Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Precise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

The Design and Performance of Low Cost Haptic Interfaces to Control Precision Nuclear Robotic System - 18351

Nuclear decommissioning environments are challenging and hazardous, typically involving high temperatures, pressures and extreme radiation. Robotic devices are commonly used to complete tasks within challenging environments, which would otherwise pose a risk to human health, however remotely operating robots without full three-dimensional vision is challenging, and operators of robotic systems require extensive training to enable precise navigation through three-dimensional environments using multiple two-dimensional views for feedback. This project explores the possibility of using a human arm as a master device for controlling a variety of low-cost slave robots, with the aim of reducing training times whilst providing a cheaper, more intuitive control system. Virtual Reality (VR) and haptics are used as an aid for navigation of the remote environment, whilst also providing a digital twin for the operator to enable real-time feedback from the slave robot. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Charge Symmetry Violation Quark Distributions Via Precise Measurement of p+/p- Rations in Semi-Inclusive Deep Inelastic Scattering

Charge symmetry in the nucleon parton distributions assumes the distribution of quarks in the proton is related to those in the neutron. Indirect experimental evidence constrains Charge Symmetry Violation (CSV) to be less than 9%. In Quantum Chromo-Dynamics (QCD), charge symmetry is broken by the mass difference between the up and down quarks. CSV in the valence region can be extracted from precision measurements of the cross section ratio of charged pion production in semi-inclusive deep inelastic scattering (SIDIS) from deuterium. Such measurements were proposed and carried out in experiment E12-09-002 at Jefferson Lab. The experiment was conducted in Hall C from fall 2018 to spring 2019 using the upgraded 10.6 GeV incident electron beam. In this SIDIS experiment, charged pions are detected in coincidence with scattered electrons covering the four-momentum transfer of the virtual photon Q2 from 4 to 5.5 GeV2, the Bjorken variable x for 0.35-0.65, and the fraction of energy transfer carried by the outgoing pion z from 0.4-0.7.

Jia, Shuo↗

Towards Precision Photometric Type ia Supernova Cosmology With Machine Learning

The revolutionary discovery of dark energy and accelerating cosmic expansion was made with just 42 type Ia supernovae (SNe Ia) in 1999. Since then, large synoptic surveys, e.g., Dark Energy Survey (DES), have observed thousands more SNe Ia and the upcoming Rubin Legacy Survey of Space and Time (LSST) and Roman Space Telescope promise to deliver millions in the next decade. This unprecedented data volume can produce the required precision to unambiguously test concordance cosmology which could represent a monumental shift in our understanding of dark energy and its role in cosmic history. However, extracting a pure SN Ia sample with accurate redshifts for such a large dataset will be a challenge. Specifically, spectroscopic classification will not be possible for the vast majority of discovered objects, and only ~25% will have spectroscopic redshifts. This thesis presents a series of observational and methodological studies designed to address the questions associated with this new era of photometric SN Ia cosmology. First, we present a machine learning method for photometric classification of SNe, Supernova Classification with a COnvolutional Neural Network (SCONE). Photometric classification enables SNe with no spectroscopic information to be confidently categorized, and is a critical component of current and future analysis pipelines. SCONE achieves >99% accuracy distinguishing simulated SNe Ia from non-Ia SNe, and has been integrated into DES, LSST, and Roman analysis pipelines. We also demonstrate the efficacy of SCONE on early-time photometric classification, which will be vital for optimal allocation of spectroscopic resources. We show that SCONE can distinguish between 6 SN types with 75% accuracy on the night of initial discovery, comparable to results in the literature for full-phase SNe. Next, we study current methods for estimating SN Ia redshifts and propose a machine learning alternative that uses SN photometry alone to extract redshift information. Most SNe Ia inherit redshift information from their host galaxy, but the process of matching SNe to the correct host galaxy can be challenging. We systematically analyze the impact of incorrect redshifts from host galaxy mismatch on 5 years of DES SN data, and conclude that improved host matching or redshift estimation methods can reduce our systematic errors by ~10%. In response to this finding, we present a SN photometry-only method for estimating redshifts independent of host galaxy information, Photo-zSNthesis. We show that Photo-zSNthesis redshift estimates are accurate to within 2% across the full redshift range of LSST, a first in the literature. Finally, we focus on the robustness of machine learning (ML) algorithms for real-world and scientific applications. ML models generalize poorly beyond their training set and often experience severe performance degradation when deployed on new data. We demonstrate a general method for improving robustness that achieves new state-of-the-art results on astronomical object classification, wildlife identification, and tumor detection.

79 ASTRONOMY AND ASTROPHYSICS↗

An Integrated Electrochemical Approach to the Precision Synthesis of Sustainable Catalyst Materials

There is a pressing need to replace critical materials such as platinum group elements (PGE) in applications related to energy. This work responds to the need for fundamental principles of materials design to replace these metals by addressing a gap in the understanding of how to precisely control the surface structure of nanoscale materials. Electrochemical nanomaterials synthesis, such as techniques developed in the PI’s research group, expands the toolbox of available synthetic handles to include both electrochemical and chemical parameters, providing access to control over synthetic conditions in ways that are not possible in purely chemical nanoparticle growth. However, electrochemical materials synthesis (electrodeposition) is inherently serial, limiting throughput and preventing widespread implementation. Initial efforts in the short period of this award resulted in an innovative, high throughput, parallel approach to synthetic discovery for the electrodeposition of shaped metal nanoparticles that overcomes this limitation. Looking ahead, this work establishes an important capability that will enable researchers to push boundaries in the shape control of nanoparticles composed of non-PGE such as copper, iron, nickel, or cobalt.

36 MATERIALS SCIENCE↗

Precision Measurements of the Neutron Magnetic Form Factor to High Momentum Transfer using Durand’s Method

Protons and neutrons, collectively known as nucleons, along with electrons, constitute the fundamental building blocks of the visible universe. Understanding their internal structure is crucial for addressing key scientific questions about our origin and existence. Elastic electron-nucleon scattering provides insights into the spatial distributions of charge and current within nucleons through their electromagnetic form factors. Accurate knowledge of these form factors over a broad range of Q2, the squared four-momentum transfer in the scattering process, reveals details about the nucleon's internal structure. However, high-Q2 data of the nucleon electromagnetic form factor is scarce due to the challenges associated with such measurements. This thesis reports preliminary results from high-precision measurements of the neutron magnetic form factor (GMn) to unprecedented Q2 using Durand's method, also known as the "ratio" method. Systematic errors are greatly reduced by ext

Datta, Provakar↗

Precise Measurement of the Neutron Magnetic Form Factor Using Super-BigBite Spectrometer at Jefferson Lab

The GMn experiment (E12-09-019) was conducted at Jefferson Laboratory from late 2021 into early 2022. The goal was to make high-precision measurement of the neutron’s magnetic form factor (GMn) at multiple kinematic points, including Q2 = 3.5, 4.5, 6.5, 8.5, 10, 12, 13.5, 16, and 18 (GeV/c)2. Limited data exist for GMn in the region up to about Q2 = 10 (GeV/c)2, with existing data having large systematic uncertainty. In this experiment, the ratio method was employed to reduce systematic uncertainty by measuring the ratio of neutron and proton yields. The experiment took place at Jefferson Laboratory in Hall A, where the BigBite spectrometer was used to detect the scattered electrons, while the HCal in the SuperBigbite spectrometer was used to detect both neutrons and protons. The protons were deflected slightly upwards with the use of a large-aperture dipole magnet named BigBen, allowing for enhanced particle identification. Extraction of GMn requires taking the ratio of proton and neutron yields. Analysis efforts are still currently underway to refine corrections to the data, including detector efficiencies, radiative corrections, neutron and proton mass identification, and charge exchange.

Lashley-Colthirst, Nathaniel↗

Revisiting Gauge Ambiguities for DUNE Precision

The de Forest prescription for handling off-shell initial states in the impulse approximation for lepton-nucleus scattering breaks gauge invariance. We discuss existing methods to address this problem and handle the form factor scale ambiguity. We demonstrate that the irreducible differences between the prescriptions are significant compared to the precision expected of next-generation accelerator neutrino experiments. A novel approach directly using the off-shell currents is proposed as a systematically improvable alternative.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Jefferson Lab High Precision Proton Radius Measurement Experiment: PRad

Proton is not a point-like particle; it has a finite size and an internal structure. The proton charge radius is usually measured through two different methods: using spectroscopy of hydrogen atoms, or through electron-proton (e - p) elastic scattering at low momentum transfer. In 2010, Phol et al [1] published a new measurement for proton charge radius obtained using the spectroscopy method from muonic hydrogen atoms. An ordinary hydrogen (H) atom is a bound state of an electron orbiting a proton. Likewise, a muonic hydrogen atom has a muon orbiting a proton. Since a muon has 200 times more mass than an electron, resulting in a much smaller orbiting radius, its orbit is much more sensitive to the proton charge distribution in space than the electron’s of an ordinary H-atom. Thus, the measurement from muonic hydrogen provides a 10 times more precise result than the previous methods. The radius from the muonic hydrogen measurement reported in [1] was significantly smaller than all the p

Bai, Xinzhan↗

Precision Measurement of the Neutron Magnetic Form Factor via the Ratio Method at Jefferson Lab Hall A

Protons and neutrons, collectively known as nucleons, are composed of quarks and gluons. The Sachs electromagnetic form factors encode information about the spatial distributions of charge and magnetization in the nucleon, particularly at low momentum transfer. In particular, the neutron magnetic form factor (GMn) provides crucial information about the distribution of magnetization inside the neutron and helps constrain theoretical models of nucleon structure. Quasi-elastic electron scattering from deuterium was measured up to Q^2=13.5 GeV^2 using the Super BigBite Spectrometer in Hall A at Jefferson Lab. In this work, the neutron magnetic form factor GMn was extracted at Q^2 = 3.0 GeV^2 and Q^2=4.5 GeV^2 using the Ratio Method. These results represent a subset of the full dataset collected in this experiment, which extended to significantly higher Q^2. The extracted GMn values agree with the existing global fit within approximately two standard deviations at Q^2=3.0 and show excellent agreement at Q^2=4.5. The measurements achieved systematic uncertainties of about 2% and statistical uncertainties below 0.5%, among the most precise determinations of GMn at these kinematics. These results demonstrate the robustness of the experimental technique and provide an important validation point for future extractions at higher Q^2, where data remain scarce. In addition, the GRINCH heavy gas Cherenkov detector—a key component of the experimental apparatus—was commissioned and achieved an electron detection efficiency of approximately 97%, supporting reliable particle identification. Together, the analysis presented here advances both our understanding of nucleon structure and the validation of the experimental methods and instrumentation used to access it.

Satnik, Maria [College of William and Mary, Willia↗

Accurate Dark Energy Constraints via the Precise Characterization of Galaxy Intrinsic Alignment Coupled with Shear and Redshift Interference

One of the most fundamental mysteries we face in physics is understanding what the nature of the dark energy component of our Universe is that causes the accelerated expansion of space. A powerful way to study dark energy is via weak gravitational lensing due to large-scale structure in the Universe, which we observe as tiny distortions in the shapes of very distant galaxies due to the bending of light by foreground mass. The Dark Energy Survey (DES) and Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) were designed to enable unprecedented measurements of these distortions in the shapes of galaxies to study dark energy. The intrinsic shapes of galaxies before they are distorted by weak gravitational lensing can cancel out some of the effects of lensing to obscure or bias what we infer about the nature of dark energy. This research program has led to improved image-level simulations of the Rubin Observatory LSST data. These simulations have made it possible to characterize for the first time the cosmic impact of these intrinsic shapes on biasing weak gravitational lensing calibration. This work will inform crucial improvements in methodology for studying dark energy with weak gravitational lensing at the precision promised by the the Rubin Observatory LSST over the next decade to ensure we are able to infer unbiased information about the nature of dark energy.

79 ASTRONOMY AND ASTROPHYSICS↗

Precision Kinematic Sunyaev--Zel'dovich Measurements Across Halo Mass and Redshift with DESI DR2 and ACT DR6: Part I. Luminous Red Galaxies

We present the most precise measurements of the kinetic Sunyaev-Zel'dovich (kSZ) effect around luminous red galaxies to date, detecting the signal at $18σ$ significance in both harmonic and configuration space. Our analysis cross-correlates 2.4 million spectroscopic LRGs from the Dark Energy Spectroscopic Instrument (DESI) DR2 sample with Data Release 6 (DR6) of the Atacama Cosmology Telescope (ACT). We develop a novel harmonic-space cross-correlation approach using momentum-weighted kSZ templates, yielding nearly uncorrelated bandpowers within a framework consistent with other large-scale structure analyses. By incorporating the LRG halo occupation distribution (HOD) and its uncertainty, we convert measured galaxy gas profiles into halo gas profiles and provide generalized Navarro-Frenk-White (GNFW) fitting profiles, providing empirical targets for tuning feedback efficiency in hydrodynamical simulations and for baryonic modeling in large-scale structure analyses. We find strong evidence that gas profiles do not trace dark matter, providing direct evidence for gas redistribution beyond gravitational collapse. Comparing to hydrodynamical simulations, our measurements favor feedback efficiencies exceeding those in the Battaglia profile, suggesting more efficient gas ejection in group-scale halos than previously predicted. Splitting by redshift, we detect the kSZ signal at SNR $\approx 5$--$10$ in each of four bins and find amplitude evolution consistent with the expected decline in mean halo mass at fixed comoving number density. Splitting by stellar mass, we study the scaling of kSZ amplitude with galaxy properties. Together with BGS and ELG measurements in Paper II, these results span $0.1 \lesssim z \lesssim 1.6$ across three galaxy populations, demonstrating the potential of spectroscopic kSZ to map circumgalactic gas and constrain baryonic feedback.

Qu, F. J. [KIPAC, Menlo Park; Stanford U., HEPL; S↗

Precise 2D electric field density simulations for superconducting quantum devices

Dielectric loss due to two-level systems is a limiting factor for superconducting qubit relaxation times. These losses arise mostly from nanometer-scale interfacial defect regions in superconducting devices with planar dimensions of microns to millimeters, thus making it resource intensive to accurately simulate the electric field density in these regions with traditional electromagnetic solvers. In this work, we demonstrate a fast boundary integral equation solver that allows precise simulation of electric field density in these thin regions, showing a speedup of around two orders of magnitude over traditional solvers, with relative errors around $10^{-7}$ for a ten-minute solution runtime. By computing participation ratios through Green's first identity without squaring the electric field, our approach is less susceptible to the field singularities near conductor corners. We apply this solver to a basic untrenched coplanar waveguide cross-section, showing that the common assumption of participation ratio linearity with dielectric constant holds well for some interfaces and not others; in particular, while the metal-air (MA) top and corner follow this linear relationship strongly, the MA sidewall does not. We then compare isotropic and anisotropic etching, showing that the MA sidewall and the metal-air-substrate triple junction are the most strongly affected. We are currently leveraging this solver to explore geometries that will uniquely isolate the participation ratios of the different dielectrics. Finally, we are working to combine this solver framework with a full 3D microwave solver to accurately calculate participation ratios for the thin dielectrics that are known sources of loss in superconducting qubits.

Gimbutas, Z. [NIST, Boulder] (ORCID:00000003320982↗

High-Precision Measurements of the Equation of State of Hydrocarbons at 1-10 Mbar Using Laser-Driven Shock Waves

The equation of state (EOS) of polystyrene and polypropylene were measured using laser-driven shock waves with pressures from 1 to 10 Mbar. Precision data resulting from the use of alpha-quartz as an impedance-matching (IM) standard tightly constrains the EOS of these hydrocarbons, even with the inclusion of systematic errors inherent to IM. The temperature at these high pressures was measured, which, combined with kinematic measurements, provide a complete shock EOS. Both hydrocarbons were observed to reach similar compressions and temperatures as a function of pressure. The materials were observed to transition from transparent insulators to reflecting conductors at pressures of 1 to 2 Mbar.

Barrios, M A↗

High Precision Tune and Coupling Feedback and Beam Transfer Function Measurements in RHIC

Precision measurement and control of the betatron tunes and betatron coupling in the Relativistic Heavy Ion Collider (RHIC) are required for establishing and maintaining both good operating conditions and, particularly during the ramp to high beam energies, high proton beam polarization. While the proof-of-principle for simultaneous tune and coupling feedback was successfully demonstrated earlier, routine application of these systems has only become possible recently. Following numerous modifications for improved measurement resolution and feedback control, the time required to establish full-energy beams with the betatron tunes and coupling regulated by feedback was reduced from several weeks to a few hours. A summary of these improvements, select measurements benefitting from the improved resolution and a review of system performance are the subject of this report.

43 PARTICLE ACCELERATORS↗

Method for forming precision clockplate with pivot pins

Methods are disclosed for producing a precision clockplate with rotational bearing surfaces (e.g. pivot pins). The methods comprise providing an electrically conductive blank, conventionally machining oversize features comprising bearing surfaces into the blank, optionally machining of a relief on non-bearing surfaces, providing wire accesses adjacent to bearing surfaces, threading the wire of an electrical discharge machine through the accesses and finishing the bearing surfaces by wire electrical discharge machining. The methods have been shown to produce bearing surfaces of comparable dimension and tolerances as those produced by micro-machining methods such as LIGA, at reduced cost and complexity.

42 ENGINEERING↗

Precise Measurements of Direct CP Violation, CPT Symmetry, and Other Parameters in the Neutral Kaon System

The authors present precise tests of CP and CPT symmetry based on the full dataset of K {yields} {pi}{pi} decays collected by the KTeV experiment at Fermi National Accelerator Laboratory during 1996, 1997, and 1999. this dataset contains 16 million K {yields} {pi}{sup 0}{pi}{sup 0} and 69 million K {yields} {pi}{sup +}{pi}{sup -} decays. They measure the direct CP violation parameter Re({epsilon}{prime}/{epsilon}) = (19.2 {+-} 2.1) x 10{sup -4}. They find the K{sub L}-K{sub S} mass difference {Delta}m = (5270 {+-} 12) x 10{sup 6} {h_bar}s{sup -1} and the K{sub S} lifetime {tau}{sub S} = (89.62 {+-} 0.05) x 10{sup -12} s. They also measure several parameters that test CPT invariance. They find the difference between the phase of the indirect CP violation parameter, {epsilon}, and the superweak phase, {phi}{sub {epsilon}} - {phi}{sub SW} = (0.40 {+-} 0.56){sup o}. They measure the difference of the relative phases between the CP violating and CP conserving decay amplitudes for K {yields} {pi}{sup +}{pi}{sup -} ({phi}{sub +-}) and for K {yields} {pi}{sup 0}{pi}{sup 0} ({phi}{sub 00}), {Delta}{phi} = (0.30 {+-} 0.35){sup o}. From these phase measurements, they place a limit on the mass difference between K{sup 0} and {bar K}{sup 0}, {Delta}M < 4.8 x 10{sup -19} GeV/c{sup 2} at 95% C.L. These results are consistent with those of other experiments, their own earlier measurements, and CPT symmetry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Precision Measurement of CP Violation in $D^0\to\pi^+\pi^-$ at CDF

We report a preliminary measurement of the CP violating asymmetry in D{sup 0} {yields} {pi}{sup +}{pi}{sup -} using approximately 215,000 decays reconstructed in about 5.94/fb of CDF data. We use the strong D* {+-} D{sup 0}{pi}{sup +} decay (D* tag) to identify the flavor of the charmed meson at production time and exploit CP-conserving strong c-{bar c} pair-production in p-{bar p} collisions. Higher statistic samples of Cabibbo-favored D{sup 0} {yields} K{sup -}{pi}{sup +} decays with and without D* tag are used to highly suppress systematic uncertainties due to detector effects. The result is the world's most precise measurement to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Boosting CO 2 Electrochemical Reduction with Atomically Precise Surface Modification on Gold Nanoclusters

Thiolate-protected gold nanoclusters (NCs) are promising catalytic materials for the electrochemical CO 2 reduction reaction (CO 2 RR). In this work an atomic level modification of a Au 23 NC is made by substituting two surface Au atoms with two Cd atoms, and it enhances the CO 2 RR selectivity to 90–95 % at the applied potential between -0.5 to -0.9 V, which is doubled compared to that of the undoped Au 23 . Additionally, the Cd-doped Au 19 Cd 2 exhibits the highest CO 2 RR activity (2200 mA mg -1 at -1.0 V vs. RHE) among the reported NCs. This synergetic effect between Au and Cd is remarkable. Density-functional theory calculations reveal that the exposure of a sulfur active site upon partial ligand removal provides an energetically feasible CO 2 RR pathway. The thermodynamic energy barrier for CO formation is 0.74 eV lower on Au 19 Cd 2 than on Au 23 . Here these results reveal that Cd doping can boost the CO 2 RR performance of Au NCs by modifying the surface geometry and electronic structure, which further changes the intermediate binding energy. This work offers insights into the surface doping mechanism of the CO 2 RR and bimetallic synergism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗