Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Light sources”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

SAN-Based Block Polymers as a Platform for Manufacturing Strong Isoporous Membranes

Ultrafiltration (UF) membranes are ubiquitous in water purification and bioprocessing. However, co-designing their mechanical and transport properties remains challenging because of the broad pore size distributions at the surface and within the bulk that result from nonsolvent-induced phase separation (NIPS) – their typical manufacturing process. These distributions influence the hydrodynamic resistance to water flow and the stress concentrations around the pores. Developing advanced UF membranes requires innovative molecular designs that offer control over the surface and bulk pores, as well as the mechanical properties of the load-bearing, polymer. Here, we introduce a platform for designing UF membranes by leveraging solution self-assembly of block polymers and chain architectures with pendant polar groups. The block polymers consist of a poly(styrene-co-acrylonitrile) hydrophobic block, which is known for its strength, and a poly(4-vinyl pyridine) hydrophilic block, which drives solution self-assembly. We focus on a series of block polymers with constant molecular weight, M n ≈ 115 kDa, SAN fraction, 75 wt.%, and varying acrylonitrile content, 0 to 40 mol%, to demonstrate that: (i) RAFT dispersion copolymerization of acrylonitrile and styrene provides a facile route to synthesize strong block polymers, (ii) incorporation of acrylonitrile into the hydrophobic block enhances membrane strength by facilitating chain entanglements and dipole-dipole interactions, and (iii) acrylonitrile alters the balance between membrane permeance and rejection, even when the membranes feature similar surface and bulk pores. Overall, our results provide insights into the molecular design of UF membranes with enhanced mechanical and separation properties, contributing to the development of materials for water and energy technologies.

deformation↗
DOE OSTI2025

Distinct Surface and Bulk Morphology Due to Solvent Additive Effects in PM6 Conjugated Polymer Films

Depth dependent molecular orientation and crystalline structure in conjugated polymer thin films is critical for organic electronic device performance and is affected by solvent additive choice during processing. Here, in this work, we focus on the electron donor polymer PM6 and uncover how the solvent additive 1-chloronaphthalene (CN) affects the molecular orientation and the crystalline structure with near edge X-ray absorption fine structure (NEXAFS) spectroscopy and grazing-incidence wide-angle X-ray scattering (GIWAXS), respectively. By quantitatively comparing molecular and crystallite orientations, we find that CN induces distinct surface and bulk morphologies. The polymer conjugated plane orientation at the surface is unaffected by CN, while this orientation is strongly affected in the bulk. Further, we find differences in surface vs bulk crystalline coherence lengths and relative degrees of crystallinity. These insights help provide links between solvent additive and device performance and demonstrate the strengths of a quantitative approach for characterizing organic thin film morphology.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Multinuclear Solid-State NMR and NMR Crystallography of Solid Forms of Creatine and Creatinine

Creatine is a performance-enhancing supplement with two widely available commercial solid forms, namely, creatine monohydrate (creatine·H 2 O) and creatine HCl, the latter of which does not have a reported crystal structure. Moreover, commercial formulations of creatine may contain creatinine, an undesired impurity phase resulting from the self-cyclization of creatine during manufacturing. Therefore, reliable methods for characterizing the different solid forms of creatine and detecting the presence of creatinine are essential. Herein, we address these challenges using 13 C, 15 N, and 35 Cl solid-state NMR (SSNMR) spectroscopy to obtain distinct spectral fingerprints for creatine·H 2 O and creatine HCl, along with creatinine and creatinine HCl. The acquisition of these SSNMR spectra offers a robust approach for both the rapid characterization of each solid form and the detection of the impurity phases. Additionally, quadrupolar NMR crystallography-guided crystal structure prediction (QNMRX-CSP) was applied for the de novo crystal structure determination of creatine HCl, which was validated by the subsequently determined single-crystal X-ray diffraction (SCXRD) structure. Finally, to investigate the relationship between NMR parameters and structural features, 13 C and 15 N chemical shifts and 35 Cl electric field gradient (EFG) tensors were computed from geometry-optimized structures of the four solid forms by using dispersion-corrected DFT-D2* methods. Finally, this integrative approach offers a powerful framework for advancing the structural understanding and quality control of creatine-based supplements and next-generation formulations, as well as a wide range of other solid pharmaceuticals and nutraceuticals.

NMR↗
DOE OSTI2025

Revealing Progressive Degradation of Cobalt Oxide Nanoparticles During Thermochemical Redox Cycling via Operando STEM-EELS

Metal oxides are promising materials for long-duration thermochemical energy storage. Efforts to characterize their reaction kinetics, conversion rate, and morphological evolution during thermochemical cycling have largely focused on bulk and microscale measurements. However, the design of nanostructured metal oxides could improve the reaction reversibility and kinetics, warranting the development of platforms to investigate how these materials behave at the nanoscale. Here, we demonstrate the use of correlative, time-resolved electron energy loss spectroscopy and imaging in an environmental transmission electron microscope for studying the thermochemical cyclability of cobalt oxide nanoparticles with high spatial and temporal resolution. The spectroscopic data reveal a striking decrease in reaction kinetics after the first cycle, resulting from sintering-driven nanostructural densification. Comparison between cycling in humid and dry air shows that atmospheric conditions can modulate reaction transition temperatures but have limited effects on sintering over multiple cycles, suggesting long-term durability will instead rely on synthetic and/or nanostructural modifications.

25 ENERGY STORAGE↗
DOE OSTI2026

The Complexation Properties of Self-Defensive Microgel-Modified Antimicrobial Surfaces

The complexation of cationic antimicrobials with polyanionic microgels on a biomaterial surface can render that surface self-defensive against bacteria by killing those bacteria which physically contact the antimicrobial-loaded microgels. This killing has been attributed to the contact-driven transfer of antimicrobial from a microgel to a challenging bacterium, though much remains unknown about this process. Here, in this study, we use a combination of experiments and computational modeling to identify key aspects of the complexation phenomena which influence the self-defensive properties. We synthesize poly(acrylic acid) (PAA) microgels (∼2–5 μm diameter) via membrane emulsification and electrostatically deposit them onto polycaprolactone (PCL) coupons or onto glass to form a discontinuous submonolayer. Subsequent microgel loading with colistin or with Sub5 antimicrobial peptide (AMP) causes microgel deswelling. Under physiological conditions Sub5 remains stably sequestered whereas colistin is quickly released. Coarse-grained molecular dynamics (CGMD) simulations confirm stronger Sub5/PAA complexation. CGMD calculations also indicate that Sub5 forms dimers and higher-order structures, a prediction confirmed experimentally by Small-Angle X-ray Scattering (SAXS). Supramolecular structure entropically enhances the complexation strength because of enhanced counterion release per complexation event, and this finding can help identify other antimicrobials well suited for such a nonelutive yet self-defensive strategy. CGMD simulations also show that Sub5 has a higher complexation strength with the Staphylococcus aureus membrane than it does with PAA, confirming that there is a thermodynamic driving force for antimicrobial transfer. Such self-defensive surfaces significantly reduce S. aureus colonization (over 90% reduction relative to unmodified controls) in an in vitro hematogenous contamination model and remain cyto-compatible as evidenced by mesenchymal stem cell spreading and proliferation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Impact of Arsenic- and Indium-Terminated InGaAs Stressors on Carrier Confinement, Strain, Defects, and Transport Properties of Tensile-Strained Ge

Device-quality tensile-strained Ge (ε-Ge) grown on a large bandgap semiconductor with superior electrical and optical carrier confinement is essential for group-IV-based optoelectronics. Properties of ε-Ge active layers synthesized on In 0.24 Ga 0.76 As buffers with two different surface terminations─arsenic-rich and indium-rich─were experimentally demonstrated, highlighting the factors not considered in theoretical calculations. High-resolution X-ray diffraction and Raman spectroscopy analyses of these ε-Ge/In 0.24 Ga 0.76 As heterostructures confirmed the fully strained (1.6%) and partially relaxed (0.82%) nature of the ε-Ge bonded with arsenic-terminated (Ge As-terminated ) and indium-terminated (Ge In-terminated ) In 0.24 Ga 0.76 As stressors, respectively. High-resolution cross-sectional transmission electron microscopy showed a coherent, sharp, and fully strained ε-Ge/In 0.24 Ga 0.76 As heterointerface in the Ge As-terminated heterostructure, whereas microtwin defects were present in the Ge In-terminated heterostructure. These heterostructures were further characterized by evaluating the minority carrier lifetimes, high for Ge As-terminated (525 ns) and low for Ge In-terminated (69 ns), using the photoconductive decay technique. Moreover, band alignment was constructed using X-ray photoelectron spectroscopy, where the Ge As-terminated heterostructure revealed that both holes and electrons were confined within the ε-Ge active layer as a type-I band alignment with ΔE V, As-terminated = 0.22 eV and ΔE C,As-terminated = 0.38 eV. On the other hand, the Ge In-terminated heterostructure exhibited a type-II band alignment with ΔE V,In-terminated = – 0.02 eV and ΔE C,In-terminated = 0.53 eV. Furthermore, the magnetotransport properties revealed high mobility (321 cm 2 /(V s)) with single-electron transport in Ge As-terminated heterostructure and low mobility (3.34 cm 2 /(V s)) with multihole transport in the Ge In-terminated heterostructure. Therefore, preferring the ε-Ge on the arsenic-rich surface of In 0.24 Ga 0.76 As stressor over the indium-rich surface during material synthesis offers device-quality materials with high carrier lifetime and superior carrier confinement, which can provide an opportunity to fabricate efficient group-IV-based optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Shifting Valencies and Magnetic Responses in La-Based High-Entropy Oxide Perovskite Thin Films with Variable Mn Presence

Chemical disorder in compositionally complex perovskite oxides generates a broad distribution of exchange pathways and spin states, but the microscopic origin and spatial homogeneity of the resulting magnetic phases remain debated. Here, we tune the Mn fraction (x = 0.2–0.6) in epitaxial La(Cr, Mn, Fe, Co, Ni)O3 thin films and resolve the coupled evolution of valence, spin state, and magnetism using element-specific x-ray absorption spectroscopy and x-ray magnetic circular dichroism (XMCD). Mn enrichment drives an internal redistribution of charge, in which Mn evolves toward a Mn3+-rich mixed valence, while Co converts from predominantly Co3+ to high-spin Co2+. This valence/spin-state coupling amplifies the Mn- and Co-derived ferromagnetic response by nearly an order of magnitude while increasing the magnetic onset temperature to at least 250 K, whereas Fe and Cr remain essentially trivalent with weak dichroism. Depth-resolved low-energy muon spin spectroscopy (LE-μSR) shows magnetic homogeneity through the film thickness, with a secondary relaxation maximum near 25 K indicating a low-temperature dynamical crossover consistent with frustrated magnetism in a strongly disordered spin lattice.

Miertschin, Duncan [Baylor University]↗
DOE OSTI2025

Interplay Between Metastability and Mechanically Induced Structural Instability in CsPbBr 3 Photovoltaic Perovskite

An atomic-level understanding of the underlying structural metastability is still absent in halide perovskite photovoltaic systems. Focusing on the model material CsPbBr 3 , the impact of mechanically induced atomic structure alteration is elucidated through structural modeling and X-ray diffraction measurements. Sudden Cs–Br bond breaking drives the system metastability, where the first-order transition arises from cation-halide bond strain relief by severing the corner connectivity of the PbBr 6 units. The pressure–volume and entropy terms govern the Gibbs free-energy landscape in halide perovskites. In conclusion, metastability is revealed as a critical factor limiting the performance of lead halide perovskites under extreme but natural environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Site-Selective Modification of Lanthanum Oxychloride to Modulate Halide-Ion Conduction

Design principles for solid-state halide-ion conduction remain poorly defined despite the increasing importance of halide ions as charge carriers in a variety of energy storage and electrochemical computing technologies. Here, we employ a siteselective modification strategy in which aliovalent cations are preferentially introduced at the La 3+ crystallographic site of LaOCl in the 2c Wyckoff position, enabling controlled generation of chloride vacancies and modification of lattice dynamics to enhance chloride-ion conductivity. Aliovalent substitution of La 3+ with Mg 2+ , Ca 2+ , and Sr 2+ generates charge-compensating Cl vacancies while preserving the matlockite crystal structure. X-ray excited optical luminescence measurements with Dy 3+ as a reporter chromophore evidence vacancy-derived midgap electronic states and an extended energy range of radiation-less Auger electron emission corresponding to substantial modification of electronic structure and local electrostatic potentials. Ca alloying at 8−10 at. % increases the chloride-ion conductivity by three- to 4 orders of magnitude as compared to unalloyed LaOCl, whereas comparable amounts of Sr- and Mg-alloying in LaOCl imbue less pronounced conductivity enhancements. Temperature-dependent Raman spectroscopy measurements reveal that Ca- and Sr-alloying substantially soften the La−Cl sublattice and yield a more compliant crystal lattice that can deform to accommodate Cl-ion migration. Structure solutions derived from Rietveld refinements to powder Xray diffraction reveal larger O−La−Cl bond-angle deviations and enhanced out-of-plane cation displacements for Ca- and Sr-alloyed compositions as compared to Mg-alloyed LaOCl. Such local distortions enhance chloride-ion mobility by reshaping and flattening vacancy migration energy landscapes and by modulating lattice dynamics governing anion conduction. We further illustrate that coalloying of Ca with Mg and Sr induces a nonmonotonic conductivity−defect stoichiometry relationship that can be rationalized based on cooperative interactions. Together, these results establish site-selective aliovalent alloying of LaOCl as an effective route to halide-ion solid electrolytes and provide broadly generalizable design principles for site-selective modification to induce vacancy formation and lattice softening to engender facile anion transport

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Establishing the Stability of Cross-Linked Poly(ethylene oxide) Blended with Poly(pentyl malonate) against Lithium Metal Anodes

This work focuses on an electrolyte obtained by infusing linear poly(pentyl malonate) (PPM) chains into cross-linked poly(ethylene oxide) (PEO). A lithium salt is added to enable ion transport. Obtaining this electrolyte is only possible because PPM is miscible with PEO irrespective of salt concentration. The properties of this electrolyte are compared against two benchmarks: an electrolyte obtained by infusing linear PEO into cross-linked PEO and cross-linked PEO with no added linear polymer. Measurements of storage moduli and ion transport efficacies are found to be similar across the three electrolytes, suggesting similar stability behavior against lithium metal anodes, based on current theoretical models. Instead, the PPM infused electrolyte outperforms the other two electrolytes. In the cycling tests, the current supported by the PPM infused electrolyte was a factor of 20 higher than that of the PEO infused electrolyte and a factor of 4 higher than that of the cross-linked PEO electrolyte. In the unidirectional plating experiments, the other two electrolytes fail after about 4 h or less, while the PPM containing electrolyte did not fail during the 140 h testing period. Insight into the nature of failure modes was obtained using synchrotron hard X-ray microtomography.

Gido, Lily [University of California, Berkeley]↗
DOE OSTI2025

Comparative Study of Vinylene Carbonate and Lithium Difluoro(oxalate)borate Additives in a SiO x /Graphite Anode Lithium-Ion Battery in the Presence of Fluoroethylene Carbonate

The SiO x /graphite composite is recognized as a promising anode material for lithium-ion batteries (LIBs), owing to the high theoretical capacity of SiO x combined with the excellent stability of graphite. However, the inherent disadvantage of volume expansion in silicon-based anodes places significant challenges on the solid electrolyte interphase (SEI) and severely degrades the electrochemical performance. Rational formulation of electrolyte, including its additives, is crucial in accommodating and optimizing the composition of the SEI and enhancing the cell performance. In this work, we present a comparative study of vinylene carbonate (VC) and lithium difluoro(oxalate)borate (LiDFOB) additives combined with fluoroethylene carbonate (FEC) in the electrolyte for SiO x /graphite∥LiNi 1–x–y–z Co x Mn y Al z O 2 full cells. VC outperformed LiDFOB as an additive, delivering higher capacity cycling, higher Coulombic efficiency, and better cycle stability up to 400 cycles. XPS and impedance analyses reveal that LiDFOB contributed to SEI/CEI with both a lower proportion of LiF and a higher proportion of poly(VC), which tended to produce higher cell impedance. XRD and XANES further indicated that using the LiDFOB additive, the NCMA cycled to a shallower degree than that of the VC additive. Although the VC additive maintained a higher capacity up to 400 cycles, microstrain and SEM analyses show a higher strained NCMA along with clear evidence of cracking over the surface of the NCMA particle in VC-based electrolyte but not in LiDFOB. In conclusion, this suggests that the negative influence of LiDFOB at the anode (inferior SEI) supersedes the negative impact of both a cracked NCMA and a deeper cycled NCMA and SiO x -based anode.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Single Metal Atom Catalysts Prepared by Diluted Atomic Layer Deposition

The scalable and facile preparation of single-atom catalysts remains a critical challenge. Here, in this study, we introduce diluted atomic layer deposition (DALD), a unique approach for synthesizing supported metal catalysts with precisely tunable loadings. Unlike conventional metal deposition by ALD which uses pure metal precursors, DALD employs a diluted precursor mixture, combining organometallic precursors with the corresponding free ligand in controlled ratios. The method enables precise control over metal loadings, allowing the synthesis of structures ranging from nanoparticles to isolated single atoms, as exemplified by Ir, Rh, and Pt on high-surface-area γ-Al 2 O 3 . With its inherent simplicity and exceptional efficiency in metal precursor utilization, DALD represents a highly scalable strategy, unlocking opportunities for integrating single-atom catalysts into industrial processes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Structure of Layers Formed by [2-(3,6-Disubstituted-9 H -carbazol-9-yl)ethyl]phosphonic Acids on Metal Oxides

[2-(9 H -Carbazol-9-yl)ethyl]phosphonic acid (2PACz) and its derivatives are being used extensively as hole-transport layers in organic and perovskite solar cells due to their ability to modify electrode work function, surface wettability, and in some cases, to improve active-layer adhesion, while minimizing interfacial energy losses. The orientation and coverage of surface modifiers significantly impact these functional properties; however, the detailed structure and packing in these overlayers are challenging to investigate, leading to a lack of understanding of how this structure and packing influence performance and limiting the ability to rationally design molecular modifiers. Here, we investigate monolayers of 2-(9 H -carbazol-9-yl)ethyl phosphonic acid derivatives (from here on referred to as X-2PACz) on indium tin oxide (ITO) and alpha phase aluminum oxide (α-Al 2 O 3 ) using a combination of X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, and X-ray reflectivity (XRR). By correlating elemental ratios, molecular orientation, and electron density profiles, we directly quantify surface coverage, layer thickness, and molecular tilt across a series of chemically related monolayers. We find that 2PACz and the X-2PACz derivatives form dense monolayers on α-Al 2 O 3 and ITO, with similar surface coverages on either substrate that are inversely proportional to molecular steric bulk. These surface coverage results indicate that X-2PACz is sterically limited in its monolayer surface packing density, as opposed to site limited. Despite surface packing density differences between molecules, the NEXAFS data show a constant average molecular orientation of 61° to 65° between the plane of the carbazole and the substrate for all the molecules on both substrates. These results increase our general understanding of 2PACz derivatives as they become increasingly useful in high performance solar cells.

NEXAFS↗
DOE OSTI2020

Molecular Recognition at Mineral Interfaces: Implications for the Beneficiation of Rare Earth Ores

Ce-bastnäsite is the single largest mineral source for light rare-earth elements. In view of the growing industrial importance of rare-earth minerals, it is critical to develop more efficient methods for separating the valuable rare-earth-containing minerals from the surrounding gangue. In this work, we employ a combination of periodic density functional theory (DFT) and molecular mechanics (MM) calculations together with the de novo molecular design program HostDesigner to identify bis-phosphinate ligands that preferentially bind to the (100) Ce-bastnäsite surface rather than the (104) calcite surface. DFT calculations for a simple phosphinate ligand were employed to qualitatively understand key behaviors involved in ligand–metal, ligand–solvent, and solvent–metal interactions. These insights were then used to guide the search for flexible, rigid, and semirigid hydrocarbon linkers to identify candidate bis-phosphinate ligands with the potential to bind preferentially to Ce-bastnäsite. Among the five most promising bis-phosphinate ligands suggested by theoretical studies, three ligands were synthesized and their adsorption characteristics to bastnäsite (100) interfaces were characterized using vibrational sum-frequency (vSFG) spectroscopy, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and isothermal titration calorimetry (ITC). The efficacy of the selective interfacial molecular binding was demonstrated by identifying a bis-phosphinate ligand capable of providing an overall higher surface coverage of alkyl groups relative to a monophosphinate ligand. The results highlight the interplay between adsorption binding strength and maximum surface coverage in determining ligand efficiency to render the mineral surface hydrophobic. DFT calculations further indicate that all tested ligands have higher affinity for Ce-bastnäsite than for calcite. Finally, this is consistent with the ITC data showing stronger adsorption enthalpy to bastnäsite than to calcite, making these ligands promising candidates for selective flotation of Ce-bastnäsite.

58 GEOSCIENCES↗
DOE OSTI2025

MXene-Derived Potassium-Preintercalated Bilayered Vanadium Oxide Nanostructures for Cathodes in Nonaqueous K-Ion Batteries

Bilayered vanadium oxides (BVOs) are promising cathode materials for beyond-Li-ion batteries due to their tunable chemistries and high theoretical capacities. However, the large size of beyond-Li + ions limits electrochemical cycling and rate capability of BVO electrodes. Recent reports of MXene-derived BVOs with nanoscale flower-like morphology have shown improved electrochemical stability at high rates up to 5C in nonaqueous lithium-ion batteries. Here, we report how morphological stabilization can lead to improved rate capability in potassium-ion batteries (PIBs) through the synthesis and electrochemical characterization of MXene-derived K-preintercalated BVOs (MD-KVOs), which were derived from two V 2 CT x precursor materials prepared using two different etching protocols. We show that the etching conditions affect the surface chemistry of the MXene, which plays a role in the MXene-to-oxide transformation process. MXene derived from a milder etchant transformed into a nanoflower MD-KVO with two-dimensional (2D) nanosheet petals (KVO-DMAE) while a more aggressive etchant produced a MXene that transformed into a MD-KVO with one-dimensional (1D) nanorod morphology (KVO-CMAE). Electrochemical cycling of the produced MD-KVOs after drying at 200 °C under vacuum (KVO-DMAE-200 and KVO-CMAE-200) in PIBs showed that electrochemical stability of MD-KVO at high rates improved through the morphological stabilization of 2D particles combined with the control of interlayer water and K + ion content. Structure refinement of KVO-DMAE-200 further corroborates the behavior observed during K + ion cycling, connecting structural and compositional characteristics to the improved rate capability. This work demonstrates how proper synthetic methodology can cause downstream effects in the control of structure, chemical composition, and morphology of nanostructured layered oxide materials, which is necessary for development of future materials for beyond-Li-ion battery technologies.

25 ENERGY STORAGE↗
DOE OSTI2025

Directed Self-Assembly of the Organic Semiconductor C8-BTBT-C8 in Anodic Aluminum Oxide Nanopores

Controlling the self-assembly of organic semiconductors at the nanoscale is critical for advancing high-performance electronic and photonic devices, yet it remains challenging due to their intrinsic anisotropic crystallization and sensitivity to processing conditions. Here, in this study, we demonstrate that cylindrical nanoconfinement within anodic aluminum oxide membranes provides a versatile platform to precisely tune the molecular orientation and phase behavior of the prototypical organic semiconductor 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT-C8). Combining temperature-dependent high-resolution synchrotron X-ray scattering with optical birefringence measurements, we uncover that confinement geometries (pore diameters 25–180 nm) and surface chemistry govern the emergence of distinct smectic A textures, featuring molecular layers either parallel or perpendicular to the pore axis. The competition between axial and radial smectic layering is modulated by pore size, surface hydrophilicity, and thermal history, enabling reversible control over domain orientations and transitions between liquid crystalline and crystalline states. Notably, nanoconfinement stabilizes the smectic phase over an expanded temperature range compared to bulk, while inducing complex multidomain configurations owing to geometric constraints and anchoring conditions. Our results elucidate fundamental mechanisms by which anisotropic nanoscale confinement directs the self-organization of highly conjugated organic molecules, with implications for optimizing directional charge transport and anisotropic optical responses in organic–inorganic hybrid nanoarchitectures. This study establishes nanoconfinement as a powerful strategy to engineer morphology and functional properties in organic semiconducting materials with nanoscale precision.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Comparing the Effects of Side Chain Dipole–Dipole Interactions and Hydrogen Bonding on the Mechanical and Electrical Properties of Poly(3-hexylthiophene)

Poly(3-alkylthiophenes) are simple conjugated polymers with good electrical properties, but tend to be brittle, limiting their application. Here, we investigate how side chain modifications can improve their toughness without compromising their charge transport. Specifically, we compare a weak dipole–dipole interaction of ester groups with a stronger hydrogen-bonding interaction of the hydroxyl groups. Two copolymers with targeted 5 and 10 mol % ester-functionalized side chains were synthesized and hydrolyzed in the solid state to introduce hydroxyl groups. Both hydrolyzed polymers became insoluble in most organic solvents, providing a path to layer-by-layer solution processing. All polymers’ optical, thermal, structural, electrical, and mechanical properties were investigated. Optical spectroscopy revealed that functionalization at these low levels did not significantly affect aggregation or π–π stacking. Differential scanning calorimetry indicated reduced crystallinity in the functionalized copolymers compared to that of P3HT. Grazing-incidence wide-angle X-ray diffraction data showed that functionalization led to an increase in lamellar spacing without altering molecular orientation or π–π stacking. Mechanical testing highlighted that at the lower functionalization level, both ester and hydroxyl groups similarly enhanced toughness, suggesting that disorder, rather than the specific nature of the functional group, was responsible for these improvements. At the higher functionalization level, hydroxyl groups significantly increased the elastic modulus while also negatively impacting charge carrier mobility. This study suggests that with stronger hydrogen-bonding groups, only very small amounts can improve P3HT’s toughness. For a wider tunable range, it may be a better strategy to use weak interactions such as dipole–dipole interactions of ester groups.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Dithieno[3,2-c:3′,2′‑ h ][2,6]naphthyridine-4,9(5H,10H)-dione-Based Conjugated Polymers for High Stable n‑Type Organic Electrochemical Transistors

Amide/imide-based conjugated polymers have been utilized as n-type OECT materials and have demonstrated promising device performance. However, their performance remains insufficient in terms of both efficiency and stability, which limits their practical applications. The development of conjugated polymers based on amide and imide groups represents a promising approach to address this issue. Here, in this study, we introduced dithieno­[3,2-c:3′,2′-h]­[2,6]­naphthyridine-4,9­(5H,10H)-dione (TVTDA) into the design of the OECT materials for the first time. By copolymerizing it with (E)-2,2′-(ethene-1,2-diyl)­bis­(thiophene-3-carbonitrile), we prepared two polymers, TVTDA-2CNTVT-ST and TVTDA-2CNTVT-BR, which contain linear or branched ethylene glycol side chains, respectively. OECT devices based on these polymers demonstrate n-type charge transport characteristics, achieving promising μC* values of 7.17 and 26.5 F cm –1 V –1 s –1 for TVTDA-2CNTVT-ST and TVTDA-2CNTVT-BR, respectively. The higher electron mobility and μC* of TVTDA-2CNTVT-BR can be attributed to its mixed edge-on and face-on stacking mode, larger crystalline coherence length, and larger domain size in the thin film. To our delight, the OECT devices based on both polymers exhibit good operational stability after operating in an aqueous solution for 2000 s, with current retention rates exceeding 93%, representing the high level among the OECT devices based on amide/imide-conjugated polymers. Our study demonstrates that the TVTDA unit holds great potential for constructing high-performance n-type OECT materials.

36 MATERIALS SCIENCE↗