Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Probability distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Thorium Enrichment within the Procellarum KREEP Terrane: The Record in Surface Deposits and Significance for Thermal Evolution

The nearside-farside structural and compositional asymmetry of the Moon was recognized during the early days of Apollo and the suggestion was made that the migration of mantle melts to the nearside would have been favored by early Earth-Moon orbital dynamics and nonuniform planetesimal bombardment. Recent global geochemical mapping by Lunar Prospector has provided additional data, particularly in the Th distribution, that strongly supports the notion of global, preferential melt migration, which led in part to the development of the Procellarum KREEP Terrane (PKT) [2-5]. The surface distribution of Th was then reshaped by basin-forming impacts into the PKT, especially the Imbrium impact, which was the last and largest to strike in that region. The Imbrium event probably excavated material from a partially molten zone deep in the crust and delivered Th-rich ejecta Moon-wide. A fundamentally important but poorly understood aspect of the global Th distribution is the concentration of Th in the subsurface rocks of the PKT crustal section. For example, depending on what assumptions are made, the PKT crustal section, which is about 12% of the crust and only about 1.2% of the whole Moon, may contain as much as 40% of the Moon's entire Th budget. Such a distribution of Th and related heat-producing elements would have had a profound effect on melting, mixing, and the thermal evolution of the PKT and the underlying mantle. In this abstract, we examine the compositions of terra formations within the PKT and relate them to some of the Th-bearing rock types known from the Apollo samples. It appears that the existence of the PKT may be a unifying concept for a number of petrologic and geochemical observations. From the initial Lunar Prospector gamma-ray spectrometer data(-about 5 deg. resolution) and from the preliminary low-orbit data, there appears to be a number of relatively hotter "spots" within the PKT in terms of Th concentration. Some of the hotter spots correspond to intermediate-sized craters that penetrated volcanic flows and excavated Th-rich, submare material, such as Aristarchus, Aristillus, and Kepler. Other spots, however, correspond to surficial formations that constitute mainly rough topography associated with Imbrium ejecta or circum-Imbrium ring mountains and do not necessarily imply the presence of exposed KREEP basalts. The Fra Mauro Formation south of Copernicus toward the Apollo 14 site and regions of the Alpes Formation southwest of Copernicus in the vicinity of Reinhold lie within the most prominent hotspot; here them concentration is consistent with that found in the Apollo 14 soils (about 12-13 ppm) when the proportions of Fra Mauro Formation and mare basalt are considered. The area between Copernicus and Kepler and northwest of Copernicus in terra extending to the Carpathians is similarly enriched in Th. The Apennines from Eratosthenes toward the Apollo 15 site contain elevated Th concentrations, as does the northwestern quadrant of circum-Imbrium terra, especially between (but not including) La Condamine and Plato, and in the region northwest of the Jura mountains extending southward past Mairan to the Gruithuisen-Domes region. Within the main topographic rim of Imbrium, the Apennine Bench formation south of Archimedes appears to have relatively elevated Th concentration. Comparing the map of Th distribution to a digital-elevation map derived from Clementine altimetry, it appears that most of the areas richest in Th occur where the surface is elevated relative to the majority of PKT volcanic plains. Not all rough topography within the PKT has such elevated Th, however. Based on an analysis of the 5 deg. data, and using the calibration of, the mean Th concentrations for mainly volcanic-resurfaced terrain and rugged terrain are similar (about 5.5 ppm). This occurs in part because craters that penetrated mare basalt excavated Th-rich material. Even so, there appear to be extensive areas of volcanic resurfacing that have no obvious extrinsic source of Th-rich material, suggesting that the basalts, themselves, may contain as much as 5-6 ppm Th. High-FeO concentrations (18 to >20 wt%) indicate that these are not KREEP basalts but mare basalts. If so, this is surprising because most of the Apollo-sampled mare basalts have very low-Th (typically <2 ppm). A variety of Th-rich materials occur in the sample collection, particularly in the samples from the Apollo 12,14, and 15 sites. The most abundant Th-rich rock types are the mafic impact-melt breccias, which although found at all sites, are most abundant at Apollo 14, where they dominate the rock samples and make up some 40% of the rock particles in the soil. These have Th concentrations ranging up to about 30 ppm and averaging about 18 ppm. The Apollo 14 soils contain about 13 ppm Th, reflecting the high abundance of this melt-breccia component. At the nearby Apollo 12 site, the rocks consist mainly of mare basalts, and these have low-Th concentrations, mostly <1 ppm. Among the nonmare rocks, however, a few such as complex breccia 12013 contain a variety of evolved lithologies and represent potential sources of Th-rich components ranging from 17 to 50 ppm. A single fragment of KREEP basalt from the Apollo 12 soil contains about 50 ppm Th. Despite the identification of highly Th-enriched lithologic components at the Apollo 12 site, the soils there vary linearly in composition so as to extrapolate to a moderate Th KREEP-basalt component or a composition like that of the Fra Mauro formation as reflected by Apollo 14 soil (14 ppm Th at 10 wt% FeO). The nearby Lansberg Crater (39-km diameter) is a likely candidate to have delivered submare material such as buried Fra Mauro or Alpes material to the Apollo 12 site. Additional information contained in the original.

Jolliff, B. L.↗

Probabilistic and Possibilistic Analyses of the Strength of a Bonded Joint

The effects of uncertainties on the predicted strength of a single lap shear joint are examined. Probabilistic and possibilistic methods are used to account for uncertainties. A total of ten variables are assumed to be random, with normal distributions. Both Monte Carlo Simulation and the First Order Reliability Method are used to determine the probability of failure. Triangular membership functions with upper and lower bounds located at plus or minus three standard deviations are used to model uncertainty in the possibilistic analysis. The alpha cut (or vertex) method is used to evaluate the possibility of failure. Linear and geometrically nonlinear finite element analyses are used calculate the response of the joint; fracture in the adhesive and material strength failure in the strap are used to evaluate its strength. Although probabilistic and possibilistic analyses provide significantly more information than do conventional deterministic analyses, they are computationally expensive. A novel scaling approach is developed and used to substantially reduce the computational cost of the probabilistic and possibilistic analyses. The possibilistic approach for treating uncertainties appears to be viable during the conceptual and preliminary design stages when limited data are available and high accuracies are not needed. However, this viability is mixed with several cautions that are discussed herein.

Stroud, W. Jefferson↗

Confidence Level Based Approach to Total Dose Specification for Spacecraft Electronics

A confidence level based approach to total dose radiation hardness assurance is presented for spacecraft electronics. It is applicable to both ionizing and displacement damage dose. Results are compared to the traditional approach that uses radiation design margin and advantages of the new approach are discussed.

Total Dose Distributions in Space↗

Microscale Characterization of Damage Accumulation in CMCs

The developing roles of damage mechanisms in the failure response of SiC/SiC minicomposites was investigated by the characterization of microscale damage accumulation with respect to microstructure. A multi-modal approach combining spatially resolved acoustic emission (AE) with tensile testing in-SEM (scanning electron microscope) was used to simultaneously examine surface (observed in-SEM) and bulk damage (monitored via AE). Strong agreement was shown between the evolving crack density estimated by AE and in-SEM measurements. The following were observed: (i) in-plane matrix content and distribution impacted crack growth; (ii) spatially-distributed matrix cracks generated varying stress-dependent AE; and (iii) certain individual cracks became more probable failure locations due to unique combinations of damage mechanisms that drove their growth. This approach enabled characterizing potential failure determinants and suggests that early damage behavior is related to certain microstructural features (e.g. surface flaws), while subsequent damage behavior is coupled to interactions of local mechanisms evolving with stress.

ceramic matrix composites↗

Deriving Laws from Ordering Relations

It took much effort in the early days of non-Euclidean geometry to break away from the mindset that all spaces are flat and that two distinct parallel lines do not cross. Up to that point, all that was known was Euclidean geometry, and it was difficult to imagine anything else. We have suffered a similar handicap brought on by the enormous relevance of Boolean algebra to the problems of our age-logic and set theory. Previously, I demonstrated that the algebra of questions is not Boolean, but rather is described by the free distributive algebra. To get to this stage took much effort, as many obstacles-most self-placed-had to be overcome. As Boolean algebras were all I had ever known, it was almost impossible for me to imagine working with an algebra where elements do not have complements. With this realization, it became very clear that the sum and product rules of probability theory at the most basic level had absolutely nothing to do with the Boolean algebra of logical statements. Instead, a measure of degree of inclusion can be invented for many different partially ordered sets, and the sum and product rules fall out of the associativity and distributivity of the algebra. To reinforce this very important idea, this paper will go over how these constructions are made, while focusing on the underlying assumptions. I will derive the sum and product rules for a distributive lattice in general and demonstrate how this leads to probability theory on the Boolean lattice and is related to the calculus of quantum mechanical amplitudes on the partially ordered set of experimental setups. I will also discuss the rules that can be derived from modular lattices and their relevance to the cross-ratio of projective geometry.

Knuth, Kevin H.↗

Statistical analysis of mission profile parameters of civil transport airplanes

The statistical analysis of flight times as well as airplane gross weights and fuel weights of jet-powered civil transport airplanes has shown that the distributions of their frequency of occurrence per flight can be presented approximately in general form. Before, however, these results may be used during the project stage of an airplane for defining a typical mission profile (the parameters of which are assumed to occur, for example, with a probability of 50 percent), the following points have to be taken into account. Because the individual airplanes were rotated during service, the scatter between the distributions of mission profile parameters for airplanes of the same type, which were flown with similar payload, has proven to be very small. Significant deviations from the generalized distributions may occur if an operator uses one airplane preferably on one or two specific routes. Another reason for larger deviations could be that the maintenance services of the operators of the observed airplanes are not representative of other airlines. Although there are indications that this is unlikely, similar information should be obtained from other operators. Such information would improve the reliability of the data.

Buxbaum, O.↗

The XMM-Newton Extended Survey of the Taurus Molecular Cloud (XEST)

The Taurus Molecular Cloud (TMC) is the nearest large star-forming region, prototypical for the distributed mode of low-mass star formation. Pre-main sequence stars are luminous X-ray sources, probably mostly owing to magnetic energy release. Aims. The XMM-Newton Extended Survey of the Taurus Molecular Cloud (EST) presented in this paper surveys the most populated =5 square degrees of the TMC, using the XMM-Newton X-ray observatory to study the thermal structure, variability, and long-term evolution of hot plasma, to investigate the magnetic dynamo, and to search for new potential members of the association. Many targets are also studied in the optical, and high-resolution X-ray grating spectroscopy has been obtained for selected bright sources. Methods. The X-ray spectra have been coherently analyzed with two different thermal models (2-component thermal model, and a continuous emission measure distribution model). We present overall correlations with fundamental stellar parameters that were derived from the previous literature. A few detections from Chandra observations have been added. Results. The present overview paper introduces the project and provides the basic results from the X-ray analysis of all sources detected in the XEST survey. Comprehensive tables summarize the stellar properties of all targets surveyed. The survey goes deeper than previous X-ray surveys of Taurus by about an order of magnitude and for the first time systematically accesses very faint and strongly absorbed TMC objects. We find a detection rate of 85% and 98% for classical and weak-line T Tau stars (CTTS resp. WTTS), and identify about half of the surveyed protostars and brown dwarfs. Overall, 136 out of 169 surveyed stellar systems are detected. We describe an X-ray luminosity vs. mass correlation, discuss the distribution of X-ray-to-bolometric luminosity ratios, and show evidence for lower X-ray luminosities in CTTS compared to WTTS. Detailed analysis (e.g., variability, rotation-activity relations, influence of accretion on X-rays) will be discussed in a series of accompanying papers.

Guedel, M.↗

Volcanoes and volcanic provinces - Martian western hemisphere

The recognition of some Martian landforms as volcanoes is based on their morphology and geologic setting. Other structures, however, may exhibit classic identifying features to a varying or a less degree; these may be only considered provisionally as having a volcanic origin. Regional geologic mapping of the western hemisphere of Mars from Viking images has revealed many more probable volcanoes and volcanotectonic features than were recognized on Mariner 9 pictures. These abundant volcanoes have been assigned to several distinct provinces on the basis of their areal distribution. Although the Olympus-Tharsis region remains as the principle center of volcanism on Mars, four other important provinces are now also recognized: the lowland plains, Tempe Terra plateau, southern highlands (in the Phaethontis and Thaumasia quadrangles), and a probable ignimbrite province, situated along the highland-lowland boundary in Amazonis Planitia. Volcanoes in any one province vary in morphlogy, size, and age, but volcanoes in each province tend to have common characteristics that distinguish that particular group.

Scott, D. H.↗

Airborne Laser Polar Nephelometer

A polar nephelometer has been developed at NCAR to measure the angular variation of the intensity of light scattered by air molecules and particles. The system has been designed for airborne measurements using outside air ducted through a 5-cm diameter airflow tube; the sample volume is that which is common to the intersection of a collimated source beam and the detector field of view within the airflow tube. The source is a linearly polarized helium-neon laser beam. The optical system defines a collimated field-of-view (0.5deg half-angle) through a series of diaphragms located behind a I72-mm focal length objective lens. A photomultiplier tube is located immediately behind an aperture in the focal plane of the objective lens. The laser beam is mechanically chopped (on-off) at a rate of 5 Hz; a two-channel pulse counter, synchronized to the laser output, measures the photomultiplier pulse rate with the light beam both on and off. The difference in these measured pulse rates is directly proportional to the intensity of the scattered light from the volume common to the intersection of the laser beam and the detector field-of-view. Measurements can be made at scattering angles from 15deg to 165deg with reference to the direction of propagation of the light beam. Intermediate angles are obtained by selecting the angular increments desired between these extreme angles (any multiple of 0.1deg can be selected for the angular increment; 5deg is used in normal operation). Pulses provided by digital circuits control a stepping motor which sequentially rotates the detector by pre-selected angular increments. The synchronous photon-counting system automatically begins measurement of the scattered-light intensity immediately after the rotation to a new angle has been completed. The instrument has been flown on the NASA Convair 990 airborne laboratory to obtain data on the complex index of refraction of atmospheric aerosols. A particle impaction device is operated simultaneously to collect particles from the same airflow tube used to make the scattered-light measurements. A size distribution function is obtained by analysis of the particles collected by the impaction device. Calculated values of the angular variation of the scattered-light intensity are obtained by applying Mie scattering theory to the observed size distribution function and assuming different values of the complex index of refraction of the particles. The calculated values are then compared with data on the actual variation of the scattered-light intensity obtained with the polar nephelometer. The most probable value of the complex refractive index is that which provides the best fit between the experimental light scattering data and the parameters calculated from the observed size distribution function.

Grams, Gerald W.↗

Turbulence measurements in an equilibrium hypersonic boundary layer

New quantitative turbulence measurements were obtained in a constant pressure, nonadiabatic hypersonic boundary layer, including the first higher moment and probability density measurements of mass-flow and total temperature fluctuations in hypersonic flow. The mass-flow and total temperature fluctuations show that the hypersonic data do not follow the trends set by lower Mach number adiabatic results. Measured intermittency distributions indicate substantial intermittency in the viscous sublayer and in the outer flow; significant differences between the present data and incompressible results are apparent. The higher moment and probability density data show that the character of the mass-flow and total temperature fluctuation modes are significantly different across the entire boundary layer. These differences together with turbulence scale and lifetime data obtained from autocorrelation and space-time correlation measurements are also discussed.-

Owen, F. K.↗

Non-Gaussian Distributions of TOA SW Flux as Observed by MISR and CERES

The Top of Atmosphere (TOA) shortwave (SW) flux, converted from Terra Multi angle Imaging‐SpectroRadiometer (MISR) narrow band albedos, is compared with that measured from Clouds and the Earth’s Radiant Energy System (CERES). We describe the probability density function (PDF) of the monthly TOA SW flux and how the statistical third moment, skewness, can impact the quantification of the flux. The PDF of the SW flux is not normally distributed but positively skewed. In both sets of observations, the near-global (80S-80N) median value of the SW flux is ≈3 W/m 2 less than the mean value, due to the positive skewness of the distribution. The near-global mean TOA SW flux converted from MISR is about 7 W/m 2 (≈7%) less than CERES measured flux during the last two decades. Surprisingly, hemispheric asymmetry exists with TOA SW observations from Terra platform. SH reflects 3.92 W/m 2 and 1.15 W/m 2 more mean SW flux than NH, from MISR and CERES Single Scanner Footprint products, respectively. We can infer that the offsetting by morning clouds in the SH is greater than the effect of hemispheric imbalance of SW flux caused by different land masses in two hemispheres. While the characteristics of the two SW fluxes broadly agree with each other, differences in the regional PDF from two different SW fluxes are substantially different over high cloud regions and high altitude regions. Our analysis shows that some parts of the different skewness from two measurements may be attributed to the different calibration of the radiance anisotropy over high cloud scenes.

satellite measurements↗

Distribution of Causes in Selected US Aviation Accident Reports Between 1996 and 2003

This paper describes the results of an independent analysis of the probable and contributory causes of selected aviation accidents in the United States between 1996 and 2003. The purpose of the study was to assess the comparative frequency of a variety of causal factors in the reporting of these adverse events. Although our results show that more of these high consequence accidents were attributed to human error than to any other single factor, a large number of reports also mentioned wider systemic issues, including the managerial and regulatory context of aviation operations. These wider issues are more likely to appear as contributory rather than primary causes in this set of accident reports.

Holloway, C. M.↗

Evaluation of a New Cloud Droplet Activation Parameterization wtih in Situ Data from CRYSTAL-FACE and CSTRIPE

The accuracy of the 2003 prognostic, physically based aerosol activation parameterization of A. Nenes and J. H. Seinfeld (NS) with modification introduced by C. Fountoukis and A. Nenes in 2005 (modified NS) is evaluated against extensive microphysical data sets collected on board the Center for Interdisciplinary Remotely Piloted Aircraft Studies (CIRPAS) Twin Otter aircraft for cumuliform and stratiform clouds of marine and continental origin. The cumuliform cloud data were collected during NASA's Cirrus Regional Study of Tropical Anvils and Cirrus Layers-Florida Area Cirrus Experiment (CRYSTAL-FACE, Key West, Florida, July 2002), while the stratiform cloud data were gathered during Coastal Stratocumulus Imposed Perturbation Experiment (CSTRIPE, Monterey, California, July 2003). In situ data sets of aerosol size distribution, chemical composition, and updraft velocities are used as input for the NS parameterization, and the evaluation is carried out by comparing predicted cloud droplet number concentrations (CDNC) with observations. This is the first known study in which a prognostic cloud droplet activation parameterization has been evaluated against a wide range of observations. On average, predicted droplet concentration in adiabatic regions is within -20% of observations at the base of cumuliform clouds and -30% of observations at different altitudes throughout the stratiform clouds, all within experimental uncertainty. Furthermore, CDNC is well parameterized using either a single mean updraft velocity w or by weighting droplet nucleation rates with a Gaussian probability density function of w. This study suggests that for nonprecipitating warm clouds of variable microphysics, aerosol composition, and size distribution the modified NS parameterization can accurately predict cloud droplet activation and can be successfully implemented for describing the aerosol activation process in global climate models.

Meskhidze, Nicholas↗

Ni partitioning between diopside and silicate melt - A redetermination by ion microprobe and recognition of an experimental complication

The capabilities of and potential problems with ion microprobe analysis are illustrated in the determination of Ni distribution between silicate melt and diopside as a function of concentration. Samples of diopside and a melt in the albite-anorthite-diopside system were doped with Ni to levels of 5.22 and 1.08 wt % and 1060, 138, 42 and 30 ppm, and with 3 ppm of Ni-63, and characterized by both electron and ion microprobe techniques. Measurements of Ni-62 distribution by the ion probe method give a ratio of 1.87 for the ratio of count rates in the diopsides with the glass, which is slightly lower than the value of 2.05 obtained from beta-track mapping. The measurements required the secondary ion signal to be linear with concentration in the range measured, and a calibration to correct for differential secondary ion yields from different phases. It is found, however, that partition coefficients measured for Ni-58 and Ni-60 are not constant with Ni concentration, probably due to Ni migration during crystallization. The results thus show ion microprobe analyses to be feasible for simultaneous measurements of distributions of more than one element, and of elements inappropriate for beta-track mapping or electron probe analysis.

Steele, I. M.↗

Shell structure and distribution of Cloudina, a potential index fossil for the terminal Proterozoic

Cloudina-bearing biosparites and biomicrites in the lower part of the Nama Group, Namibia, contain a wide morphological diversity of shell fragments that can all be attributed to the two named species C. hartmannae and C. riemkeae. The curved to sinuous tubular shells of Cloudina were multi-layered. Each shell layer was 8 to 50 micrometers thick and in the form of a slightly flaring tube with one end open and the other closed. Growth appears to have been periodic with successive shell layers forming within older layers. Each added layer was slightly elevated from the previous layer at the proximal end and was asymmetrically placed within the older layer so that only a portion of the new shell layer was fused to the previous layer. This type of growth left a relatively large unminerialized area between the shell layers which was often partially or fully occluded by early marine cements. The thin shell layers exhibit both plastic and brittle deformation and were likely formed of a rigid CaCO3-impregnated organic-rich material. Often the shell layers are preferentially dolomitized suggesting an original mineralogy of high-magnesian calcite. Both species in the Nama Group formed thickets, or perhaps bioherms, and this sedentary and gregarious habit suggests that Cloudina was probably a filter-feeding metazoan of at least a cnidarian grade of organization. The unusual shell structure of Cloudina gives rise to a characteristic suite of taphonomic and diagenetic features that can be used to identify Cloudina-bearing deposits within the Nama Group and in other terminal Proterozoic deposits around the world. Species of Cloudina occur in limestones from Brazil, Spain, China, and Oman in sequences consistent with a latest Proterozoic age assignment. In addition, supposed lower Cambrian, pre-trilobitic, shelly fossils from northwest Mexico and the White-Inyo Mountains in California and Nevada, including Sinotubulites, Nevadatubulus, and Wyattia, are all either closely related to or con-generic with Cloudina. Hence, it is probable that these outcrops are latest Proterozoic in age, and that Cloudina or Cloudina-like organisms were widely distributed at that time. It is possible, moreover, to suggest that metazoan biomineralization occurred on a global scale by the latest Proterozoic, at the same time that evidence for complex multicellularity and locomotion in animals appears in siliciclastic "Ediacaran" rocks in the form of body and trace fossils.

NASA Program Exobiology↗

Completion of the Edward Air Force Base Statistical Guidance Wind Tool

The goal of this task was to develop a GUI using EAFB wind tower data similar to the KSC SLF peak wind tool that is already in operations at SMG. In 2004, MSFC personnel began work to replicate the KSC SLF tool using several wind towers at EAFB. They completed the analysis and QC of the data, but due to higher priority work did not start development of the GUI. MSFC personnel calculated wind climatologies and probabilities of 10-minute peak wind occurrence based on the 2-minute average wind speed for several EAFB wind towers. Once the data were QC'ed and analyzed the climatologies were calculated following the methodology outlined in Lambert (2003). The climatologies were calculated for each tower and month, and then were stratified by hour, direction (10" sectors), and direction (45" sectors)/hour. For all climatologies, MSFC calculated the mean, standard deviation and observation counts of the Zminute average and 10-minute peak wind speeds. MSFC personnel also calculated empirical and modeled probabilities of meeting or exceeding specific 10- minute peak wind speeds using PDFs. The empirical PDFs were asymmetrical and bounded on the left by the 2- minute average wind speed. They calculated the parametric PDFs by fitting the GEV distribution to the empirical distributions. Parametric PDFs were calculated in order to smooth and interpolate over variations in the observed values due to possible under-sampling of certain peak winds and to estimate probabilities associated with average winds outside the observed range. MSFC calculated the individual probabilities of meeting or exceeding specific 10- minute peak wind speeds by integrating the area under each curve. The probabilities assist SMG forecasters in assessing the shuttle FR for various Zminute average wind speeds. The A M ' obtained the processed EAFB data from Dr. Lee Bums of MSFC and reformatted them for input to Excel PivotTables, which allow users to display different values with point-click-drag techniques. The GUI was created from the PivotTables using VBA code. It is run through a macro within Excel and allows forecasters to quickly display and interpret peak wind climatology and probabilities in a fast-paced operational environment. The GUI was designed to look and operate exactly the same as the KSC SLF tool since SMG forecasters were already familiar with that product. SMG feedback was continually incorporated into the GUI ensuring the end product met their needs. The final version of the GUI along with all climatologies, PDFs, and probabilities has been delivered to SMG and will be put into operational use.

Dreher, Joseph G.↗

Ultraviolet illuminated molecular cloud boundaries: Extended (C II) 158 micrometer emission toward L1630

The construction of a large scale map of the 158 micrometer C+ line toward the L1630/Orion B molecular cloud, covering an approximately 35' by 45' area which includes the NGC 2024 H II region, zeta-Ori, the reflection nebula NGC 2023, and the Horsehead nebula, is reported. Emission in the C II line is very widespread. The line was detected at levels in excess of a few 0.0001 erg/sq cm/s/sr over almost the entire mapped region. Extended emission associated with the NGC 2024 H II region and its envelope accounts for more than half of the C II flux. Over this approximately 1.5 by 2.5 pc region, the amount of gas phase carbon in the form of C+ is comparable to the amount of carbon in CO. This result, together with the C II distribution implies that C II emission arises on the surface of clumps throughout the cloud rather than in a single layer at the H II region boundary. Away from the H II region, most of the C II emission comes from the western edge of the L1630 cloud and probably results from excitation by external OB stars. The overall extent of the C II emission is comparable to that of millimeter molecular lines but the distributions are different in detail. The difference in C II and molecular line distributions, in particular, the larger extent of the C II emission west of NGC 2024 implies large variations in the ratio of the C II and J = 1 towards 0 intensities. Models of photon dominated regions can explain the relation between C II and CO intensities only if the cloud edges and cloud interior are considered separately. A method for using C II and radio continuum emission to characterize the relationship between OB stars and photon dominated regions is proposed.

Jaffe, D. T.↗