Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Experiments with Plasmas Produced by Potassium-Seeded Cyanogen Oxygen Flames for Study of Radio Transmission at Simulated Reentry Vehicle Plasma Conditions

A method for the chemical production of an ionized gas stream for application to radio transmission studies is described. Involved is the combustion of gaseous cyanogen and oxygen with the addition of vaporized potassium in some cases to further increase the ionization. Experiments are described in which a 3-inch-diameter subsonic free jet at atmospheric pressure is used, and the results are presented. The plasma obtained by using this method is sufficient to simulate plasma conditions expected for reentering hypersonic vehicles. The unseeded plasma stream temperature is indicated to be about 4,200 K, with the degree of ionization indicated to be that expected from thermal equilibrium considerations. Measurements of radio-signal loss due to the unseeded flame plasma are presented for microwaves of 8 to 20 kmc transmitted through the stream and for a dipole transmitting model of 219.5 mc immersed in the stream. Favorable comparison of these results with the simple plane-wave signal-attenuation theory was obtained. In the case of a 9.4-kmc microwave signal of 30-kw peak power, the preliminary indication is that the plasma characteristics were not changed due to this strong signal. Comparison of a simplified concept of radio-signal attenuation due to plasmas is made with some hypersonic reentry vehicle signal-loss data. Other areas of plasma research using this method for the transmission problem are indicated.

Huber, Paul W.↗

UO 2 solubility and chemical interactions in molten LiCl-Li 2 O

Here, this study investigated the solubility of UO 2 in LiCl-2 wt% Li 2 O at 650 °C with O 2 partial pressures up to 114 torr. Experiments were run in which UO 2 powder was contacted with the molten salt for up to 120 h. Salt samples were taken and analyzed for U and corrosion product concentration using inductively coupled plasma mass spectrometry and for Li 2 O concentration using titration. The highest measured U concentration in the salt was 0.06 wt%, and O 2 partial pressure was observed to have little to no effect on the solubility. Increasing O 2 partial pressure did increase the concentration of corrosion products in the salt. The concentration of Li 2 O in the molten salt progressively decreased with time in contact with UO 2 . This can be explained by the formation of Li 2 UO 4 via reaction of UO 2 with Li 2 O.

36 MATERIALS SCIENCE↗

X-Ray Spectroscopy of Solid-Density Plasmas in High-Intensity Laser Interactions

Intense laser–interaction experiments examining fast-electron production and energy deposition in solid-density plasmas were performed. Strong K-photon emission suppression with decreasing target-foil volume was observed. This observation is consistent with L→K and M→K electron transitions being affected by target heating. Bulk-electron temperatures of at least 200- to 300-eV are inferred for the smallest mass targets. Target heating is attributed to fast-electron recirculation inside the target.

x-ray spectroscopy, plasma, high-intensity lasers↗

Plasma Surface Interactions: Predicting the Performance and Impact of Dynamic PFC Surfaces

Interactions of plasma with material surfaces in tokamaks have long been recognized as crucial for development of practical fusion energy production. Such interactions can adversely affect both plasma performance and properties of tokamak materials by means of a large variety of physical phenomena involved. Among such phenomena attracting researchers’ attention are various mechanisms of erosion of plasma-facing components (PFCs) and resulting contamination of plasma with impurities, tritium retention in the first wall material, radiation damage and modification of mechanical properties of the tokamak structural materials, dust production, thermal loading limits and possibility of PFCs melting failure, etc. Aside from these phenomena, one of the main mechanisms strongly affecting fusion plasma discharge conditions is plasma recycling. The recycling taking place on PFCs, most importantly on divertor plates where the plasma fluxes are very large, is a major source of neutrals sustaining plasma pressure in scrape-off-layer (SOL) and contributing to SOL power dissipation by forming so-called detached plasma conditions in the divertor. Recycled neutrals can also play an important role in the edge plasma transport and stability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma Mass Filters For Nuclear Waste Reprocessing

Practical disposal of nuclear waste requires high-throughput separation techniques. The most dangerous part of nuclear waste is the fission product, which contains the most active and mobile radioisotopes and produces most of the heat. We suggest that the fission products could be separated as a group from nuclear waste using plasma mass filters. Plasmabased processes are well suited to separating nuclear waste, because mass rather than chemical properties are used for separation. A single plasma stage can replace several stages of chemical separation, producing separate streams of bulk elements, fission products, and actinoids. The plasma mass filters may have lower cost and produce less auxiliary waste than chemical processing plants. Three rotating plasma configurations are considered that act as mass filters: the plasma centrifuge, the Ohkawa filter, and the asymmetric centrifugal trap.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrode-plasma-driven radiation cutoff in long-pulse, high-power microwave devices

The impact of electrode plasma dynamics on the radiation production in a high power microwave device is examined using particle-in-cell simulations. Using the design of a compact 2.4 GHz magnetically insulated line oscillator (MILO) as the basis for numerical simulations, we characterize the time-dependent device power and radiation output over a range of cathode plasma formation rates. These numerical simulations can self-consistently produce radiation characteristics that are similar to measured signals in long pulse duration MILOs. This modeling capability should result in improved assessment of existing high-power microwave devices and lead to new designs for increased radiation pulse durations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Applications of plasma core reactors to terrestrial energy systems

Plasma core reactors offer several new options for future energy needs in addition to space power and propulsion applications. Power extraction from plasma core reactors with gaseous nuclear fuel allows operation at temperatures higher than conventional reactors. Highly efficient thermodynamic cycles and applications employing direct coupling of radiant energy are possible. Conceptual configurations of plasma core reactors for terrestrial applications are described. Closed-cycle gas turbines, MHD systems, photo- and thermo-chemical hydrogen production processes, and laser systems using plasma core reactors as prime energy sources are considered. Cycle efficiencies in the range of 50 to 65 percent are calculated for closed-cycle gas turbine and MHD electrical generators. Reactor advantages include continuous fuel reprocessing which limits inventory of radioactive by-products and thorium-U-233 breeder configurations with about 5-year doubling times.-

Latham, T. S.↗

Preparation of silicon carbide SiC-based nanopowders by the aerosol-assisted synthesis and the DC thermal plasma synthesis methods

Highlights: • Make-up of the SiC-based nanopowders is a function of the C:Si:O ratio in precursor. • Two-stage aerosol-assisted synthesis offers conditions close to equilibrium. • DC thermal plasma synthesis yields kinetically controlled SiC products. - Abstract: Nanosized SiC-based powders were prepared from selected liquid-phase organosilicon precursors by the aerosol-assisted synthesis, the DC thermal plasma synthesis, and a combination of the two methods. The two-stage aerosol-assisted synthesis method provides at the end conditions close to thermodynamic equilibrium. The single-stage thermal plasma method is characterized by short particle residence times in the reaction zone, which can lead to kinetically controlled products. The by-products and final nanopowders were characterized by powder XRD, infrared spectroscopy FT-IR, scanning electron microscopy SEM, and {sup 29}Si MAS NMR spectroscopy. BET specific surface areas of the products were determined by standard physical adsorption of nitrogen at 77 K. The major component in all synthesis routes was found to be cubic silicon carbide β-SiC with average crystallite sizes ranging from a few to tens of nanometers. In some cases, it was accompanied by free carbon, elemental silicon or silica nanoparticles. The final mesoporous β-SiC-based nanopowders have a potential as affordable catalyst supports.

36 MATERIALS SCIENCE↗

Organization by Gordon Research Conferences of the 2012 Plasma Processing Science Conference 22-27 July 2012

The 2012 Gordon Research Conference on Plasma Processing Science will feature a comprehensive program that will highlight the most cutting edge scientific advances in plasma science and technology as well as explore the applications of this nonequilibrium medium in possible approaches relative to many grand societal challenges. Fundamental science sessions will focus on plasma kinetics and chemistry, plasma surface interactions, and recent trends in plasma generation and multi-phase plasmas. Application sessions will explore the impact of plasma technology in renewable energy, the production of fuels from renewable feedstocks and carbon dioxide neutral solar fuels (from carbon dioxide and water), and plasma-enabled medicine and sterilization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Method and apparatus to produce high specific impulse and moderate thrust from a fusion-powered rocket engine

A system and method for producing and controlling high thrust and desirable specific impulse from a continuous fusion reaction is disclosed. The resultant relatively small rocket engine will have lower cost to develop, test, and operate that the prior art, allowing spacecraft missions throughout the planetary system and beyond. The rocket engine method and system includes a reactor chamber and a heating system for heating a stable plasma to produce fusion reactions in the stable plasma. Magnets produce a magnetic field that confines the stable plasma. A fuel injection system and a propellant injection system are included. The propellant injection system injects cold propellant into a gas box at one end of the reactor chamber, where the propellant is ionized into a plasma. The propellant and fusion products are directed out of the reactor chamber through a magnetic nozzle and are detached from the magnetic field lines producing thrust.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Freezing-in gravitational waves

The thermal plasma in the early Universe produced a stochastic gravitational wave (GW) background, which peaks today in the microwave regime and was dubbed the cosmic gravitational microwave background (CGMB). In previous works, only single graviton production processes that contribute to the CGMB have been considered. Here, we also investigate graviton pair production processes and show that these can lead to a significant contribution if the ratio between the maximum temperature and the Planck mass, T max / m p , divided by the internal coupling in the heat bath is large enough. As the dark matter freeze-in production mechanism is conceptually very similar to the GW production mechanism from the primordial thermal plasma, we refer to the latter as “GW freeze-in production.” We show that quantum gravity effects appear in single graviton production and are smaller by a factor ( T max / m p ) 2 than the leading order contribution. In our work, we explicitly compute the CGMB spectrum within a scalar model with quartic interaction. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

Shock formation induced by poloidal flow and its effects on the edge stability in tokamaks

In the high confinement mode of tokamaks, magnitude of the radial electric field increases at the edge. Thus, the poloidal flow inside the transport barrier can be sonic when the edge pressure gradient is not steep enough to make the poloidal flow subsonic. When the poloidal Mach number is close to unity, a shock appears in the low field side and causes a large density perturbation. In this study, we describe a shock induced by the sonic poloidal plasma flow. Then, an entropy production across the shock is calculated. Finally, we introduce a simple model for Type III edge localized modes using the poloidal density variation driven by the sonic poloidal flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Factors Affecting VUV Emission Spectrum near Lyman-{alpha} from a Hydrogen Plasma Source

Vacuum ultra violet (VUV) emission spectra from plasmas near walls of different metallic materials were measured to estimate the effect upon the local production rate of vibrational excited hydrogen molecules due to plasma wall interaction. Among Cu, Mo, Ni, Ta and Ti, the intensity of band spectrum around Lyman-{alpha} had become the largest when Cu wall was used while it was the smallest for Ti. The role of particle reflection from the plasma electrode surface upon the H{sup -} production by a pure electron volume process is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of Ionization in a Laser Wakefield Accelerator

Experimental results are presented from studies of the ionization injection process in laser wakefield acceleration using the Hercules laser with laser power up to 100 TW. Gas jet targets consisting of gas mixtures reduced the density threshold required for electron injection and increased the maximum beam charge. Gas mixture targets produced smooth beams even at densities which would produce severe beam breakup in pure He targets and the divergence was found to increase with gas mixture pressure.

43 PARTICLE ACCELERATORS↗

Acceleration of Electrons in Modulated Plasma Channels with Radially Polarized Laser Pulses

Two highly versatile experimental techniques are demonstrated for making preformed plasma waveguides with periodic structure capable of supporting the propagation of ultra-intense femtosecond laser pulses. These waveguides were made in hydrogen, nitrogen and argon plasmas with a length of 15 mm and modulation period as short as 35 {mu}m. Simulations show that these guides allow direct laser acceleration of electrons, achieving gradients of 80 MV/cm and 10 MV/cm for laser pulse powers of 1.9 TW and 30 GW, respectively. We also demonstrate a technique for making the required radially polarized pulses.

43 PARTICLE ACCELERATORS↗

Colliding Laser Pulses for Laser-Plasma Accelerator Injection Control

Decoupling injection from acceleration is a key challenge to achieve compact, reliable, tunable laser-plasma accelerators (LPA). In colliding pulse injection the beat between multiple laser pulses can be used to control energy, energy spread, and emittance of the electron beam by injecting electrons in momentum and phase into the accelerating phase of the wake trailing the driver laser pulse. At LBNL, using automated control of spatiotemporal overlap of laser pulses, two-pulse experiments showed stable operation and reproducibility over hours of operation. Arrival time of the colliding beam was scanned, and the measured timing window and density of optimal operation agree with simulations. The accelerator length was mapped by scanning the collision point.

43 PARTICLE ACCELERATORS↗

Charge steering of laser plasma accelerated fast ions in a liquid spray — creation of MeV negative ion and neutral atom beams

The scenario of “electron capture and loss” has been recently proposed for the formation of negative ion and neutral atom beams with up to MeV kinetic energy [S. Ter-Avetisyan, et al., Appl. Phys. Lett. 99, 051501 (2011)]. Validation of these processes and of their generic nature is here provided in experiments where the ion source and the interaction medium have been spatially separated. Fast positive ions accelerated from a laser plasma source are sent through a cold spray where their charge is changed. Such formed neutral atom or negative ion has nearly the same momentum as the original positive ion. Experiments are released for protons, carbon, and oxygen ions and corresponding beams of negative ions and neutral atoms have been obtained. The electron capture and loss phenomenon is confirmed to be the origin of the negative ion and neutral atom beams. The equilibrium ratios of different charge components and cross sections have been measured. Our method is general and allows the creation of beams of neutral atoms and negative ions for different species which inherit the characteristics of the positive ion source.

43 PARTICLE ACCELERATORS↗