Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RISE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Prominence Eruption Initiated by Helical Kink Instability of an Embedded Flux Rope

We study the triggering mechanism of a limb-prominence eruption and the associated coronal mass ejection (CME) near AR 12342 using Solar Dynamics Observatory and Large Angle and Spectrometric Coronagraph/Solar Heliospheric Observatory observations. The prominence is seen with an embedded flux thread (FT) at one end and bifurcates from the middle to a different footpoint location. The morphological evolution of the FT is similar to that of an unstable flux rope (FR), which we regard as a prominence-embedded FR. The FR twist exceeds the critical value. In addition, the morphology of the prominence plasma in 304 Å images marks the helical nature of the magnetic skeleton, with a total of 2.96 turns along arc length. The potential field extrapolation model indicates that the critical height of the background magnetic field gradient falls within the inner corona (105 Mm), which is consistent with the extent of coronal plasma loops. These results suggest that the helical kink instability in the embedded FR caused the slow rise of the prominence to the height of the torus instability domain. Moreover, the differential emission measure analysis unveils heating of the prominence plasma to coronal temperatures during an eruption, suggesting reconnection-related heating underneath the upward rising embedded FR. The prominence starts with a slow rise motion of 10 km s(exp. -1), which is followed by fast and slow acceleration phases that have an average acceleration of 28.9 m s(exp. -2) and 2.4 m s(exp. -2) in C2 and C3 field of view, respectively. As predicted by previous numerical simulations, the observed synchronous kinematic profiles of the CME leading edge and the core support the involved FR instability in the prominence initiation.

Vemareddy, P.↗

Projections of Future Sea Level Contributions from the Greenland and Antarctic Ice Sheets: Challenges Beyond Dynamical Ice Sheet Modeling

As Earth's climate warms, rising sea levels are becoming a great concern. Providing substantiated and well-informed guidance on the amount and rate of future sea level rise is important, but remains challenging. Observations of the Greenland and Antarctic Ice Sheets-Earth's largest freshwater reservoirs-reveal their ongoing, rapid, and complex changes in response to an evolving climate. The improved understanding of ice sheet behavior resulting from observations is driving the development of ice sheet models, and is allowing better simulation of past, present, and future ice sheet evolution. However, insight into future changes requires a better understanding of how ice sheets interact with other components of the Earth system and associated feedbacks. As climate models start to include dynamical ice sheet components, our understanding of such interactions and the feedback mechanisms will advance. These new developments in ice sheet modeling and their implementation in climate models are timely, as observations indicate an accelerating contribution of ice sheets to sea level rise.

ice sheet model↗

New York City Panel on Climate Change 2019 Report Chapter 5: Mapping Climate Risk

The mapping work of the NPCC is focused on illustrating spatial climate risk information to inform policy makers, stakeholders, and the public of the distribution of climate risk across the landscape of New York City. Flood risk, overall, has been the primary focus of climate risk, based on a variety of approaches including global climate models, semiempirical studies, literature surveys, expert opinion, and historic tide gauge and more recently, satellite observations of sea level rise. Maps of potential future flood extents are used to visualize coastal flooding extents at the neighborhood scale and to assess the progression of citywide flood risk throughout the 21st century. The NPCC maps were developed as a tool to illustrate our present understanding of the potential futures for which we need to prepare. This chapter reviews the background, methodology, and limitations of the NPCC3 (and NPCC2) mapping approach and features new citywide maps of mean sea level rise, monthly tidal flooding, and 100year return period flooding under a high end scenario of sea level rise. It concludes with a discussion of future mapping efforts and next steps that the NPCC could consider.

Patrick, Lesley↗

Nineteenth‐Century Tides in the Gulf of Maine and Implications for Secular Trends

Since the early twentieth century, the amplitudes of tidal constituents in the Gulf of Maine and Bay of Fundy display clear secular trends that are among the largest anywhere observed for a regional body of water. The M2 amplitude at Eastport, Maine, increased at a rate of 14.1 ± 1.2 cm per century until it temporarily dropped during 1980–1990, apparently in response to changes in the wider North Atlantic. Annual tidal analyses indicate M2 reached an all‐time high amplitude last year (2018). Here we report new estimates of tides derived from nineteenth century water‐level measurements found in the U.S. National Archives. Results from Eastport, Portland, and Pulpit Harbor (tied to Bar Harbor) do not follow the twentieth century trends and indicate that the Gulf of Maine tide changes commenced sometime in the late nineteenth or early twentieth centuries, coincident with a transition to modern rates of sea‐level rise as observed at Boston and Portland. General agreement is that sea level rise alone is insufficient to cause the twentieth‐century tide changes. A role for ocean stratification is suggested by the long‐term warming of Gulf of Maine waters; archival water temperatures at Boston, Portland, and Eastport show increases of ∼2 °C since the 1880s. In addition, a changing seasonal dependence in M2 amplitudes is reflected in a changing seasonal dependence in water temperatures. The observations suggest that models seeking to reproduce Gulf of Maine tides must consider both sea level rise and long‐term changes in stratification.

Ray, R. D.↗

TPSAS-NF1676L-34012-DND

Earth’s climate system is highly interconnected, meaning that changes to the global climate influence the United States climatically and economically. In much the same way as European and Asian financial markets affect the U.S. economy, changes to ice sheet mass and energy flows in the far reaches of the planet affect our climate. Life on Earth is sensitive to climate conditions; human society is especially susceptible due to the climate-vulnerable, complex, and often fragile systems that provide food, water, energy, and security. Observed changes to the global climate affecting the United States include rising global temperatures, diminishing sea ice, melting ice sheets and glaciers, rising sea levels, etc. These documented changes have global economic and national security implications, including for the United States. For example, sea level rise alone is putting $100 billion dollars of U.S. military assets at risk, according to the Dept. of Defense. Arctic climate change continues to outpace the rest of the globe. Over the last 30 years, rapid and, in many cases, unprecedented changes to Arctic temperatures, sea ice, snow cover, land ice, and permafrost have occurred. While the Arctic may seem far away, changes in the Arctic climate system have a global reach, affecting sea level, the carbon cycle, atmospheric winds, ocean currents, and potentially the frequency of extreme weather. This presentation discusses the changes in the observed in the Arctic, the projected changes, and the potential impacts to us living the U.S.

Patrick C Taylor↗

TPSAS-NF1676L-31944-DND

The Plum Island Estuary (PIE) in Massachusetts is New England’s largest salt marsh. This dynamic ecosystem plays an important role in the surrounding communities by providing ecosystem and social services, acting as a center for education, research, and recreation. However, marshes around the world are threatened by sea level rise. As the equilibrium between sediment supply, erosion rates, and vegetation growth is unbalanced by rising waters, marshes are liable to recede, or even drown. Because sediment is so crucial, researchers use sediment budgets as a metric to assess Plum Island Estuary’s vulnerability to rising seas; however, established data collection methods are limited in scope. The project employed five years of imagery from Landsat 8 Operational Land Imager (OLI) and three years of imagery from Sentinel-2 Multispectral Instrument (MSI), in conjunction with in situ data, to generate and refine a local algorithm that derives suspended sediment concentration from remote sensing reflectance. This information was applied to a flux model to analyze transport patterns and possible sediment sources, particularly the Merrimack River. The use of remote sensing techniques will provide our partners at the US Geological Survey, US Fish and Wildlife Service, and Plum Island Ecosystems Long Term Ecological Research Network with higher spatial and temporal resolution data, which will allow for the development of more effective management practices.

Sydney Neugebauer↗

CMIP6 Historical Simulations (1850‐2014) with GISS‐E2.1

Simulations of the CMIP6 historical period 1850‐‐2014, characterized by the emergence of anthropogenic climate drivers like greenhouse gases, are presented for different configurations of the NASA Goddard Institute for Space Studies (GISS) Earth System ModelE2.1. The GISS‐E2.1 ensembles are more sensitive to forcing than their CMIP5 predecessors (GISS‐E2), but warm less during recent decades due to reduced total forcing. This forcing reduction is attributed to an increase in longwave opacity in pre‐industrial simulations, resulting in an atmosphere less sensitive to further increases in opacity that result from rising greenhouse gas concentrations. This demonstrates the importance of the base climatology to forcing and forced climate trends. Most model versions match observed temperature trends since 1979 from the ocean to the stratosphere. The choice of ocean model is important to the transient climate response, as found in CMIP5 GISS‐E2: the model that more efficiently exports heat to the deep ocean shows a smaller rise in tropospheric temperature. Model sea level rise over the historical period is traced to excessive drawdown of aquifers to meet irrigation demand with a smaller contribution from thermal expansion. This shows how fully coupled models can provide indirect observational constraints upon forcing, in this case, constraining irrigation rates with observed sea level changes. The overall agreement of GISS‐E2.1 with observed trends is familiar from evaluation of its predecessors, as is the conclusion that these trends are almost entirely anthropogenic in origin.

NASA Goddard Institute for Space Studies (GISS) Ea↗

Flow Physics at a Large Rotor Tip Gap in a Multi-Stage Axial Compressor

The flow physics in a large rotor tip gap in a 1.5-stage axial compressor is investigated in the current study. The flow structure in the rotor tip region is complex with several dominant vortical structures of opposite rotation, resulting in inhomogeneous and highly anisotropic turbulence. Earlier measurements show that eddy viscosity is negative over large parts of the tip region and eddy viscosity varies among stress/strain components. The present study aims to understand how the complex nature of rotor tip leakage flow affects compressor performance when the tip gap size is greater than 4–5% of the rotor span, which is typical of advanced small core engines. Unsteady Reynolds-averaged Navier-Stokes (URANS) and Large Eddy Simulation (LES) techniques are applied to study flow physics in a large rotor tip gap (5.5% of rotor span) in a 1.5-stage axial compressor. Calculated flow fields from the two different approaches are compared with available measurements and examined in detail. LES calculates the pressure rise in the present compressor fairly well, while URANS with a standard two-equation turbulence closure underpredicts the pressure rise by 15-20% of the measured values. The current study shows that URANS with the current turbulence closure produces much higher all-positive eddy viscosity in the tip-gap region compared to measurements and LES. The distribution of eddy viscosity in the URANS simulation is also wrong. Consequently, the flow in the tip region is highly damped with significantly larger blockage generation, which results in the tip leakage vortex (TLV) staying closer to the blade suction side compared to the measurement. When the TLV stays closer to the blade, both flow turning and the pressure rise across the compressor are reduced compared to the measurements. It appears that this effect is amplified by a large rotor tip gap.

tip gap↗

Impacts of land use change and elevated CO2 on the interannual variations and seasonal cycles of gross primary productivity in China

Climate change, rising CO2 concentration, and land use and land cover change (LULCC) are primary driving forces for terrestrial gross primary productivity (GPP), but their impacts on the temporal changes in GPP are uncertain. In this study, the effects of the three main factors on the interannual variation (IAV) and seasonal cycle amplitude (SCA) of GPP in China were investigated using 12 terrestrial biosphere models from the Multi-scale Synthesis and Terrestrial Model Intercomparison Project. The simulated ensemble mean value of China's GPP between 1981 and 2010, driven by common climate forcing, LULCC and CO2 data, was found to be 7.4±1.8 Pg C/yr. In general, climate was the dominant control factor of the annual trends, IAV and seasonality of China's GPP. The overall rising CO2 led to enhanced plant photosynthesis, thus increasing annual mean and IAV of China's total GPP, especially in northeastern and southern China, where vegetation is dense. LULCC decreased the IAV of China's total GPP by ∼7 %, whereas rising CO2 induced an increase of 8 %. Compared to climate change and elevated CO2, LULCC showed less contributions to GPP's temporal variation, and its impact acted locally, mainly in southwestern China. Furthermore, this study also examined subregional contributions to the temporal changes in China's total GPP. Southern and southeastern China showed higher contributions to China's annual GPP, whereas southwestern and central parts of China explained larger fractions of the IAV in China's GPP.

land use change↗

Impact of Handling Qualities on Motor Sizing for Multirotor Aircraft with Urban Air Mobility Missions

Control models of three NASA Urban Air Mobility (UAM) reference vehicles (the quadrotor, octocopter, and Lift+Cruise (LPC)) were created and compared to determine the effect of rotor number and disk loading on control margin and design. The heave and yaw axes demand more actuator usage than the roll and pitch axes. Between heave and yaw, heave was the more demanding of the two because of the dependence of heave on the engine speed controller (ESC). When the feedback gains for all three vehicles were optimized to Level 1 handling qualities (HQs) specifications using CONDUIT, the ESC for the octocopter was the most stable and had the highest rise time (time for the rotor to respond to an input), while the LPC ESC was the least stable and had the smallest rise time. Rise time corresponds to the time required for rotor response. When actuator usage was translated to current margin, torque margin, and power margin, heave was the most demanding axis, followed by yaw, roll, and then pitch for all three vehicles. The results emphasize the importance of an accurate motor model within the control system architecture.

Impact↗

On the Loading Rate Dependence of Environment-assisted Cracking in Sensitized AA5456-H116 Exposed to Marine Environments

The influence of the applied loading rate (dK/dt) on the environment-assisted cracking (EAC) behavior of sensitized AA5456-H116 in 0.6 M NaCl at applied potentials ranging from −800 to −900 mV_SCE is assessed via a rising-K testing framework. The applied potential strongly affects the dK/dt-dependence of EAC with results suggesting a minimal influence for potentials more positive than −830 mVSCE and a stronger dK/dt-dependence for potentials more negative than −830 mV_SCE. Crack growth rates measured using rising versus static K testing are compared, which demonstrates that rising K methods consistently yield conservative EAC metrics with increased efficiency.

Al-Mg↗

Atacama Cosmology Telescope: Detection of Millimeter-Wave Transient Sources

We report on the serendipitous discovery of three transient millimeter-wave sources using data from the Atacama Cosmology Telescope. The first, detected at R.A. = 273.8138, decl. = −49.4628 at ∼50σ total, brightened from less than 5 mJy to at least 1100 mJy at 150 GHz with an unknown rise time shorter than 13 days, during which the increase from 250 mJy to 1100 mJy took only 8 minutes. Maximum flux was observed on 2019 November 8. The source's spectral index in flux between 90–150 GHz was positive, α = 1.5 ± 0.2. The second, detected at R.A. = 105.1584, decl. = −11.2434 at ∼20σ total, brightened from less than 20 mJy to at least 300 mJy at 150 GHz with an unknown rise time shorter than 8 days. Maximum flux was observed on 2019 December 15. Its spectral index was also positive, α = 1.8 ± 0.2. The third, detected at R.A. = 301.9952, decl. = 16.1652 at ∼40σ total, brightened from less than 8 mJy to at least 300 mJy at 150 GHz over a day or less but decayed over a few days. Maximum flux was observed on 2018 September 11. Its spectrum was approximately flat, with a spectral index of α = −0.2 ± 0.1. None of the sources were polarized to the limits of these measurements. The two rising-spectrum sources are coincident in position with M and K stars, while the third is coincident with a G star.

Time domain astronomy↗

Plasmoids, Flows, and Jets During Magnetic Reconnection in a Failed Filament Eruption

We report a detailed analysis of a flare/failed eruption in Active Region 12018 on April 3, 2014, using observations from SDO/AIA, IRIS, STEREO and Hinode/SOT. Initially, we observed multiple jets originating from the cusp of a large coronal bright point (null-point topology) 1-2 hours prior to the slow rise of a filament. The subsequent filament eruption, which was outside the IRIS field of view, was accompanied by a flare but remained confined. Multiple blobs were observed, most likely formed in a breakout current sheet near the cusp during the filament slow rise. During the explosive flare reconnection phase, plasmoids also appeared and moved bidirectionally (speed=100-285 km/s, periodicity~70 s) in the flare current sheet below the erupting filament. The tiny jet-like features in the fan loops were detected during the filament slow-rise/pre-flare phase associated with slow interchange/breakout reconnection at 3D null followed by multiple plasmoids moving along the fan-loops/separatrix. We will discuss why our interpretation is more robust than the nanoflare heating/flows suggested by Antolin et al. (2021).

P. Kumar↗

Intensified Warming and Aridity Accelerate Terminal Lake Desiccation in the Great Basin of the Western United States

Terminal lakes in the Great Basin (GB) of the western US host critical wildlife habitat and food for migrating birds and can be associated with serious human health and economic consequences when they desiccate. Water levels have declined dramatically in the last 100+ years due to diversion of inflows, drought and climate change. Satellite-derived environmental science data records (ESDRs) from the MODerate-resolution Imaging Spectroradiometer (MODIS) (snow cover, evapotranspiration (ET) and land surface temperature (LST)), enable a unique approach to evaluate the effects of aridification on terminal lakes and to study their individual vulnerabilities. Surface and air temperatures in the GB are rising dramatically, with a sharp rise in the rate of increase observed beginning around 2011, while the number of days of snow cover is declining especially in the western mountainous part of the GB as exemplified in Mono Basin, California. Rising temperatures coincide with fewer days of snow cover, a decrease of inflow to the lakes and greater evaporation of water from the lakes. MODIS ESDRs show strong and statistically significant increasing surface temperature (LST) in the GB, a reduction in the number of days of snow cover, and mixed results in ET. ET declined slightly in the more arid parts of the GB due to greater moisture restrictions to evaporation from extended drought, while ET increased in the more-vegetated, wetter, mountainous northeastern parts as temperatures have risen. Severe and costly ecological, human health and economic consequences are expected if the lakes continue to decline as predicted.

land surface temperature↗

An Evaluation of A Physics-Based Firn Model and A Semi-Empirical Firn Model Across the Greenland Ice Sheet (1980–2020)

The Greenland Ice Sheet's (GrIS) firn layer buffers the ice sheet's contribution to sea level rise by storing meltwater in its pore space. However, available pore space and meltwater retention capability is lost due to ablation of the firn layer and refreezing of meltwater as near-surface ice slabs in the firn. Understanding how firn properties respond to climate is important for constraining the GrIS's future contribution to sea level rise in a warming climate. Observations of firn density provide detailed information about firn properties, but they are spatially and temporally limited. Here we use two firn models, the physics-based SNOWPACK model and the Community Firn Model configured with a semi-empirical densification equation (CFM-GSFC), to quantify firn properties across the GrIS from 1980 through 2020. We use an identical forcing (Modern-Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2) atmospheric reanalysis) for SNOWPACK and the CFM-GSFC in order to isolate firn model differences. To evaluate the models, we compare simulated firn properties, including firn air content (FAC), to measurements from the Surface Mass Balance and Snow on Sea Ice Working Group (SUMup) dataset of snow and firn density. Both models perform well (mean absolute percentage errors of 14 % in SNOWPACK and 16 % in the CFM-GSFC), though their performance is hindered by the spatial resolution of the atmospheric forcing. In the ice-sheet-wide simulations, the 1980–1995 average spatially integrated FAC (i.e., air volume in the firn) for the upper 100 m is 34 645 km 3 from SNOWPACK and 28 581 km 3 from the CFM-GSFC. The discrepancy in the magnitude of the modeled FAC stems from differences in densification with depth and variations in the sensitivity of the models to atmospheric forcing. In more recent years (2005–2020), both models simulate substantial depletion of pore space. During this period, the spatially integrated FAC across the entire GrIS decreases by 3.2 % (−66.6 km 3 yr −1 ) in SNOWPACK and 1.5 % (−17.4 km 3 yr −1 ) in the CFM-GSFC. These differing magnitudes demonstrate how model differences propagate throughout the FAC record. Over the full modeled record (1980–2020), SNOWPACK simulates a loss of pore space equivalent to 3 mm of sea level rise buffering, while the CFM-GSFC simulates a loss of 1 mm. The greatest depletion in FAC is along the margins and especially along the western margin where observations and models show the formation of near-surface, low-permeability ice slabs that may inhibit meltwater storage.

Megan Thompson-Munson↗

The Nature of Quaternary Climate Change

Dynamic interactions between atmosphere, hydrosphere, lithosphere, and biosphere, driven by solar energy and modulated by atmospheric greenhouse gasses, volcanism, and plate tectonics produce substantial variations in Earth's climate over geologic time. Major Quaternary drivers of climate change include variations in Earth's orbital cycles, global temperature, natural atmospheric greenhouse gasses, and continental ice mass. Multiple abrupt climate perturbations with onsets of a century to decades have also occurred. Since the 1970s, geologically unprecedented rising levels of anthropogenic greenhouse gasses from fossil fuel combustion, industry, and agriculture have become the dominant contributors to rising global temperature, glacier and ice sheet losses, and sea level rise.

Solar variability↗

Acoustics and Performance of a Scaled Spacecraft Cabin Ventilation Fan

An axial fan was designed at NASA Glenn Research Center using tools developed for aircraft turbine engines. The fan unit design size, flow rate and pressure rise were chosen to be broadly in the range of the Orion cabin fan. A ground test prototype was built and tested, confirming design predictions. Pressure rise and flow rate measurements were conducted over a range of fan speeds while in-duct and radiated acoustic measurements were collected. Unsteady flow measurements were acquired between the rotor and stator. These methods are a hybrid of the techniques used for small fans and those used for aircraft engine component tests. A larger version of the fan was recently designed, based on the original fan, using aerodynamic scaling laws resulting in a design with approximately twice the flow rate and twice the pressure-rise compared to the original fan. The mechanical structure was optimized using generative design for low weight. The paper discusses this larger fan design including the scaling laws, the predicted performance and acoustics.

ventilation↗

AC and DC Fault Management for Megawatt Electrified Aircraft Electrical Powertrains - Task 2: Power Quality Filtering Using Nanocrystalline Soft Magnetic Inductor

The NASA RTAPS program on AC and DC Fault Management for Megawatt Electrified Power Train is a multi-year joint project with Pratt & Whitney (P&W), Collins Aerospace (CA), and RTX Technology Research Center (RTRC). This research program focuses on the high-voltage distribution issues that present a significant technological obstacle in the adoption of Electrified Aviation Propulsion (EAP) systems. One challenge to the adoption of high-voltage distribution systems with power electronic converters is the need for filter elements to limit the generation and propagation of noise, protect the cable systems from premature aging and prevent against excessive heating within subcomponents due to high-frequency induced currents. While increased distribution voltages aide in reducing the cable mass for a fixed power system, the associated mass with the filtering elements for power electronic converter can grow with increasing distribution voltages – thereby mitigating any benefit associated with increasing the distribution system voltage. To enable high-voltage distribution systems with high system specific power densities, new magnetic materials must be developed. Therefore, the second task of the NASA RTAPS program is associated with the design and application of advanced soft magnetic components for Megawatt class electric propulsion systems, specifically the motor drive system. This report covers the collaborative work between NASA Glenn Research Center (GRC), RTRC, P&W and CA in the development of three types of magnetic components over the span of the three-year program. These critical magnetic components are the DC side EMI filter, which limits the propagation of harmful electromagnetic noise to the rise of the distribution system, and the AC side damping with the dv/dt filter, which limits the fast rise time of the power electronic converter output voltage to limit the degradation on the cable/motor insulation systems. Each of these components are investigated from component level design and are optimized at the system level with a combined modelling and testing effort. In the final experimental evaluation of the NASA developed soft magnetic material with a dv/dt filter, a commercial-off-the-shelf (COTS) magnetic core and the GRC magnetic core are optimized and loaded at 320Arms to evaluate their difference in performance. After a run time of 30 minutes in a MW-class motor driver at RTRC, the NASA GRC cores were found to not only offer a lower temperature rise of nearly 25°𝐶, but also a reduction in measured core loss of 25% (12.75W to 9.5W).

Elecrified Aircraft Propulsion↗