Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nanostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Preparation, Characterization and Release Properties of Nanostructured Polystyrene Microparticles Containing Different Silicates

Nanostructured polystyrene microparticles containing different silicates as nanosized filler were successfully prepared using an emulsification/solvent evaporation method. X-ray diffraction showed that all hybrid systems were in an intercalated morphology. The microparticles display regular geometry, improved thermal resistance and release behavior dependent upon the silicate type in the hybrid, as demonstrated by preliminary investigations performed using benzophenone as model penetrant.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Analysis of the degradation induced by focused ion Ga{sup 3+} beam for the realization of piezoelectric nanostructures

Piezoelectric nanostructures (islands of dimensions in the lateral size range 50-500 nm) have been fabricated by focused Ga{sup 3+} ion beam (FIB) etching on PbZr{sub 0.54}Ti{sub 0.46}O{sub 3} thin films obtained by magnetron sputtering. The degradation induced by the etching process is investigated through the evolution of electromechanical activity measured by means of local piezoelectric hysteresis loops produced by piezoresponse force microscopy. The analysis of surface potential is performed by kelvin force microscopy and the measurement of current-voltage curves is carried out by conducting atomic force microscopy. Two kinds of structures, namely one based on crystallized films and the other based on amorphous ones, were studied. In this latter case, the amorphous films are postannealed after etching to obtain crystallized structure. For the structures based on the crystallized and then etched films, no piezoelectric signal was registered that evidences a serious degradation of material induced by Ga{sup 3+} ion implantation. For the structures based on the films etched in amorphous state and then crystallized, the piezoresponse signal was near to that of the reference films (crystallized and not etched) whatever were the ion dose and the island dimensions. Even for very small lateral size (50 nm), no size effect was observed. The island shapes fabricated by Ga{sup 3+} FIB etching process (islands with less than 50 nm lateral size) show a limitation of FIB processing and electron beam lithography seems to be necessary.

36 MATERIALS SCIENCE↗

Laser Nanostructurization of the Metal and Alloy Surfaces

The results from experimental and theoretical investigation of material pulsed laser treatment aimed at obtaining nano- and microstructured surface are presented. An experiment has been performed on the modification of indium surface using a solid-state diode-pumped laser. It has been shown that nano- and micro-size structures are formed under laser melting and fast crystallization of the metal surface. The kinetics of the crystallization of metals under superfast cooling. The distribution function for crystalline nuclei dimensions is analytically found within the framework of the classical kinetic equation in case of superfast temperature changing. The average number of particles in the crystalline nuclei and relative volume of the crystalline phase are determined as functions of thermodynamic and laser treatment regime parameters. Good agreement is observed with experimental results for ultrashort laser pulses induced micro- and nanostructures production.

36 MATERIALS SCIENCE↗

Nanostructuring of solid surfaces by femtosecond laser pulses

One-dimensional quasi-periodic structures whose period is much smaller than the wavelength of exciting optical radiation have been obtained on a titanium surface under the multi-shot action of linearly polarized femtosecond laser radiation at various surface energy densities. As the radiation energy density increases, the one-dimensional surface nanogratings oriented perpendicularly to the radiation polarization evolve from quasi-periodic ablative nano-grooves to regular lattices with sub-wavelength periods (90-400 nm). In contrast to the preceding works for various metals, the period of lattices for titanium decreases with increasing energy density. The formation of the indicated surface nanostructures is explained by the interference of the electric fields of incident laser radiation and a surface electromagnetic wave excited by this radiation, as shown by our transient reflectivity measurements and modeling, because the length of the surface electromagnetic wave for titanium with significant interband absorption decreases versus increasing electron excitation of the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasmonic coupling of SiO{sub 2}-Ag 'post-cap' nanostructures and silver film for surface enhanced Raman scattering

We demonstrate a surface enhanced Raman scattering (SERS) substrate consisting of SiO{sub 2}-Ag''post-cap'' nanostructures with an underlying silver film fabricated by the glancing angle deposition technique. Electromagnetic simulations predict that SERS enhancement is strongly polarization-dependent, consistent with experimental measurements. Optimized coupling between Ag cap nanoparticles and the underlying silver film can be achieved by controlling the thickness of SiO{sub 2} post sandwiched between them to significantly enhance local electric-field intensity and to increase the density of electromagnetic hot spots. A maximum SERS enhancement factor of 2.38x10{sup 9} within the hot spot region is demonstrated, providing sufficient sensitivity for many important applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

CF{sub 4} plasma treatment on nanostructure band engineered Gd{sub 2}O{sub 3}-nanocrystal nonvolatile memory

The effects of CF{sub 4} plasma treatment on Gd{sub 2}O{sub 3} nanocrystal (NC) memory were investigated. For material analysis, secondary ion mass spectrometry and x-ray photoelectron spectroscopy analyses were performed to characterize the fluorine depth profile of the Gd{sub 2}O{sub 3}-NC film. In addition, an UV-visible spectrophotometer was used to obtain the Gd{sub 2}O{sub 3} bandgap and analyzed to suggest the modified structure of the energy band. Moreover, the electrical properties, including the memory window, program/erase speed, charge retention, and endurance characteristics were significantly improved depending on the CF{sub 4} plasma treatment conditions. This can be explained by the physical model based on the built-in electric field in the Gd{sub 2}O{sub 3} nanostructure. However, it was observed that too much CF{sub 4} plasma caused large surface roughness induced by the plasma damage, leading to characteristics degradation. It was concluded that with suitable CF{sub 4} plasma treatment, this Gd{sub 2}O{sub 3}-NC memory can be applied to future nonvolatile memory applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanostructured carbon films with oriented graphitic planes

Nanostructured carbon films with oriented graphitic planes can be deposited by applying energetic carbon bombardment. The present work shows the possibility of structuring graphitic planes perpendicular to the substrate in following two distinct ways: (i) applying sufficiently large carbon energies for deposition at room temperature (E>10 keV), (ii) utilizing much lower energies for deposition at elevated substrate temperatures (T>200 deg. C). High resolution transmission electron microscopy is used to probe the graphitic planes. The alignment achieved at elevated temperatures does not depend on the deposition angle. The data provides insight into the mechanisms leading to the growth of oriented graphitic planes under different conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Observation of femtosecond laser-induced nanostructure-covered large scale waves on metals

Following femtosecond (fs) laser pulse irradiation, we produce a type of periodic surface structure with a period tens of times greater than the laser wavelength and densely covered by an iterating pattern that consists of stripes of nanostructures and microscale cellular structures. The morphology of this large scale wave pattern crucially depends on laser fluence and the number of laser pulses, but not on the laser wavelength. Our study suggests that this large scale wave is initiated by fs laser induced surface unevenness followed by periodically distributed nonuniform surface heating from fs pulse irradiation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single quantum dot emission at telecom wavelengths from metamorphic InAs/InGaAs nanostructures grown on GaAs substrates

We report on the growth by molecular beam epitaxy and the study by atomic force microscopy and photoluminescence of low density metamorphic InAs/InGaAs quantum dots. subcritical InAs coverages allow to obtain 10{sup 8} cm{sup -2} dot density and metamorphic In{sub x}Ga{sub 1-x}As (x=0.15,0.30) confining layers result in emission wavelengths at 1.3 {mu}m. We discuss optimal growth parameters and demonstrate single quantum dot emission up to 1350 nm at low temperatures, by distinguishing the main exciton complexes in these nanostructures. Reported results indicate that metamorphic quantum dots could be valuable candidates as single photon sources for long wavelength telecom windows.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Self-aligned epitaxial metal-semiconductor hybrid nanostructures for plasmonics

We demonstrate self-alignment of epitaxial Ag nanocrystals on top of low-density near-surface InAs quantum dots (QDs) grown by molecular beam epitaxy. The Ag nanocrystals support a surface plasmon resonance that can be tuned to the emission wavelength of the QDs. Photoluminescence measurements of such hybrid metal-semiconductor nanostructures reveal large enhancement of the emission intensity. Our concept of epitaxial self-alignment enables the integration of plasmonic functionality with electronic and photonic semiconductor devices operating down to the single QD level.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High-sensitivity strain mapping around epitaxial oxide nanostructures using scanning x-ray nanodiffraction.

The generation and presence of strain around nanostructures of oxides is a key to their growth, properties, and functions, but it has been a challenge to experimentally measure its sign, magnitude, and spatial distribution. Combining diffuse scattering with scanning x-ray nanodiffraction, we have mapped the strain distribution in an oxide-on-oxide nanopatterned structure with a high sensitivity (10{sup -4}) and a submicrometer spatial resolution. An edge-induced strain distribution is observed from a sample of CoFe{sub 2}O{sub 4} nanolines epitaxially grown on MgO substrate, which agrees quantitatively with the numerical simulations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

TXM-NEXAFS of TiO{sub 2}-Based Nanostructures

In this work, electronic properties of individual TiO{sub x}-pristine nanoribbons (NR) prepared by hydrothermal treatment of anatase TiO{sub 2} micro-particles were studied using the HZB transmission x-ray microscope (TXM) at the BESSY II undulator beamline U41-FSGM. NEXAFS is ideally suited to study TiO{sub 2}-based materials because both the O K-edge and Ti L-edge features are very sensitive to the local bonding environment, providing diagnostic information about the crystal structures and oxidation states of various forms of titanium oxides and sub-oxides. TXM-NEXAFS combines full-field x-ray microscopy with spectroscopy, allowing the study of the electronic structure of individual nanostructures with spatial resolution better than 25 nm and a spectral resolution of up to E/{Delta}E = 10000. The typical image field in TXM-NEXAFS measurements is about 10 {mu}mx10 {mu}m, which is large compared to the individual nanoparticle. Therefore, one image stack already contains statistically significant data. In addition, the directional electric field vector (E-bar) of the x-rays can be used as a 'search tool' for the direction of chemical bonds of the atom selected by its absorption edge.

36 MATERIALS SCIENCE↗

Polarization and angular effects of femtosecond laser-induced nanostructure-covered large scale waves on metals

In this paper, we find that nanostructure-covered large scale waves (NC-LSWs) can be produced on metals using both s- and p-polarized femtosecond laser pulses. We show that the period of NC-LSWs can be controlled by laser fluence, the number of irradiating pulses, and the incident beam angle. By modeling angular dependence of NC-LSW period induced by s-polarized light, we reveal that inhomogeneous energy deposition plays an important role in the formation of NC-LSWs. This allows us to establish a three-step model for NC-LSW formation, the formation of laser-induced surface unevenness, inhomogeneous energy deposition due to the interference of the incident light with the scattered light, and nonuniform energy deposition due to shielding by LSWs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth of oriented Au nanostructures: Role of oxide at the interface

We report on the formation of oriented gold nanostructures on Si(100) substrate by annealing procedures in low vacuum ({approx_equal}10{sup -2} mbar) and at high temperature ({approx_equal}975 deg. C). Various thicknesses of gold films have been deposited with SiO{sub x} (using high vacuum thermal evaporation) and without SiO{sub x} (using molecular beam epitaxy) at the interface on Si(100). Electron microscopy measurements were performed to determine the morphology, orientation of the structures and the nature of oxide layer. Interfacial oxide layer, low vacuum and high temperature annealing conditions are found to be necessary to grow oriented gold structures. These gold structures can be transferred by simple scratching method.

36 MATERIALS SCIENCE↗

Nanostructured multilayered thin film barriers for Mg{sub 2}Si thermoelectric materials

The Mg{sub 2}Si-based alloys are promising candidates for thermoelectric energy conversion in the middle-high temperature range in order to replace lead compounds. The main advantages of silicide-based thermoelectrics are the nontoxicity and the abundance of their constituent elements in the earth crust. The drawback of such kind of materials is their oxygen sensitivity at high temperature that entails their use under vacuum or inert atmosphere. In order to limit the corrosion phenomena, nanostructured multilayered molybdenum silicide-based materials were deposited via RF magnetron sputtering onto stainless steel, alumina and silicon (100) to set up the deposition process and then onto Mg{sub 2}Si pellets. XRD, EDS, FE-SEM and electrical measurements at high temperature were carried out in order to obtain, respectively, the structural, compositional, morphological and electrical characterization of the deposited coatings. At the end, the mechanical behavior of the system thin film/Mg{sub 2}Si-substrate as a function of temperature and the barrier properties for oxygen protection after thermal treatment in air at high temperature were qualitatively evaluated by FE-SEM.

36 MATERIALS SCIENCE↗

Ternary eutectic growth of nanostructured thermoelectric Ag-Pb-Te materials

Nanostructured Ag-Pb-Te thermoelectric materials were fabricated by unidirectionally solidifying the ternary Ag-Pb-Te eutectic and near-eutectic alloys using the Bridgeman method. Specially, the Bridgman-grown eutectic alloy exhibited a partially aligned lamellar microstructure, which consisted of Ag{sub 5}Te{sub 3} and Te phases, with additional 200-600 nm size particles of PbTe. The self-assembled interfaces altered the thermal and electronic transport properties in the bulk Ag-Pb-Te eutectic alloy. Presumably due to phonon scattering from the nanoscale microstructure, a low thermal conductivity ({kappa} = 0.3 W/mK) was achieved of the eutectic alloy, leading to a zT peak of 0.41 at 400 K.

36 MATERIALS SCIENCE↗

Electronic structure and thermoelectric properties of nanostructured EuTi{sub 1-x}Nb{sub x}O{sub 3-{delta}} (x = 0.00; 0.02)

The thermoelectric properties of polycrystalline nanostructured EuTiO{sub 3-{delta}} samples are improved by a substitution of 2% Nb for Ti. The figure of merit (ZT) was measured to reach ZT(EuTi{sub 0.98}Nb{sub 0.02}O{sub 3-{delta}}) Almost-Equal-To 0.4 at T= 1040 K while ZT(EuTiO{sub 3-{delta}}) Almost-Equal-To 0.3 at the same temperature. X-ray photoelectron spectra reveal that the in-gap states at the Fermi level are more pronounced for the Nb-substituted samples, resulting in an improved power factor. The valence band peak below the Fermi level is sharply shaped, therefore fulfilling the condition for a large Seebeck coefficient. The specific porosity of the samples reduces the lattice thermal conductivity with a minor effect on the electron transport.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The role of asymmetric excitation in self-organized nanostructure formation upon femtosecond laser ablation

Surface pattering upon multi-pulse femtosecond laser ablation is modeled by a non-linear-dynamic erosion/smoothing model, similar to structure formation during ion sputtering. The model is adopted to account for the influence of laser polarization on nanostructure features. Based on a nonlinear equation of the Kuramoto-Siavshinsky type, it is shown that the directional anisotropy in the pattern formation may result from a spatial anisotropy of the initial excitation/energy-coupling process, such as resonant coupling to surface plasmons/polaritons, or electron diffusion properties. Also, anisotropy of elasto-dynamic surface and diffusion properties may be involved. A comparison of numeric simulations based on the model with corresponding experi-mental results gives a very good agreement.

36 MATERIALS SCIENCE↗