Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAMPLE PREPARATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Enhanced photocatalytic degradation of phenol over Ag3PO4-BiOCl1−xBrx composites

Highlights: • Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} composites were successfully synthesized and characterized. • The band energy of composites can be tunable by solid-solution strategy. • Appropriate band-gap structure facilitates charge separation property and light absorption. - Abstract: In this paper, a series of Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} composites with adjustable band gap has been fabricated by using a facile two-step synthetic method. The photocatalytic activity of Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} was evaluated by photocatalytic decomposition of phenol aqueous solution under simulated solar light irradiation. The result shows that Ag{sub 3}PO{sub 4}-BiOCl{sub 0.75}Br{sub 0.25} (1:5) composite possesses the best photocatalytic activity among all the as-prepared samples. The photocatalytic activity of Ag{sub 3}PO{sub 4}-BiOCl can be enhanced mainly owing to the strong light absorption ability by loading Ag{sub 3}PO{sub 4} on the surface of BiOCl, while the photocatalytic activities of Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} (x = 0.25, 0.5, 0.75 and 1) composites could be enhanced by restraining the recombination of photo-generated electron-hole pairs. The enhanced solar-light photocatalytic activities of Ag{sub 3}PO{sub 4}-BiOCl{sub 1−x}Br{sub x} composites could be ascribed to the adjustable energy band structure, which facilitates the separation of photoinduced carriers. In addition, superoxide radicals (O{sub 2}{sup −}), holes (h{sup +}) and OH are considered to dominate the photocatalytic degration process. Moreover, a possible mechanism of deep understanding on the base of experimental results was proposed.

36 MATERIALS SCIENCE↗

Phase transition and luminescence properties of GdTiNbO6:Eu3+ formed by hydrothermal route

Highlights: • Phase transition and luminescence of hydrothermal GdTiNbO{sub 6}:Eu{sup 3+} were investigated. • RE{sup 3+} radius 0.1061 nm was the boundary between the aeschynite and euxenite. • GdTiNbO{sub 6}:0.30Eu{sup 3+} was preferred for UV-B excitation, 0.50Eu{sup 3+} for Vis-light excitation. • The decay lifetime of 615 nm emission (ex = 405 nm) was 570∼571 μs. - Abstract: The dependences of phase transition and luminescence properties upon both Eu{sup 3+} concentration and heating temperature in air were investigated for GdTiNbO{sub 6}:Eu{sup 3+} fine crystals formed hydrothermally at 240 °C as aeschynite-type Eu{sub x}Gd{sub 1-x}TiNbO{sub 6} solid solution. The as-prepared aeschynite solid solution in the concentration range x ≥ 0.70 did not show the phase transformation from an aeschynite- to an euxenite-type structure caused by heating at 1300 °C for 1 h in air. The present study suggested that the phase boundary between the aeschynite- and euxenite-type RETiNbO{sub 6} in the EuTiNbO{sub 6}-GdTiNbO{sub 6} system, where RE was a rare earth, lay in the average RE{sup 3+} ionic radius 0.1061 nm. The intense emissions attributed to the {sup 5}D{sub 0}→{sup 7}F{sub 1} and {sup 5}D{sub 0}→{sup 7}F{sub 2} transitions of Eu{sup 3+} for the as-prepared samples were more improved by heating at 1100–1300°C in air. The material doped with 30 mol% Eu{sup 3+} was preferred for UV-B excitation, in contrast, the material with 50 mol% Eu{sup 3+} was preferred for visible light excitation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

RGO/BaFe12O19/Fe3O4 nanocomposite as microwave absorbent with lamellar structures and improved polarization interfaces

Highlights: • RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} nanocomposite are prepared via a two-step solvothermal method. • The maximum reflection loss can reach −46.04 dB, and the effective absorption bandwidth under −10 dB is 5.68 GHz. • Interfacial polarization as one of the mechanism for the enhanced absorption properties was detailedly analyzed. - Abstract: In this paper, we designed and prepared a composite of BaFe{sub 12}O{sub 19} (BFO) flakes, two-dimensional graphene and Fe{sub 3}O{sub 4} nanoparticles using a two-step solvothermal method. The combination of BFO flakes and two-dimensional graphene could effectively enhance the heterointerface and is believed to be favorable to enhance the interface polarization. The introduction of inverse spinel Fe{sub 3}O{sub 4} as the third phase could increase the saturated magnetization. The phase structure, morphology, magnetic properties and electromagnetic wave absorption performance of the as-prepared samples were characterized. Due to the enhanced interfacial polarization between the BaFe{sub 12}O{sub 19} flakes and graphene, the composite of RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} exhibits excellent microwave absorption properties. The maximum reflection loss can reach -46.04 dB at 15.6 GHz with a thickness of 1.8 mm, and the effective absorption bandwidth reaches 5.68 GHz (from 11.60 GHz to 17.28 GHz). It is believed that the RGO/BaFe{sub 12}O{sub 19}/Fe{sub 3}O{sub 4} composites can find potential application in the field of microwave absorption due to their excellent absorption properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solution combustion synthesis of LaxSm1−xMn2O5 nanoparticles and their electrocatalytic performances for Al-air batteries

Highlights: • Pure-phase La{sub x}Sm{sub 1−x}Mn{sub 2}O{sub 5} were firstly achieved through one step calcined solution combustion synthesis with high yield. • The main impact of La/Sm is the amount of surface adsorbed oxygen and surface Mn{sup 4+} ions as revealed by XPS results. • The La{sub 0.1}Sm{sub 0.9}Mn{sub 2}O{sub 5} exhibited the highest activity, which has an appropriate ratio between oxygen vacancies and Mn{sup 3+}. • The cell produced with La{sub 0.1}Sm{sub 0.9}Mn{sub 2}O{sub 5} exhibits flat discharge curves in 40 h above 1.5 V. - Abstract: Compared the most reported synthesis methods, a series of La{sub x}Sm{sub 1−x}Mn{sub 2}O{sub 5} (x = 0, 0.1, 0.3, 0.5) catalysts were first synthesized through sol-gel solution combustion synthesis with a short cycle and high yield. The main impact of different La/Sm molar ratios is the amount of surface adsorbed oxygen (O{sub ads}) and surface Mn{sup 4+} ions as revealed by XPS results. Electrochemical properties are characterized by rotating disk electrode (RDE) and the full dischargeable Al-air battery with 4 M NaOH electrolyte. The measurements of RDE reveal that the electron transfer number of La{sub x}Sm{sub 1−x}Mn{sub 2}O{sub 5} (x = 0, 0.1, 0.3, 0.5) are all closed to 4, and the sample prepared with x = 0.1 possesses the most excellent electrocatalytic activity for oxygen reduction reaction (ORR) and good discharge performance in alkaline medium. All of the above results indicate that the La{sub x}Sm{sub 1−x}Mn{sub 2}O{sub 5} (x = 0, 0.1, 0.3, 0.5) are promising catalysts with a high catalytic activity toward ORR.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Strong interlayer coupling and long-lived interlayer excitons in two-dimensional perovskite derivatives and transition metal dichalcogenides van der Waals heterostructures

Two-dimensional (2D) van der Waals (vdW) heterostructures offer new platforms for exploring novel physics and diverse applications ranging from electronics and photonics to optoelectronics at the nanoscale. The studies to date have largely focused on transition-metal dichalcogenides (TMDCs) based samples prepared by mechanical exfoliation method, therefore it is of signi ficant interests to study high-quality vdW heterostructures using novel materials prepared by a versatile method. Here, we report a two-step vapor phase growth process for the creation of high-quality vdW heterostructures based on perovskites and TMDCs, such as 2D Cs 3 Bi 2 I 9 /MoSe 2 , with a large lattice mismatch. Supported by experimental and theoretical investigations, we discover that the Cs 3 Bi 2 I 9 /MoSe 2 vdW heterostructure possesses hybrid band alignments consisting of type -I and type-II heterojunctions because of the existence of defect energy levels in Cs 3 Bi 2 I 9 . More importantly, we demonstrate that the type-II heterojunction in the Cs 3 Bi 2 I 9 /MoSe 2 vdW heterostructure not only shows a higher interlayer exciton density, but also exhibits a longer interlayer exciton lifetime than traditional 2D TMDCs based type-II heterostructures. We attribute this phenomenon to the reduced overlap of electron and hole wavefunctions caused by the large lattice mismatch. Finally, our work demonstrates that it is possible to directly grow high-quality vdW heterostructures based on entirely different materials which provide promising platforms for exploring novel physics and cutting-edge applications, such as optoelectronics, valleytronics, and high-temperature super fluidity.

36 MATERIALS SCIENCE↗

ToF-SIMS in material research: A view from nanoscale hydrogen detection

Hydrogen in materials has attracted tremendous interest as its incorporation leads to significant alterations in nanoscale structure, composition, and chemistry, impacting functional properties. It has also been integral to nuclear fusion reactors and is considered a future clean energy source. However, nanoscale characterization and manipulation of hydrogen in materials are challenging as only a selected few analytical techniques can readily detect hydrogen, among which time-of-flight secondary ion mass spectrometry (ToF-SIMS) is a unique and powerful one due to its excellent detection limit along with decent depth and lateral resolutions. Here, in this review, we discuss, using selected examples, how to detect and quantify hydrogen in materials by ToF-SIMS and its impact on revealing the hydrogenation/protonation-induced novel functional states in different classes of materials. In addition, we present our protocols on sample preparation and experimental conditions optimization, allowing us to achieve the best possible results. Finally, we highlight future research directions that can lead to the discovery of novel functional states and ultimately provide a deeper understanding of scientific questions in materials science.

36 MATERIALS SCIENCE↗

Multi-lab study on the pure-gas permeation of commercial polysulfone (PSf) membranes: Measurement standards and best practices

Gas-separation membranes are a critical industrial component for a low-carbon and energy-efficient future. As a result, many researchers have been testing membrane materials over the past several decades. Unfortunately, almost all membrane-based testing systems are home-built, and there are no widely accepted material standards or testing protocols in the literature, making it challenging to accurately compare experimental results. Further, in this multi-lab study, ten independent laboratories collected high-pressure pure-gas permeation data for H 2 , O 2 , CH 4 , and N 2 in commercial polysulfone (PSf) films. Equipment information, testing procedures, and permeation data from all labs were collected to provide (1) accepted H 2 , O 2 , CH 4 , and N 2 permeability values at 35°C in PSf as a reference standard, (2) statistical analysis of lab-to-lab uncertainties in evaluating permeability, and (3) a list of best practices for sample preparation, equipment set-up, and permeation testing using constant-volume variable-pressure apparatuses. Results summarized in this work provide a reference standard and recommended testing protocols for pure-gas testing of membrane materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

4D nano-tomography of electrochemical energy devices using lab-based X-ray imaging

Electrochemical energy devices offer a variety of alternate means for low-carbon, multi-scale energy conversion and storage. Reactions in these devices are supported by electrodes with characteristically complex microstructures. To meet the increasing capacity and lifetime demands across a range of applications, it is essential to understand microstructural evolutions at a cell and electrode level which are thought to be critical aspects influencing material and device lifetime and performance. X-ray computed tomography (CT) has become a highly employed method for non-destructive characterisation of such microstructures with high spatial resolution. However, sub-micron resolutions present significant challenges for sample preparation and handling particularly in 4D studies, (three spatial dimensions plus time). Here, microstructural information is collected from the same region of interest within two electrode materials: a solid oxide fuel cell and the positive electrode from a lithium-ion battery. Using a lab-based X-ray instrument, tomograms with sub-micron resolutions were obtained between thermal cycling. The intricate microstructural evolutions captured within these two materials provide model examples of 4D X-ray nano-CT capabilities in tracking challenging degradation mechanisms. Furthermore, this technique is valuable in the advancement of electrochemical research as well as broader applications for materials characterisation.

25 ENERGY STORAGE↗

10 Be at iThemba LABS using a silicon nitride membrane stack as absorber for isobar suppression

10 Be is an important isotope for accelerator mass spectrometry (AMS) because of the demand for cosmogenic radionuclide dating methods in the earth science and paleo-sciences community. At the iThemba Laboratory for Accelerator Based Science (iThemba LABS) we implemented full suppression of the interfering isobar 10 B using a silicon nitride foil-stack, utilizing the 2+ charge state for high efficiency. We demonstrate the performance of this newly established AMS system using standards and test samples. Here we further present the results of an inter-comparison between iThemba LABS and the Center for Accelerator Mass Spectrometry/Lawrence Livermore National Laboratory, on AMS samples prepared from purified quartz at the University of Vermont. The results for 10 Be from the laboratories are in close agreement, fully consistent with cross-calibration between them. AMS results for 26 Al are in similarly good agreement, demonstrating the performance and accuracy of iThemba LABS for the most commonly measured in situ produced cosmogenic nuclides.

10-Be↗

Creep suppression and fatigue in bio-based composites manufactured via conventional and large format additive manufacturing processes

The emergence of novel extrusion-based additive manufacturing (AM) processes has prompted the development of new thermoplastic composite feedstocks, and broadening sustainability initiatives have driven the development of bio-based and recyclable material for AM feedstocks. Poly(lactic acid) (PLA) with wood flour (WF) is one composite system that has been demonstrated in numerous AM applications, as well as traditional processing methods (i.e., compression and injection molding); however, there has been a need to understand how the variation in processing methodology impacts the material performance of these bio-based feedstocks from a fundamental perspective, with particular emphasis on creep for an extended application use-life. Herein, PLA/WF is explored as a feedstock material for large format additive manufacturing (LFAM) and the performance of additively manufactured materials is compared to those produced via more traditional processing methods. It is also demonstrated that the addition of WF decreases the material’s coefficient of thermal expansion (CTE) while increasing its Young’s modulus, susceptibility to water uptake, and creep fatigue resistance. Essentially, the addition of 20 wt% WF results in a 92 % decrease in rubbery regime CTE while simultaneously resulting in a 14 % increase in modulus, 190 % increase in water uptake, and a 31 % decrease in residual strain after cyclic creep tests. The processing method was also found to play a large role in the final part performance, with the printed material increasing the crystallinity by 183 % and 214 % compared to its compression and injection molded counterparts. Furthermore, the porosity of printed samples increased by two orders of magnitude compared to samples prepared via traditional processing methods.

36 MATERIALS SCIENCE↗

Direct comparison of gamma, electron beam and X-ray irradiation doses on characteristics of low-density polyethylene, polypropylene homopolymer, polyolefin elastomer and chlorobutyl rubber medical device polymers

There is a growing need for increased efficiency in the sterilization of single use medical devices and other products that contain polymer components. Gamma radiation is widely used for devices suited for radiation sterilization; however, safety, throughput and cobalt-60 source availability are challenging the prospect of relying on gamma radiation to meet the anticipated needs of the industry. Use of electron beam (e-beam) and X-rays as alternatives to gamma for radiation sterilization have been hampered in part by a concern that these modalities may adversely affect polymer integrity and performance relative to the gamma method, for which the industry has had much more experience. To address this concern, the effects of sterilization-relevant doses of ebeam, X-ray and gamma radiation were directly compared using common medical device polymers found in two prototypical commercial devices currently sterilized using cobalt-60 gamma irradiation. The Becton, Dickinson and Company (BD) Vacutainer™ Plus tube contains low-density polyethylene and chlorobutyl rubber components, while the BD Vacutainer™ Push Button Blood Collection Set contains polypropylene homopolymer and polyolefin elastomer components. Injection-molded samples prepared from the polymers used in these products were exposed to target doses of 15, 35, 50 and 80 kGy using gamma, e-beam and X-ray radiation. Changes in coloration, tensile properties and hardness were measured for each condition, and the effects of e-beam and X-ray irradiation compared with the effects of gamma irradiation on these properties. Both e-beam and X-ray appear as viable alternatives to gamma irradiation for sterilization of the polymers tested.

sterilization, gamma, X-ray, electron beam, radiat↗

Evaluation of high resolution X-ray monochromatic wavelength dispersive X-ray fluorescence instrument for determining Pu and U in nuclear reprocessing streams

In this study, an alpha-prototype benchtop instrument was developed and tested for measuring Pu and U in spent fuel dissolver tanks in a nuclear fuel reprocessing plant. The high resolution X-ray (hiRX) instrument was designed with the aim of providing a new capability to measure samples with high radiation background with selectivity, accuracy, and precision using ultra-low volumes (7 μL) of liquid. The instrument was tested with specimens from the operational reprocessing facility at Savannah River National Laboratory. The results showed that bias was <6% for Pu nitrate process solution and < 18% for Pu in U/HNO 3 matrix. Instrumental precision was <1% RSD while between microcell repeatability was <6% RSD. The limit of detection for Pu in HNO 3 matrix was 3 × 10 -5 g/L (100 s, 35 W). Finally, this study demonstrates that hiRX technology has the potential to provide rapid and simultaneous quantification of Pu and U without sample preparation, making it suitable for process monitoring and materials control and accountability applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Small-angle X-ray scattering: a bridge between RNA secondary structures and three-dimensional topological structures

Whereas the structures of small to medium-sized well folded RNA molecules often can be determined by either X-ray crystallography or NMR spectroscopy, obtaining structural information for large RNAs using experimental, computational, or combined approaches remains a major interest and challenge. RNA is very sensitive to small-angle X-ray scattering (SAXS) due to high electron density along phosphate-sugar backbones, whose scattering contribution dominates SAXS intensity. For this reason, SAXS is particularly useful in obtaining global RNA structural information that outlines backbone topologies and, therefore, molecular envelopes. Such information is extremely valuable in bridging the gap between the secondary structures and three-dimensional topological structures of RNAmolecules, particularly those that have proven difficult to study using other structuredetermination methods. Here we review published results of RNA topological structures derived from SAXS data or in combination with other experimental data, as well as details on RNA sample preparation for SAXS experiments.

59 BASIC BIOLOGICAL SCIENCES↗

Metabolomics approaches for discovering biomarkers of drug-induced hepatotoxicity and nephrotoxicity

Hepatotoxicity and nephrotoxicity are two major reasons that drugs are withdrawn post-market, and hence it is of major concern to both the FDA and pharmaceutical companies. The number of cases of serious adverse effects (SAEs) in marketed drugs has climbed faster than the number of total drug prescriptions issued. In some cases, preclinical animal studies fail to identify the potential toxicity of a new chemical entity (NCE) under development. The current clinical chemistry biomarkers of liver and kidney injury are inadequate in terms of sensitivity and/or specificity, prompting the need to discover new translational specific biomarkers of organ injury. Metabolomics along with genomics and proteomics technologies have the capability of providing translational diagnostic and prognostic biomarkers specific for early stages of liver and kidney injury. Metabolomics has several advantages over the other omics platforms such as ease of sample preparation, data acquisition and use of biofluids collected through minimally invasive procedures in preclinical and clinical studies. The metabolomics platform is reviewed with particular emphasis on applications involving drug-induced hepatotoxicity and nephrotoxicity. Analytical platforms for metabolomics, chemometrics for mining metabolomics data and the applications of the metabolomics technologies are covered in detail with emphasis on recent work in the field.

60 APPLIED LIFE SCIENCES↗

Long-Range Order of Cylinders in Diblock Copolymer Thin Films Using Graphoepitaxy

Topographically patterned substrates are known to induce long-range lateral order in spherical diblock copolymers, but it is not clear that similar confinement will also order cylindrical diblock copolymers across the whole surface. The role of graphoepitaxial parameters including trough width and mesa height on the ordering process of cylindrical domains in diblock copolymers thin films is monitored in this study. The quantification of order was achieved by the calculation of an order parameter of the hexagonally packed cylinders. These results demonstrate that graphoepitaxy is an effective method to induce long-range order in cylindrical domain diblock copolymer systems. An increase in order was observed in samples prepared on the mesas and in troughs of widths up to 20 m, and mesa heights greater than 1.0 but less than 5.0 L0 The role of molecular weight on the kinetics of the ordering process of cylindrical domains in diblock copolymers thin films is also monitored in this study, where ordering is readily observed for lower molecular weight copolymers (number average molecular weight, Mn=63,000), but not for larger copolymers (Mn=230,000). The reduction of the rate of formation of long-range order is attributed to the impeded diffusion of higher molecular weight polymers. These results demonstrate that there will exist upper limits on the molecular weights of diblock copolymers that can be used to create nanoscale templates with longrange order, which also translates to an upper limit in pore size and spacing in these templates.

36 MATERIALS SCIENCE↗

Wet-chemical etching of FIB lift-out TEM lamellae for damage-free analysis of 3-D nanostructures

Reducing ion beam damage from the focused ion beam (FIB) during fabrication of cross sections is a well-known challenge for materials characterization, especially cross sectional characterization of nanostructures. To address this, a new method has been developed for cross section fabrication enabling high resolution transmission electron microscopy (TEM) analysis of 3-D nanostructures free of surrounding material and free of damage detectable by TEM analysis. Before FIB processing, nanopillars are encapsulated in a sacrificial oxide which acts as a protective layer during FIB milling. Furthermore, the cross sectional TEM lamella containing the nanopillars is then mounted and thinned with some modifications to conventional FIB sample preparation that provide stability for the lamella during the following wet-chemical dip etch. The wet-chemical etch of the TEM lamella removes the sacrificial oxide layer, freeing the nanopillars from any material that would obscure TEM imaging. Both high resolution TEM and aberration corrected scanning TEM images of Si/SiGe pillars with diameters down to 30 nm demonstrate the successful application of this approach.

3-d nanostructure analysis↗