Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Resistivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Splice Resistance Measurements in 2G YBCO Coated Conductor

Abstract The Oak Ridge National Laboratory has been investigating the electrical splice resistance of second-generation (2G) YBCO coated conductor. The purpose of the experimental investigation is to study the splice resistance of 2G YBCO coated conductor as a function of: a) operating temperature, b) magnetic field strength (B-field), and c) magnetic field orientation ( ). Understanding the splice resistance with its corresponding variation as a function of surface preparation and operating conditions is essential to the practical implementation of electric utility devices; e.g., motors, generators, transformers, cables, and fault-current limiters, etc. Preliminary test results indicate that the 2G YBCO splice resistance shows a weak temperature dependence and a significantly stronger dependence upon magnetic field strength and magnetic field orientation. Surface preparation conditions are also briefly discussed. Index Terms coated conductor, splice, critical current, YBCO

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of nuclear proliferation resistance reprocessing and recycling technologies

The PUREX process has been progressively and continuously improved during the past three decades, and these improvements account for successful commercialization of reprocessing in a few countries. The renewed interest in nuclear energy and the international growth of nuclear electricity generation do not equate – and should not be equated -with increasing proliferation risks. Indeed, the nuclear renaissance presents a unique opportunity to enhance the culture of non-proliferation. With the recent revival of interest in nuclear technology, technical methods for prevention of nuclear proliferation are being revisited. Robust strategies to develop new advanced separation technologies are emerging worldwide for sustainability and advancement of nuclear energy with enhanced proliferation resistance. On the other hand, at this moment, there are no proliferation resistance advanced technologies. . Until now proliferation resistance as it applies to reprocessing has been focused on not separating a pure stream of weapons-usable plutonium. France, as an example, has proposed a variant of the PUREX process, the COEX TM process, which does not result on a pure plutonium product stream. A further step is to implement a process based on group extraction of actinides and fission products associated with a homogeneous recycling strategy (UNEX process in the US, GANEX process in France). Such scheme will most likely not be deployable on an industrial scale before 2030 or so because it requires intensive R&D and robust flowsheets. Finally, future generation recycling schemes will handle the used nuclear fuel in fast neutron reactors. This means that the plutonium throughput of the recycling process may increase. The need is obvious for advanced aqueous recycling technologies that are intrinsically more proliferation resistant than the commercial PUREX process. In this paper, we review the actual PUREX process along with the advanced recycling technologies that will enhance technical barriers, making plutonium diversion more difficult by not isolating plutonium or/and coexistence of fission products with plutonium.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Longitudinal Resistive Charge Division in Multi-Channel Silicon Strip Sensors

Using a discrete RC network with characteristics approximating those of a high-precision silicon microstrip sensor, we have explored the use of resistive charge division to estimate the position of charge deposition in the direction parallel to the length of the sensor strips. For an electrode with distributed resistance and capacitance of 600 k{Omega} and 12.5 pF, respectively (similar to values expected for a 10 cm long resistive silicon microstrip), we estimate the fractional resolution to be {+-}6.1% of the length of the sensor. We find this value to be independent of resistance, to depend weakly on strip capacitance, and to apply for both isolated single electrodes as well as sensors with multiple parallel electrodes with significant capacitive coupling between electrodes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Out of band radiation effects on resist patterning

Our previous work estimated the expected out-of-band (OOB) flare contribution at the wafer level assuming that there is a given amount of OOB at the collector focus. We found that the OOB effects are wavelength, resist, and pattern dependent. In this paper, results from rigorous patterning evaluation of multiple OOB-exposed resists using the SEMATECH Berkeley 0.3-NA MET are presented. A controlled amount of OOB is applied to the resist films before patterning is completed with the MET. LER and process performance above the resolution limit and at the resolution limits are evaluated and presented. The results typically show a negative impact on LER and process performance after the OOB exposures except in the case of single resist formulation, where resolution and performance improvement was observed.

36 MATERIALS SCIENCE↗

Creep resistant high temperature martensitic steel

The disclosure provides a creep resistant alloy having an overall composition comprised of iron, chromium, molybdenum, carbon, manganese, silicon, nickel, vanadium, niobium, nitrogen, tungsten, cobalt, tantalum, boron, and potentially additional elements. In an embodiment, the creep resistant alloy has a molybdenum equivalent Mo(eq) from 1.475 to 1.700 wt. % and a quantity (C+N) from 0.145 to 0.205. The overall composition ameliorates sources of microstructural instability such as coarsening of M.sub.23C.sub.6 carbides and MX precipitates, and mitigates or eliminates Laves and Z-phase formation. A creep resistant martensitic steel may be fabricated by preparing a melt comprised of the overall composition followed by at least austenizing and tempering. The creep resistant alloy exhibits improved high-temperature creep strength in the temperature environment of around 650.degree. C.

36 MATERIALS SCIENCE↗

Magnetic field annealing for improved creep resistance

The method provides heat-resistant chromia- or alumina-forming Fe-, Fe(Ni), Ni(Fe), or Ni-based alloys having improved creep resistance. A precursor is provided containing preselected constituents of a chromia- or alumina-forming Fe-, Fe(Ni), Ni(Fe), or Ni-based alloy, at least one of the constituents for forming a nanoscale precipitate MaXb where M is Cr, Nb, Ti, V, Zr, or Hf, individually and in combination, and X is C, N, O, B, individually and in combination, a=1 to 23 and b=1 to 6. The precursor is annealed at a temperature of 1000-1500.degree. C. for 1-48 h in the presence of a magnetic field of at least 5 Tesla to enhance supersaturation of the M.sub.aX.sub.b constituents in the annealed precursor. This forms nanoscale M.sub.aX.sub.b precipitates for improved creep resistance when the alloy is used at service temperatures of 500-1000.degree. C. Alloys having improved creep resistance are also disclosed.

36 MATERIALS SCIENCE↗

Methods for resistive switching of memristors

The present invention is directed generally to resistive random-access memory (RRAM or ReRAM) devices and systems, as well as methods of employing a thermal resistive model to understand and determine switching of such devices. In particular example, the method includes generating a power-resistance measurement for the memristor device and applying an isothermal model to the power-resistance measurement in order to determine one or more parameters of the device (e.g., filament state).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Creep resistant high temperature martensitic steel

The disclosure provides a creep resistant alloy having an overall composition comprised of iron, chromium, molybdenum, carbon, manganese, silicon, nickel, vanadium, niobium, nitrogen, tungsten, cobalt, tantalum, boron, copper, and potentially additional elements. In an embodiment, the creep resistant alloy has a molybdenum equivalent Mo(eq) from 1.475 to 1.700 wt. % and a quantity (C+N) from 0.145 to 0.205. The overall composition ameliorates sources of microstructural instability such as coarsening of M.sub.23C.sub.6carbides and MX precipitates, and mitigates or eliminates Laves and Z-phase formation. A creep resistant martensitic steel may be fabricated by preparing a melt comprised of the overall composition followed by at least austenizing and tempering. The creep resistant alloy exhibits improved high-temperature creep strength in the temperature environment of around 650.degree. C.

36 MATERIALS SCIENCE↗

Adaptive Water-Resistive Barrier for Building Envelopes

Excessive moisture transport into building enclosures can lead to elevated moisture levels in wall cavities and associated damage. Such conditions can also produce increased energy consumption. Currently, architects and builders are limited to using static membranes as water-resistive barriers that exhibit a single vapor permeance irrespective of environmental conditions. Membranes with a high permeance may allow moisture ingression under hot and humid ambient conditions, while membranes with a low permeance may not allow wall cavities to dry out when moisture accumulates within them.An electrostatically actuated, dual permeance membrane previously demonstrated for protective apparel is under development for use as a water-resistive barrier for building envelopes. When outdoor temperature and relative humidity are high as detected by sensors, the membrane exhibits low permeance (~0.5 perms) to inhibit water vapor ingression into the building enclosure; but when humidity in the wall cavity is high, the membrane exhibits high permeance (~50 perms) to facilitate water vapor egression to the outside. The membrane changes state by electrostatic actuation using a very low current electrical power supply.In order to quantify the benefits of a dual permeance water-resistive barrier, WUFI® hygrothermal modeling simulations were completed comparing the adaptive membrane to conventional fixed permeance membranes relative to inhibiting mold growth for various US climates and several wall constructions. The WUFI® code was modified to accommodate switching the permeance of the adaptive membrane between low and high permeance states for several humidity setpoint control strategies. The effect of liquid water leakage into the wall cavity was also considered.This report summarizes the initial steps in development of dual permeance, electrostatically actuated water-resistive barriers focusing on the results of hygrothermal model simulations of these adaptive structures and testing of subscale adaptive structures to demonstrate the capability of the technology to achieve the preferred permeance levels suggested by the modeling.

Trentacosta, Joseph↗

Grain boundary enhanced UN and U3Si2 pellets with improved oxidation resistance

A method of forming a water resistant boundary on a fissile material for use in a water cooled nuclear reactor is described. The method comprises mixing a powdered fissile material selected from the group consisting of UN and U 3 Si 2 with an additive selected from oxidation resistant materials having a melting or softening point lower than the sintering temperature of the fissile material, pressing the mixed fissile and additive materials into a pellet, sintering the pellet to a temperature greater than the melting point of the additive. Alternatively, if the melting point of the oxidation resistant particles is greater than the sintering temperature of UN or U 3 Si 2 , then the oxidation resistant particles can have a particle size distribution less than that of the UN or U 3 Si 2 .

Lahoda, Edward J.↗

Grain boundary enhanced UN and U 3 Si 2 pellets with improved oxidation resistance

A method of forming a water resistant boundary on a fissile material for use in a water cooled nuclear reactor is described. The method comprises mixing a powdered fissile material selected from the group consisting of UN and U3Si2 with an additive selected from oxidation resistant materials having a melting or softening point lower than the sintering temperature of the fissile material, pressing the mixed fissile and additive materials into a pellet, sintering the pellet to a temperature greater than the melting point of the additive. Alternatively, if the melting point of the oxidation resistant particles is greater than the sintering temperature of UN or U3Si2, then the oxidation resistant particles can have a particle size distribution less than that of the UN or U3Si2.

Lahoda, Edward J.↗

Proliferation resistance assessments during the design phase of a recycling facility as a means of reducing proliferation risks

The sustainability criterion for Gen IV nuclear energy systems inherently presumes the availability of efficient fuel recycling capabilities. One area for research on advanced fuel recycling concerns safeguards aspects of this type of facilities. Since a recycling facility may be considered as sensitive from a non-proliferation perspective, it is important to address these issues early in the design process, according to the principle of Safeguards By Design. Presented in this paper is a mode of procedure, where assessments of the proliferation resistance (PR) of a recycling facility for fast reactor fuel have been performed so as to identify the weakest barriers to proliferation of nuclear material. Two supplementing established methodologies have been applied; TOPS (Technological Opportunities to increase Proliferation resistance of nuclear power Systems) and PR-PP (Proliferation Resistance and Physical Protection evaluation methodology). The chosen fuel recycling facility belongs to a small Gen IV lead-cooled fast reactor system that is under study in Sweden. A schematic design of the recycling facility, where actinides are separated using solvent extraction, has been examined. The PR assessment methodologies make it possible to pinpoint areas in which the facility can be improved in order to reduce the risk of diversion. The initial facility design may then be slightly modified and/or safeguards measures may be introduced to reduce the total identified proliferation risk. After each modification of design and/or safeguards implementation, a new PR assessment of the revised system can then be carried out. This way, each modification can be evaluated and new ways to further enhance the proliferation resistance can be identified. This type of iterative procedure may support Safeguards By Design in the planning of new recycling plants and other nuclear facilities. (authors)

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Evaluating the Chemical Resistance of Salt-stone Disposal Unit (SDU) Concrete and Polymeric Coatings - 18494

Salt-stone Disposal Units (SDUs) are multi-million liter concrete structures that are used at the Savannah River Site (SRS) for the permanent disposal of low-activity salt solution incorporated in a cementitious grout matrix, termed salt-stone. The major chemical constituents of the salt solution include sodium, aluminum, nitrate, nitrite, hydroxide, carbonate, and sulfate. The potential exists for the SDU interior to be chronically exposed to these corrosive constituents resulting in deleterious reactions and physical damage. Sulfate attack is an example of such an interaction whereby aqueous sulfates may penetrate the concrete, and react with hydration products in the cured concrete to form expansive phases that can cause excessive strains and cracking. Recently constructed SDUs have utilized sulfate-resistant Type V cement and polymeric coatings to minimize the potential impacts of SDU concrete exposure to the highly caustic (pH > 13) salt solution. Not only must the concrete and coatings exhibit high resistance to the caustic salt solution but they are also subjected to above ambient temperatures due to the exothermic nature of the grout hydration reaction. As such, both the SDU concrete and the coatings need to be tested with respect to stability in the aforementioned chemical and thermal environments. Two primary investigations were considered in this work. The first was to evaluate the resistance of two previously used epoxy coatings (Hempel Versiline TL-45 S Novolac and EC-66 elastomeric epoxies) to chemical attack from a simulated salt solution. In addition, a third coating was included in the study, a poly-urea coating (Sherwin Williams Envirolastic AR425) that may be considered as an alternative to the epoxy coatings on future SDUs. Each coating was applied to concrete cylinders (actual SDU 6 test cores) and subsequently exposed to salt-stone, or full and half strength caustic salt solution; 50% dilution was considered since salt-stone processing involves addition of flush water to the SDUs, which is expected to dilute any residual salt solution or bleed water in the SDU. Exposure testing was conducted at 68 deg. C for 1,000 hours followed by ambient exposure to provide a full exposure time of approximately 90 days. It is important to note that evaluation criteria for the coated materials were only visual in nature. Other than coating discoloration, which was limited to the surfaces, no other visual indications of reactivity between the three coatings and any of the exposure mediums were observed. Cross-sectioned samples indicated no through-thickness coating penetration or reaction, and showed no signs of delamination. The second investigation was also performed to determine if SDU concrete without a polymeric barrier would resist ingress and reaction with salt solution at the elevated temperature. Again, only slight discoloration of the concrete surfaces was observed after the 90-day exposure test irrespective of the salt solution concentration. A requirement of structural concrete in the SDUs is that it possesses a minimum compressive strength of 42 MPa (6,000 psi). The average compressive strength of samples exposed to the full-strength salt solution was recorded at 68 MPa compared to 66 MPa for the unexposed samples thus indicating that the exposure conditions considered in this study were not detrimental to the concrete strength. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Using Conductive Firebrick Resistance Heating to Enable Very High-Temperature Heat Storage in Nuclear Gas Turbine Systems

In order to economically deploy renewable energy on large scales, affordable energy storage is a must. While the cost of current work storage technologies are too high to deploy in quantities that satisfy renewable energy deployment, heat storage options hold promise for dramatically cheaper storage, which can be used to (1) couple with industrial furnaces or refineries to provide high temperature heat to industry, or (2) couple with air-Brayton cycles to add heat for electricity production. The design space and preliminary performance evaluation for an affordable heat storage concept, called Firebrick Resistance-heated Energy Storage (FIRES), has shown promise for near-term deployment in industrial processes by using readily available materials: metallic resistance heaters for converting electricity to stored heat, and common ceramic firebricks used in furnaces for storing heat at temperatures as high as 1200 deg. C. There however remains serious interest in replacing traditional resistance heaters with electrically conductive firebricks that may serve as both the heating element and the storage medium. The work underway is the experimental development of a high-temperature low-cost electric resistance heater system using conductive firebrick, with the aims of (1) proving that conductive firebrick can be used to replace separate electrical heating system to reduce costs, increase operating temperatures, and increase reliability, and (2) developing methodology to enable design and prediction of performance of such systems.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Data Acquisition System Selection and Calibration of Resistive Moisture Content Measurements for Large-Scale Field Studies in Cold Climate Residential Building Envelope Performance

The residential building stock built before the energy codes were enforced has several significant inefficiency problems in terms of insulation and air leakage. To decrease these inefficiencies, building retrofits are necessary. However, if the envelope is not appropriately designed, excessive accumulation of moisture content and thus mold formation and decay inside the envelope layers can be a vital problem. This risk becomes higher, especially in extreme climate conditions such as cold winters and hot and humid summers as in some northern regions of the U.S. Field studies are essential to test the long-term hygrothermal performance of building envelopes. Although in-situ temperature, RH, and heat flux measurements are straightforward, moisture content measurements are cumbersome. Mainly, because of the heterogeneous nature of the wood materials, deviations and nonuniformities within the materials are unavoidable. Resistance measurements are one of the oldest methods used to measure the moisture content of wood and other building materials. In large-scale studies, it is commonly preferred to use multi-purpose data acquisition systems (DAQ) and custom-made or prefabricated moisture pins to measure the electrical resistance (and thus moisture content) of critical building materials. These multi-purpose DAQ systems generally provide lower costs and offer more flexibility. However, these systems require calibration and fine-tuning to achieve accurate moisture content measurements. A large-scale, two-year-long field study was conducted in northern Minnesota to monitor the hygrothermal performance of residential retrofit wall systems in cold climates. Two base case walls and sixteen different wall treatments were tested. Moisture contents were measured at various layers in each wall treatment using 85 sets of moisture pins. This paper focuses on the overall approach, fabrication, and calibration methodology for the combination of custom-made moisture pins and a multi-purpose DAQ. The aim is to directly use the low-excitation multi-purpose DAQ without any extra voltage regulator. A half-bridge circuit is used to measure wood resistance with 4V excitation voltage and 100 kΩ and 500 kΩ reference resistors. The system is calibrated for four different materials: Douglas fir, lodgepole pine, western red cedar, and oriented strand board (OSB). Calibration experiments were done under controlled conditions in 50% and 65% RH test chambers. Resistance-based moisture content calibration curves are obtained for each species. Results show that higher reference resistors provided better calibration curves for lower excitation voltages.

Desjarlais, Andre Omer↗

Corrosion-resistant metal surfaces

The present invention relates to metal surfaces having thereon an ultrathin (e.g., less than ten nanometer thickness) corrosion-resistant film, thereby rendering the metal surfaces corrosion-resistant. The corrosion-resistant film includes an at least partially crosslinked amido-functionalized silanol component in combination with rare-earth metal oxide nanoparticles. The invention also relates to methods for producing such corrosion-resistant films.

36 MATERIALS SCIENCE↗

Significant enhancement of the strength-to-resistivity ratio by using nanotwins in epitaxial Cu films

Epitaxial nanotwinned Cu films, with an average twin spacing ranging from 7 to 16 nm, exhibit a high ratio of strength-to-electrical resisitivity, -400 MPa({mu}{Omega}cm){sup -1}. The hardness of these Cu films approaches 2.8 GPa, and their electrical resistivities are comparable to that of oxygen-free high-conductivity Cu. Compared to high-angle grain boundaries, coherent twin interfaces possess inherently high resistance to the transmission of single dislocations, and yet an order of magnitude lower electron scattering coefficient, determined to be 1.5-5 x 10{sup -7} {mu}{Omega}cm{sup 2} at room temperature. Analytical studies as well as experimental results show that, in polycrystalline Cu, grain refinement leads to a maximum of the strength-to-resistivity ratio, -250 MPa({mu}{Omega}cm){sup -1}, when grain size is comparable to the mean-free path of electrons. However, in twinned Cu, such a ratio increases continuously with decreasing twin spacing down to a few nanometers. Hence nanoscale growth twins are more effective to achieve a higher strength-to-resistivity ratio than high-angle grain boundaries.

36 MATERIALS SCIENCE↗

Log-T divergence and insulator-to-metal crossover in the normal state resistivity of fluorine doped AmFeAsO1-xFx

We report the resistivity of a series of fluorine-doped SmFeAsO{sub 1-x}F{sub x} polycrystalline superconductors in magnetic fields up to 60T. For underdoped samples (x < 0.15), the low-temperature resistive state is characterized by pronounced magneto-resistance and a resistive upturn at low temperatures. The 'insulating behavior' is characterized by a log-T divergence observed over a decade in temperature. In contrast, the normal state for samples with doping x > 0.15 display metallic behavior with little magnetoresistance, where intense magnetic fields broaden the superconducting transition rather than suppress T{sub c}. The location of the insulator-to-metal crossover coincides with the reported suppression of the structural phase transition (SPT) in the phase diagram for SmFeAsO{sub 1-x}F{sub x} series.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗