Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIOACTIVE MATERIAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Adsorption geometry, molecular interaction, and charge transfer of triphenylamine-based dye on rutile TiO{sub 2}(110)

The fast development of new organic sensitizers leads to the need for a better understanding of the complexity and significance of their adsorption processes on TiO{sub 2} surfaces. We have investigated a prototype of the triphenylamine-cyanoacrylic acid (donor-acceptor) on rutile TiO{sub 2} (110) surface with special attention on the monolayer region. This molecule belongs to the type of dye, some of which so far has delivered the record efficiency of 10%-10.3% for pure organic sensitizers [W. Zeng, Y. Cao, Y. Bai, Y. Wang, Y. Shi, M. Zhang, F. Wang, C. Pan, and P. Wang, Chem. Mater. 22, 1915 (2010)]. The molecular configuration of this dye on the TiO{sub 2} surface was found to vary with coverage and adopt gradually an upright geometry, as determined from near edge x-ray absorption fine structure spectroscopy. Due to the molecular interaction within the increasingly dense packed layer, the molecular electronic structure changes systematically: all energy levels shift to higher binding energies, as shown by photoelectron spectroscopy. Furthermore, the investigation of charge delocalization within the molecule was carried out by means of resonant photoelectron spectroscopy. A fast delocalization ({approx}1.8 fs) occurs at the donor part while a competing process between delocalization and localization takes place at the acceptor part. This depicts the ''push-pull'' concept in donor-acceptor molecular system in time scale.

36 MATERIALS SCIENCE↗

Observation and Destruction of an Elusive Adsorbate with STM: O{sub 2}/TiO{sub 2}(110)

When a slightly defective rutile TiO{sub 2}(110) surface is exposed to O{sub 2} at elevated temperatures, the molecule dissociates at defects, filling O vacancies (V{sub O}) and creating O adatoms (O{sub ad}) on Ti{sub 5c} rows. The adsorption of molecular O{sub 2} at low temperatures has remained controversial. Low-temperature scanning tunneling microscopy of O{sub 2}, dosed on TiO{sub 2}(110) at a sample temperature of {approx_equal}100 K and imaged at 17 K, shows a molecular precursor at V{sub O} as a faint change in contrast. The adsorbed O{sub 2} easily dissociates during the STM measurements, and the formation of O{sub ad}'s at both sides of the original V{sub O} is observed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Why SRS Matters – SRNL Part 1

A video series presenting an overview of the Savannah River Site's (SRS) mission and operations. Each episode features a specific area/operation and how it contributes to help make the world safer.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The solubility of Co in TiO{sub 2} anatase and rutile and its effect on the magnetic properties

Co-doped anatase and rutile bulk-samples prepared by the sol-gel technique are found to be paramagnetic at room-temperature. Only further annealing in Ar/H{sub 2} gas results in a ferromagnetic behavior. X-ray diffraction and electron-microscope studies reveal for low doping levels <4% the formation of Co-doped rutile samples and the formation of CoTiO{sub 3} as a new phase. Co{sub 3}O{sub 4} can be detected in anatase samples with Co doping levels >=4%. The observed Co oxides are reduced by Ar/H{sub 2} to Co metal. The room-temperature ferromagnetism can therefore be traced back to a segregation of metallic Co. - Graphical abstract: Co-doped anatase and rutile bulk-samples prepared by the sol-gel technique are paramagnetic at room-temperature. Further annealing in Ar/H{sub 2} gas results in a ferromagnetic behavior. X-ray diffraction and electron-microscope (SEM, BSE) studies reveal for low doping levels <4% the formation of Co-doped rutile samples and of CoTiO{sub 3} as a new phase. Co{sub 3}O{sub 4} is found in anatase samples with Co doping levels >=4%. The observed Co oxides are reduced by Ar/H{sub 2} to Co metal. The room-temperature ferromagnetism can be traced back to a segregation of metallic Co

36 MATERIALS SCIENCE↗

[Ni(H{sub 2}O){sub 4}]{sub 3}[U(OH,H{sub 2}O)(UO{sub 2}){sub 8}O{sub 12}(OH){sub 3}], crystal structure and comparison with uranium minerals with U{sub 3}O{sub 8}-type sheets

The new U(VI) compound, [Ni(H{sub 2}O){sub 4}]{sub 3}[U(OH,H{sub 2}O)(UO{sub 2}){sub 8}O{sub 12}(OH){sub 3}], was synthesized by mild hydrothermal reaction of uranyl and nickel nitrates. The crystal-structure was solved in the P-1 space group, a=8.627(2), b=10.566(2), c=12.091(4) A and alpha=110.59(1), beta=102.96(2), gamma=105.50(1){sup o}, R=0.0539 and wR=0.0464 from 3441 unique observed reflections and 151 parameters. The structure of the title compound is built from sheets of uranium polyhedra closely related to that in beta-U{sub 3}O{sub 8}. Within the sheets [(UO{sub 2})(OH)O{sub 4}] pentagonal bipyramids share equatorial edges to form chains, which are cross-linked by [(UO{sub 2})O{sub 4}] and [UO{sub 4}(H{sub 2}O)(OH)] square bipyramids and through hydroxyl groups shared between [(UO{sub 2})(OH)O{sub 4}] pentagonal bipyramids. The sheets are pillared by sharing the apical oxygen atoms of the [(UO{sub 2})(OH)O{sub 4}] pentagonal bipyramids with the oxygen atoms of [NiO{sub 2}(H{sub 2}O){sub 4}] octahedral units. That builds a three-dimensional framework with water molecules pointing towards the channels. On heating [Ni(H{sub 2}O){sub 4}]{sub 3}[U(OH,H{sub 2}O)(UO{sub 2}){sub 8}O{sub 12}(OH){sub 3}] decomposes into NiU{sub 3}O{sub 10}. - Graphical abstract: The framework of [Ni(H{sub 2}O){sub 4}]{sub 3}[U(OH,H{sub 2}O)(UO{sub 2}){sub 8}O{sub 12}(OH){sub 3}] built from uranium polyhedra sheets pillared by Ni-centered octahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cr{sub x}Re{sub 1-x}O{sub 2} oxides with different rutile-like structures: changes in the electronic configuration and resulting physical properties

Mixed chromium-rhenium oxides, Cr{sub x}Re{sub 1-x}O{sub 2} with 0.31<=x<=0.66, have been synthesized for the first time by high-pressure high-temperature synthesis and in evacuated quartz tubes. The crystal structures of the compounds have been determined by single crystal and powder X-ray diffraction. Depending on synthesis conditions (pressure and temperature) these phases crystallize either in a tetragonal structure (P4{sub 2}/mnm) with statistical distribution of metal ions on one site (rutile-type), with cation ordering along c-axis (trirutile-type), or in a monoclinic rutile-like structure (C2/m) with ordering of Cr- and Re-cations and metallic Re-Re bonds. The 'a' parameter of the tetragonal unit cell increases with increasing Re content whereas the 'c' parameter decreases, indicating a strengthening of the Re-Re bond. The thermal stability of tetragonal Cr{sub x}Re{sub 1-x}O{sub 2} in Ar-atmosphere depends on the Re-content, decomposition is observed at 1241 K for x=0.34, but already at 966 K for x=0.5. The thermal expansion of Cr{sub x}Re{sub 1-x}O{sub 2} is anisotropic with a larger expansion coefficient in the 'c' direction. Tetragonal Cr{sub x}Re{sub 1-x}O{sub 2} with 0.31<=x<0.54 order antiferromagnetically at low temperatures with T{sub N} depending on the Cr-content x. - Graphical abstract: Antiferromagnetic rhenium oxides Cr{sub x}Re{sub 1-x}O{sub 2} with metallic type of conductivity crystallize in different rutile-like polymorphs depending on synthesis conditions. Single crystals of the tetragonal modification can be obtained by high-pressure high-temperature synthesis.

36 MATERIALS SCIENCE↗

Simulations of Sparse Static Detector Networks for City-Scale Radiological/Nuclear Detection

Sparse static detector networks in urban environments can be used in efforts to detect illicit radioactive sources, such as stolen nuclear material or radioactive "dirty bombs." We use detailed simulations to evaluate multiple configurations of detector networks and their ability to detect sources moving through a $6\times 6$ km 2 area of downtown Chicago. A detector network's probability of detecting a source increases with detector density but can also be increased with strategic node placement. Here, we show that the ability to fuse correlated data from a source-carrying vehicle passing by multiple detectors can significantly contribute to the overall detection probability. In this article, we distinguish static sensor deployments operated as networks able to correlate signals between sensors, from deployments operated as arrays where each sensor is operated individually. In particular, we show that additional visual attributes of source-carrying vehicles, such as vehicle color and make, can greatly improve the ability of a detector network to detect illicit sources.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Simultaneous {sup 233}U and{sup 235}U characterization through the assay of delayed neutron temporal behavior

Aqueous solutions containing dissolved uranium-233 and uranium-235 were irradiated for 60's in the SLOWPOKE-2 reactor at the Royal Military College of Canada. The temporal behavior of the delayed neutrons produced was recorded by the Facility's Delayed Neutron Counting (DNC) system. The percentage of uranium-233 as a function of total fissile mass present in each sample ranged from 0 to 100% and was predicted by the DNC system with average absolute errors of {+-} 4%. Future work will upgrade the system electronics and software to reduce both uncertainties in timings and electrical noise. Mixture analysis will also be expanded to include plutonium-239 and fissile materials contained in non-aqueous matrices. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Choosing the Best Modeling Platform for Radiological Risk Assessment Models - 20468

Radiological risk assessments, in the form of performance or safety assessments, are often required under regulations or guidance for remediation of contaminated land, decommissioning of contaminated buildings or structures, and radioactive waste disposal. These risk assessments are usually supported by fate and transport models that address decay and ingrowth of radionuclides, as well as their movement through engineered systems and the natural environment. These models are often projected thousands, or more, years into the future, largely because the radioactive species change through decay and ingrowth, and hence the magnitude of the radioactive effect changes with time. There are many computer codes that are available to address this type of modeling. They range from addressing specific pathways or processes such as infiltration of water, groundwater, surface water, air, biota, diffusion and advection of water and gases, to those that try to couple all processes together to evaluate the impact of fate and transport through the entire system to places in space and time to which access is assumed. These different types of codes are sometimes separated with the monikers process-level and systems-level codes, although it is often not clear that this separation does justice to the capabilities of the many codes that are available to evaluate fate and transport of radionuclides. The focus of this paper is the latter group of modeling codes. Several systems level modeling codes exist and are used. There are differences between these codes in terms of utility, flexibility, complexity and cost. The purpose of this paper is to compare a few of these codes in the context of work currently being performed by the International Atomic Energy Agency (IAEA) Modeling and Data for Radiological Impact Assessments (MODARIA) II Working Group 1 (WG1). The MODARIA II WG1's main focus is how stakeholder engaged decision analysis can, or should, be applied to radiological contamination problems so that better, longstanding, sustainable, solutions are reached. However, the WG1 also recognizes the potential impact of the modeling tools that are chosen to address radiological risk, which is often a primary objective of decision making for radiological problems. Other objectives might also be important, such as constraining costs, obtaining financing, minimizing impact on ecosystems, saving cultural resources, saving jobs, farmland, environmental justice, etc., in a full decision analysis for a given radiological contamination problem, but none of these other objectives have the same types of complex modeling needs as minimize radiological dose. Consequently, a further focus of WG1 is to evaluate the potential impacts on decision making of the choice of fate and transport, and risk assessment, modeling codes that are used to support decision making. The WG1 will produce a report at the end of 2020 that will focus on an approach to effective decision making and stakeholder engagement. The report will also consider the role that performance assessment modeling should play in the decision-making process, including the impact of the choice of modeling tools or computer codes on risk-informed decision making. Several sites around the World have been made available by Member States for these model comparisons, and several modeling tools have been considered. However, the focus of this paper is on two of the sites, one in Belgium and one in Ukraine, and on three of the tools: NORMALYSA (NORM And Legacy Site Assessment); GoldSim{sup C}, and AMBER{sup C}. The final report from this working group will also cover other modeling tools, including RESRAD, and PC-Cream{sup R}. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synthesis, structure and electrical properties of Cu{sub 3.21}Ti{sub 1.16}Nb{sub 2.63}O{sub 12} and the CuO{sub x}-TiO{sub 2}-Nb{sub 2}O{sub 5} pseudoternary phase diagram

Subsolidus phase relations in the CuO{sub x}-TiO{sub 2}-Nb{sub 2}O{sub 5} system were determined at 935 deg. C. The phase diagram contains one new phase, Cu{sub 3.21}Ti{sub 1.16}Nb{sub 2.63}O{sub 12} (CTNO) and one rutile-structured solid solution series, Ti{sub 1-3x}Cu{sub x}Nb{sub 2x}O{sub 2}: 0<x<0.2335 (35). The crystal structure of CTNO is similar to that of CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) with square planar Cu{sup 2+} but with A site vacancies and a disordered mixture of Cu{sup +}, Ti{sup 4+} and Nb{sup 5+} on the octahedral sites. It is a modest semiconductor with relative permittivity {approx}63 and displays non-Arrhenius conductivity behavior that is essentially temperature-independent at the lowest temperatures. - Graphical abstract: The CuO{sub x}-TiO{sub 2}-Nb{sub 2}O{sub 5} phase diagram was determined at 935 deg. C and contains one new phase, Cu{sub 3.21}Ti{sub 1.16}Nb{sub 2.63}O{sub 12}, pictured, a modest semiconductor with {epsilon}{sub r}{approx}63, and one rutile-structured solid solution series, Ti{sub 1-3x}Cu{sub x}Nb{sub 2x}O{sub 2}. Highlights: > Subsolidus phase relations in the CuO{sub x}-TiO{sub 2}-Nb{sub 2}O{sub 5} system were determined at 935 deg. C. > A new phase, Cu{sub 3.21}Ti{sub 1.16}Nb{sub 2.63}O{sub 12} (CTNO), was found with a CaCu{sub 3}Ti{sub 4}O{sub 12}-like crystal structure. > We discovered one rutile-structured solid solution series, Ti{sub 1-3x}Cu{sub x}Nb{sub 2x}O{sub 2}: 0<x<0.2335 (35). > CTNO has square planar Cu{sup 2+}, A site vacancies and Cu{sup +}, Ti{sup 4+} and Nb{sup 5+} disordered on octahedral sites. > CTNO is a modest semiconductor with relative permittivity {approx}63.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integration of (208) oriented epitaxial Hf-doped Bi{sub 4}Ti{sub 3}O{sub 12} with (0002) GaN using SrTiO{sub 3}/TiO{sub 2} buffer layer

Hf-doped Bi{sub 4}Ti{sub 3}O{sub 12} (BTH) ferroelectric films with excellent electrical properties were epitaxially integrated with GaN semiconductor using (111) SrTiO{sub 3} (STO)/rutile (200) TiO{sub 2} as buffer layer. The STO/TiO{sub 2} buffer layer was deposited by laser molecular beam epitaxy. The structural characteristics of the buffer layer were in situ and ex situ characterized by reflective high energy electron diffraction, x-ray diffraction (XRD), and high resolution transmission microscopy. The overlaying SrRuO{sub 3} (SRO) and BTH films were then deposited by pulsed laser deposition. XRD spectra, including theta-2theta and PHI scans, show that the (208) BTH films were epitaxially grown on GaN, and the BTH films inherit the in-plane twin-domain of STO buffer layer. Electrical measurements demonstrate that the non-c axis BTH films possess a large remnant polarization (2P{sub r}=45 muC/cm{sup 2}), excellent fatigue endurance (10.2% degradation after 1.1x10{sup 10} switching cycles), and a low leakage current density (1.94x10{sup -7} A/cm{sup 2} at an electric field of 200 kV/cm). These results reveal that the (208) BTH films with favorable electrical performance could be epitaxially grown on GaN template using STO/TiO{sub 2} buffer layer.

36 MATERIALS SCIENCE↗

Dielectric properties of some MM'O{sub 4} and MTiM'O{sub 6} (M=Cr, Fe, Ga; M'=Nb, Ta, Sb) rutile-type oxides

We describe an investigation of the structure and dielectric properties of MM'O{sub 4} and MTiM'O{sub 6} rutile-type oxides for M=Cr, Fe, Ga and M'=Nb, Ta and Sb. All the oxides adopt a disordered rutile structure (P4{sub 2}/mnm) at ambient temperature. A partial ordered trirutile-type structure is confirmed for FeTaO{sub 4} from the low temperature (17 K) neutron diffraction studies. While both the MM'O{sub 4} oxides (CrTaO{sub 4} and FeTaO{sub 4}) investigated show a normal dielectric property MTiM'O{sub 6} oxides for M=Fe, Cr and M'=Nb/Ta/Sb display a distinct relaxor/relaxor-like response. Significantly the corresponding gallium analogs, GaTiNbO{sub 6} and GaTiTaO{sub 6}, do not show a relaxor response at T<500 K. - Graphical abstract: Dielectric response of FeTiNbO{sub 6}.

36 MATERIALS SCIENCE↗

Intrinsic magnetism in Fe doped SnO{sub 2} nanoparticles

Iron doped semiconducting nanoparticles Sn{sub 1-x}Fe{sub x}O{sub 2} with x=0, 0.001, 0.002, 0.003, 0.004, 0.01 and 0.03 were prepared by a sol-gel method. The X-ray diffraction, Transmission Electron Microscopy measurements confirm the rutile structure with no impurity phase. The three characteristic lines of electron spin resonance (ESR) are observed in the doped samples for all compositions, which is a clear evidence for rhombic Fe{sup 3+} in rutile phase. The line width of ESR increases with increase in Fe concentration due to induced disorder. The spin-pumping effect is observed at temperatures below 250 K for the samples with x=0.01 and 0.03. However, based on the Curie-Weiss susceptibility, iron is in paramagnetic state and is subject to weak antiferromagnetic interaction. Blue shift in the optical band gap is observed with increase in the Fe content. -- Graphical abstract: The ESR spectra reveal that the nature of Fe in Sn{sub 1-x}Fe{sub x}O{sub 2} samples is isolated rhombic Fe{sup 3+}-ion in rutile phase and the Fe content (x=0.01 and 0.03), an extra spin-pumping is observed below 250 K. Display Omitted Research Highlights: {yields} The g-values of the ESR spectra reveal that the isolated rhombic Fe{sup 3+} ion in rutile phase. {yields} The line width of ESR increases with increase in the Fe{sup 3+}-content due to the ion induced disorder effect. {yields} The magnetization confirms that the Fe{sup 3+}-ions have weak antiferromagnetic interactions.

36 MATERIALS SCIENCE↗

Structural, thermodynamic and optical properties of MgF{sub 2} studied from first-principles theory

A detailed theoretical study of structural, electronic, elastic, thermodynamic and optical properties of rutile type MgF{sub 2} has been carried out by means of first-principles Density Functional Theory (DFT) calculations using plane wave pseudo-potentials within the local density approximation and generalized-gradient approximation for the exchange and correlation functionals. The calculated ground state properties and elastic constants agree quite well with experimental values. From the calculated elastic constants we conclude that MgF{sub 2} is relatively hard when compared to other alkaline-earth fluorides and ductile in nature. The thermodynamic properties such as heat capacity, entropy, free energy, phonon density of states and Debye temperatures are calculated at various temperatures from the lattice dynamical data obtained through the quasi-harmonic Debye model. From free energy and entropy it is found that the system is thermodynamically stable up to 1200 K. The imaginary part of the calculated dielectric function {epsilon}{sub 2}({omega}) could reproduce the six prominent peaks which are observed in experiment. From the calculated {epsilon}({omega}), other optical properties such as refractive index, reflectivity and electron energy-loss spectrum are obtained up to the photon energy range of 30 eV. -- Graphical abstract: The calculated imaginary part {epsilon}{sub 2}({omega}) of the complex dielectric function {epsilon}({omega}) of MgF{sub 2} as a function of photon energy is shown. The calculated {epsilon}{sub 2}({omega}) could reproduce the major peaks observed in experiment. All the peaks observed are corresponds to interband transitions from 'p' states of Fluorine in valence band to the 's' states of Mg in conduction band. Display Omitted Research highlights: > Structural and bonding properties. > Optical properties. > Single and polycrystalline elastic properties. > Thermodynamic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Divacancies and the hydrogenation of Mg-Ti films with short range chemical order

We obtained evidence for the partial chemical segregation of as-deposited and hydrogenated Mg{sub 1-y}Ti{sub y} films (0<=y<=0.30) into nanoscale Ti and Mg domains using positron Doppler-broadening. We exclusively monitor the hydrogenation of Mg domains, owing to the large difference in positron affinity for Mg and Ti. The electron momentum distribution broadens significantly upon transformation to the MgH{sub 2} phase over the whole compositional range. This reveals the similarity of the metal-insulator transition for rutile and fluorite MgH{sub 2}. Positron lifetime studies show the presence of divacancies in the as-deposited and hydrogenated Mg-Ti metal films. In conjunction with the relatively large local lattice relaxations we deduce to be present in fluorite MgH{sub 2}, these may be responsible for the fast hydrogen sorption kinetics in this MgH{sub 2} phase.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Chemical model for cement-based materials: Temperature dependence of thermodynamic functions for nanocrystalline and crystalline C-S-H phases

In the context of waste confinement and, more specifically, waste from the nuclear industry, concrete is used both as a confinement and as a building material. Its exposure to high temperatures makes its geochemical behavior difficult to predict over large periods of time. The present work aims to elucidate the solubility constants, as a function of temperature, for the phases of the system CaO-SiO{sub 2}-H{sub 2}O. For the nanocrystalline phases, the present work investigates the existence of compounds of fixed composition, possibly in a metastable state. The question of whether the nanocrystalline C-S-H phases correspond to a series of phases of discrete composition or a solid solution is discussed and compared to the possible influence of impurities in the solid phases. For the crystalline phases, having established that the currently available values of thermodynamic properties were not consistent, we show that their refinement leads to a better agreement with the literature data. From the refined thermodynamic properties of crystalline C-S-H, a polyhedral decomposition model is developed. It enables to estimate the enthalpy of formation and the heat capacity of nanocrystalline C-S-H phases. Finally, verification shows that such phases remain unstable compared to the crystalline phases, at room or higher temperatures. A comparison, based on reaction enthalpies derived from experimental data indicates that predicted values for nanocrystalline C-S-H are in close agreement with experimental data. By estimating the properties of okenite and truscottite with the model developed in this study, we have been able to complete the CaO-SiO{sub 2}-H{sub 2}O phase diagram with a reasonable agreement with the literature. The case of jaffeite remains open to discussion. Finally, for the hydrate C2SH,alpha, the model predicts a transition with hillebrandite at 159 deg. C, in contradiction with the hypothesis of C2SH,alpha metastability.

36 MATERIALS SCIENCE↗

Enhancement in the photocatalytic nature of nitrogen-doped PVD-grown titanium dioxide thin films

Nitrogen-doped titanium dioxide semiconductor photocatalytic thin films have been deposited by unbalanced reactive magnetron physical vapor deposition on glass substrates for self-cleaning applications. In order to increase the photocatalytic efficiency of the titania coatings, it is important to enhance the catalysts absorption of light from the solar spectra. Bearing this fact in mind, a reduction in the titania semiconductor band-gap has been attempted by using nitrogen doping from a coreactive gas mixture of N{sub 2}:O{sub 2} during the titanium sputtering process. Rutherford backscattering spectroscopy was used in order to assess the composition of the titania thin films, whereas heavy-ion elastic recoil detection analysis granted the evaluation of the doping level of nitrogen. X-ray photoelectron spectroscopy provided valuable information about the cation-anion binding within the semiconductor lattice. The as-deposited thin films were mostly amorphous, however, after a thermal annealing in vacuum at 500 deg. C the crystalline polymorph anatase and rutile phases have been developed, yielding an enhancement in the crystallinity. Spectroscopic ellipsometry experiments enabled the determination the refractive index of the thin films as a function of the wavelength, while from the optical transmittance it was possible to estimate the semiconductor indirect band-gap of these coatings, which has been proven to decrease as the N-doping increases. The photocatalytic performance of the titania films has been characterized by the degradation rate of an organic reactive dye under UV/visible irradiation. It has been found that for a certain critical limit of 1.19 at. % of nitrogen doping in the titania anatase crystalline lattice enhances the photocatalytic behavior of the thin films and it is in accordance with the observed semiconductor band-gap narrowing to 3.18 eV. By doping the titania lattice with nitrogen, the photocatalytic activity is enhanced under both UV and visible light.

36 MATERIALS SCIENCE↗