Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Microplasticity of Amorphous and Crystallized Fe{sub 78}P{sub 20}Si{sub 2} Alloy

In order to determine the mechanism of plastic deformation, the hardness and local plasticity of amorphous Fe{sub 78}P{sub 20}Si{sub 2} alloy are compared at different stages of its crystallization activated by thermal treatment at 300–750°C or short-term photon treatment with a radiation dose coming to the sample of 10–60 J/cm{sup 2}. The phase composition and structure were investigated by X-ray diffractometry and high-resolution transmission electron microscopy. With the same sequence of structural changes, the crystallization rate under photon treatment is more than two orders of magnitude higher than that under thermal treatment, which indicates the effect of a high rate of input of the process activation energy. The nonmonotonic dependence of the hardness, elastic modulus, and the proportion of plastic strain in the indentation work is found, depending on the annealing temperature or radiation dose received by the sample, as a result of structural changes in the alloy. The local plasticity of the initial alloy and fully crystallized alloy are close in magnitude. Based on the features of the crystal structure of the Fe{sub 3}P phase (the impossibility of the dislocation mechanism of plastic deformation) and assuming that the structural unit (tetrahedral Fe{sub 3}P cluster) of the crystallized and amorphous alloy is identical, a conclusion was formulated about the cluster mechanism of plastic deformation of the amorphous alloy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coherent Growth of InP/InAsP/InP Nanowires on a Si (111) Surface by Molecular-Beam Epitaxy

Results obtained in a study of the growth of InP/InAsP/InP nanowires on the Si (111) surface are presented. Using a special procedure of substrate preparation immediately before the growth made it possible to obtain a nanowire coherency with the substrate of nearly 100%. A high-intensity emission from nanostructures of this kind was observed at a wavelength of ~1.3 μm at room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Influence of the InAlAs Layer Surface Morphology on the Temperature Dependence of Parameters of Au/Ti/n-InAlAs(001) Schottky Diodes

Growth-related structural defects present on the surface of InAlAs layers grown by molecular beam epitaxy on InP(001) substrates influence the temperature dependences of the current–voltage characteristics of Au/Ti/InAlAs Schottky barriers. It is established that these defects in the form of pits cause the appearance of regions with reduced barrier height. At a surface density of ≥10{sup 7} cm{sup –2}, these defects significantly influence the parameters of the Schottky barriers at temperatures below 200 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cascade Solar Cells Based on GaP/Si/Ge Nanoheterostructures

GaP/Si/Ge nanoheterostructures have been obtained using the method of pulsed laser deposition, and an energy band diagram of cascade solar cells based on these heterostructures were modeled. GaP and Ge nanolayers grown on Si substrates were studied by Raman spectroscopy and X-ray diffraction. Spectral dependences of the external quantum efficiency response of GaP/Si/Ge nanoheterostructures were determined.

14 SOLAR ENERGY↗

Room Temperature Lasing of Single-Mode Arched-Cavity Quantum-Cascade Lasers

Single-mode lasing at room temperature in quantum-cascade lasers (QCLs) with arched cavity design has been demonstrated. The output optical power in single-mode lasing regime at ~7.7-μm lasing wavelength was above 6 mW with a side-mode suppression ratio of up to 25 dB. The QCL heterostructure for the arched cavities was grown by molecular-beam epitaxy (MBE) based on a heterojunction of In{sub 0.53}Ga{sub 0.47}As/Al{sub 0.48}In{sub 0.52}As solid alloys, lattice-matched with InP substrate, and InP layers performing the function of waveguide claddings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-Power Quantum-Cascade Lasers Emitting in the 8-μm Wavelength Range

Molecular beam epitaxy techniques were used to grow a quantum-cascade laser (QCL) heterostructure based on an In{sub 0.53}Ga{sub 0.47}As/Al{sub 0.48}In{sub 0.52}As heteropair lattice-matched with an InP substrate. InP layers were used to form an optical waveguide. The obtained QCL heterostructure ensured room-temperature lasing in the 8-μm wavelength range at a maximum output optical power of 0.45 W from one facet in a standard ridge geometry of the Fabry–Pérot cavities formed by cleaved facets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, Composition, Photoluminescence, and Stability of Properties of Colloidal InSb-Based Quantum Dots

Colloidal InSb-based quantum dots (QDs) without shells and with InP, CdS, InP/CdS, and InP(Cd)/CdS shells were synthesized and studied. The best characteristics of photoluminescence and its stability were obtained for InSb core/shell QDs with InP(Cd)/CdS two-layer shell. The obtained results are explained in the framework of models of the excitonic recombination mechanism and the electron quantum confinement of a QD core by an isomorphous two-layer shell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heterobarrier Varactors with Nonuniformly Doped Modulation Layers

Optimum shape of the capacitance–voltage (C–V) characteristic is a critical parameter determining the efficiency of frequency multiplication in heterobarrier varactors (HBVs) operating in the millimeter and submillimeter frequency ranges. A numerical model for calculating the C–V characteristics and leakage currents of HBV heterostructures with arbitrary composition and doping profiles has been verified on the basis of published and original experimental data. A specially designed HBV heterostructure with three undoped InAlAs/AlAs/InAlAs barriers surrounded by nonuniformly doped n-InGaAs modulation layers has been grown by molecular beam epitaxy on InP substrate. Prototype HBVs manufactured using the proposed heterostructure demonstrated a nearly cosine shape of the C–V curve at bias voltages up to 2 V, increased overlap capacitance, and low leakage currents.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental study on GaP surface damage threshold induced by a high repetition rate femtosecond laser

The surface damage threshold of undoped bulk <110> GaP induced by a high repetition rate femtosecond pulse at 1040 nm with a duration of 61 fs was studied. The threshold value was obtained by a linear fit of the incident single pulse fluence and was confirmed with a breakdown test around the threshold level. The result will be useful in high intensity, high repetition rate laser applications and ultrafast processes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulation and characterization of cation disorder in ZnGeP 2

New optoelectronic materials are needed for improving the efficiency and reliability of devices such as solar cells. Cation ordering presents one means of controlling optoelectronic properties while introducing potential to also diversify the mineral constituents of electronic devices; however, the mechanisms of ordering are not yet well understood. To better understand cation ordering in a system integratable with current devices, we assess short- and long-range order parameters of ZnGeP 2 , a material closely lattice matched to Si. Structures are simulated using cluster-based Monte Carlo and first-principles calculations to compare structural distortions, periodicity, and local coordination environments in ZnGeP 2 to experimental data both from the literature and presented here. Comparing order parameters, we relate the transition in order parameters of ZnGeP 2 to that of ZnGeP 2 , discuss the reduction of band gaps with disorder, and show that traditional structural characterization alone is insufficient for understanding order in ZnGeP 2 .

14 SOLAR ENERGY↗

Upside-Down Solar Cell Achieves Record Efficiencies (Fact Sheet)

The inverted metamorphic multijunction (IMM) solar cell is an exercise in efficient innovation - literally, as the technology boasted the highest demonstrated efficiency for converting sunlight into electrical energy at its debut in 2005. Scientists at the National Renewable Energy Laboratory (NREL) inverted the conventional photovoltaic (PV) structure to revolutionary effect, achieving solar conversion efficiencies of 33.8% and 40.8% under one-sun and concentrated conditions, respectively.

14 SOLAR ENERGY↗

Catalytic Process for the Conversion of Coal-derived Syngas to Ethanol

The catalytic conversion of coal-derived syngas to C 2+ alcohols and oxygenates has attracted great attention due to their potential as chemical intermediates and fuel components. This is particularly true of ethanol, which can serve as a transportation fuel blending agent, as well as a hydrogen carrier. A thermodynamic analysis of CO hydrogenation to ethanol that does not allow for byproducts such as methane or methanol shows that the reaction: 2 CO + 4 H 2 → C 2 H 5 OH + H 2 O is thermodynamically favorable at conditions of practical interest (e.g, 30 bar, ~< 250 C).

03 NATURAL GAS↗

Inverted Metamorphic Multijunction (IMM) Cell Processing Instructions

This technical report details the processing schedule used to fabricate Inverted Metamorphic Multijunction (IMM) concentrator solar cells at The National Renewable Energy Laboratory (NREL). These devices are used as experimental test structures to support the research at NREL that is focused on increasing the efficiency of photovoltaic power conversion. They are not intended to be devicessuitable for deployment in working concentrator systems primarily because of heat sinking issues. The process schedule was developed to be compatible with small sample sizes and to afford relatively rapid turn-around times, in support of research efforts. The report describes the use of electro deposition of gold for both the back and front contacts. Electro-deposition is used because of itsrapid turn around time and because it is a benign metallization technique that is seldom responsible for damage to the semiconductors. The layer transfer technique is detailed including the use of a commercially available adhesive and the etching away of the parent gallium arsenide substrate. Photolithography is used to define front contact grids as well as the mesa area of the cell. Finally,the selective wet chemical etchant system is introduced and its use to reveal the back contact is described.

14 SOLAR ENERGY↗

The Role of Metal Oxides in Li-S Batteries: A High-Areal-Capacity Sulfur Composite Cathode Investigation

Compared to lithium-ion batteries (LIB), lithium-sulfur (Li-S) batteries have low cost and high theoretical specific energy (2510 Wh/kg or about 10 times of the LIB). However, Li-S batteries have several challenges, including large volume expansion, poor utilization of the end products, sluggish kinetics of polysulfides, and crossover, so-called the "shuttle effect". To address these issues, we have introduced metal oxides to the Li-S electrode to develop a metal-oxide-sulfur composite electrode. We aim to use metal oxides to assist the Li-S formation (dissociation) during discharge (charge) cycles. We elect to focus on LIB-based metal oxides to ensure that the added material can contribute storage capacity to the battery. Our cathodes are fabricated by both the conventional slurry casting and air-controlled electrospray. LIB electrode materials, such as Li(Ni 0.6 Mn 0.6 Co 0.2 )O 2 , LiMn 2 O 4 , Li 2 TiO 3 , etc, were incorporated with the sulfur-carbon composite and their charge-discharge performances are compared. We found that the presence of metal oxides increased sulfur utilization with stable cycling performance, even in cells with high areal capacities. To unveil the interactions between lithium metal oxides and sulfur, the cathodes were analyzed by various characterization techniques, including scanning electron microscopy, X-ray diffraction, thermogravimetric analysis, and electrochemistry. The analysis of the role of the oxides will be presented along with the reaction mechanism.

25 ENERGY STORAGE↗

Single Crystal Growth, Resistivity, and Electronic Structure of the Weyl Semimetals NbP and TaP

We have successfully synthesized niobium monophosphide and tantalum monophosphide crystals by a chemical vapor transport technique. We report resistivity vs. temperature of both materials in the temperature range from 2 K to 300 K. We have also performed electronic structure calculations and present the band structure and density of states of these two compounds. The calculations show that both compounds are semimetals, as their conduction and valence bands overlap near the Fermi energy.

36 MATERIALS SCIENCE↗