Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPECIFICATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Worldwide Physics-Based Lifetime Prediction of c-Si Modules Due to Solder-Bond Failure

Lifetime prediction of the fielded c-Si solar modules due to location-specific weather conditions has been an important topic of photovoltaic research and the economic viability of solar energy. Data analytic techniques such as the performance ratio method, Statistical clear sky model, and Suns-Vmp methods quantify the degradation from measured data of a solar farm, however, the nonlinear time-dependence and correlated degradations make it difficult to use the empirical degradation rates for ultimate lifetime projection. In this article, we propose a complementary physics-based model to predict the solder bond failure caused by mechanical stress associated with the variations of the temperature. Integrating the worldwide weather information from NASA/NSRDB databases, the model predicts the location-specific output-power degradation and the lifetime of a module due to solder bond failure. The model parameters are calibrated against qualification tests involving thermal cycling of specific batches of modules from a specific technology/manufacturer. The results may be summarized as: 1) Modules installed at higher latitudes show a longer lifetime due to reduced damage accumulation. 2) The reduction of temperature fluctuation close to large bodies of water, such as seashores, increases solder bond lifetime significantly. 3) Relatively speaking, modules installed close to the Tropic of Cancer/Capricorn (23.5 degrees North/South) suffer from a higher solder bond damage and have a shorter lifetime, suggesting a conservative design. This model should serve as a building block of a comprehensive reliability framework that can predict the lifetime of a module that experiences simultaneous and correlated degradation mechanisms involving yellowing, corrosion, and potential-induced degradation.

14 SOLAR ENERGY↗
DOE OSTI2024

In-Silico Analysis of High Refractive Index Materials Through Principles of Materials Design

The intent of the paper is to use specific principles of Materials Design that were developed and applied in the electronics industry for enabling understanding and design of improved high refractive index materials. Further, by combining first-principle based ab-initio, semiempirical interatomic potential methods, and machine learning approaches in conjunction with experimental data, we identified specific determinants of high refractive index materials, which can be critically applied for informing materials design and accelerating discovery. Specifically, it was demonstrated that chalcogenides and perovskites as bulk materials can exhibit higher refractive indices with appropriate engineering of specific aspects of the materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Advances in Coring Procedures of Silicon Photovoltaic Modules

We describe advances on procedures used for the coring of silicon photovoltaic modules. These procedures involve coring specific locations, starting from the back of the modules, and removing selected parts of the cell structure, while preserving the front tempered glass. The standard coring procedures had to be modified from case to case due to the different cell structures and measurement requirements. We provide examples of the characterization of the cored samples by scanning electron microscopy and energy-dispersive X-ray spectroscopy. Finally, we describe a simple process to create small openings at specific locations on the back of photovoltaic modules to allow for efficiency-related measurement of individual cells and groups of cells.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2024

Shifting Between Compute and Memory Bounds: A Compression-Enabled Roofline Model

In the evolving landscape of high-performance computing, especially to fight the end of Moore’s Law and Dennard’s Scaling, the ability to shift between compute-bound and memory-bound states is critical for enhancing adaptability and flexibility to diverse system and domain-specific architectures. Such capability is vital for optimizing performance across distinguished hardware configurations, such as accelerators, memory hierarchies, and cache systems. Despite that ad hoc optimization techniques, such as compressed/approximate computation, have been enabled for compute-/data-intensive computing for improved performance in distinct hardware settings, there lacks an understanding of 1) the rational behind performance improvement; 2) capability of different optimizations; 3) what optimization to respond to specific computational and memory demands. This work proposes a compression-enabled roofline model to facilitate this adaptability with data compression techniques to balance and transform between computational and memory demands. This model enables applications to adjust in response to the specific strengths and limitations of the underlying hardware and system to optimize resource utilization. The effectiveness of this approach is demonstrated with matrix multiplication kernels on different input sizes, with turning on/off various compression techniques, including 1) low-precision floating point; 2) sparse matrix formulation; and 3) compressed arrays with ZFP. By reducing memory transfer volumes and cache misses and increasing data locality and computational intensity through compression, the specific roofline model can transform between compute and memory bounds to align more efficiently with system capabilities. This advancement not only improves overall performance but also maximizes adaptability in diverse computing environments.

Naraparaju, Ramasoumya [University of Washington]↗
DOE OSTI2020

Heat Treatment Studies of Nb3Sn Wires for Superconducting Planar Undulators

A project aiming to fabricate a full-length 2.8-m long Nb 3Sn superconducting undulator for the storage ring was started last year at the ANL APS. These Nb 3 Sn undulators operate at a maximum magnetic field on the conductor of about 5 T. To address instabilities at this field, two Nb 3 Sn wires with small subelement size were used. Specifically, Restacked Rod Processed wires of 0.6mmin diameter and with 144 and 150 superconducting subelements respectively, over 169 total. The equivalent subelement diameter, DS, of thesewires is35 mu m. At these smallDS values, the critical current density is known to deteriorate, and the Residual Resistivity Ratio is very sensitive to heat treatment. A delicate balance has therefore to be found to obtain parameters within operation specifications. In this paper we showperformance results from different heat treatments.

critical current density↗
DOE OSTI2024

INSURE: An Information Theory iNspired diSentanglement and pURification modEl for Domain Generalization

Domain Generalization (DG) aims to learn a generalizable model on the unseen target domain by only training on the multiple observed source domains. Although a variety of DG methods have focused on extracting domain-invariant features, the domain-specific class-relevant features have attracted attention and been argued to benefit generalization to the unseen target domain. To take into account the class-relevant domain-specific information, in this paper we propose an Information theory iNspired diSentanglement and pURification modEl (INSURE) to explicitly disentangle the latent features to obtain sufficient and compact (necessary) class-relevant feature for generalization to the unseen domain. Specifically, we first propose an information theory inspired loss function to ensure the disentangled class-relevant features contain sufficient class label information and the other disentangled auxiliary feature has sufficient domain information. Additionally, we further propose a paired purification loss function to let the auxiliary feature discard all the class-relevant information and thus the class-relevant feature will contain sufficient and compact (necessary) class-relevant information. Moreover, instead of using multiple encoders, we propose to use a learnable binary mask as our disentangler to make the disentanglement more efficient and make the disentangled features complementary to each other. We conduct extensive experiments on five widely used DG benchmark datasets including PACS, VLCS, OfficeHome, TerraIncognita, and DomainNet. The proposed INSURE achieves state-of-the-art performance. We also empirically show that domain-specific class-relevant features are beneficial for domain generalization. The code is available at https://github.com/yuxi120407/INSURE .

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Cytokinin signaling localized in phloem noncell‐autonomously regulates cambial activity during secondary growth of Populus stems

Summary The regulation of cytokinin on secondary vascular development has been uncovered by modulating cytokinin content. However, it remains unclear how cytokinin enriched in developing secondary phloem regulates cambium activity in poplar. Here, we visualized the gradient distribution of cytokinin with a peak in the secondary phloem of poplar stem via immunohistochemical imaging, and determined the role of phloem‐located cytokinin signaling during wood formation. We generated transgenic poplar harboring cytokinin oxidase/dehydrogenase ( CKX)2 , a gene encoding a cytokinin degrading enzyme, driven by the phloem‐specific CLE41b promoter, indicating that the disruption of the cytokinin gradient pattern restricts the cambial activity. The RNA interference‐based knockdown of the histidine kinase ( HK ) genes encoding cytokinin receptors specifically in secondary phloem significantly compromised the division activity of cambial cells, whereas the phloem‐specific expression of a type‐B response regulator (RR) transcription factor stimulated cambial proliferation, providing evidence for the noncell‐autonomous regulation of local cytokinin signaling on the cambial activity. Moreover, the cambium‐specific knockdown of HK s also led to restricted cambial activity, and the defects were aggravated by the reduced cytokinin accumulation. Our results showed that local cytokinin signaling in secondary phloem regulates cambial activity noncell‐autonomously, and coordinately with its local signaling in cambium.

Fu, Xiaokang↗
DOE OSTI2022

Simple steps to enable reproducibility: culture conditions affecting Chlamydomonas growth and elemental composition

Even subtle modifications in growth conditions elicit acclimation responses affecting the molecular and elemental makeup of organisms, both in the laboratory and in natural habitats. Here, we systematically explored the effect of temperature, pH, nutrient availability, culture density, and access to CO 2 and O 2 in laboratory-grown algal cultures on growth rate, the ionome, and the ability to accumulate Fe. We found algal cells accumulate Fe in alkaline conditions, even more so when excess Fe is present, coinciding with a reduced growth rate. Using a combination of Fe-specific dyes, X-ray fluorescence microscopy, and NanoSIMS, we show that the alkaline-accumulated Fe was intracellularly sequestered into acidocalcisomes, which are localized towards the periphery of the cells. At high photon flux densities, Zn and Ca specifically over-accumulate, while Zn alone accumulates at low temperatures. The impact of aeration was probed by reducing shaking speeds and changing vessel fill levels; the former increased the Cu quota of cultures, the latter resulted in a reduction in P, Ca, and Mn at low fill levels. Trace element quotas were also affected in the stationary phase, where specifically Fe, Cu, and Zn accumulate. Cu accumulation here depends inversely on the Fe concentration of the medium. Individual laboratory strains accumulate Ca, P, and Cu to different levels. All together, we identified a set of specific changes to growth rate, elemental composition, and the capacity to store Fe in response to subtle differences in culturing conditions of Chlamydomonas, affecting experimental reproducibility. Accordingly, we recommend that these variables be recorded and reported as associated metadata.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Intelligent Manufacturing Support: Specialized LLMs for Composite Material Processing and Equipment Operation

Engineering educational curriculum and standards cover many material and manufacturing options. However, engineers and designers are often unfamiliar with certain composite materials or manufacturing techniques. Large language models (LLMs) could potentially bridge the gap. Their capacity to store and retrieve data from large databases provides them with a breadth of knowledge across disciplines. However, their generalized knowledge base can lack targeted, industry-specific knowledge. To this end, we present two LLM-based applications based on the GPT-4 architecture: (1) The Composites Guide: a system that provides expert knowledge on composites material and connects users with research and industry professionals who can provide additional support and (2) The Equipment Assistant: a system that provides guidance for manufacturing tool operation and material characterization. By combining the knowledge of general AI models with industry-specific knowledge, both applications are intended to provide more meaningful information for engineers. In this paper, we discuss the development of the applications and evaluate it through a benchmark and two informal user studies. The benchmark analysis uses the Rouge and Bertscore metrics to evaluate our models’ performance against GPT-4o. The results show that GPT-4o and the proposed models perform similarly or better on the ROUGE and BERTScore metrics. The two user studies supplement this quantitative evaluation by asking experts to provide qualitative and open-ended feedback about our model’s performance on a set of domain-specific questions. The results of both studies highlight a potential for more detailed and specific responses with the Composites Guide and the Equipment Assistant.

Kapoor, Gunnika [Oak Ridge National Laboratory (OR↗
DOE OSTI2022

Characterizing particle-based thermal storage performance using optical methods for use in next generation concentrating solar power plants

Concentrating Solar Power (CSP) generation is an attractive option for low-emission power generation; however, the high costs of thermal storage associated with concentrating solar create a large barrier for their use and adaptation into modern life. Lowering their operation costs, while maintaining high thermal storage and transfer performance is essential. Solid particle-based heat exchange systems can reduce CSP cost but are often less efficient. Efforts to increase their performance have led to use of binary size particle mixes. Presented is an optical-based thermal analysis technique used to measure near-wall thermal conductivity of particle beds essential in determining their heat exchanger efficiency. Modulated Photothermal Radiometry is used to make dynamic temperature measurements, allowing for the extraction of the most relevant thermal properties like thermal conductivity, specific heat, and effusivity. The system uses a modulated laser source causing a damped periodic heat flux, resulting in a frequency and thermal property dependent surface temperature, of which is measured using radiometry. Lock-In techniques are used to extrapolate the amplitude of the signal. Plotting the amplitude against the root angular frequency allows for effusivity measurement by ratio to a known sample. Using specific heat measurements from literature and density measurements, the thermal conductivity of the particle mixes can be calculated. The simplicity of MPTR to probe through the depth of the bed is ideal for use in CSP for dynamic thermal performance monitoring.

Corona, Javier↗
DOE OSTI2025

Comparing field and lab quantitative stable isotope probing for nitrogen assimilation in soil microbes

ABSTRACT Soil microbial communities play crucial roles in nutrient cycling and can help retain nitrogen in agricultural soils. Quantitative stable isotope probing (qSIP) is a useful method for investigating taxon-specific microbial growth and utilization of specific nutrients, such as nitrogen (N). Typically, qSIP is performed in a highly controlled lab setting, so the field relevance of lab qSIP studies remains unknown. We conducted and compared tandem lab and field qSIP to quantify the assimilation of 15 N by maize-associated soil prokaryotic communities at two agricultural sites. Here, we show that field qSIP with 15 N can be used to measure taxon-specific microbial N assimilation. Relative 15 N assimilation rates were generally lower in the field, and the magnitude of this difference varied by site. Rates differed by method (lab vs field) for 19% of the top N assimilating genera. The field and lab measures were more comparable when relative assimilation rates were weighted by relative abundance to estimate the proportion of N assimilated by each genus with only ~10% of taxa differing by method. Of those that differed, the taxa consistently higher in the lab were inclined to have opportunistic lifestyle strategies, whereas those higher in the field had niches reliant on plant roots or in-tact soil structure (biofilms, mycelia). This study demonstrates that 15 N-qSIP can be successfully performed using field-incubated soils to identify microbial allies in N retention and highlights the strengths and limitations of field and lab qSIP approaches. IMPORTANCE Soil microbes are responsible for critical biogeochemical processes in natural and agricultural ecosystems. Despite their importance, the functional traits of most soil organisms remain woefully under-characterized, limiting our ability to understand how microbial populations influence the transformation of elements such as nitrogen (N) in soil. Quantitative stable isotope probing (qSIP) is a powerful tool to measure the traits of individual taxa. This method has rarely been applied in the field or with 15 N to measure nitrogen assimilation. In this study, we measured genus-specific microbial nitrogen assimilation in two agricultural soils and compared field and lab 15 N qSIP methods. Our results identify taxa important for nitrogen assimilation in agricultural soils, shed light on the field relevance of lab qSIP studies, and provide guidance for the future application of qSIP to measure microbial traits in the field.

Reed, Kinsey (ORCID:0000000155178664)↗
DOE OSTI2025

Microbes display broad diversity in cobamide preferences

ABSTRACT Cobamides, the vitamin B 12 (cobalamin) family of cofactors, are used by most organisms but produced by only a fraction of prokaryotes, and are thus considered key shared nutrients among microbes. Cobamides are structurally diverse, with multiple different cobamides found in most microbial communities. The ability to use different cobamides has been tested for several bacteria and microalgae, and nearly all show preferences for certain cobamides. This approach is limited by the commercial unavailability of cobamides other than cobalamin. Here, we have extracted and purified seven commercially unavailable cobamides to characterize bacterial cobamide preferences based on growth in specific cobamide-dependent conditions. The tested bacteria include engineered strains of Escherichia coli , Sinorhizobium meliloti , and Bacillus subtilis expressing native or heterologous cobamide-dependent enzymes, cultured under conditions that functionally isolate specific cobamide-dependent processes such as methionine synthesis. Comparison of these results to those of previous studies of diverse bacteria and microalgae revealed that a broad diversity of cobamide preferences exists not only across different organisms but also between different cobamide-dependent metabolic pathways within the same organism. The microbes differed in the cobamides that support growth most efficiently, cobamides that do not support growth, and the minimum cobamide concentrations required for growth. The latter differ by up to four orders of magnitude across organisms from different environments and by up to 20-fold between cobamide-dependent enzymes within the same organism. Given that cobamides are shared, required for use of specific growth substrates, and essential for central metabolism in certain organisms, cobamide preferences likely impact community structure and function. IMPORTANCE Nearly all bacteria are found in microbial communities with tens to thousands of other species. Molecular interactions such as metabolic cooperation and competition are key factors underlying community assembly and structure. Cobamides, the vitamin B 12 family of enzyme cofactors, are one such class of nutrients, produced by only a minority of prokaryotes but required by most microbes. A unique aspect of cobamides is their broad diversity, with nearly 20 structural forms identified in nature. Importantly, this structural diversity impacts growth as most bacteria that have been tested show preferences for specific cobamide forms. We measured cobamide-dependent growth in several model bacteria and compared the results to those of previous analyses of cobamide preference. We found that cobamide preferences vary widely across bacteria, showing the importance of characterizing these aspects of cobamide biology to understand the impact of cobamides on microbial communities.

Mok, Kenny C. (ORCID:0000000252276987)↗
DOE OSTI2025

Tetranucleotide frequencies differentiate genomic boundaries and metabolic strategies across environmental microbiomes

Microbiomes are constrained by physicochemical conditions, nutrient regimes, and community interactions across diverse environments, yet genomic signatures of this adaptation remain unclear. Metagenome sequencing is a powerful technique to analyze genomic content in the context of natural environments, establishing concepts of microbial ecological trends. Here, we developed a data discovery tool-a tetranucleotide-informed metagenome stability diagram-that is publicly available in the integrated microbial genomes and microbiomes (IMG/M) platform for metagenome ecosystem analyses. We analyzed the tetranucleotide frequencies from quality-filtered and unassembled sequence data of over 12,000 metagenomes to assess ecosystem-specific microbial community composition and function. We found that tetranucleotide frequencies can differentiate communities across various natural environments and that specific functional and metabolic trends can be observed in this structuring. Our tool places metagenomes sampled from diverse environments into clusters and along gradients of tetranucleotide frequency similarity, suggesting microbiome community compositions specific to gradient conditions. Within the resulting metagenome clusters, we identify protein-coding gene identifiers that are most differentiated between ecosystem classifications. We plan for annual updates to the metagenome stability diagram in IMG/M with new data, allowing for refinement of the ecosystem classifications delineated here. This framework has the potential to inform future studies on microbiome engineering, bioremediation, and the prediction of microbial community responses to environmental change. IMPORTANCE: Microbes adapt to diverse environments influenced by factors like temperature, acidity, and nutrient availability. We developed a new tool to analyze and visualize the genetic makeup of over 12,000 microbial communities, revealing patterns linked to specific functions and metabolic processes. This tool groups similar microbial communities and identifies characteristic genes within environments. By continually updating this tool, we aim to advance our understanding of microbial ecology, enabling applications like microbial engineering, bioremediation, and predicting responses to environmental change.

Kellom, Matthew↗
DOE OSTI2023

A transcriptomic atlas of acute stress response to low pH in multiple Issatchenkia orientalis strains

Because of its natural stress tolerance to low pH, Issatchenkia orientalis (a.k.a. Pichia kudriavzevii) is a promising non-model yeast for bio-based production of organic acids. Yet, this organism is relatively unstudied, and specific mechanisms of its tolerance to low pH are poorly understood, limiting commercial use. In this study, we selected 12 I. orientalis strains with varying acid stress tolerance (six tolerant and six susceptible) and profiled their transcriptomes in different pH conditions to study potential mechanisms of pH tolerance in this species. We identified hundreds of genes whose expression response is shared by tolerant strains but not by susceptible strains, or vice versa, as well as genes whose responses are reversed between tolerant and susceptible strains. We mapped regulatory mechanisms of transcriptomic responses via motif analysis as well as differential network reconstruction, identifying several transcription factors, including Stb5, Mac1, and Rtg1/Rtg3, some of which are known for their roles in acid response in Saccharomyces cerevisiae. Functional genomics analysis of short-listed genes and transcription factors suggested significant roles for energy metabolism and translation-related processes, as well as the cell wall integrity pathway and RTG-dependent retrograde signaling pathway. Finally, we conducted additional experiments for two organic acids, 3-hydroxypropionate and citramalate, to eliminate acid-specific effects and found potential roles for glycolysis and trehalose biosynthesis specifically for response to low pH. In summary, our approach of comparative transcriptomics and phenotypic contrasting, along with a multi-pronged bioinformatics analysis, suggests specific mechanisms of tolerance to low pH in I. orientalis that merit further validation through experimental perturbation and engineering.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Data preservation in high energy physics

Data preservation is a mandatory specification for any present and future experimental facility and it is a cost-effective way of doing fundamental research by exploiting unique data sets in the light of the continuously increasing theoretical understanding. This document summarizes the status of data preservation in high energy physics. The paradigms and the methodological advances are discussed from a perspective of more than ten years of experience with a structured effort at international level. The status and the scientific return related to the preservation of data accumulated at large collider experiments are presented, together with an account of ongoing efforts to ensure long-term analysis capabilities for ongoing and future experiments. Transverse projects aimed at generic solutions, most of which are specifically inspired by open science and FAIR principles, are presented as well. A prospective and an action plan are also indicated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Benchmarking for AI for Science

AI has been instrumental for recent developments in a number of domains of the sciences. With several hundred machine learning (ML) algorithms and models, and numerous AI-specific hardware platforms, a common quest for all scientists working on AI for Science is around the selection of machine learning algorithm(s) to solve their domain-specific scientific problems. A number of different initiatives around AI Benchmarking have been set up and have been useful in understanding the benefits of different ML algorithms for different tasks.However, with the majority of these AI Benchmarking initiatives focusing on the conventional notions of benchmarking, where the focus is purely runtime performance (such as training time or inference time), their suitability for benchmarking different ML algorithms for solving scientific problems has been viewed as a performance problem even though both are hardly the same. To make reasonable, explainable, and justifiable advancements in science using AI, it is critical to focus on the merits of these algorithms in handling different domain science problems. In other words, more emphasis must be given on Benchmarking for AI for Science than AI Benchmarking. The vision of the former is not only to assess the performance of ML algorithms, but also to assess, and understand the benefits and merits of different ML algorithms in handling scientific problems. Benchmarking for AI for Science, instead of pure performance focused AI Benchmarking, has several benefits: (i) it has the potential to offer advances in the sciences, much more rapidly than through pure performance-based AI methods, (ii) it will encourage the community to focus on developing better domain-specific AI techniques, particularly given the provision for being able to benchmark different techniques, and (iii) it will encourage hardware manufacturers to focus on developing science-specific hardware subsystems.

Thiyagalingam, Jeyan↗
DOE OSTI2022

Power Converter Circuit Design Automation using Parallel Monte Carlo Tree Search

The tidal waves of modern electronic/electrical devices have led to increasing demands for ubiquitous application-specific power converters. A conventional manual design procedure of such power converters is computation- and labor-intensive, which involves selecting and connecting component devices, tuning component-wise parameters and control schemes, and iteratively evaluating and optimizing the design. To automate and speed up this design process, we propose an automatic framework that designs custom power converters from design specifications using Monte Carlo Tree Search. Specifically, the framework embraces the upper-confidence-bound-tree (UCT), a variant of Monte Carlo Tree Search, to automate topology space exploration with circuit design specification-encoded reward signals. Moreover, our UCT-based approach can exploit small offline data via the specially designed default policy and can run in parallel to accelerate topology space exploration. Further, it utilizes a hybrid circuit evaluation strategy to substantially reduce design evaluation costs. Empirically, we demonstrated that our framework could generate energy-efficient circuit topologies for various target voltage conversion ratios. Compared to existing automatic topology optimization strategies, the proposed method is much more computationally efficient --- the sequential version can generate topologies with the same quality while being up to 67% faster. Here, the parallelization schemes can further achieve high speedups compared to the sequential version.

24 POWER TRANSMISSION AND DISTRIBUTION↗