshleman, Von R.↗

NASA NTRS1988

Some experiences with the Eigensystem Realization Algorithm

The Eigensystem Realization Algorithm (ERA) is a multiinput/multioutput time-domain algorithm for minimum-order system realization and modal parameter identification. It has been used for structural dynamics data analysis at the Langley Research Center for several years. Some of the practical experiences encountered in these projects are discussed in this paper. Three examples are used: the Galileo spacecraft, the Solar Array Flight Experiment, and a laboratory space-truss model. Several techniques for assessing identification accuracy are illustrated.

Pappa, Richard S.↗

NASA NTRS1987

Modal survey tests for high-frequency vibration analysis of the Space Shuttle Main Engine

Variations in the modal characteristics of different Space Shuttle Main Engines (SSMEs) are presented herein to study their structural dynamics vibrations, especially under fluid/structure interaction. The results of extensive modal survey tests and analysis relative to significant features in the modal characteristics of different powerheads and components are discussed.

Panossian, H. V.↗