Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Effects of Ti substitution on structural and magnetic properties of Zn–Mn ferrospinels

Highlights: ► Novel system ZnMn{sub 1−x}Ti{sub x}FeO{sub 4} synthesized by sol–gel route. ► Nanocrystalline materials. ► Magnetic materials. - Abstract: Nanocrystalline ZnMn{sub 1−x}Ti{sub x}FeO{sub 4} (1.0 ≥ x ≥ 0) ferrites were prepared by sol–gel route. Formation of single phase cubic spinel structure for all the compositions was confirmed from their X-ray diffraction patterns. The lattice parameter shows an increasing trend with the increase in Ti content. These ferrite samples existed as crystalline nanoparticles of about 30–40 nm size as observed from transmission electron microscopy (TEM) technique. EDAX analysis indicated that the concentration of different elements in different compositions is in close agreement with the starting concentrations. Infrared spectra showed two main absorption bands in the range 400–800 cm{sup −1} arising due to tetrahedral (A) and octahedral (B) stretching vibrations. The magnetic studies indicated that, the ferrimagnetic behavior increases with titanium substitution.

36 MATERIALS SCIENCE↗

Synthesis of NiCuZn-ferrite powders by means of mechanochemical treatment

Graphical abstract: The peak intensity for the product calcined at 500 °C is relatively weak, but it gradually increases with increasing the temperature. This implies that the temperature up to 700 °C leads to well crystallization of the spinel type of Ni{sub 0.45}Cu{sub 0.05}Zn{sub 0.5}Fe{sub 2}O{sub 4} phase. - Highlights: • NiCuZn-ferrite powders were obtained at a low temperature by mechanochemical activation. • The effects of the mechanical and thermal treatments on the mixtures were analyzed. • The mechanochemical method benefited achieving the lower M{sub s} and μ{sub i}. - Abstract: NiCuZn-ferrite powders were synthesized by mechanochemical treatments using NiCO{sub 3}⋅2Ni(OH){sub 2}⋅4H{sub 2}O, CuO, ZnO and Fe{sub 2}O{sub 3} as raw materials. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and vibrating sample magnetometer (VSM) were employed to evaluate the morphologies and structures of samples. The results indicated that the mechanochemical treatment produced several structural and chemical effects on reactants of the powder mixtures, and single phase Ni{sub 0.45}Cu{sub 0.05}Zn{sub 0.5}Fe{sub 2}O{sub 4} could be obtained after annealed at 700 °C for 2 h. In comparison with the traditional firing method, the mechanochemical method benefited achieving the lower M{sub s} and μ{sub i}, which indicated that the sample had better magnetic properties.

36 MATERIALS SCIENCE↗

Investigation of nanocrystalline zinc chromite obtained by two soft chemical routes

Graphical abstract: - Highlights: • Two soft chemical routes to synthesize zinc chromites are described. • Glycine is used as chelating agent (precursor method) and fuel (solution combustion method). • The synthesized chromites have crystallite size in the range of 18–27 nm. • An antiferromagnetic (AFM) transition is observed at about T{sub N} ∼ 18 K. - Abstract: Zinc chromite (ZnCr{sub 2}O{sub 4}) nanocrystalline powders were obtained by two different chemical routes: the precursor method and the solution combustion method involving glycine-nitrates. The complex compound precursors, [ZnCr{sub 2}(NH{sub 2}CH{sub 2}COO){sub 8}]·9H{sub 2}O and [ZnCr{sub 2}(NH{sub 2}CH{sub 2}COOH){sub 4.5}]·(NO{sub 3}){sub 8}·6H{sub 2}O, were characterized by chemical analysis, infrared spectroscopy (IR), ultraviolet–visible spectroscopy (UV–vis) and thermal analysis. The structure, morphology, surface chemistry and magnetic properties of ZnCr{sub 2}O{sub 4} powders were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), infrared and Raman spectroscopy (RS), ultraviolet–visible spectroscopy (UV–vis) and magnetic measurements. X-ray diffraction patterns indicated the chromite spinel phase with good crystallinity and an average crystallite size of approximately 18–27 nm. The band gap values ranged between 3.31 and 3.33 eV. The magnetic measurements indicated an antiferromagnetic transition at T{sub N} ∼ 17.5/18 K.

36 MATERIALS SCIENCE↗

Structural and dielectric properties of yttrium substituted nickel ferrites

Graphical abstract: - Highlights: • Dense NiFe{sub 2−x}Y{sub x}O{sub 4} ceramics (with 0 ≤ x ≤ 0.3) were prepared. • Pure spinels were obtained for x ≤ 0.07 while for x ≥ 0.15 samples had secondary phases. • With addition of yttrium, ac conductivity slightly increased. • We suggest several effects that can explain the observed changes in ac conduction. • With addition of yttrium, dielectric constant increased while the tg δ decreased. - Abstract: The influence of Y{sup 3+} ions on structural and dielectric properties of nickel ferrites (NiFe{sub 2−x}Y{sub x}O{sub 4}, where 0 ≤ x ≤ 0.3) has been studied. The as-synthesized samples, prepared by the co-precipitation method, were analyzed by XRD and FTIR which suggested that Y{sup 3+} ions were incorporated into the crystal lattice for all the samples. However, the XRD analysis of the sintered samples showed that secondary phases appear in the samples with x > 0.07. The samples have densities greater than 90% TD and the SEM images showed that the grain size decreases with the addition of yttrium. Dielectric properties measured from 150 to 25 °C in the frequency range of 100 Hz–1 MHz showed that the addition of yttrium slightly increases the ac conductivity and decreases the tg δ therefore making the materials better suited for the use in microwave devices.

36 MATERIALS SCIENCE↗

Size dependent structural and magnetic properties of Al substituted Co–Mg ferrites synthesized by the sol–gel auto-combustion method

Highlights: • Well-crystalline Co{sub 0.7}Mg{sub 0.3}AlFeO{sub 4} nanoparticles with small grain size were obtained. • The approach is sol–gel auto-combustion technique for obtained nanoparticles. • The prepared Co{sub 0.7}Mg{sub 0.3}AlFeO{sub 4} ferrites are decent soft materials with low coercivity. • The minor decrease in lattice parameter with increase of temperature was observed. - Abstract: Single phased nanocrystalline Co{sub 0.7}Mg{sub 0.3}FeAlO{sub 4} ferrites having low coercivity were synthesized by the sol–gel auto-combustion route. The subsequent powder materials were sintered in a temperature range of 800–1200 °C for 2 h. The effects of sintering temperatures on the structure, morphology and magnetic properties of the prepared soft magnetic material were studied. X-ray diffractometer (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and magnetic property measurement system (MPMS) were used to characterize the samples. X-ray diffraction analysis confirmed a single-phase cubic spinel structure and ruled out the presence of impurities like hematite. The higher sintering temperatures have caused in enhanced mark of crystallinity and bigger average grain size of the nanocrystals. A slight decrease in lattice parameters was noticed with a rise of grain size. Magnetic measurements revealed that grain size increase led to a decrease in the coercivity and, in difference, an increase in the saturation magnetization.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of superparamagnetic Fe{sub 3}O{sub 4} nanoparticles with ionic liquids as stabilizer

Highlights: • Superparamagnetic Fe{sub 3}O{sub 4} nanoparticles with good dispersity have been synthesized via hydrothermal method. • Ionic liquid [C{sub 16}mim]Cl acts as stabilizer for the Fe{sub 3}O{sub 4} nanoparticles. • Fe{sub 3}O{sub 4} nanoparticles have a saturation magnetization of 67.69 emu/g at 300 K. - Abstract: Superparamagnetic Fe{sub 3}O{sub 4} nanoparticles have been successfully synthesized under hydrothermal condition with the assistant of ionic liquid 1-hexadecyl-3-methylimidazolium chloride ([C{sub 16}mim]Cl). The structure and morphology of the sample have been investigated by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), transmission electron microscopy (TEM), and high-resolution TEM (HRTEM), and the results indicate that the as-synthesized inverse spinel Fe{sub 3}O{sub 4} nanoparticles have an average diameter of about 10 nm and exhibit relatively good dispersity. More importantly, it is found that [C{sub 16}mim]Cl acts as stabilizer for the Fe{sub 3}O{sub 4} nanoparticles by adsorbing on the particles surfaces to prevent the agglomeration. In addition, the obtained superparamagnetic Fe{sub 3}O{sub 4} nanoparticles have a saturation magnetization of 67.69 emu/g at 300 K.

36 MATERIALS SCIENCE↗

Effect of Ni content on the structural, morphological and magnetic properties of spray deposited Ni–Zn ferrite thin films

Graphical abstract: The Ni{sub x}Zn{sub 1−x}Fe{sub 2}O{sub 4} (where x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0) thin films were prepared by spray pyrolysis technique onto the quartz substrates. The composition x = 0.4 shows the formation of the compact grain structure and highest saturation magnetization of 143 emu/cm{sup 3}. - Highlights: • Synthesis of nanocrystalline Ni{sub x}Zn{sub 1−x}Fe{sub 2}O{sub 4} thin films. • Influence of Ni substitution on physicochemical properties. • Electrical conductivity arises mainly from the grain boundary. • The highest saturation magnetization is 143 emu/cm{sup 3} for x = 0.4. - Abstract: The Ni{sub x}Zn{sub 1−x}Fe{sub 2}O{sub 4} thin films have been prepared using a simple spray pyrolysis technique. The X-ray diffraction studies reveal that, the films are polycrystalline with spinel structure. The lattice parameters vary in the range of 8.35–8.48 Å with composition (x) obeying Vegard’s rule. SEM and AFM studies show that the surface of the films exhibit a smooth, compact and a pin hole free morphology. Raman spectra indicate first order Raman active modes; A{sub 1g} (λ = 334 cm{sup −1}); E{sub g} (λ = 148 cm{sup −1}) and T{sub 2g} (λ = 699) of the Ni{sub x}Zn{sub 1−x}Fe{sub 2}O{sub 4}. The investigation on dielectric constant, dielectric loss tangent and ac conductivity was carried out in the frequency range 20 Hz–1 MHz at room temperature. The linear nature of the AC conductivity shows small polaron type of hopping mechanism. The saturation magnetization increases up to x = 0.4 (143 emu/cm{sup 3}), which decreases for higher x.

36 MATERIALS SCIENCE↗

Structural and magnetic characterization of electro-crystallized magnetite nanoparticles under constant current

Graphical abstract: Structural and magnetic properties of electro-crystallized magnetite nanoparticles under constant current were studied. All samples were characterized using XRD, SEM, VSM, and Mössbauer spectrometry. - Highlights: • The effect of applied current on morphology and properties of Fe{sub 3}O{sub 4} is studied. • The particle size and morphology are controllable by adjusting the current. • The magnetization depends on particle size, type of surfactant and applied current. • The clear correlation between magnetization and the mean particle size is observed. - Abstract: The effect of applied current on the morphology, particle size, structure, and magnetic properties of magnetite nanoparticles prepared by electro-crystallization method was studied. The synthesis was performed in an electrochemical cell containing two iron electrodes and an aqueous solution of sodium sulfate, and either thiourea, sodium butanoate, or β-cyclodextrine as organic stabilizer. All the samples were characterized by XRD, SEM, VSM, and Mössbauer spectroscopy. X-ray diffraction patterns, clearly confirmed that all products have the cubic spinel Fe{sub 3}O{sub 4} crystal structure. Electron microscope images of the samples showed that their mean particle size is in the range 20–80 nm, and depends critically on the applied current and type of the organic additives. Specific magnetization of the samples at room temperature ranges from 60 to 90 A m{sup 2} kg{sup −1}, depending on the growth conditions. Room temperature Mössbauer spectra are typical of nonstoichiometric Fe{sub 3−δ}O{sub 4}, with a small excess of Fe{sup 3+}, 0.06 ≤ δ ≤ 0.17.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The effects of cetyltrimethylammonium bromide surfactant on alumina modified zinc oxides

Highlights: • Synthesis of novel ZnO−Al{sub 2}O{sub 3} oxides in the presence of CTAB surfactant. • Determination of the structural, surface and optical properties. • Nanocrystalline, high-surface area ZnO−Al{sub 2}O{sub 3} oxides. • ZnO-Al{sub 2}O{sub 3} materials of different gap energy. - Abstract: Novel alumina modified zinc oxide materials were prepared by co-precipitation method in the presence of different amounts of cetyltrimethylammonium bromide (CTAB) surfactant. X-ray diffraction, {sup 27}Al magic-angle spinning Nuclear Magnetic Resonance Spectroscopy, and transmission electron microscopy studies evidenced formation of 10–15 nm zinc oxide nanoparticles in the presence of the small amounts of surfactant. Amorphous alumina and zinc aluminate phases of different coordination environment of Al sites were identified. An increase of surfactant concentration led to the elongation of nanoparticles and changes of the nature of hydroxyl groups. Precipitation in the high CTAB concentration conditions facilitated formation of mesoporous materials of high specific surface area. The materials were composed of very small (2–3 nm) zinc aluminate spinel nanoparticles. High concentration of CTAB induced widening of band gap energy.

36 MATERIALS SCIENCE↗

Dielectric and magnetic properties of CoFe2O4 prepared by sol-gel auto-combustion method

Cobalt ferrite powders were successfully synthesized by sol-gel auto-combustion method. Influence of sintering temperature on structural, magnetic and dielectric properties was studied. All the obtained samples are spinel ferrite with a cubic symmetry. As the sintering temperature increased from 900 °C to 1300 °C, the average grain size increased from 0.26 μm to 0.83 μm. The dielectric constant and loss tangent measurement showed strong temperature dependence at all frequencies. The maximum magnetization increased while the coercivity and remanent magnetization decreased with the increasing sintering temperature. The non-saturation at high fields may be related to the surface effects in CoFe{sub 2}O{sub 4} samples. When sintered at 1300 °C, the sample showed a maximum magnetization value of ∼87.32 emu/g at room temperature. The highest value of coercivity of all the samples was 1368.33 Oe for the sample sintered at 900 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electric, thermoelectric and magnetic characterization of γ-Fe2O3 and Co3O4 nanoparticles synthesized by facile thermal decomposition of metal-Schiff base complexes

Highlights: • Fe and Co oxide NPs were prepared from Schiff base complexes as new precursors. • The electrical conduction in Fe and Co oxide NPs is governed by hopping processes. • Co{sub 3}O{sub 4} NPs show weak ferromagnetic ordering at room temperature. • γ-Fe{sub 2}O{sub 3} NPs have superparamagnetic behavior. - Abstract: Using novel compounds for synthesis of metal oxide nanomaterials can tune their physical properties due to the associated variation in the shape, size and crystallinity. In this work, γ-Fe{sub 2}O{sub 3} and Co{sub 3}O{sub 4} nanoparticles were successfully prepared by a facile thermal decomposition route, employing [Fe(C{sub 32}H{sub 22}N{sub 4}O{sub 2})]·2H{sub 2}O and [Co(C{sub 16}H{sub 11}N{sub 3}O{sub 4})].(1/2)H{sub 2}O complexes, respectively as new precursors. The x-ray diffraction and high resolution transmission electron microscopy investigation confirmed that the materials consist of highly pure spinel γ-Fe{sub 2}O{sub 3} and Co{sub 3}O{sub 4} nanoparticles with average size of ∼ 9 and 30 nm, respectively. The electrical conduction is governed by the hopping mechanism. The thermoelectric power measurements confirmed that Co{sub 3}O{sub 4} nanoparticles are non-degenerate semiconductor with Fermi energy ∼1.21 eV while γ-Fe{sub 2}O{sub 3} nanoparticles showed a degenerate to non-degenerate transition. The Co{sub 3}O{sub 4} nanoparticles showed a weak ferromagnetic ordering that could be attributed to uncompensated surface spins due to finite-size effects. But γ- Fe{sub 2}O{sub 3} NPs show superparamagnetic behavior at room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Role of ferroelectric/ferromagnetic layers on the ferroelectric properties of magnetoelectric composite films derived by chemical solution deposition

Highlights: • Multiferroic composite films with different components were prepared. • Individual layer effect on the properties of composite films was studied. • BTO-CFO film shows bigger ferroelectric polarization than BTO-BFO film. • Leakage current curves show BTO-CFO film has the smallest leakage current. • Leakage current is dominated by the space-charges-limited mechanisms. - Abstract: Composite thin films with BiFeO{sub 3} (BFO), CoFeO{sub 4} (CFO) and/or BaTiO{sub 3} (BTO) layers as the components are fabricated via CSD method. XRD and Raman patterns show all the composite films can be indexed to perovskite and spinel structures. Except the interfaces between BTO and CFO layers, the other two-phase interfaces can be clearly observed. Interestingly, the BTO-CFO film has bigger polarization than BTO-BFO, especially the thickness of CFO layer is smaller than the BFO layer, implying the ferromagnetic layer has a significant impact on the ferroelectric properties of the composite films, which is too thin to be fully polarized. The variation of leakage currents show BTO-CFO film has the smallest value, corroborating the results of ferroelectric measurements. The leakage current is dominated by the space-charges-limited mechanisms according to the fitting results, and the oxygen vacancies in the BFO layers play an important role for the variations of E{sub SCL} and E{sub TFL} voltages.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reinforcing cycling stability and rate capability of LiNi0.5Mn1.5O4 cathode by dual-modification of coating and doping of a fast-ion conductor

Highlights: • Li{sub 2}SiO{sub 3}-modified LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} with well-defined octahedral morphology have been controllably obtained. • The combination of the modification of fast ions conductor and solid state method will be an optional method. • The cyclic performance and rate capability of LiNi{sub 0.5}Mn{sub 1.5}O{sub 4}-based materials have been significantly improved. - Abstract: A simple solid state method was utilized to synthesize excellent spinel Li{sub 2}SiO{sub 3}-modified LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} cathodes. Dual-modification of coating and doping of fast-ion conductor Li{sub 2}SiO{sub 3} leads to stable crystal structure and additional three-dimensional (3-D) channels for Li{sup +}-ion diffusion, and protects the electrode surface from electrolyte attack. The Li{sub 2}SiO{sub 3}-modified material possesses coexistence of ordered P4{sub 3}32 and disordered Fd-3m phases. As a result of improved structure, morphology and conductivity, the Li{sub 2}SiO{sub 3}-modified LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} shows more superior cyclic performance, rate capability and high temperature stability than the pristine: capacity retention of 95.17% at 0.1 C after 100 cycles vs. that of 79.23%; rate capability of 130–89.1 mAh g{sup −1} at 0.1–10 C vs. that of 120–57.6 mAh g{sup −1}; and high temperature capacity retention of 99.42% at 0.1 C vs. that of 79.59%. Our study provides a facile approach to stabilize crystal structure, optimize morphology and conductivity, and thus enhance electrochemical performance of LiNi{sub 0.5}Mn{sub 1.5}O{sub 4}-based materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, magnetic and impedance spectroscopy analysis of (0.7)CoFe2O4+(0.3)BaTiO3 magnetoelectric composite

Highlights: • Successfully synthesized (0.7)CoFe{sub 2}O{sub 4}+(0.3)BaTiO{sub 3} composite by ball-milling method. • Structural properties confirmed the presence of both constituent phases. • Dielectric properties showed high value of permittivity and diminished dielectric loss at higher frequency. • Electric response of the constituent phases explained the observed relaxation processes. • Small polaron hopping mechanism governed the conduction mechanism. - Abstract: Magnetoelectric composite of particular composition (0.7)CoFe{sub 2}O{sub 4}+(0.3)BaTiO{sub 3} was synthesized by ball-milling method. X-ray diffraction pattern confirmed the presence of cubic spinel phase for CoFe{sub 2}O{sub 4} and the coexistence of tetragonal phase along with a small fraction of hexagonal phase for BaTiO{sub 3} in the prepared composite. The dielectric permittivity increased with increasing temperature (298–373 K); however, it showed relatively high magnitude of permittivity (∼1100) and diminished dielectric loss (∼0.045) at higher frequency. Complex impedance and modulus plots exhibited responses of different electro-active regions which are explained on the basis of coexistence of resistive and comparatively conductive phases in the prepared composite. Small polaronic hopping model was employed to explain the n-type carrier’s mobility as a possible conduction mechanism; whereas the activation energies calculated from the conduction and relaxation processes were found to be comparable. These results indicate that electric/dielectric properties and relaxation phenomenon are associated to the same origin.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

RGO/BaFe12O19/Fe3O4 nanocomposite as microwave absorbent with lamellar structures and improved polarization interfaces

Highlights: • RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} nanocomposite are prepared via a two-step solvothermal method. • The maximum reflection loss can reach −46.04 dB, and the effective absorption bandwidth under −10 dB is 5.68 GHz. • Interfacial polarization as one of the mechanism for the enhanced absorption properties was detailedly analyzed. - Abstract: In this paper, we designed and prepared a composite of BaFe{sub 12}O{sub 19} (BFO) flakes, two-dimensional graphene and Fe{sub 3}O{sub 4} nanoparticles using a two-step solvothermal method. The combination of BFO flakes and two-dimensional graphene could effectively enhance the heterointerface and is believed to be favorable to enhance the interface polarization. The introduction of inverse spinel Fe{sub 3}O{sub 4} as the third phase could increase the saturated magnetization. The phase structure, morphology, magnetic properties and electromagnetic wave absorption performance of the as-prepared samples were characterized. Due to the enhanced interfacial polarization between the BaFe{sub 12}O{sub 19} flakes and graphene, the composite of RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} exhibits excellent microwave absorption properties. The maximum reflection loss can reach -46.04 dB at 15.6 GHz with a thickness of 1.8 mm, and the effective absorption bandwidth reaches 5.68 GHz (from 11.60 GHz to 17.28 GHz). It is believed that the RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} composites can find potential application in the field of microwave absorption due to their excellent absorption properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Towards increased waste loading in high level waste glasses: Developing a better understanding of crystallization behavior

A number of waste components in US defense high level radioactive wastes (HLW) have proven challenging for current Joule heated ceramic melter (JCHM) operations and have limited the ability to increase waste loadings beyond already realized levels. Many of these ''troublesome'' waste species cause crystallization in the glass melt that can negatively impact product quality or have a deleterious effect on melter processing. Thus, recent efforts at US Department of Energy laboratories have focused on understanding crystallization behavior within HLW glass melts and investigating approaches to mitigate the impacts of crystallization so that increases in waste loading can be realized. Advanced glass formulations have been developed to highlight the unique benefits of next-generation melter technologies such as the Cold Crucible Induction Melter (CCIM). Crystal-tolerant HLW glasses have been investigated to allow sparingly soluble components such as chromium to crystallize in the melter but pass out of the melter before accumulating. The Hanford site AZ-101 tank waste composition represents a waste group that is waste loading limited primarily due to high concentrations of Fe 2 O 3 (with higher Al 2 O 3 ). Systematic glass formulation development utilizing slightly higher process temperatures and higher tolerance to spinel crystals demonstrated that an increase in waste loading of more than 20% could be achieved for this waste composition, and by extension higher loadings for wastes in the same group.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Iron-oxide Aerogel and Xerogel Catalyst Formulations: Characterization by 57Fe Mössbauer and XAFS Spectroscopies

Iron in various iron-oxide aerogel and xerogel catalyst formulations ({ge}85% Fe{sub 2}O{sub 3}; {le}10% K, Co, Cu, or Pd) developed for possible use in Fischer-Tropsch synthesis (FTS) or the water-gas-shift (WGS) reaction has been examined by {sup 57}Fe Moessbauer spectroscopy. The seventeen samples consisted of both as-prepared and calcined aerogels and xerogels and their products after use as catalysts for FTS or the WGS reaction. Complementary XAFS spectra were obtained on the occurrence of the secondary elements in some of the same materials. A broad, slightly asymmetric, two-peak Moessbauer spectrum was obtained from the different as-prepared and calcined catalyst formulations in the majority of cases. Such spectra could only be satisfactorily fit with three quadrupole doublet components, but no systematic trends in the isomer shift and quadrupole splitting parameters and area ratios of the individual components could be discerned that reflected variations in the composition or preparation of the aerogel or xerogel materials. However, significant reductions were noted in the Moessbauer effective thickness (recoilless absorption effect per unit mass of iron) parameter, {chi}{sub eff}/g, determined at room temperature, for aerogels and xerogels compared to bulk iron oxides, reflecting the openness and lack of rigidity of the aerogel and xerogel structures. Moessbauer measurements for two aerogels over the range from 15 to 292 K confirmed the greatly diminished nature of this parameter at room temperature. Major increases in the effective thickness parameter were observed when the open structure of the aerogel or xerogel collapsed during calcination resulting in the formation of iron oxides (hematite, spinel ferrite). Similar structural changes were indicated by increases in this parameter after use of iron-oxide aerogels as catalysts for FTS or the WGS reaction, during which the iron-oxide aerogel was converted to a mixture of nonstoichiometric magnetite and the Haegg carbide, {chi}-Fe{sub 5}C{sub 2}, or nonstoichiometric magnetite, respectively.

01 COAL, LIGNITE, AND PEAT↗