SEARCH · Engineering Papers

Results for “NORMAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Morphology of ductile metals eroded by a jet of spherical particles impinging at normal incidence

Scanning electron microscopy and energy-dispersive X-ray spectroscopy are used, together with surface profile measurements, in the present morphological study of the erosion of an aluminum alloy and copper by the normal impact of spherical glass erodent particles. The morphology of the damage pattern is a manifestation of the flow pattern of erodent particles, and yields insight into the mechanisms that may be active at different stages of erosion. The simultaneous appearance of radial cracks and concentric rings is reported, together with wave crests which contain an accumulation of metallic flakes. A preliminary analysis is advanced to explain the formation of the various damage patterns observed.

Veerabhadra Rao, P.↗

NASA NTRS1983

An integral analysis of transonic normal shock wave/turbulent boundary layer interactions in internal flow

An approximate integral viscous-inviscid interaction method is presented for calculating the development of a turbulent boundary layer subjected to a normal shock wave induced adverse pressure gradient in an internal axisymmetric flow. The inflow conditions and the downstream pressure are provided for the computation. In the supersonic region of shock pressure rise, the Prandtl-Meyer function is used to couple the viscous and inviscid flows. An analytical model for the coupling process is postulated and appropriate equations are defined. Downstream of the sonic point, one-dimensional inviscid flow is assumed for coupling with the viscous flow. The turbulent boundary layer is calculated using Green's integral lag-entrainment method. Comparisons of the solutions with the experimental data are made for interactions which are unseparated, near separation and separated. For comparison purposes, solutions to the time-dependent, mass-averaged, Navier-Stokes equations incorporating a two-equation, Wilcox-Rubesin turbulence model are also shown. The computed results from the integral method show good agreement with experimental data for unseparated interactions and reasonable agreement with the trend of the viscous effects when the interaction becomes increasingly separated.

Om, D.↗

NASA NTRS1983

Far infrared absorption in normal H2 from 77 to 298 K

The translational-rotational absorption spectrum of normal H2 has been measured from 80 to 900/cm at seven temperatures from 77.4 to 298 K. These results have been accurately fitted by a three-parameter line-shape function, thereby providing a reliable way of predicting the absorption of H2 anywhere in this frequency and temperature region.

Dore, P.↗

NASA NTRS1983

Discrimination Relative to Measures of Non-Normality

The robustness of discriminant functions to nonnormality is investigated. The performance of procedures relative to measures of the difference between the actual distribution of the observations and the usual assumption of normal densities is assessed. For example, the two population, mixed distributions problem with equal costs of misclassification are considered. The parameters are estimated by maximum likelihood and recently proposed robust methods.

Smith, W. B.↗

NASA NTRS1984

A normal incidence, high resolution X-ray telescope for solar coronal observations

A Normal Incidence high resolution X-ray Telescope is reported. The design of a telescope assembly which, after fabrication, will be integrated with the mirror fabrication process is described. The assembly is engineered to fit into the Black Brant rocket skin to survive sounding rocket launch conditions. A flight ready camera is modified and tested.

Golub, L.↗

NASA NTRS1984

On the identification of normal modes of oscillation from observations of the solar periphery

The decomposition of solar oscillations into their constituent normal modes requires a knowledge of both the spatial and temporal variation of the perturbation to the Sun's surface. The task is especially difficult when only limited spatial information is available. Observations of the limb darkening function, for example, are probably sensitive to too large a number of modes to permit most of the modes to be identified in a power spectrum of measurements at only a few points on the limb, unless the results are combined with other data. A procedure was considered by which the contributions from quite small groups of modes to spatially well resolved data obtained at any instant can be extracted from the remaining modes. Combining these results with frequency information then permits the modes to be identified, at least if their frequencies are low enough to ensure that modes of high degree do not contribute substantially to the signal.

Gough, D. D.↗

NASA NTRS1982

Evaluating the radiance transformation for normalizing Landsat data

A technique is examined for improving the comparability of Landsat multisppectral scanner (MSS) data acquired on different dates. The technique involves conversion of digital brightness counts to relative radiance values measured in energy units (milliwatts per square centimeter-steradian). The statistical data of signature from 23 land cover (or biomass) classifications derived from all three Landsats were compared before and after the radiance normalization. Significant convergence occurred among the data sets for mean spectral values and the variances associated with each of seven major land cover types for MSS bands 4, 5, and 7. Overall, the variance attributed to the sensor component was reduced from 5.39 to 2.69 percent, with the largest decrease occurring in band 4 (14.4 percent to 3.7 percent).

Middleton, E. M.↗

NASA NTRS1984

Wave normal directions of chorus near the equatorial source region

OGO 5 triaxial search coil magnetometer data are used to determine the wave propagation directions of postmidnight chorus in the near-equatorial region at L shells of 6 to 7. The methods used to estimate the wave normal directions involved minimum variance, the imaginary part of the cross-spectral matrix, the eigenvector of the Hermitian cross-spectral matrix, and a fitting of dispersion relations for one-wave and two-wave models to the cross-spectral matrix. Wave propagation at all frequencies within chorus tones is found to occur most frequently along the magnetic field with median and average cone angles of 9.1 deg and 12.2 deg, respectively. It is concluded that for waves propagating parallel to B, wave growth is maximum.

Goldstein, B. E.↗

NASA NTRS1984

The X-ray emission of normal spiral galaxies

Some results of an Einstein Observatory survey of X-ray emitting spiral galaxies are reported. The sources were normally 10-100 times further away than M31. Luminosities of 10 to the 38th to 10 to the 40th erg/sec were calculated and could have been generated by Pop I and Pop II binary systems, supernova remnants and small nuclear sources. Highly positive correlations were found among properties such as the integrated X-ray, optical and radio emissions. The data will also be compared with similar data from star burst and elliptical galaxies.

Fabbiano, G.↗

NASA NTRS1984

On the identification of normal modes of oscillation from observations of the solar periphery

The decomposition of solar oscillations into their constituent normal modes requires a knowledge of both the spatial and temporal variation of the perturbation to the sun's surface. The task can be especially difficult when only limited spatial information is available. Observations of the limb-darkening function, for example, are probably sensitive to too large a number of modes to permit most of the modes to be identified in a power spectrum of measurements at only a few points on the limb, unless the results are combined with other data. In this paper a procedure is considered by which the contributions from quite small groups of modes to spatially well resolved data obtained at any instant can be extracted from the remaining modes. Combining these results with frequency information then permits the modes to be identified, at least if their frequencies are low enough to ensure that modes of high degree do not contribute substantially to the signal.

Gough, D. O.↗

NASA NTRS1984

Maximum Normalized Rate as a Flying Qualities Parameter

Discrete attitude commands have become a standard task for flying qualities evaluation and control system testing. Much pilot opinion data is now available for ground-based and in-flight simulations, but adequate performance measures and prediction methods have not been established. The Step Target Tracking Prediction method, introduced in 1978, correlated time-on-target and rms tracking data with NT-33 in-flight longitudinal simulations, but did not employ parameters easily measured in manned flight and simulation. Recent application of the Step Target Tracking Prediction method to lateral flying qualities analysis has led to a new measure of performance. This quantity, called Maximum Normalized Rate (MNR), reflects the greatest attitude rate a pilot can employ during a discrete maneuver without excessive overshoot and oscillation. MNR correlates NT-33 lateral pilot opinion ratings well, and is easily measured during flight test or simulation. Futhermore, the Step Target MNR method can be used to analyze large amplitude problems concerning rate limiting and nonlinear aerodynamics.

Onstott, E. D.↗

NASA NTRS1984

Bayesian estimation of normal mixture parameters

A Bayesian, or penalized maximum likelihood, approach to the problem of estimating the parameters of a mixture of multivariate normal distributions is proposed. The Bayesian formulation eliminates the problem of singularities in the likelihood function and results in an attractive EM-like procedure. Although the question of consistency is not settled, it is suggested that the proposed method has certain advantages over both the constrained and unconstrained maximum likelihood procedures.

Peters, C.↗

NASA NTRS1984

Explanation of the Normal Winter Anomaly from the Seasonal Variation of Short Wave Absorption

The frequency dependence of the winter anomaly (WA) of radio wave absorption indicates the altitude range where the considered seasonal variation of absorption, L, takes place: 75-95 km. In this height region considerable seasonal variations of ionic composition and effective recombination coefficient, alpha sub e, exist, which can cause seasonal variations of electron concentration, N, and absorption, L. An attempt to render a qualitative estimation of the normal WA, i.e., the increased ratio of winter over summer absorption, L sub w/L sub s, at medium latitudes 40 deg and 50 deg, for solar zenith angles CHi = 60 deg and 75 deg is made. This is compared with existing experimental data.

Velinov, P. J.↗

NASA NTRS1985

High-Latitude Filtering in a Global Grid-Point Model Using Model Normal Modes

The aim of high-latitude filtering in the vicinity of the poles is to avoid the excessively short time steps imposed on an explicit time-differencing scheme by linear stability due to fast moving inertia-gravity waves near the poles. The model normal mode expansion toward the problem of high-latitude filtering in a global shallow water model using the same philosophy as that used by Daley for the problem for large timesteps in P.E. models with explicit time integration schemes was applied.

Takacs, L. L.↗

NASA NTRS1985

A Comparison of the Bounded Derivative and the Normal Mode Initialization Methods Using Real Data

Browning et al. (1980) proposed an initialization method called the bounded derivative method (BDI). They used analytical data to test the new method. Kasahara (1982) theoretically demonstrated the equivalence between BDI and the well known nonlinear normal mode initialization method (NMI). The purposes of this study are the extension of the application of BDI to real data and comparison with NMI. The unbalanced initial state (UBD) is data of January, 1979 OOZ which were interpolated from the adjacent sigma levels of the GLAS GCM to the 300 mb surface. The global barotropic model described by Takacs and Balgovind (1983) is used. Orographic forcing is explicitly included in the model. Many comparisons are performed between various quantities. However, we only present a comparison of the time evolution at two grid points A(50 S, 90 E) and B(10 S, 20 E) which represent low and middle latitude locations. To facilitate a more complete comparison an initialization experiment based on the classical balance equation (CBE) was also included.

Semazzi, F. H. M.↗

NASA NTRS1985

Normal modes in an overmoded circular waveguide coated with lossy material

The normal modes in an overmoded waveguide coated with a lossy material are analyzed, particularly for their attenuation properties as a function of coating material, layer thickness, and frequency. When the coating material is not too lossy, the low-order modes are highly attenuated even with a thin layer of coating. This coated guide serves as a mode suppressor of the low-order modes, which can be particularly useful for reducing the radar cross section (RCS) of a cavity structure such as a jet inlet. When the coating material is very lossy, low-order modes fall into two distinct groups: highly and lowly attenuated modes. However, as a/lambda (a = radius of the cylinder; lambda = the free-space wavelength) increases, the separation between these two groups becomes less distinctive. The attenuation constants of most of the low-order modes become small, and decrease as a function of lambda sup 2/a sup 3.

Lee, C. S.↗

NASA NTRS1984

Spherical microglass particle impingement studies of thermoplastic materials at normal incidence

Light optical and scanning electron microscope studies were conducted to characterize the erosion resistance of polymethyl methacrylate (PMMA), polycarbonate (PC), polytetrafluoroethylene (PTFE) and ultra-high-molecular-weight-polyethylene (UHMWPE). Erosion was caused by a jet of spherical micro-glass beads at normal impact. During the initial stages of damage, the surfaces of these materials were studied using a profilometer. Material buildup above the original surface was observed on PC and PMMA. As erosion progressed, this buildup disappeared as the pit became deeper. Little or no buildup was observed on PTFE and on UHMWPE. UHMWPE and PTFE are the most resistant materials and PMMA the least. Favorable properties for high erosion resistance seem to be high values of ultimate elongation, and strain energy and a low value of the modulus of elasticity. Erosion-rate-versus-time curves of PC and PTFE exhibit incubation, acceleration and steady state periods. A continuously increasing erosion rate period was observed however for PMMA instead of a steady state period. At early stages of damage and at low impact pressure material removal mechanisms appear to be similar to those for metallic materials.

Veerabhadra Rao, P.↗

NASA NTRS1984

Jovian decametric arcs - An estimate of the required wave normal angles from three-dimensional ray tracing.

Three-dimensional ray tracing is applied to an analysis of variable radio wave normal angle effects on the associated decametric (DAM) arc structures in the Jovian magnetosphere. The analysis is bed on 1-40 MHz radio signature recorded during Voyage 1 and 2 passages. The frequencies considered are above the R-X cut-off, and several ratios of the emission frequency/source frequency. The ray tracing code is based on a cold plasma formula and integration of the Hasselgrove (1955) equations. It is assumed that the emission is in the R-X mode, the source lies at the foot of an Io flux tube, and the emission cone is hollow. Attention is focused on data for two intense, vertex-late, high curvature DAM arc. A possible source for the arcs is found to be doppler-shifted gyroemission from a beam of electrons with an energy of 10 keV. A value of 1.1 is set as the limit of the doppler shift of the DAM emissions.

Menietti, J. D.↗