SEARCH · Engineering Papers

Results for “Product”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Microwave-assisted catalytic gasification of mixed plastics and corn stover for low tar, hydrogen-rich syngas production

The challenge for efficient management of post-consumer plastic and biomass waste has grown over the past few decades due to their dramatic increases. In comparison to conventional gasification, microwave-assisted co-gasification of plastics and corn stover offers many benefits, including increased H 2 yield and gas components compared to unfavorable char/tar. Nonetheless, for future commercialization of the process and ease of product separation, further reduction of the undesirable tar is necessary, which can be achieved over the catalytic route. Here, in this work, we studied the catalytic effect of magnetite for microwave-assisted co-gasification of corn stover and plastic to make syngas with higher H 2 and lower tar selectivity over non-catalytic conditions. A 1:1:1 ratio of plastic-corn stover-magnetite was used to evaluate the reaction parameters such as temperature, space velocity, heating media, and catalytic cycles under gasification conditions. In comparison with the microwave non-catalytic route, a 100% increase in the total H 2 yield with 76% higher H 2 production efficiency (mmol/kWh) was achieved in the presence of the magnetite catalyst, while reducing the overall tar formation from 9% to 2%. When magnetite was reduced in situ during the reaction, it coupled with microwave and delivered oxygen radicals that cracked down plastic and corn stover intermediates generated from the synergistic effect under microwave heating. Soon after the oxygen transfer process initiated, magnetite reached its final oxidation state consisting of microwave-active Fe and Fe 3 C phases that continued coupling with microwaves along with the generated graphitic carbon to maintain the heat necessary to further reduce the generated tar and make additional gaseous products, as confirmed by XRD, Raman, and TGA analyses.

08 HYDROGEN↗

DOE OSTI2024

Life-cycle analysis of hydrogen production from water electrolyzers

The United States' focus on decarbonization has spawned interest among policymakers in deploying water electrolysis technology for clean hydrogen production. However, water electrolyzers also raise concerns regarding their substantial use of carbon-intensive materials. Here, we conduct a comprehensive life-cycle analysis (LCA) of three prominent water electrolyzer technologies to investigate the environmental implications of their manufacturing and life cycles under different energy sources. All electrolyzer technologies employing low-carbon energy (nuclear, solar, or wind) exhibit life-cycle greenhouse gas (GHG) emissions of 0.3-2.4 kg-CO 2-eq /kg-H 2 . This is significantly lower than the corresponding GHG emissions for hydrogen production via both conventional steam methane reforming and alternative autothermal reforming with carbon capture and storage (by > 50%). The well-to-gate GHG emissions of low-carbon electrolyzers (0-0.36 kg-CO 2-eq / kg-H 2 ) qualify for Tier I of the production tax credit in the U.S.' Inflation Reduction Act of 2022, indicating their suitability for producing decarbonized hydrogen under this program.

08 HYDROGEN↗

DOE OSTI2025

Cost analysis of alternative large-scale high-temperature solid oxide electrolysis hydrogen production facilities

We extend our past cost analysis of gigawatt-scale solid oxide electrolysis (SOE) facilities that produce high purity hydrogen gas from water by estimating construction and operating costs for three new alternative design cases: (1) offsite feed steam generation; (2) near-atmospheric pressure (NAP) stack; and (3) onsite electric boiler feed steam generation. Pressure effects on hydrogen electrode-(cathode-)supported SOE cell (SOEC) stack performance are estimated for the same assumed cell and stack construction and used to determine facility-wide stack capital costs for achieving a fixed H2 production at different pressures. Modular balance of plant (BOP) process equipment capital costs are estimated for each new alternative design case using our past equipment sizing, design, and cost data and scaling relationships. Furthermore, we update BOP equipment sizing and design for the NAP case using Aspen®. Vendor quotes for electric boilers are used to estimate costs for the electric boiler design case. Factory and onsite assembly and installation costs for SOEC stacks and BOP equipment are calculated using our past simplified first-principles approach. First-of-a-kind (FOAK) and N th -of-a-kind (NOAK) production maturity cost estimates are included for all results. The case with NAP stacks offers the lowest facility total capital cost (TCC, ~23% lower than base) while use of small electric boilers requires the highest TCC (~3% higher than base). H 2 production prices decrease from the base of ~$\$2.17$ /kgH 2 to ~$\$1.92$/kgH 2 for 1 GW e DC SIP facilities utilizing NAP stacks supplied by offsites steam situated in large modules and blocks for $\$0.030$/kWh e and $0.009/kWh t prices for electricity and thermal energy, respectively. We report all costs in 2021 US dollars.

Balance of plant (BOP) process equipment↗

DOE OSTI2025

A life cycle assessment of e-hydrogen production using proton-exchange membrane water electrolysis coupled with desalination in Saudi Arabia

Hydrogen, considered a crucial element in the transition towards a sustainable energy future, offers the potential to mitigate greenhouse gas (GHG) emissions and reduce reliance on fossil fuels. Here, this study explores the viability of hydrogen production using proton exchange membrane water electrolysis (PEMWE) as a key driver of decarbonization within the Vision 2030 framework in the Kingdom of Saudi Arabia. A first-of-a-kind life cycle assessment (LCA) of electrolytic hydrogen (e-hydrogen) production using PEMWE in the Kingdom is performed. As the hydrogen will be produced in a freshwater scarce region, the inclusion of water desalination processes adds an important dimension to the assessment, reflecting the local context and resource availability. Two main renewable energy scenarios are assessed: solar energy through photovoltaics (PV) and wind energy through onshore turbines. The global warming potential (GWP) results indicate a GHG emissions reduction of up to 95 % compared to the state-of-the-art steam methane reforming process if the electrolysis process is powered exclusively by renewable electricity. The scenarios powered by solar and wind energy result in 3.66 and 0.76 kg CO 2 eq/kg H 2 , respectively. The metal depletion is assessed to consider the requirement of rare materials, with a 7.19 × 10 −2 kg Cu eq/kg H 2 for the solar scenario and 2.82 × 10 −2 kg Cu eq/kg H 2 for the wind scenario. A contribution analysis reveals that the majority of emissions in both scenarios originate from the electricity used for electrolysis, with the electrolyser itself contributing minimally. The absolute impact of the water desalination process is the same in both scenarios; however, it appears more prominent in the wind-powered case due to the significantly lower overall emissions in that scenario. The findings underscore the importance of renewable energy integration and process optimization in minimizing environmental impacts and advancing the sustainability of e-hydrogen production.

08 HYDROGEN↗

DOE OSTI2021

Development of an enzyme cocktail to bioconvert untapped starch in sweet sorghum processing by-products: Part II. Application and economic potential

Demand for bioethanol and other biochemicals produced from agricultural crops has increased. Sweet sorghum has been identified as a promising bioenergy crop as it can produce starch, sugar, and fibrous biomass. During processing, starch accumulates in the juice sediments and clarification mud. And, while currently not recovered, it can be made accessible for fermentation by enzymatic hydrolysis. The enzymatic hydrolysis of starch in sweet sorghum processing streams was investigated, followed by fermentation of the resulting glucose to ethanol. The juice sediment contained sufficient starch to increase fermentable sugars by 127%, allowing a final ethanol titer of 11.1 vol%. The economics for fermentation of only dissolved sugars (Scenario 1) versus dissolved sugars and hydrolyzed starch (Scenario 2) were compared using a technoeconomic model. Fixed capital cost was found to be similar for both scenarios. For a set harvest period, Scenario 2 could produce 20% more ethanol; however, if the distillation by-product was dried and marketed as animal feed, Scenario 1 was more cost effective. A plant producing 5.6–5.7 Mkg of fuel ethanol per year had a minimum selling price of $0.67/kg of ethanol with concurrent production of animal feed and zero cost sweet sorghum processing. Finally, even with these optimistic assumptions, the estimated production cost was higher than the current wholesale price of fuel ethanol.

09 BIOMASS FUELS↗

DOE OSTI2026

Propagation method and planting density influence canopy developmental transition and biomass productivity in Miscanthus × giganteus

Understanding how establishment practices influence the mechanisms underlying Miscanthus × giganteus (miscanthus) productivity and canopy development is critical for optimizing management. Data was collected during the juvenile (2011–2013) and mature (2024) phases of a long-term field experiment established in Urbana, Illinois, to evaluate the effects of propagation method (plug propagation [PP] and rhizome propagation [RP]), planting density (1.0, 0.75, and 0.25 plants m⁻²), and nitrogen application (0 and 67 kg N ha⁻¹) on end-of-season biomass yield, tiller mass, tiller density, and tiller height. Linear regression models identified the dominant predictors of yield across stand ages and management regimes. Planting density, nitrogen (N) application, and propagation method significantly influenced early yield and canopy development. During the juvenile phase, biomass yield was driven by tiller density due to canopy expansion; in the mature phase, yield became driven by tiller mass. The PP plots produced higher tiller density than the RP plots, resulting in faster canopy closure and higher juvenile-phase yields. Rhizome-propagated (RP) plots produced lower tiller density, but individual tillers were 3.3–6.4 g tiller −1 heavier than PP tillers. After the canopy reached equilibrium, the PP and RP yields were similar because greater RP tiller mass compensated for its lower tiller density. Higher planting density resulted in greater yield and tiller density during the second year (2012), but this effect was absent from the third year (2013) onward. In the juvenile phase, N fertilization enhanced yield by 1.6–3.4 Mg ha −1 . Initiating fertilization in 2013 on unfertilized plots produced biomass similar to that in fertilized plots, suggesting yield recovery in the mature phase. These findings revealed that establishment strategies, including propagation method and planting density, influence juvenile miscanthus canopy development and productivity, transitioning from tiller-density- to mass-dominated yields, but not mature phase productivity.

09 BIOMASS FUELS↗

DOE OSTI2025

Methane pyrolysis by Joule heating for graphitic carbon and hydrogen production

The global energy transition toward sustainability requires technologies that can decarbonize energy carriers and fuels while producing valuable materials. Methane, a primary component of natural gas, is both a high-energy-density fuel and a significant greenhouse gas. This study reports an approach for methane pyrolysis utilizing Joule heating within the deposition substrate to drive the endothermic reaction. With electric current passing through a resistive porous carbon cloth, heat is generated to break C-H bonds of methane molecules. Here, the decomposition of methane as it flows through the cloth results in hydrogen production and the formation of conformally layered graphite around the carbon fibers. The effects of input power, chamber pressure, feedstock flow rate, and process duration on hydrogen and graphite production are characterized via in situ mass spectrometry and laser absorption spectroscopy, resulting in methane conversion rates up to 88%, with hydrogen and carbon yields of 82% and 72%, respectively. Material characterization verifies uniform high-quality graphite deposition, with a Raman I D /I G ratio of 0.1 and 3.38 Å d-spacing. This Joule heating method for catalyst-free methane pyrolysis offers the potential for advancing hydrogen production technology by simultaneously producing valuable materials such as solid graphite, thus enhancing the economic viability of the fuel decarbonization process.

Energy Resources↗

DOE OSTI2022

Product specific thermal degradation kinetics of bisphenol F epoxy in inert and oxidative atmospheres using evolved gas analysis–mass spectrometry

Knowledge of the degradation kinetics for polymer materials is important for understanding thermal stability. In this study, evolved gas analysis–mass spectrometry and pyrolysis gas-chromatography-mass spectrometry were evaluated for the potential to deliver additional insight into thermal degradation kinetics of diglycidal ether of bisphenol F (DGEBF) epoxy thermoset under inert and oxidative atmospheres. Degradation products of selected precursor ions were evaluated for their uniqueness to the specific precursor using extracted ion thermographs. Unique mass peaks, solely attributed to a single reaction pathway of a specific product, were determined from extracted ion thermographs and used to determine both activation energy (E a ) and pre-exponential factors for the specific primary reaction pathways. These primary reaction pathways for DGEBF epoxy degradation were then evaluated in the context of transition state theory (TST) and related transition state enthalpies (ΔH ‡ ) and entropies (ΔS ‡ ) of activation to further elucidate the degradation process. It was determined under pyrolysis conditions, as suggested by the E a , the formation of bisphenol F monomer was the rate-limiting step toward the formation of xanthene and phenol. In contrast, under thermo-oxidative conditions, reactions involving oxygen containing species were identified as the rate-limiting step for all observed products based on the large negative ΔS ‡ calculated from TST. This work demonstrates a powerful combination of technique and theory that can provide new insight into the degradation of polymer materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Better management practices for environmentally sustainable production of microalgae and algal biofuels

The commercialization of biofuels produced from microalgae is in its infancy; therefore, many resource-management practices and production processes are still flexible. The purpose of this paper is to guide development of supply chains toward more environmentally sustainable practices. Furthermore, in this work, we review current and projected technologies and practices for autotrophic microalgae cultivation that promote environmental sustainability. We develop a framework that leverages these studies to propose better management practices (BMPs) for water quality and quantity, biodiversity, or greenhouse gas emissions in concert with productivity and profitability considerations. Some proposed BMPs are linked to numerical environmental targets, such as percent reductions in nutrient loadings to streams, whereas others seek to avoid thresholds leading to adverse health or ecological effects. Still others involve using the best available technologies, developed iteratively through life-cycle and techno-economic analyses. Proposed BMPs for microalgae cultivation focus on water quality and quantity, as well as improving greenhouse gas (GHG) emissions to obtain advanced biofuel designation. BMPs must allow producers to meet productivity and profitability targets, as well as environmental targets. These example BMPs characterize the state of science and engineering; thus, they will change over time.

09 BIOMASS FUELS↗

DOE OSTI2025

Techno-economics of hydrocarbon fuel production and recyclables recovery from landfill-destined municipal solid waste: AI-enhanced materials recovery facility design

Sustainable aviation fuels (SAF) production from cellulosic paper fractions of municipal solid waste (MSW) destined for landfills has strong potential to advance environmental, social, and economic sustainability across the aviation and waste sectors. This study proposes an artificial intelligence-enabled material recovery facility (AI-MRF) design to efficiently characterize, separate, process, and convert recovered paper waste from MSW into intermediate chemicals and SAF. The AI-MRF, designed to process 233,091 metric tons of MSW annually, integrates smart manufacturing technologies including AI, visual and hyperspectral imaging, multi-sensor data, and traditional sorting systems. Well-characterized and sorted cellulosic paper waste was utilized for chemical and fuel production scenarios, while clean plastics, metals, and glass were considered for recycling. Conversion of paper waste into intermediate sugars achieved a net present value (NPV) of up to $\$67$ million. For sugar-to-SAF production scenarios, the minimum fuel selling price (MFSP) was calculated at $\$6.11$ per gasoline gallon equivalent (GGE) when excluding recyclable revenue, and $\$4.03$ per GGE when halving recyclable revenue. The MFSP was further reduced to $\$1.96$ per GGE when accounting for SAF sales and recyclables. Nationally, this approach could yield about 2 billion GGE of hydrocarbon fuel annually from available MSW in the United States.

09 BIOMASS FUELS↗

DOE OSTI2022

A pilot-process for calcium hydroxide production from iron slag by low-temperature precipitation

The production of Ca(OH) 2 via thermal decomposition of limestone is an energy intensive process resulting in significant CO 2 emissions. However, if produced in a manner that obviates the need for the thermal decomposition of limestone, Ca(OH) 2 could be a “CO 2 -negative” material. Herein, we design and demonstrate the operation of a continuous, low-temperature (< 100 °C), aqueous-phase pilot-process to produce Ca(OH) 2 using calcium extracted from alkaline industrial wastes. The three-step process encompasses unit operations including: (i) calcium leaching from basic oxygen furnace BOF slag, (ii) leachate concentration by reverse osmosis (RO), and (iii) Ca(OH) 2 precipitation by temperature swing. Here this process presents several advantages compared to the traditional route. First, it advances the recycling of waste from the steel industry. Second, it operates significantly below the temperature used in conventional lime production (900 °C) as it bypasses limestone calcination, responsible for ~65% of the CO 2 emissions from the current process. Thus, the new process has a lower CO 2 footprint and enables the use of industrial waste heat. The mass and energy balances were quantified to reveal that increasing the calcium concentration of the feed solution and the precipitation temperature, decrease the energy demands of the RO step, thereby reducing the process’s overall CO 2 footprint. The pilot system operated continuously and achieved a production rate of nearly 1 kg per day of Ca(OH) 2 with a purity greater than 95 wt%. The average particle size of the precipitates depended on the residence time in the precipitation reactor, demonstrating an ability to produce size-controlled particulates. Importantly, the process achieved full water recirculation/reutilization level indicative of a low-consumable water demand. The outcomes offer new insights and understanding relevant to developing and upscaling low-CO 2 processes for cement, lime, and portlandite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Plastispheres as hotspots of microbially-driven methylmercury production in paddy soils

Microplastics (MPs) as emerging contaminants have accumulated extensively in agricultural ecosystems and are known to exert important effects on biogeochemical processes. However, how MPs in paddy soils influence the conversion of mercury (Hg) to neurotoxic methylmercury (MeHg) remains poorly understood. Here, in this study, we evaluated the effects of MPs on Hg methylation and associated microbial communities in microcosms using two typical paddy soils in China (i.e., yellow and red soils). Results showed that the addition of MPs significantly increased MeHg production in both soils, which could be related to higher Hg methylation potential in the plastisphere than in the bulk soil. We found significant divergences in the community composition of Hg methylators between the plastisphere and the bulk soil. In addition, the plastisphere had higher proportions of Geobacterales in the yellow soil and Methanomicrobia in the red soil compared with the bulk soil, respectively; and plastisphere also had more densely connected microbial groups between non-Hg methylators and Hg methylators. These microbiota in the plastisphere are different from those in the bulk soil, which could partially account for their distinct MeHg production ability. Our findings suggest plastisphere as a unique biotope for MeHg production and provide new insights into the environment risks of MP accumulation in agricultural soils.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

On the product phases and the reaction kinetics of carbothermic reduction of UO 2 +C at relatively low temperatures

The synthesis of UC using carbothermic reduction of UO 2 and C mixtures has been well studied at high temperatures. However, the product phase behavior of carbothermic reduction at low temperatures (≤1773 K) is not well studied. Such a study is important as low temperatures permit single phase UC synthesis without forming secondary higher carbides, and it further supports the knowledge base of the process that needs to be used for transuranic elements such as plutonium that have high vapor pressures at elevated temperatures. Therefore, a low temperature carbothermic reduction of two different C/UO 2 molar ratios under inert and reducing environments have been studied here. Two different sample holding crucibles, alumina (Al 2 O 3 ) and graphite, were also used here to differentiate the hypostoichiometric (UC 1-a ) and oxygen dissolved (UC 1-x O x ) uranium monocarbide phases adding more details on the two systems. Also, the reaction kinetics involved in the formation of UC via the carbothermic reduction of UO 2 +C using product phases instead of evolved gases such as carbon monoxide is reported here. Under inert atmospheres but with significant oxygen partial pressures, the low temperature carbothermic reduction of UO 2 +C produced up to 90 wt.% UC 1-x O x type oxycarbides as was confirmed by Xray powder diffraction. Reducing Ar-4%H 2 environments at these temperatures were not successful in synthesizing UC as it reduces the amount of C required for the carbothermic reduction, leaving UC phase at a non-equilibrium state. Inert atmospheres with low or negligible oxygen partial pressures on the other hand produced near stoichiometric UC at high phase purity, especially at 1673 – 1773 K temperature range. An activation energy of 377±75 kJmol -1 was also calculated using product phase concentrations of the carbothermic reduction of UO 2 +C under these inert Ar (g) atmospheres.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Pyrolysis of high-density polyethylene: Degradation behaviors, kinetics, and product characteristics

Pyrolysis is a promising technology for converting plastic waste into valuable raw materials while offering a potential solution to the global plastic pollution crisis. In this study, the thermal pyrolysis of high-density polyethylene (HDPE) is investigated in a drop tube reactor under nearly isothermal conditions. The impact of reaction temperature and gas/volatile residence time on carbon conversion and product distribution is examined across a range of 500–900°C and 3.6–32.2s, respectively. Non-condensable gas products detected by online mass spectrometry are H 2 , CH 4 , C 2 H 4 , C 2 H 6 , C 3 H 6 , and C 3 H 8 . At elevated temperatures and prolonged residence time, H 2 yield reaches as high as 8.6 wt% of the initial HDPE mass due to intensified cracking reactions of C 2 –C 3 hydrocarbons and long-chain aliphatic compounds. Consequently, pyrolysis tars consist mainly of polycyclic aromatic hydrocarbons (PAHs) with 5–7 rings, accompanied by visible coke deposition within the reactor. HDPE decomposition to volatiles is an endothermic process and it is complete at a temperature between 492°C and 525°C, depending on the heating rate employed, from non-isothermal thermogravimetric analysis and differential scanning calorimetry (TGA-DSC) measurements. The thermal degradation of HDPE pellets follows the two-dimensional nucleation growth model for conversion levels up to 0.8 with an apparent activation energy of 259–270 kJ/mol and a pre-exponential factor of 4.83 × 10 17 –1.37 × 10 19 min -1 , determined from various isoconversional methods such as Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink, along with Criado's master plots. Further, these findings provide valuable insights into optimizing process parameters and refining reactor design for pyrolysis, which can be integrated with gasification and reforming processes to enhance hydrogen production on a larger scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Wind power production from very large offshore wind farms

In this work, we provide the first quantitative assessment of power production and wake generation from offshore wind energy lease areas along the U.S. east coast. Deploying 15-MW wind turbines, with spacing equal to the European average, yields electricity production of 116 TWh/year or 3% of current national supply. However, power production is reduced by one-third due to wakes caused by upwind wind turbines and wind farms. Under some flow conditions whole wind-farm wakes can extend up to 90 km downwind of the largest lease areas, and the frequency-weighted average area with a 5% velocity deficit is 2.6 times the footprint of the lease areas. Simulations including maritime corridors demonstrate reduction in the wake effects leading to power-efficiency gains and may offer contingent benefits. First-order scaling rules are developed that describe how “wake shadows” from large offshore wind farms scale with prevailing meteorology and wind turbine installed densities.

15 MW↗

DOE OSTI2022

Itaconic acid production is regulated by LaeA in Aspergillus pseudoterreus

The global regulator LaeA controls secondary metabolism in diverse Aspergillus species. Here we explored its role in regulation of itaconic acid production in Aspergillus pseudoterreus. To understand its role in regulating metabolism, we deleted and overexpressed laeA, and assessed the transcriptome, proteome, and secreted metabolome prior to and during initiation of phosphate limitation induced itaconic acid production. We found that secondary metabolite clusters, including the itaconic acid biosynthetic gene cluster, are regulated by laeA and that laeA is required for high yield production of itaconic acid. Overexpression of laeA improves itaconic acid yield at the expense of biomass by increasing the expression of key biosynthetic pathway enzymes and attenuating the expression of genes involved in phosphate acquisition and scavenging. Increased yield was observed in optimized conditions as well as conditions containing excess nutrients that may be present in inexpensive sugar containing feedstocks such as excess phosphate or complex nutrient sources. This suggests that global regulators of metabolism may be useful targets for engineering metabolic flux that is robust to environmental heterogeneity.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Oxidative coupling of methane (OCM) conversion into C 2 products through a CO 2 /O 2 co-transport membrane reactor

Oxidative coupling of methane (OCM), which transforms CH 4 into C 2 products (C 2 H 6 and C 2 H 4 ) with molecular O 2 as the oxidant, is one of the most studied direct methane conversions (DMCs). However, a major technical hurdle to the OCM process is to achieve high CH 4 conversion at high C 2 (C 2 H 6 and C 2 H 4 ) selectivity. One rudimentary cause for this “tradeoff” behavior is the high chemical reactivity of the products (C 2 H 6 or C 2 H 4 ), which can be re-oxidized by O 2 . To overcome this thermodynamic challenge, minimizing the oxidizing power of the oxidant and lowering the local oxygen partial pressure are keys. Here, In this work, we demonstrate a new membrane reactor that capture CO 2 /O 2 from a flue gas and uses it for OCM conversion. The results show that the co-captured CO 2 /O 2 mixture converts CH 4 into C 2 H 6 in the presence of a 2%Mn–5%Na 2 WO 4 /SiO 2 catalyst, followed by thermal cracking of C 2 H 6 into C 2 H 4 and H 2 . The presence of CO 2 decreases the local partial pressure of O 2 , thus reducing the propensity of C 2 -products re-oxidation and leading to a higher C 2 selectivity. We show that a small button-type membrane reactor can achieve 12% C 2 yield with ~57% C 2 -selectivity using a diluted CH 4 -Ar mixture as the feedstock. We expect higher C 2 yield with tubular plug-flow membrane reactors in the future. We also highlight the unique advantage of the membrane reactor in intensifying CO 2 capture from both flue gas and OCM purification process into one single step.

42 ENGINEERING↗

DOE OSTI2021

Microbial assimilation of lignin-derived aromatic compounds and conversion to value-added products

Lignin is an abundant and sustainable source of aromatic compounds that can be converted to value-added products. However, lignin is underutilized, since depolymerization produces a complex mixture of aromatic compounds that is difficult to convert to a single product. Microbial conversion of mixed aromatic substrates provides a potential solution to this conversion challenge. Recent advances have expanded the range of lignin-derived aromatic substrates that can be assimilated and demonstrated efficient conversion via central metabolism to new potential products. Here, the development of additional non-model microbial hosts and genetic tools for these hosts have accelerated engineering efforts. However, yields with real depolymerized lignin are still low, and additional work will be required to achieve viable conversion processes.

59 BASIC BIOLOGICAL SCIENCES↗