Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solar cell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Chapter 1: Halide Organic Photovoltaics for Energy: Hybrid Perovskites for Solar Cells

The following sections are included: Fundamentals of Photovoltaics, What Limits PV Device Efficiencies?, Traditional Photovoltaics, Perovskite Halide-Based Hybrid Semiconductors for Photovoltaics: Novel Materials in a League of Their Own, Solution Processability, Tunability, Perovskite Solar Cell Architectures, Pairing Perovskite Absorbers, Reduction/Oxidation and Electrochemical Reactivity Considerations for High-Performance Halide Perovskite Solar Cells, Metal Electrode Corrosion, Proton-Mediated Reduction of Ni3+ at NiOx Interfaces, Electrochemistry in Solid-State Perovskite Devices, Overview of Stability Considerations for High Performance Perovskite Solar Cells, Moisture-Induced Degradation, Oxygen-Mediated Degradation, Illumination-Dependent Degradation, Bias-Dependent Degradation, Stability Considerations for Charge Selective Contacts, Electrode-Induced Degradation Modes, Conclusion, and References.

absorbers↗
DOE OSTI2021

High-specific-power flexible transition metal dichalcogenide solar cells

Abstract Semiconducting transition metal dichalcogenides (TMDs) are promising for flexible high-specific-power photovoltaics due to their ultrahigh optical absorption coefficients, desirable band gaps and self-passivated surfaces. However, challenges such as Fermi-level pinning at the metal contact–TMD interface and the inapplicability of traditional doping schemes have prevented most TMD solar cells from exceeding 2% power conversion efficiency (PCE). In addition, fabrication on flexible substrates tends to contaminate or damage TMD interfaces, further reducing performance. Here, we address these fundamental issues by employing: (1) transparent graphene contacts to mitigate Fermi-level pinning, (2) MoO x capping for doping, passivation and anti-reflection, and (3) a clean, non-damaging direct transfer method to realize devices on lightweight flexible polyimide substrates. These lead to record PCE of 5.1% and record specific power of 4.4 W g −1 for flexible TMD (WSe 2 ) solar cells, the latter on par with prevailing thin-film solar technologies cadmium telluride, copper indium gallium selenide, amorphous silicon and III-Vs. We further project that TMD solar cells could achieve specific power up to 46 W g −1 , creating unprecedented opportunities in a broad range of industries from aerospace to wearable and implantable electronics.

42 ENGINEERING↗
NASA NTRS1994

High-efficiency, deep-junction, epitaxial InP solar cells on (100) and (111)B InP substrates

We report on the development and performance of deep-junction (approximately 0.25 micron), graded-emitter-doped, n(sup +)-p InP solar cells grown by metallorganic chemical vapor deposition (MOCVD). A novel, diffusion-transport process for obtaining lightly-doped p-type base regions of the solar cell is described. The I-V data and external quantum-efficiency response of these cells are presented. The best active-area AMO efficiency for these deep-junction cells on (100)-oriented InP substrates is 16.8 percent, with a J(sub SC) of 31.8 mA/sq cm, a V(sub OC) of 0.843 V, and a fill-factor of 0.85. By comparison, the best cell efficiency on the (111)B-oriented InP substrates was 15.0 percent. These efficiency values for deep-junction cells are encouraging and compare favorably with performance of thin-emitter (0.03 micron) epitaxial cells as well as that of deep-emitter diffused cells. The cell performance and breakdown voltage characteristics of a batch of 20 cells on each of the orientations are presented, indicating the superior breakdown voltage properties and other characteristics of InP cells on the (111)B orientation. Spectral response, dark I-V data, and photoluminescence (PL) measurements on the InP cells are presented with an analysis on the variation in J(sub SC) and V(sub OC) of the cells. It is observed, under open-circuit conditions, that lower-V(sub OC) cells exhibit higher band-edge PL intensity for both the (100) and (111)B orientations. This anomalous behavior suggests that radiative recombination in the heavily-doped n(sup +)-InP emitter may be detrimental to achieving higher V(sub OC) in n(sup +)-p InP solar cells.

Venkatasubramanian, R.↗
NASA NTRS1981

Investigation of solar cells fabricated on low-cost silicon sheet materials using 1 MeV electron irradiation

The use of high energy electron irradiation is investigated as a controlled means to study in more detail the junction depletion layer processes of solar cells made on various low-cost silicon sheet materials. Results show that solar cells made on Czochralski grown silicon exhibit enhancement of spectral response in the shorter wavelength region when irradiated with high energy electrons. The base region damage can be reduced by subsequent annealing at 450 C which restores the degraded longer wavelength response, although the shorter wavelength enhancement persists. The second diode component of the cell dark forward bias current is also reduced by electron irradiation, while thermal annealing at 450 C without electron irradiation can also produce these same effects. Electron irradiation produces small changes in the shorter wavelength spectral responses and junction improvements in solar cells made on WEB, EFG, and HEM silicon. It is concluded that these beneficial effects on cell characteristics are due to the reduction of oxygen associated deep level recombination centers in the N(+) diffused layer and in the junction.

Kachare, A. H.↗
DOE OSTI2021

Pressure and thermal annealing effects on the photoconversion efficiency of polymer solar cells

This paper presents the results of experimental and theoretical studies of the effects of pressure and thermal annealing on the photo-conversion efficiencies (PCEs) of polymer solar cells with active layers that consist of a mixture of poly(3-hexylthiophene-2,5-diyl) and fullerene derivative (6,6)-phenyl-C 61 -butyric acid methyl ester. The PCEs of the solar cells increased from ~2.3% (for the unannealed devices) to ~3.7% for devices annealed at ~150 °C. A further increase in thermal annealing temperatures (beyond 150 °C) resulted in lower PCEs. Further improvements in the PCEs (from ~3.7% to ~5.4%) were observed with pressure application between 0 and 8 MPa. However, a decrease in PCEs was observed for pressure application beyond 8 MPa. The improved performance associated with thermal annealing is attributed to changes in the active layer microstructure and texture, which also enhance the optical absorption, mobility, and lifetime of the optically excited charge carriers. The beneficial effects of applied pressure are attributed to the decreased interfacial surface contacts that are associated with pressure application. The implications of the results are then discussed for the design and fabrication of organic solar cells with improved PCEs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A naphthalene diimide side-chain polymer as an electron-extraction layer for stable perovskite solar cells

Poly(N-(5-(5-norbornene-2-carbonyl)oxy)pentyl)-N'-n-hexyl-naphthalene-1,8:4,5-bis(dicarboximide) has been synthesized by esterification of (N-(5-hydroxypentyl)-N'-n-hexyl-naphthalene-1,8:4,5-bis(dicarboximide)) with exo-5-norbornene-2-carboxylic acid, and has been polymerized using the first-generation Grubbs initiator. This side-chain polymer exhibits good transparency throughout the visible (absorption onset at ca. 400 nm), good solubility in common low- and medium-polarity organic solvents, good resistance to dimethylformamide, and appropriate electron affinity for use as an electron-extraction layer in lead-halide perovskite solar cells. The performance of this polymer in n-i-p perovskite solar cells was compared to that of several small-molecule naphthalene-1,8:4,5-bis(dicarboximide) derivatives and of SnO 2 . Solar cells using the polymer exhibited open-circuit voltages of up to 1.02 V, short-circuit currents of over 21 mA cm –2 , and power conversion efficiencies (PCE) reaching 14% which stabilize at 13.8% upon 90 s of illumination. Meanwhile control SnO 2 devices exhibited a PCE of ca. 16%, and small-molecule devices gave PCE values of less than 10%. Here, the devices employing the polymer exhibited improved long-term stability relative to the SnO 2 control devices under continuous illumination.

36 MATERIALS SCIENCE↗
NASA NTRS1980

Design requirements for high-efficiency high concentration ratio space solar cells

A miniaturized Cassegrainian concentrator system concept was developed for low cost, multikilowatt space solar arrays. The system imposes some requirements on solar cells which are new and different from those imposed for conventional applications. The solar cells require a circular active area of approximately 4 mm in diameter. High reliability contacts are required on both front and back surfaces. The back area must be metallurgically bonded to a heat sink. The cell should be designed to achieve the highest practical efficiency at 100 AMO suns and at 80 C. The cell design must minimize losses due to nonuniform illumination intensity and nonnormal light incidence. The primary radiation concern is the omnidirectional proton environment.

Rauschenbach, H.↗
NASA NTRS1993

TAB interconnects for space concentrator solar cell arrays

The Boeing Company has evaluated the use of Tape Automated Bonding (TAB) and Surface Mount Technology (SMT) for a highly reliable, low cost interconnect for concentrator solar cell arrays. TAB and SMT are currently used in the electronics industry for chip interconnects and printed circuit board assembly. TAB tape consists of sixty-four 3-mil/1-oz tin-plated copper leads on 8-mil centers. The leads are thermocompression gang bonded to GaAs concentrator solar cell with silver contacts. This bond, known as an Inner Lead Bond (ILB), allows for pretesting and sorting capability via nondestruct wire bond pull and flash testing. Destructive wire pull tests resulted in preferred mid-span failures. Improvements in fill factor were attributed to decreased contact resistance on TAB bonded cells. Preliminary thermal cycling and aging tests were shown excellent bond strength and metallurgical results. Auger scans of bond sites reveals an Ag-Cu-Tin composition. Improper bonds are identified through flash testing as a performance degradation. On going testing of cells are underway at Lewis Research Center. SMT techniques are utilized to excise and form TAB leads post ILB. The formed leads' shape isolates thermal mismatches between the cells and the flex circuit they are mounted on. TABed cells are picked and placed with a gantry x-y-z positioning system with pattern recognition. Adhesives are selected to avoid thermal expansion mismatch and promote thermal transfer to the flex circuit. TAB outer lead bonds are parallel gap welded (PGW) to the flex circuit to finish the concentrator solar cell subassembly.

Avery, J.↗
DOE OSTI2021

Trap-Assisted Dopant Compensation Prevents Shunting in Poly-Si Passivating Interdigitated Back Contact Silicon Solar Cells

Using a trap-assisted compensation model, we explain why polycrystalline Si (poly-Si) passivating contacts are able to achieve low leakage current between the doped fingers of interdigitated back contact (IBC) monocrystalline Si solar cells despite mixing of boron and phosphorus dopants in the isolation region. The fill factor of IBC solar cells is strongly affected by the electrical isolation region between n- and p-type fingers, as this region is critical in minimizing shunting losses. During fabrication of monocrystalline Si solar cells with poly-Si passivating contacts, the intrinsic poly-Si isolation region inevitably gets contaminated with both p- and n-type dopants. Using dopant profiles measured with time-of-flight secondary ion mass spectrometry and scanning probe measurements of the isolation region, we demonstrate that despite the dopant spreading during cell processing, a well-compensated region between the doped fingers exists that prevents shunting. The trap-assisted dopant compensation mechanism significantly widens the compensated region to tens of microns, where the residual dopant densities are below the trap density. This enables a high-resistivity region, resulting in low shunt current. Using one-dimensional (1-D) finite element diode simulations, we identify the design parameters and experimental conditions under which a sufficiently resistive region can form. Furthermore, our measurements of 2-D local resistivity and work function maps across the isolation region using scanning spreading resistance microscopy and Kelvin probe force microscopy demonstrate the existence of a highly resistive, wide compensated region and confirm our proposed compensation mechanism. For our structures, this region is ~25 µm in width within a ~150 µm wide finger isolation region with nearly 3 orders of magnitude higher resistivity than the regions dominated by a single type of dopant.

14 SOLAR ENERGY↗
NASA NTRS1986

Theoretical and experimental considerations for high silicon solar cell performance

This paper reviews ongoing research aimed at the attainment of highly efficient silicon solar cells. The importance of low-recombination highly-doped n(+) and p(+) regions and the manner in which such regions are fabricated are discussed. Theoretical light-trapping considerations are combined with experimental reflectance data to show that high quantum efficiency may be obtained from thin (100-micron) cells. The principal finding of this work is that thin solar cells with conversion efficiencies of over 20 percent may be fabricated if recombination at the front and back metal/silicon interfaces is reduced. Large-area cells (53 sq cm) with an efficiency of 18 percent are reported.

Spitzer, M. B.↗
DOE OSTI2025

Bias‐Dependent Quantum Efficiency Reveals Recombination Pathways in Thin Film Solar Cells

Identifying where recombination predominantly occurs—whether at the front interface, back interface, or throughout the bulk—is crucial for optimizing CdSeTe solar cells and many other photovoltaic device architectures. Here, a simple and effective diagnostic is demonstrated: measuring external quantum efficiency (QE) under varying forward biases. The drift–diffusion simulations reveal that each recombination pathway leaves a distinct bias-induced signature in the normalized QE: a progressive drop at long wavelengths for back-limited devices, a short-wavelength decline for front-limited devices, and a relatively uniform decrease across all wavelengths for bulk-limited devices. These predictions are validated with experiments on As-doped and Cu-doped CdSeTe devices, with and without passivation layers or different front buffers. In each case, the observed bias-dependent QE spectral changes align with the simulated recombination map. Because this method uses standard QE instrumentation, it offers a broadly accessible and cost-efficient means to diagnose recombination pathways—extending beyond CdSeTe to other thin-film and emerging solar cell technologies. By pinpointing recombination bottlenecks, researchers and manufacturers can strategically refine doping profiles, passivation schemes, and interface designs to further improve device performance.

CdTe↗
NASA NTRS1977

A methodology for experimentally based determination of gap shrinkage and effective lifetimes in the emitter and base of p-n junction solar cells and other p-n junction devices

An experimentally based methodology that determines the effective gap shrinkage and lifetime in the emitter of a p-n junction solar cell is described which provides an experimental means for assessing the importance of gap shrinkage relative to that of large recombination rates in the highly doped emitter. The base lifetime is also determined. The methodology pertains to a solar cell after the junction is formed, so that each material parameter determined includes the effects of the processing used in junction fabrication. The methodology consists of strategy and procedures for designing experiments and interpreting data consistently with the physical mechanisms governing device behavior. This careful linking to the device physics uncover the material parameters concealed in the data. To illustrate the procedures, they are applied to an n(+)-p solar cell having substrate resistivity of about 0.1 ohm-cm.

Lindholm, F. A.↗
NASA NTRS1977

Effects of defect recombination centers on radiation damage in solar cells

Defect production in silicon is modeled on a computer by solving a large system of rate equations. The model includes the main, known defects that are stable at operating temperatures of solar cells in outer space; most of these defects are secondary and tertiary defects. The preliminary result shows that the presence of defect recombination centers for primary defects (i.e., vacancy and interstitial) can effectively reduce the production rates of those stable defects and, consequentially, improve the lifetime of solar cells operating in radiation environment. The characteristics of the defect recombination center required for better solar cell performance along with prospective candidates are discussed.

Cheng, L. J.↗
DOE OSTI2020

High Performance GaAs Solar Cells Grown at High Growth Rates by Atmospheric-Pressure Dynamic Hydride Vapor Phase Epitaxy

We report GaAs solar cells grown at rates exceeding 300 um/h by atmospheric-pressure dynamic hydride vapor phase epitaxy (D-HVPE). The surface morphology of the GaAs layers grown at those rates is smooth, with root mean square surface roughness of < 1.4 nm. We grew GaAs solar cells at rates from 35 - 309 um/h with negligible degradation in open circuit voltages (VOC), which ranged from 1.04 - 1.07 V. We showed the slight decrease in VOC is due to lack of doping optimization at higher growth rates. Deep level transient spectroscopy measurements showed low point defect densities that increases slightly with growth rate from 35 - 309 um/h. The low point defect concentrations and the high VOCs indicate that high material quality can be maintained at these extremely high growth rates, enabling the deposition of high efficiency cells in mere seconds instead of hours.

14 SOLAR ENERGY↗