Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Meteor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Three-Wavelength Approach for Aerosol-Cloud Discrimination in the Sage III/ISS Aerosol Extinction Dataset

The tropical upper troposphere and lower stratosphere (UTLS) region is dominated by aerosols and clouds affecting Earth’s radiation budget and climate. Thus, satellites’ continuous monitoring and identification of these layers is crucial for quantifying their radiative impact. However, distinguishing between aerosols and clouds is challenging, especially under the perturbed UTLS conditions during post-volcanic eruptions and wildfire events. Aerosol-cloud discrimination is primarily based on their disparate wavelength-dependent scattering and absorption properties. In this study, we use aerosol extinction observations in the tropical (15°N-15°S) UTLS from June 2017 to February 2021, available from the latest generation of the Stratospheric Aerosol and Gas Experiment (SAGE) instrument-SAGE III onboard the International Space Station (ISS) to study aerosols and clouds. During this period, the SAGE III/ISS provided better coverage over the tropics at additional wavelength channels (relative to previous SAGE missions) and witnessed several volcanic and wildfire events that perturbed the tropical UTLS. We explore the advantage of having an extinction coefficient at an additional wavelength channel (1550 nm) from the SAGE III/ISS in aerosol-cloud discrimination using a method based on thresholds of two extinction coefficient ratios, R1R1 (520 nm/1020 nm) and R2R2 (1020 nm/1550 nm). This method was proposed earlier by Kent et al. [Appl. Opt. 36, 8639 (1997) [CrossRef] ] for the SAGE III-Meteor-3M but was never tested for the tropical region under volcanically perturbed conditions. We call this method the Extinction Color Ratio (ECR) method. The ECR method is applied to the SAGE III/ISS aerosol extinction data to obtain cloud-filtered aerosol extinction coefficients, cloud-top altitude, and seasonal cloud occurrence frequency during the entire study period. Cloud-filtered aerosol extinction coefficient obtained using the ECR method revealed the presence of enhanced aerosols in the UTLS following volcanic eruptions and wildfire events consistent with the Ozone Mapping and Profiler Suite (OMPS) and space-borne lidar-Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). The cloud-top altitude obtained from the SAGE III/ISS is within 1 km of the nearly co-located observations from OMPS and CALIOP. In general, the seasonal mean cloud-top altitude from the SAGE III/ISS events peaks during the December, January, and February months, with sunset events showing higher cloud tops than the sunrise events, indicating the seasonal and diurnal variation of the tropical convection. The seasonal altitude distribution of cloud occurrence frequency obtained from the SAGE III/ISS also agrees well with CALIOP observations within 10%. We show that the ECR method is a simple approach that relies on thresholds independent of the sampling period, providing cloud-filtered aerosol extinction coefficients uniformly for climate studies irrespective of the UTLS conditions. However, since the predecessor of SAGE III did not include a 1550 nm channel, the usefulness of this approach is limited to short-term climate studies after 2017.

Clouds Aerosols↗

Consequences of Asteroid Characterization on the State of Knowledge about Inferred Physical Properties and Impact Risk

Physical characteristics of Near-Earth Objects (NEOs) are essential inputs to planetary defense assessments. The size, density, and strength of an NEO are critical inputs to modeling behavior during atmospheric entry as well as assessing the risk of impact. Similarly, knowledge of the physical characteristics of an object are necessary to evaluate the probable result of a mitigation mission. Usually, these attributes cannot be directly measured, but increasingly sophisticated methods have been developed to infer physical properties from related measurements of asteroids, meteors, and/or meteorites. Fortuitously, some of these measurements have been obtained for enough NEOs to elucidate the distribution of values across the sampled population. However, the situation becomes more challenging when considering a specific asteroid, since it is unlikely that all the relevant measurements have been made for any given object. We have developed a Bayesian network that can combine available information about a particular NEO with knowledge of the larger population to infer probabilistic values and uncertainties for physical characteristics of interest. Distributions of asteroid population albedos, taxonomic classes, and macroporosities, along with meteorite density distributions and associations between taxonomic classes and meteorite classes, provide the default distributions for the network’s parameter nodes. The inference network links parameters for each virtual asteroid either deterministically or probabilistically as appropriate, and eliminates any unphysical combinations of parameters. Within the context of planetary defense, our Bayesian network can be used to constrain the ranges of likely impactor properties, which can subsequently reduce the uncertainty in modelling of atmospheric entry, mitigation efficacy, and impact risk assessment. When additional measurements become available for a specific object, the network incorporates those measurements to generate virtual asteroids with property distributions that are consistent with the measurements. We will use the 2023 PDC scenario to demonstrate how the inference network can be combined with plausible characterization measurements to refine the state of knowledge about likely combinations of physical parameters and the resulting impact risk.

risk assessment↗

A Historical Overview of International Space Station Extravehicular Activity Meteoroid and Orbital Debris Risk

Nearly 300 spacewalks have been conducted over the last 25 years to help build and maintain the International Space Station (ISS). During the nearly 2,000 hours of extra-vehicular activity (EVA), crew members wear extra-vehicular mobility unit (EMU) “spacesuits” to mitigate hazards of the space environment including impacts from meteoroid and orbital debris (MMOD) particles. NASA includes detailed EMU MMOD risk analyses as part of the ISS EVA review and approval process. This paper provides a general historical overview of the ISS EVA MMOD risks and the associated risk assessment process. The NASA Johnson Space Center (JSC) Hypervelocity Impact Technology (HVIT) Team produces the ISS EVA MMOD risk analyses using the Bumper3 MMOD risk analysis code in conjunction with detailed information about the EVA including crew-member EVA work sites, crew translation paths, suit orientation, and duration. Detailed physical models of the EMU spacesuits and the ISS are included and tailored for each EVA analysis. Two types of MMOD risk are included: (1) Penetration, and (2) Catastrophic. Penetration risk is for any size leak in the EMU suit. Catastrophic risk is a subset of Penetration Risk and only includes penetrations that cause a 4mm diameter hole (or larger) in the inner “bladder” layer of the EMU suit. This size hole will exceed the ability of the EMU suit to compensate. The MMOD risk analyses also utilize the latest orbital debris environment and meteoroid environment models including additional transient factors to account for recent satellite break-ups and annual meteor storms. These additional factors and the associated increase in EVA MMOD risk are considered when scheduling an EVA to reduce EMU MMOD risk.

Dana M. Lear↗

Machine Learning for the Prediction of Local Asteroid Damages

Risk assessment studies of local asteroid hazards traditionally simulate the physics of meteors with engineering models tailored to analyze tens-of-millions of scenarios. However, these simplified approaches still need to solve time-dependent ODEs to model the entry process and the resulting ground damage. With a computational cost of O(0.01 CPU.s) per scenario, simulating these large numbers of potential entry conditions in risk assessment studies can take several days on local computers. To improve computational efficiency, we propose in this paper an orthogonal approach based on machine learning models to predict the size of damaged areas given a list of entry parameters. We train 5 machine learning methods and compare the predictions to the outputs of the PAIR model, first only with primitive entry condition variables, and then with more advanced features. We find that complex models like neural networks are well-suited to estimate blast hazards, while simpler linear models can accurately assess thermal damage. For both types of hazards, the radii of damaged areas can be predicted with around 10% average errors and a coefficient of determination (R2) of 0.99. The CPU time is decreased by a factor O(10 3 ) compared to the PAIR model, which enables the simulation of millions of scenarios in minutes, on a local computer. We then use the same machine learning approaches for a classification task where the models are trained to predict if an asteroid will produce a given level of damage. Results show that complex models like the gradient boosting classifier and the neural network can perform this task with 98% accuracy. Beyond surrogate models, we finally incorporate the machine learning algorithms to the state-of-the-art Shapley sensitivity analysis and present a ranking of the entry parameters based on their contributions to ground damages.

SMD↗

A Review of International Space Station Extravehicular Activity Micrometeoroid and Orbital Debris Risk

Nearly 300 spacewalks have been conducted over the last 25 years to support the construction and maintenance of the International Space Station (ISS). During the nearly 2,000 hours of extra-vehicular activity (EVA), crew wore extra-vehicular mobility unit (EMU) “spacesuits” to help mitigate hazards of the space environment including impacts from micrometeoroid and orbital debris (MMOD) particles. The National Aeronautics and Space Administration (NASA) conducts detailed EMU MMOD risk analyses as part of the ISS EVA review and approval process. This paper provides a general historical overview of the ISS EVA MMOD risks and the associated risk assessment process. The NASA Johnson Space Center (JSC) Hypervelocity Impact Technology (HVIT) Team produces the ISS EVA MMOD risk analyses using the Bumper MMOD risk analysis code in conjunction with detailed information about the EVA including crew member EVA work sites, crew translation paths, suit orientation, and durations. Detailed physical models of the EMU spacesuit and the ISS are included and tailored for each EVA analysis. Two types of MMOD risk are included: (1) Penetration, and (2) Catastrophic. Penetration risk is for any size leak in the EMU suit. Catastrophic risk is a subset of Penetration Risk and only includes penetrations that cause a 4mm diameter hole (or larger) in the pressure-maintaining “bladder” layer of the EMU suit. This size hole will exceed the ability of the EMU suit to compensate. The MMOD risk analyses also utilize the latest orbital debris environment and meteoroid environment models including additional transient factors to account for recent satellite break-ups and annual meteor storms. These additional factors and the associated increase in EVA MMOD risk are considered when scheduling EVAs to reduce EMU MMOD risk.

Dana M. Lear↗

A Review of International Space Station Extravehicular Activity Micrometeoroid and Orbital Debris Risk

Nearly 300 spacewalks have been conducted over the last 25 years to support the construction and maintenance of the International Space Station (ISS). During the nearly 2,000 hours of extra-vehicular activity (EVA), crew wore extra-vehicular mobility unit (EMU) “spacesuits” to help mitigate hazards of the space environment including impacts from micrometeoroid and orbital debris (MMOD) particles. The National Aeronautics and Space Administration (NASA) conducts detailed EMU MMOD risk analyses as part of the ISS EVA review and approval process. This paper provides a general historical overview of the ISS EVA MMOD risks and the associated risk assessment process. The NASA Johnson Space Center (JSC) Hypervelocity Impact Technology (HVIT) Team produces the ISS EVA MMOD risk analyses using the Bumper MMOD risk analysis code in conjunction with detailed information about the EVA including crew member EVA work sites, crew translation paths, suit orientation, and durations. Detailed physical models of the EMU spacesuit and the ISS are included and tailored for each EVA analysis. Two types of MMOD risk are included: (1) Penetration, and (2) Catastrophic. Penetration risk is for any size leak in the EMU suit. Catastrophic risk is a subset of Penetration Risk and only includes penetrations that cause a 4mm diameter hole (or larger) in the pressure-maintaining “bladder” layer of the EMU suit. This size hole will exceed the ability of the EMU suit to compensate. The MMOD risk analyses also utilize the latest orbital debris environment and meteoroid environment models including additional transient factors to account for recent satellite break-ups and annual meteor storms. These additional factors and the associated increase in EVA MMOD risk are considered when scheduling EVAs to reduce EMU MMOD risk.

Dana M. Lear↗

Localization of Ad-Hoc Lunar Constellations in Communication Failure Modes for Distributed Spacecraft Autonomy

As lunar missions increase in complexity inspired by NASA’s Artemis Program, they will require reliable and sufficient capability of the Position, Navigation, and Timing (PNT) system to support their scientific objectives. In addition, NASA's Commercial Lunar Payload Services (CLPS) program initiates the proliferation of public and private exploration partnerships using small satellites from commercial and private organizations, expanding traditionally confined low Earth orbit to be used for missions beyond geosynchronous orbit (Zucherman et al., 2022). Therefore, the Lunar PNT system is also required to provide navigation services compatible with the smaller platforms being sent by the public and private sectors, like CubeSats. However, traditional approaches to deep space missions’ navigation based on ground radio facilities have difficulties in providing sufficient support for the increasing number of users and communication at a distance from the Earth (Kaplev et al., 2022). In particular, the existing Lunar navigation technologies such as weak signal global positioning system (GPS) and deep space network (DSN) are not able to ensure operations of the upcoming small-scale Lunar missions due to their limitations in localization performance as well as capacity aspects. Another way to provide Lunar PNT service is to create a dedicated Lunar global navigation satellite system (GNSS) constellation, like GNSS systems on Earth. Space agencies like NASA, ESA, and JAXA are now developing the lunar communications relay and navigation systems (LCRNS) and Lunar navigation satellite systems (LNSS). In their systems, satellites will be deployed in moon orbits to provide the communication, positioning, navigation, and timing (CPNT) service at the lunar south pole region where the Artemis base camp will be expected (Murata et al., 2022). Meanwhile, common challenges considered in lunar PNT research arise from poor geometry of the terrestrial GNSS satellites when seen from the lunar user, highly perturbed lunar orbits, and limitations in power, size, and cost of the equipment on lunar satellites (Iiyama et al., 2023). It is also not clear if there will be enough Lunar users to support the cost and resources this would require as the Low-cost surface missions may not be able to support the large power, mass, and weight requirements that these navigation solutions entail (Niemoeller et al., 2022). As an alternative, existing Lunar science and exploration assets could be used to create a low-cost, autonomous, ad-hoc, and on-demand mission-centric Lunar PNT swarm capable of providing PNT services to these low-cost lunar missions (Hagenau et al., 2021). Introducing the non-dedicated and ad-hoc Lunar navigation constellation gives a way to provide PNT services on-demand. The non-dedicated swarm assets of Lunar constellations are designed to localize themselves with minimal interaction with Earth by adding cooperative autonomous localization to lunar missions, freeing up valuable bandwidth and ground segment resources. An autonomous localization of Lunar constellations is based on the concept of the decentralized PNT system with a distributed extended Kalman filter (DEKF) approach to state estimation for minimal onboard operating costs. In the distributed data processing algorithm, computation is broken down and assigned to each satellite, resulting in a considerably decreased computational amount while maintaining the accuracy of the orbit ephemeris and clock offsets as the result of centralized data processing (Wen et al., 2019). The DEKF requires spacecraft to perform two-way ranging operations with each other to communicate simultaneously, leveraging neighbor two-way intersatellite link (ISL) measurements such as pseudoranges to, and relative velocities between, visible satellites as sensor values (Frank et al., 2021). The Lunar autonomous PNT simulation (LAPS) demonstrated the feasibility of orbital asset localization among ad-hoc Lunar small-sat constellations based on the DEKF in Hagenau et al. (2021) and evaluated the matching algorithm proposed by Frank et al. (2021) in scheduling position estimation updates. In previous papers, all assets and measurements are assumed to be always available without consideration of the impact of intermittent and permanent communication failure. This study presents localization performance with increasing levels of network degradation for swarm assets and users to demonstrate the robustness of the decentralized Lunar PNT service in more realistic scenarios. Main issues arising from communication failure include spacecraft permanent or transient loss, antenna failures, message delays, etc. We tested four possible reasons for network degradation for 7 days in 21 satellites frozen with an altitude of 5500 km, evenly spaced around 3 circular, 40 inclination orbital planes where each spacecraft has two directional antennas. As anchor nodes with an independent estimate of their position are required in the DEKF approach, two ground nodes in each pole and one node in the gateway were implemented in the simulation. First, the most probable failure scenario involves the loss of a single spacecraft due to solar interference and technical malfunctions of the assets. Losing the availability of a single spacecraft means losing the two-way ISL measurement of the asset in the DEKF update. In order to provide the best possible quality of PNT service with limited time and resources, the distributed Lunar constellations must schedule the communication activities. The scheduler leverages mixed-integer linear programming (MILP) for the coordination and scheduling of the desired “as-needed” localization service (Niemoeller et al., 2022). We assume the scheduler has completely excluded the spacecraft information before the DEKF update in the failure scenario. When a random spacecraft has been turned off at a specific time, the robustness of the autonomous Lunar PNT system is evaluated. The simulation results give an 11.5% degradation in median position accuracy compared to the idealized performance excluding the asset loss. Second, a large number of assets may vanish due to major hardware problems or meteor strikes around the moon. A multiple spacecraft loss can degrade the localization performance very fast by losing the communication ability to do cross-plane measurements and in-plane measurements in a 3-plane constellation. When the matching-based scheduler is aware of ISL availability, we investigate a large number of in-plane and cross-plane asset vanishments both in close proximity and equally spaced throughout the orbital plane. According to the simulations, the loss of in-plane measurements gives 40.2% degradation while cross-plane measurements degrade 50.5% of asset localization performance among available assets. Therefore, it is concluded that cross-plane measurements are more important in improving the position estimation accuracy. Third, spacecraft failure information can be lost due to the internal message delay, resulting in the DEKF update scheduler to solve the matching problem with unavailable assets. The DEKF update cycle is comprised of network setup, communication, and computations where a global broadcast network and a 2-way ISL network setup take 6 minutes in total (Frank et al., 2021). Once the broadcast network successfully transmits and receives information, a random spacecraft may lose its availability right before solving the matching problem. This means the matching solution is no longer optimal, resulting in degradation in the localization performance. A numerical assessment shows the matching-based scheduler with knowing failure holds 11.5% of position accuracy degradation, whereas the scheduler without knowing failure gives 34% degraded localization performance without asset loss. Fourth, a transient loss of a single or multiple spacecraft may occur due to their antenna outages. After losing the two-way ISL availability for a few DEKF update cycles, the availability of spacecraft can easily be recovered as their states have been independently updated using measurements from anchor nodes. It is likely that the longer failure will result in worse localization performance. We have tested the transient failure of a random single asset for 30 min in the simulation, which is losing 3 update cycles in the DEKF system. From the simulation results, the position accuracy has been degraded to 4.84% which is better than the degraded localization performance of 11.5% from the permanent loss scenario among available assets. In conclusion, the autonomous Lunar PNT system based on the DEKF approach shows the ability to maintain resilience and robustness in the possible communication failure scenarios, ensuring that localization accuracy is preserved across various network degradation and outages. Future studies on investigating user localization performance near the South Pole and the broadcast network system will be continued in the following months.

Yeji Kim↗

Localization of Ad-Hoc Lunar Constellations in Communication Failure Modes for Distributed Spacecraft Autonomy

As Lunar missions increase in complexity, inspired by NASA’s Artemis Program, they will require reliable and sufficient Position, Navigation, and Timing (PNT) capability to support the upcoming Lunar users. The navigation service should also be compatible with the smaller platforms, like CubeSats, being sent by the public and private sectors. A non-dedicated, ad-hoc Lunar navigation constellation can provide PNT services on-demand using the non-dedicated swarm assets. Swarm members cooperatively and autonomously localize themselves with minimal interaction from Earth, freeing up valuable bandwidth and ground segment resources. The autonomous localization of Lunar constellations utilizes neighbor two-way intersatellite link (ISL) measurements in a distributed extended Kalman filter (DEKF) system to minimize operating costs. Because the decentralized Lunar PNT system relies on relay communication amongst the agents, network failures or loss of assets among ad-hoc Lunar constellations may impact localization performance. This study presents an evaluation of localization performance under increasing levels of network degradation. A simulation of an ad-hoc Lunar PNT swarm is augmented to include system faults and the impacts of intermittent and permanent failures on localization performance are evaluated. We investigate three potential causes of network degradation: single spacecraft loss, multiple spacecraft loss, and antenna failure. The numerical assessments from the simulation show that the LPNT system under study, based on an autonomous decentralized concept of operation, is highly robust and resilient to communication failures. Minor faults, such as single spacecraft loss, solar interference, technical malfunctions, message delays, and antenna outages, have minimal impact on state estimation, with only a 4.47% and 3.75% degradation in median position error for assets and a representative ground user, respectively, compared to an ideal communication scenario. However, major faults, such as hardware failures or meteor strikes leading to the loss of multiple spacecrafts, are more concerning. The permanent loss of three spacecraft results in a more severe performance degradation, with median position error increasing by 23.3% for assets and 11.7% for a representative ground user, despite the Lunar PNT system remaining functional.

Yeji Kim↗

Isotopic evidence for the infiltration of mantle and metamorphic CO2-H2O fluids from below in faulted rocks from the San Andreas Fault System

To characterize the origin of the fluids involved in the San Andreas Fault (SAF) system, we carried out an isotope study of exhumed faulted rocks from deformation zones, vein fillings and their hosts and the fluid inclusions associated with these materials. Samples were collected from segments along the SAF system selected to provide a depth profile from upper to lower crust. In all, 75 samples from various structures and lithologies from 13 localities were analyzed for noble gas, carbon, and oxygen isotope compositions. Fluid inclusions exhibit helium isotope ratios ({sup 3}He/{sup 4}He) of 0.1-2.5 times the ratio in air, indicating that past fluids percolating through the SAF system contained mantle helium contributions of at least 35%, similar to what has been measured in present-day ground waters associated with the fault (Kennedy et al., 1997). Calcite is the predominant vein mineral and is a common accessory mineral in deformation zones. A systematic variation of C- and O-isotope compositions of carbonates from veins, deformation zones and their hosts suggests percolation by external fluids of similar compositions and origin with the amount of fluid infiltration increasing from host rocks to vein to deformation zones. The isotopic trend observed for carbonates in veins and deformation zones follows that shown by carbonates in host limestones, marbles, and other host rocks, increasing with increasing contribution of deep metamorphic crustal volatiles. At each crustal level, the composition of the infiltrating fluids is thus buffered by deeper metamorphic sources. A negative correlation between calcite {delta}{sup 13}C and fluid inclusion {sup 3}He/{sup 4}He is consistent with a mantle origin for a fraction of the infiltrating CO{sub 2}. Noble gas and stable isotope systematics show consistent evidence for the involvement of mantle-derived fluids combined with infiltration of deep metamorphic H{sub 2}O and CO{sub 2} in faulting, supporting the involvement of deep fluids percolating through and perhaps weakening the fault zone. There is no clear evidence for a significant contribution from meteoric water, except for overprinting related to late weathering.

54 ENVIRONMENTAL SCIENCES↗

STRUCTURAL CONTROLS OF THE EMERSON PASS GEOTHERMAL SYSTEM, NORTHWESTERN NEVADA: CHARACTERIZATION OF A "BLIND" SYSTEM

Detailed geologic analyses have elucidated the kinematics, stress state, structural controls, and past surface activity of a blind geothermal system in Emerson Pass on the Pyramid Lake Paiute Reservation, western Nevada. The Emerson Pass area resides near the boundary of the Basin and Range and Walker Lane provinces and at the western edge of a broad left step or relay ramp between the north- to north-northeast-striking, west-dipping, Fox and Lake Range normal faults. The step-over provides a structurally favorable setting for deep circulation of meteoric fluids. Strata in the area are comprised of late Miocene to Pliocene sedimentary rocks and the middle Miocene Pyramid sequence mafic to intermediate volcanic rocks, all overlying Mesozoic metasedimentary and intrusive rocks. A thermal anomaly was discovered in Emerson Pass by use of 2-m temperature surveys deployed within a structurally favorable setting and proximal to surface features indicative of geothermal activity. The 2-m temperature surveys define a north-south elongate thermal anomaly that has a maximum recorded temperature of ~60°C and resides on a north- to north-northeast-striking normal fault. Although the active geothermal system is expressed solely as a soil heat anomaly, late Pleistocene travertine and tufa mounds, chalcedonic silica/calcite veins, and silica cemented Pleistocene lacustrine gravels indicate a robust geothermal system was active at the surface in the recent past. The geothermal system is controlled primarily by the broad step-over between two major range-bounding normal faults. In detail, the system likely results from enhanced permeability generated by the intersection of two oppositely dipping, southward terminating north- to north-northwest-striking (Fox Range fault) and north-northeast-striking normal faults. Structural complexity and spatial heterogeneities of the strain and stress field have developed in the step-over region, but kinematic data suggest a west-northwest-trending (~280° azimuth) extension direction. Therefore, geothermal activity in the Emerson Pass area is probably hosted on north-to north-northeast striking normal faults.

15 GEOTHERMAL ENERGY↗

Evapotranspiration Within the Groundwater Model Domain of the Tuba City, Arizona, Disposal Site Interim Report

The revised groundwater model includes estimates of evapotranspiration (ET). The types of vegetation and the influences of ET on groundwater hydrology vary within the model domain. Some plant species within the model domain, classified as phreatophytes, survive by extracting groundwater. ET within these plant communities can result in a net discharge of groundwater if ET exceeds precipitation. Other upland desert plants within the model domain survive on meteoric water, potentially limiting groundwater recharge if ET is equivalent to precipitation. For all plant communities within the model domain, excessive livestock grazing or other disturbances can tip the balance to a net groundwater recharge. This task characterized and mapped vegetation within the groundwater model domain at the Tuba City, Arizona, Site, and then applied a remote sensing algorithm to estimate ET for each vegetation type. The task was designed to address five objectives: 1. Characterize and delineate different vegetation or ET zones within the groundwater model domain, focusing on the separation of plant communities with phreatophytes that survive by tapping groundwater and upland plant communities that are dependent on precipitation. 2. Refine a remote sensing method, developed to estimate ET at the Monument Valley site, for application at the Tuba City site. 3. Estimate recent seasonal and annual ET for all vegetation zones, separating phreatophytic and upland plant communities within the Tuba City groundwater model domain. 4. For selected vegetation zones, estimate ET that might be achieved given a scenario of limited livestock grazing. 5. Analyze uncertainty of ET estimates for each vegetation zone and for the entire groundwater model domain.

54 ENVIRONMENTAL SCIENCES↗

Update on Production Chemistry of the Roosevelt Hot Springs Reservoir

Analyses of production fluids from the Roosevelt Hot Springs reservoir were acquired from well sampling campaigns in 2015 and 2016. The resulting data have been recalculated to reservoir conditions by correcting for effects of steam loss, and the values are compared to legacy data from earlier reports to quantify changes with time in response to fluid production. The reservoir composition is similar to that at the start of reservoir exploitation, having near neutral pH, total dissolved solids of 7000-10,000 mg/kg, and ionic ratios of Cl/HCO3 ~50-100, Cl/SO4 ~50-100, and Na/K ~4-5. Cation, gas and silica geothermometers indicate a range of equilibration temperatures between 240 and 300 °C, but quartz-silica values are most closely consistent with measured reservoir temperatures and well enthalpies. The largest change in fluid composition is observed in well 54-3. The fluid has evolved from being fed by a single phase liquid to a twophase mixture of steam and liquid due to pressure draw down. The fluid also shows a 25% increase in reservoir chloride and a ~20° C decrement of cooling related to mixing with injected brine. The other production wells also show increase in chloride and decrease in temperature, but these changes diminish in magnitude with distance from injection well 14-2. Stable isotope compositions indicate that the reservoir water is largely meteoric in origin, having been modified by hydrothermal waterrock interaction. The water has also become progressively enriched in isotopic values in response to steam loss and mixing of injectate. N2-Ar-He and helium isotope ratios indicate a deep magmatic source region that probably supplies the heat for the hydrothermal system, consistent with recent Quaternary volcanism in the Mineral Mountains.

Simmons, Stuart↗

3D Time-Lapse Geophysical Imaging Evaluation of Contaminant Migration at the Hanford BY Cribs Site

Changes in bulk electrical conductivity are governed in large part by two diagnostic parameters concerning the state of vadose zone contamination: saturation and pore fluid conductivity. As a robust, remote, non-invasive, three-dimensional, and scalable imaging tool, time-lapse electrical resistivity tomography (ERT) can provide extensive diagnostic information concerning vadose zone contaminant distribution and migration by imaging changes in bulk electrical conductivity. We demonstrate long-term surface ERT monitoring of a ~70-m-thick contaminated vadose zone to investigate whether rising groundwater nitrate levels are caused by unanticipated vadose zone flux. A three-dimensional time-lapse image spanning 10 years (2007-2017) reveals the impacts of meteoric surface infiltration events, but ultimately supports the adequacy of current conceptual understanding by indicating that rising nitrate levels are not sourced in the vadose zone.

resisitivity, geophysics, contamination, monitorin↗

Using Light for Research at the Advanced Light Source

Ziheng Yao, ALS Doctoral Fellow in Residence and a Ph.D. student at Stony Brook University, will share how he uses infrared light at the ALS to study a range of samples, including battery and biological materials, meteors, and more. The Advanced Light Source is a DOE Office of Science User Facility. The International Day of Light is recognized by the United Nations Educational, Scientific and Cultural Organization (UNESCO).

36 MATERIALS SCIENCE↗

A Non-Proliferating Fuel Cycle: No Enrichment, Reprocessing or Accessible Spent Fuel - 12375

Current fuel cycles offer a number of opportunities for access to plutonium, opportunities to create highly enriched uranium and access highly radioactive wastes to create nuclear weapons and 'dirty' bombs. The non-proliferating fuel cycle however eliminates or reduces such opportunities and access by eliminating the mining, milling and enrichment of uranium. The non-proliferating fuel cycle also reduces the production of plutonium per unit of energy created, eliminates reprocessing and the separation of plutonium from the spent fuel and the creation of a stream of high-level waste. It further simplifies the search for land based deep geologic repositories and interim storage sites for spent fuel in the USA by disposing of the spent fuel in deep sub-seabed sediments after storing the spent fuel at U.S. Navy Nuclear Shipyards that have the space and all of the necessary equipment and security already in place. The non-proliferating fuel cycle also reduces transportation risks by utilizing barges for the collection of spent fuel and transport to the Navy shipyards and specially designed ships to take the spent fuel to designated disposal sites at sea and to dispose of them there in deep sub-seabed sediments. Disposal in the sub-seabed sediments practically eliminates human intrusion. Potential disposal sites include Great Meteor East and Southern Nares Abyssal Plain. Such sites then could easily become international disposal sites since they occur in the open ocean. It also reduces the level of human exposure in case of failure because of the large physical and chemical dilution and the elimination of a major pathway to man-seawater is not potable. Of course, the recovery of uranium from sea water and the disposal of spent fuel in sub-seabed sediments must be proven on an industrial scale. All other technologies are already operating on an industrial scale. If externalities, such as reduced terrorist threats, environmental damage (including embedded emissions), long term care, reduced access to 'dirty' bomb materials, the social and political costs of siting new facilities and the psychological impact of no solution to the nuclear waste problem, were taken into account, the costs would be far lower than those of the present fuel cycle. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effects of Rangeland Evapotranspiration on Groundwater Recharge, Discharge, and Flow at the Tuba City, Arizona, Disposal Site - 17159

The US Department of Energy Office of Legacy Management is modeling groundwater flow and contaminant transport at a former uranium mill site near Tuba City, Arizona. A goal is to project groundwater travel times and flow volumes between the former mill site and Moenkopi Wash, a down-gradient stream. Aquifer recharge and discharge are sensitive model parameters; however, assigning representative rates is inexact and involves approximations. We applied a remote sensing algorithm to determine spatially variable evapotranspiration (ET), precipitation recharge, and groundwater discharge rates for use in a large scale groundwater flow model for the site. ET is the combination of evaporation and plant transpiration from soil and groundwater. We estimated landscape-scale ET over a 13-year period (2000 to 2012) for distinct plant communities within a 3531-hectare groundwater model domain (GMD), and then evaluated effects of ET on groundwater recharge and discharge within the GMD. Our empirical algorithm was derived from ground ET measurements, multispectral satellite imagery, and temperature data. Groundwater recharge or discharge rates were calculated for each plant community (or ET Zone) as the difference between precipitation (PPT) and ET rates. Recharge occurred in plant communities where PPT exceeded ET; discharge occurred where ET exceeded PPT. Estimates of groundwater recharge rates for upland plant communities that survive on meteoric water ranged from 0 to 88 mm yr{sup -1}. Estimates of groundwater discharge for phreatophyte plant communities ranged from 23 mm yr{sup -1} to 150 mm yr{sup -1}. Phreatophytes are plants that survive by extracting groundwater. Zero recharge occurred in plant communities where ET rates equaled annual average precipitation. An increase in groundwater recharge (PPT > ET) was associated with past land disturbances and heavy livestock grazing in upland areas. Groundwater discharge (ET > PPT) was highest in riparian phreatophyte communities, but lower than optimal in upland phreatophyte communities impacted by heavy grazing. Protecting phreatophyte communities from grazing at Tuba City could potentially increase ET from 153 mm yr{sup -1} to at least 500 mm yr{sup -1}. The validity of using the ET algorithm to estimate recharge and discharge was evaluated by comparing the net volumetric outflow rate for the model domain with base flow measurements collected from Moenkopi Wash. Modeled outflow approximated measured flow gains in the Wash, increasing our confidence in the ET algorithm and in the model. Results suggest that rangeland management practices that reduce groundwater recharge rates and increase groundwater discharge rates should be evaluated as part of an overall groundwater remediation strategy. (authors)

54 ENVIRONMENTAL SCIENCES↗

3D Time-Lapse Geophysical Imaging Evaluation of Contaminant Migration at the Hanford BY Cribs Site - 18504

Changes in bulk electrical conductivity are governed in large part by two diagnostic parameters concerning the state of vadose zone contamination: saturation and pore fluid conductivity. As a robust, remote, non-invasive, three-dimensional, and scalable imaging tool, time-lapse electrical resistivity tomography (ERT) can provide extensive diagnostic information concerning vadose zone contaminant distribution and migration by imaging changes in bulk electrical conductivity. We demonstrate long-term surface ERT monitoring of a ∼70-m-thick contaminated vadose zone to investigate whether rising groundwater nitrate levels are caused by unanticipated vadose zone flux. A three-dimensional time-lapse image spanning 10 years (2007-2017) reveals the impacts of meteoric surface infiltration events, but ultimately supports the adequacy of current conceptual understanding by indicating that rising nitrate levels are not sourced in the vadose zone. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗