Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Practices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Practical applications of low, medium, and high altitude aircraft remote sensing data to land use planning

Remotely sensed data is gaining wider acceptance in land use planning activities because of several inherent advantages offered by the technology. Scope of applications have increased to meet planners broadening responsibilities and needs for more comprehensive and specific information in response to new legislative mandates. Specific data needs associated with the land use planning process are varied. To illustrate how remote sensing surveys can be designed to meet a variety of goals at several planning levels, specific examples of the use of remotely sensed data and analysis techniques in four planning oriented land use surveys are discussed. These examples illustrate the use of aerial photography at the state planning level in Maryland and county level in Jefferson Parish, Louisiana. Special applications of aerial photography are demonstrated by energy planning in San Bernardino County, California and water management planning in New Castle County, Delaware.

Drackett, K.↗
NASA NTRS1976

Landing practices of general aviation pilots in single-engine light airplanes

The methods and techniques used by a group of general aviation pilots during the landing phase of light airplane operations are documented. The results of 616 landings made by 22 pilots in 2 modern, four-place, single-engine, flight airplanes (one having a low wing and the other, a high wing) are presented. The landings were made on both a long runway (1524 m (5000 ft)) and a short runway (762 m (2500 ft)); both runways were considered typical of those used in general aviation. The results generally show that most of the approaches were fast with considerable floating during the flares and with touchdowns that were relatively flat or nose-low.

Goode, M. W.↗
NASA NTRS1975

Cardiovascular Imaging and Image Processing: Theory and Practice - 1975

Ultrasonography was examined in regard to the developmental highlights and present applicatons of cardiac ultrasound. Doppler ultrasonic techniques and the technology of miniature acoustic element arrays were reported. X-ray angiography was discussed with special considerations on quantitative three dimensional dynamic imaging of structure and function of the cardiopulmonary and circulatory systems in all regions of the body. Nuclear cardiography and scintigraphy, three--dimensional imaging of the myocardium with isotopes, and the commercialization of the echocardioscope were studied.

Harrison, Donald C.↗
NASA NTRS1976

General aviation approach and landing practices

The characteristics of air traffic patterns at uncontrolled airports and techniques used by a group of general aviation pilots in landing light airplanes are documented. The results of some 1,600 radar tracks taken at four uncontrolled airports and some 600 landings made by 22 pilots in two, four place, single engine light airplanes show that the uncontrolled traffic pattern is highly variable. The altitudes, distances, and piloting procedures utilized may affect the ability for pilots to see-and-avoid in this environment. Most landing approaches were conducted at an airspeed above recommended, resulting in significant floating during flare and touchdowns that were relatively flat and often nose-low.

Parker, L. C.↗
NASA NTRS1977

A practical Hadamard transform spectrometer for astronomical application

The mathematical properties of Hadamard matrices and their application to spectroscopy are discussed. A comparison is made between Fourier and Hadamard transform encoding in spectrometry. The spectrometer is described and its laboratory performance evaluated. The algorithm and programming of inverse transform are given. A minicomputer is used to recover the spectrum.

Tai, M. H.↗
NASA NTRS1977

Remote sensing of effects of land use practices on water quality

An intensive study was conducted to determine the utility of manual densitometry and color additive viewing of aircraft and LANDSAT transparencies for monitoring land use and land use change. The relationship between land use and selected water quality parameters was also evaluated. Six watersheds located in the Cumberland Plateau region of eastern Kentucky comprised the study area for the project. Land uses present within the study area were reclaimed surface mining and forestry. Fertilization of one of the forested watersheds also occurred during the study period.

Graves, D. H.↗
NASA NTRS1977

Life-cycle costing: Practical considerations

The history and methodology of life-cycle costing are presented and analyzed, contrasting the potential benefits of the technique with the difficulties of its application. Examples and a short survey of the literature are given.

Eisenberger, I.↗
NASA NTRS1976

Dynamic test techniques - Concepts and practices

An initial investigation of dynamic flight test analysis techniques indicated that a strict, comprehensive force-moment accounting system would be necessary. An implementation of the longitudinal force-moment accounting system provided excellent results in accounting for small lift/drag and tail deflection changes. Attention is given to gross thrust calculation, instrumentation, maneuvers, and aspects of data correlation. The results of the studies demonstrate that it is possible to generate a lift/drag model which is capable of predicting performance from nearly any maneuver.

Rawlings, K., III↗
NASA NTRS1977

A practical method for holographic interference fringe assessment

A theory concerning the problem of fringe interpretation reported by Hecht et al. (1973) is extended and a simpler semiquantitative method for the assessment of the fringes is developed. According to the new method, the fringe contrast between any two points on an object, is determined on the basis of the difference of the path-length changes at each point. The theoretical development of the method is discussed and a description of experimental results is given.

Liu, H. K.↗
NASA NTRS1977

Practical quantitative fringe interpretation in a composite mobile holographic nondestructive test system

A simplified theoretical model for the interpretation of the double-exposure holographic interference fringe loci due to the general three-dimensional displacements has been derived for the specific composite mobile holographic nondestructive test system. The model, representing a good approximation to a more tedious theoretical result, predicts that a combination of in-plane and out-of-plane displacements of the surface will produce concentric circular-shaped fringe patterns.

Liu, H.-K.↗
NASA NTRS1977

The design, analysis and application of a practical vibrational platform

The design, analysis and application of a unique vibrational platform employing flexural pivots is described. A Lagrangian equation for the slightly-damped second-order system was derived and verified experimentally. Platform frequencies from 0.7 to 20 Hz with an extremely low damping coefficient were observed. Various educational and instrumentation applications of this simple mechanical system are included.

Tcheng, P.↗
NASA NTRS1977

A practical magnetic bearing

A small compact magnetic bearing design developed and tested features a bearing capable of supporting over ten times its own weight, dimensioned 8 cm diam by 3.75 cm, with rare-earth cobalt magnets. Only 1% of the device payload figures as part of the magnetic suspension. The design is servoed in two axes and exhibits inherent stability in three more degrees of freedom, with full rotational freedom in the desired axis. Capacitive radial gap sensing allows stiff servoing of the rotation axis. Differential sensing and EM control linearize control functions. Low power drain, simple fabrication and assembly, and larger clearances than in air bearings or ball bearings are reported

Studer, P. A.↗
NASA NTRS1977

Compliance calibration of specimens used in the R-curve practice

The compliance calibrations for the compact (CS) and crack-line-wedge-loaded (CLWL) specimens have been determined by experimental measurements and by boundary-collocation analysis. The CS and CLWL specimen configurations were modeled more accurately than those used in previous analytical investigations. Polynomial expressions for the compliance at various stations along the crack line for CS and CLWL specimens are presented. The compliance calibrations for the center-crack tension (CCT) specimen have been determined theoretically by boundary-collocation and finite-element analysis. The calculated compliance values for the CCT specimen are compared with values obtained from the Irwin-Westergaard expression and from a modification to the Irwin-Westergaard expression proposed by Eftis and Liebowitz. The Eftis-Liebowitz expression was found to be in good agreement (plus or minus 2 percent) with both analyses for crack aspect ratios up to 0.8 and for gage half-span to specimen width ratios up to 0.5.

Mccabe, D. E.↗
NASA NTRS1978

Practical and efficient magnetic heat pump

Method for pumping heat magnetically at room temperature is more economical than existing refrigeration systems. Method uses natural magneto-thermal effect of gadolinium metal to establish temperature gradient across length of tube. Regenerative cyclic process in which gadolinium sample is magnetized and gives off heat at one end of tube, and then is demagnetized at other end to absorb heat has established temperature gradients of 144 degrees F in experiments near room temperature. Other materials with large magnetothermal effects can be used below room temperature. Possible commercial applications include freeze-drying and food processing, cold storage, and heating and cooling of buildings, plants, and ships.

Brown, G. V.↗