Ramp Forecasting Performance from Improved Short-Term Wind Power Forecasting
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Purpose: The relationship between microwave ablation system operating frequency and ablation performance is not currently well understood. The objective of this study was to comparatively assess the differences in microwave ablation at 915 MHz and 2.45 GHz. Methods: Analytical expressions for electromagnetic radiation from point sources were used to compare power deposition at the two frequencies of interest. A 3D electromagnetic-thermal bioheat transfer solver was implemented with the finite element method to characterize power deposition and thermal ablation with asymmetrical insulated dipole antennas (single-antenna and dual-antenna synchronous arrays). Simulation results were validated against experiments in ex vivo tissue. Results: Theoretical, computational, and experimental results indicated greater power deposition and larger diameter ablation zones when using a single insulated microwave antenna at 2.45 GHz; experimentally, 32 ± 4.1 mm and 36.3 ± 1.0 mm for 5 and 10 min, respectively, at 2.45 GHz, compared to 24 ± 1.7 mm and 29.5 ± 0.6 mm at 915 MHz, with 30 W forward power at the antenna input port. In experiments, faster heating was observed at locations 5 mm (0.91 vs 0.49 °C/s) and 10 mm (0.28 vs 0.15 °C/s) from the antenna operating at 2.45 GHz. Larger ablation zones were observed with dual-antenna arrays at 2.45 GHz; however, the differences were less pronounced than for single antennas. Conclusions: Single- and dual-antenna arrays systems operating at 2.45 GHz yield larger ablation zone due to greater power deposition in proximity to the antenna, as well as greater role of thermal conduction.
Increased interest by Payload Developers in utilization of the Joint Station LAN (Local Area Network) (JSL) for command and data transactions has driven the investigation of providing bi-directional Ethernet communication with PEP (Payload Executive Processor). Ethernet-only payload developers are interested in taking advantage of the services provided by PEP. Enabling Ethernet communications within PEP requires more than just turning on the hardware. PEP contains no Operating System (OS) or Ethernet stack so it does not inherit any built in functionality for Ethernet support. Both hardware drivers and application software must be developed from scratch. In the absence of an OS (Operating System) the design must address security issues in terms of access and data transferred, i.e. blocking unauthorized users and preventing denial of service. Developing a design to process Ethernet data within the existing real-time constraints of PEP requires a few compromises: data rates, supported protocols, custom packet format and limited client connections to name a few. Integration of the light weight internet protocol (LwIP). Ethernet stack provides a customizable solution for the embedded real-time environment. As utilization of the JSL increases, the successful implementation of an Ethernet interface enhances the utilization of PEP, and provides a new path for future Ethernet-only payloads to gain access to around the clock command and data services.
The Appropriations Bill passed by the US Congress in February 2019 instructed NASA to direct “not less than $100,000,000 for the development of nuclear thermal propulsion, of which not less than $70,000,000 shall be for the design of a flight demonstration by 2024 for which a multi-year plan is required by both the House and the Senate within 180 days of enactment of this agreement." As part of NASA’s response to this direction, the Advanced Concepts Office (ACO) at the Marshall Space Flight Center (MSFC) was tasked with leading a study to develop a nuclear thermal propulsion (NTP) flight demonstration (FD) concept and evaluate its feasibility with respect to the near-term schedule goal. During formulation for the NTP FD study, two perspectives emerged with regards to FD concept design. The first seeks to strictly observe the immediate near-term schedule goal, embracing a completely “off-the-shelf,” high-TRL approach to subsystem design and component selection. The downside to this approach is that the propulsion performance to be expected from such a design is significantly lower than what NTP promises for operational systems, and the value of the flight demo is potentially reduced due to a lack of traceability. The second approach advocates for an FD concept that shows increased traceability to the projected designs of operational systems, providing risk reduction for future NTP-enabled missions. This option comes at the cost of schedule and development risks, as it requires some new investments in nuclear reactor fuels and design. In order to understand the implications and differences between these two approaches, the ACO team elected to perform a concept design of each type, labeling the immediate near-term concept Flight Demo 1 (FD1), and the higher traceability concept Flight Demo 2 (FD2). This paper will present a summary of the mission profiles and system designs for both FD1 and FD2, identifying key drivers and challenges for each design.
Paging memory from random access memory (`RAM`) to backing storage in a parallel computer that includes a plurality of compute nodes, including: executing a data processing application on a virtual machine operating system in a virtual machine on a first compute node; providing, by a second compute node, backing storage for the contents of RAM on the first compute node; and swapping, by the virtual machine operating system in the virtual machine on the first compute node, a page of memory from RAM on the first compute node to the backing storage on the second compute node.
Air-conditioner provides ventilation designed to be used alone or incorporated into cooling or heating system operates efficiently only by recirculating stale air within building. Energy needed to operate overall ventilating cooling or heating system slightly greater than operating nonventilating cooling or heating system. Helps to preserve energy efficiency while satisfying need for increased forced ventilation to prevent accumulation of undesired gases like radon and formaldehyde. Provides fresh treated air to variety of confined spaces: hospital surgeries, laboratories, clean rooms, and printing shops and other places where solvents used. In mobile homes and portable classrooms, eliminates irritant chemicals exuded by carpets, panels, and other materials, ensuring healthy indoor environment for occupants.
AXE, An Experimental Environment for Parallel Systems, was designed to model and simulate for parallel systems at the process level. It provides an integrated environment for specifying computation models, multiprocessor architectures, data collection, and performance visualization. AXE is being used at NASA-Ames for developing resource management strategies, parallel problem formulation, multiprocessor architectures, and operating system issues related to the High Performance Computing and Communications Program. AXE's simple, structured user-interface enables the user to model parallel programs and machines precisely and efficiently. Its quick turn-around time keeps the user interested and productive. AXE models multicomputers. The user may easily modify various architectural parameters including the number of sites, connection topologies, and overhead for operating system activities. Parallel computations in AXE are represented as collections of autonomous computing objects known as players. Their use and behavior is described. Performance data of the multiprocessor model can be observed on a color screen. These include CPU and message routing bottlenecks, and the dynamic status of the software.
As modern space propulsion and exploration systems improve in capability and efficiency, their designs are becoming increasingly sophisticated and complex. Determining the health state of these systems, using traditional parameter limit checking, model-based, or rule-based methods, is becoming more difficult as the number of sensors and component interactions grow. Data-driven monitoring techniques have been developed to address these issues by analyzing system operations data to automatically characterize normal system behavior. System health can be monitored by comparing real-time operating data with these nominal characterizations, providing detection of anomalous data signatures indicative of system faults or failures. The Inductive Monitoring System (IMS) is a data-driven system health monitoring software tool that has been successfully applied to several aerospace applications. IMS uses a data mining technique called clustering to analyze archived system data and characterize normal interactions between parameters. The scope of IMS based data-driven monitoring applications continues to expand with current development activities. Successful IMS deployment in the International Space Station (ISS) flight control room to monitor ISS attitude control systems has led to applications in other ISS flight control disciplines, such as thermal control. It has also generated interest in data-driven monitoring capability for Constellation, NASA's program to replace the Space Shuttle with new launch vehicles and spacecraft capable of returning astronauts to the moon, and then on to Mars. Several projects are currently underway to evaluate and mature the IMS technology and complementary tools for use in the Constellation program. These include an experiment on board the Air Force TacSat-3 satellite, and ground systems monitoring for NASA's Ares I-X and Ares I launch vehicles. The TacSat-3 Vehicle System Management (TVSM) project is a software experiment to integrate fault and anomaly detection algorithms and diagnosis tools with executive and adaptive planning functions contained in the flight software on-board the Air Force Research Laboratory TacSat-3 satellite. The TVSM software package will be uploaded after launch to monitor spacecraft subsystems such as power and guidance, navigation, and control (GN&C). It will analyze data in real-time to demonstrate detection of faults and unusual conditions, diagnose problems, and react to threats to spacecraft health and mission goals. The experiment will demonstrate the feasibility and effectiveness of integrated system health management (ISHM) technologies with both ground and on-board experiments.
The implementation of the HAL/S language on the IBM-360, and in particular the mechanization of its real time, I/O, and error control statements within the OS-360 environment is described. The objectives are twofold: (1) An analysis and general description of HAL/S real time, I/O, and error control statements and the structure required to mechanize these statements. The emphasis is on describing the logical functions performed upon execution of each HAL statement rather than defining whether it is accomplished by the compiler or operating system. (2) An identification of the OS-360 facilities required during execution of HAL/S code as implemented for the current HAL/S-360 compiler; and an evaluation of the aspects involved with interfacing HAL/S with the SUMC operating system utilizing either the HAL/S-360 compiler or by designing a new HAL/S-SUMC compiler.
The experience of the Idaho Department of Water Resources Remote Sensing Unit in bringing on line their System 511 is described. The system 511 is run on a PDP minicomputer. The minimum system hardware configuration is an 11/34 with a minimum core of 128 K word, 10 megabytes of direct access disk and a floating point processor. The required software configuration is an RSX 11M V 3.2 operating system with a FORTRAN IV plus compiler. The structure of System 511 is a series of hierarchical modular software units. Problems occurring during the systems installation are discussed, and the system operating and error detection capabilities and documentation evaluated.
Presentation based upon full report of a Colorado case study and coordination framework, which is available at https://www.nrel.gov/docs/fy20osti/77096.pdf. JISEA analysts Brian Sergi, Omar Guerra, and Bri-Mathias Hodge will present on recent JISEA work on coordination between the natural gas and electricity sectors. Power and gas are becoming increasingly interdependent but weren't designed to function together. How does greater coordination impact system operations with different levels of solar and wind penetrations? This free JISEA presentation will take place in a Webinar on Tuesday, May 11, 2021 at 12 p.m.: Learn how greater coordination between the natural gas and electricity sectors impacts system operations with different levels of solar and wind penetrations. Presentation information includes: Historical and projected data for natural gas consumption and power generation in the United States as demonstrated by 2014 East Coast Polar Vortex, 2021 Texas Winter Storm Uri. Showing coupling points, FERC identified need for better coordination, different levels of coordination (decision making and optimization control), coordination framework. Case study on Colorado Front Range, ramping requirements and gas nominations, real-time dispatch (June and December scenarios), results of analysis of impacts of coordination on unserved load. Total real-time gas offtakes by node, impacts on unserved gas, effect on CO2 emissions. Discussions on clusions drawn from Colorado Case study expanded co-simulation via HELICS, objectives of the HELICS+ natural gas use case, modeling of hydrogen blending, techno economic assessment of blending, and blending impacts on energy content and pressure.
A nuclear reactor is a complicated system that is comprised of many systems and components. In order to fully model a reactor, several approximations and correlations must be used for a real-time simulation. In 1984 as part of a doctoral dissertation at Massachusetts Institute of Technology (MIT), a FORTRAN 77 program was developed to simulate a four-loop, Westinghouse pressurized water reactor (PWR). The program was later called PRISM and extended to include a comprehensive set of features accessible in a DOS-based user interface. This present work seeks to update the original PRISM program for cross platform deployment using the Python language. The goal of this present work is to update and improve a teaching tool for both students and reactor operators. Originally, PRISM was created as part of a PhD project in FORTRAN 77, but the code no longer works readily on modern operating systems. Python was chosen to rewrite the program because of the ease of use of the Python modules including Kivy as well as the portability of the program to various operating systems. This project aims to develop desktop and mobile versions of the software, allowing the user flexibility in choice of platform. This simulator is scheduled to be deployed in time for a live demonstration at the 2016 Annual ANS meeting. The project aims to produce a reactor simulator that will showcase the dynamics of a PWR system in real-time under various conditions. Some potential scenarios include startup conditions, scram operations, or failure conditions such as a break in a coolant leg. The user will be able to induce various failure scenarios and the program will simulate how the reactor will behave. The simulation will include a suite of monitoring functions that will allow automatic systems to attempt to adapt to the changing conditions, e.g., control rod movement. This program will provide an educational resource for anyone learning about nuclear reactor kinetics or dynamics of a reactor system. (authors)
The NASA LeRC in Cleveland, Ohio has completed the development and integration of a Power Management and Distribution (PMAD) DC Testbed. This testbed is a reduced scale representation of the end to end, sources to loads, Space Station Freedom Electrical Power System (SSF EPS). This unique facility is being used to demonstrate DC power generation and distribution, power management and control, and system operation techniques considered to be prime candidates for the Space Station Freedom. A key capability of the testbed is its ability to be configured to address system level issues in support of critical SSF program design milestones. Electrical power system control and operation issues like source control, source regulation, system fault protection, end-to-end system stability, health monitoring, resource allocation, and resource management are being evaluated in the testbed. The SSF EPS control functional allocation between on-board computers and ground based systems is evolving. Initially, ground based systems will perform the bulk of power system control and operation. The EPS control system is required to continuously monitor and determine the current state of the power system. The DC Testbed Control System consists of standard controllers arranged in a hierarchical and distributed architecture. These controllers provide all the monitoring and control functions for the DC Testbed Electrical Power System. Higher level controllers include the Power Management Controller, Load Management Controller, Operator Interface System, and a network of computer systems that perform some of the SSF Ground based Control Center Operation. The lower level controllers include Main Bus Switch Controllers and Photovoltaic Controllers. Power system status information is periodically provided to the higher level controllers to perform system control and operation. The data acquisition function of the control system is distributed among the various levels of the hierarchy. Data requirements are dictated by the control system algorithms being implemented at each level. A functional description of the various levels of the testbed control system architecture, the data acquisition function, and the status of its implementationis presented.
A system was constructed to demonstrate the power system operation of a solar powered aircraft. The system consists of a photovoltaic (PV) array, a charge controller, a battery, an electric motor and propeller. The system collects energy from the PV array and either utilizes this energy to operate an electric motor or stores it in a rechargeable battery for future use. The system has a control panel which displays the output of the array and battery as well as the total current going to the electric motor. The control panel also has a means for adjusting the output to the motor to control its speed. The entire system is regulated around 12 VDC.
Both the frequency and intensity of extreme weather events have been trending higher in recent years, leading to significant infrastructure loss in the electric grid. The impact of these extreme weather events is desired to be analyzed and quantified in order to help transmission and distribution system operators to prepare and prevent significant losses. In this paper, we developed an approach that models the impact of extreme weather on the power grid and identifies the worst impact zone using Q-learning (a reinforcement learning approach). The identification results reveal grid vulnerability to weather events and provide insights for system operators to help achieve optimal resource allocation and crew dispatch in order to minimize the adverse impact of extreme weather. Simulation studies are conducted on the IEEE 123-node system to demonstrate the performance of the proposed approach.
A 100 kWt cesium-lithium test loop fabricated of niobium-1% zirconium for experiments on erosion and two-phase system operation at temperatures of 980 C and velocities of 150 m/s. Although operated at design temperature for 100 hours, flow instabilities in the two-phase separator interfered with the achievement of the desired mass flow rates. A modified separator was fabricated and installed in the loop to alleviate this problem.
In this paper we present a method for designing operating systems using object-oriented frameworks. A framework can be refined into subframeworks. Constraints specify the interactions between the subframeworks. We describe how we used object-oriented frameworks to design Choices, an object-oriented operating system.
A comparison is made between two different cooling schemes, including a complete system thermal analysis and weight accounting for each. A hydrogen-direct system operates at a higher pressure (34.5 Mpa) and greater temperature rise in the coolant. There is no temperature limit on the coolant itself and high injector temperatures may be achieved, but the pressure lines must be routed over great distances (10 m). The system is simple, and the coolant is almost weightless. In contrast, an indirect system operates at a lower pressure (3.8n MPa) and the liquid coolant has a much greater thermal capacity. The greater thermal capacity causes much less of a temperature rise in the coolant. The chosen coolant is Syltherm 800. This nontoxic fluid is compatible with any metal, including titanium. The loop requires a separate fuel/coolant heat exchanger and coolant pump. The indirect system offers some distinct safety advantages but is heavier than the direct hydrogen coolant system.