Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LITHIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Investigating the Mechanism of Reversible Lithium Insertion into Anti-NASICON Fe 2 (WO 4 ) 3

The gram-scale preparation of Fe 2 (WO 4 ) 3 by a new solution-based route and detailed characterization of the material are presented. The resulting Fe 2 (WO 4 ) 3 undergoes a reversible electrochemical reaction against lithium centered around 3.0 V with capacities near 93% of the theoretical maximum. Evolution of the Fe 2 (WO 4 ) 3 structure upon lithium insertion and deinsertion is probed using a battery of characterization techniques, including in situ X-ray diffraction, neutron total scattering, and X-ray absorption spectroscopy (XAS). A structural transformation from monoclinic to orthorhombic phases is confirmed during lithium intercalation. XAS and neutron total scattering measurements verify that Fe 2 (WO 4 ) 3 consists of trivalent iron and hexavalent tungsten ions. As lithium ions are inserted into the framework, iron ions are reduced to the divalent state, while the tungsten ions are electrochemically inactive and remain in the hexavalent state. Lastly, lithium insertion occurs via a concerted rotation of the rigid polyhedra in the host lattice driven by electrostatic interactions with the Li + ions; the magnitude of these polyhedral rotations was found to be slightly larger for Fe 2 (WO 4 ) 3 than for the Fe 2 (MoO 4 ) 3 analog.

25 ENERGY STORAGE↗

Nonuniform Growth of Sub-2 Nanometer Atomic Layer Deposited Alumina Films on Lithium Nickel Manganese Cobalt Oxide Cathode Battery Materials

The deposition of alumina ALD films on Li ion battery cathode particles is known to enhance the cycling stability of lithium ion batteries fabricated from those coated particles. It is commonly assumed that the film on the particles is of uniform thickness and is optimally thin enough to facilitate lithium diffusion while blocking side reactions of the electrolyte with the cathode substrate. Here, we elucidate the nature of thin alumina films deposited with between 2 and 15 ALD cycles on lithium nickel manganese cobalt oxide cathode precursor particles. Low energy ion scattering (LEIS) and secondary ion mass spectroscopy (SIMS) methods were used to characterize thin (<2 nm) films that were deposited by ALD. Surface analysis showed that low-cycle number ALD films were not uniform nor uniformly thick over the surface of the cathode particles and that alumina ALD preferentially deposited on transition metal bound sites on the cathode particle surface and coated Li on the surface to a lesser extent. Lithium was found to still be present on the cathode powder surface, even after 10 ALD cycles. Contrary to current supposition, low-cycle ALD appeared to improve the cycling stability of battery cathode active materials through this preferential growth that stabilized the transition metal oxides in the presence of electrolyte without blocking lithium intercalation pathways. This is the first study to determine that Li remains exposed on the as-synthesized surface of ALD coated cathode particles and that the ALD film is nonuniform and nonuniformly thick when less than 10 ALD cycles are used.

36 MATERIALS SCIENCE↗

Efficient Low-Temperature Direct Lithium Extraction from Chloride Brines Enabled by High-Capacity Sorbent

The demand for lithium, a key component in rechargeable batteries for electric vehicles and renewable energy storage systems, has surged in recent years. Meeting this demand requires efficient extraction methods that are both environmentally friendly and economically viable. This study investigates the utilization of the high-capacity sorbent amorphous aluminum hydroxide for enabling efficient direct lithium extraction at low temperatures. Traditional extraction methods often involve acid-leaching and energy-intensive processes that are not only expensive but also environmentally taxing. In contrast, our approach leverages the exceptional sorption properties of amorphous aluminum hydroxide to facilitate lithium extraction directly from brine, achieving extraction efficiencies of 94.4% in case 1 and 96.2% in case 2 at low temperatures. Kinetic modeling using the Avrami–Erofe’ev framework reveals a nucleation-growth mechanism ( n = 0.71, k = 0.131 h –1 ), providing quantitative insights into the solid-state phase transformation process. This method significantly reduces energy consumption and minimizes the environmental footprint. Through systematic experimentation and optimization, we demonstrate the effectiveness and scalability of our approach, highlighting its potential to revolutionize lithium extraction processes. Our findings highlight the potential of high-capacity sorbents, particularly amorphous aluminum hydroxide toward sustainable lithium production, contributing to the advancement of clean-energy technologies.

anions↗

A Cation-Tethered Flowable Polymeric Interface for Enabling Stable Deposition of Metallic Lithium

A fundamental challenge, shared across many energy storage devices, is the complexity of electrochemistry at the electrode–electrolyte interfaces that impacts the Coulombic efficiency, operational rate capability, and lifetime. Specifically, in energy-dense lithium metal batteries, the charging/discharging process results in structural heterogeneities of the metal anode, leading to battery failure by short-circuit and capacity fade. In this work, we take advantage of organic cations with lower reduction potential than lithium to build an electrically responsive polymer interface that not only adapts to morphological perturbations during electrodeposition and stripping but also modulates the lithium ion migration pathways to eliminate surface roughening. As a result, we find that this concept can enable prolonging the long-term cycling of a high-voltage lithium metal battery by at least twofold compared to bare lithium metal.

25 ENERGY STORAGE↗

4D imaging of lithium-batteries using correlative neutron and X-ray tomography with a virtual unrolling technique

The temporally and spatially resolved tracking of lithium intercalation and electrode degradation processes are crucial for detecting and understanding performance losses during the operation of lithium-batteries. Here, high-throughput X-ray computed tomography has enabled the identification of mechanical degradation processes in a commercial Li/MnO 2 primary battery and the indirect tracking of lithium diffusion; furthermore, complementary neutron computed tomography has identified the direct lithium diffusion process and the electrode wetting by the electrolyte. Virtual electrode unrolling techniques provide a deeper view inside the electrode layers and are used to detect minor fluctuations which are difficult to observe using conventional three dimensional rendering tools. Moreover, the 'unrolling' provides a platform for correlating multi-modal image data which is expected to find wider application in battery science and engineering to study diverse effects e.g. electrode degradation or lithium diffusion blocking during battery cycling.

25 ENERGY STORAGE↗

Lithium dendrite growth mechanisms in polymer electrolytes and prevention strategies

Future lithium-ion batteries must use lithium metal anodes to fulfill the demands of high energy density applications with the potential to enable affordable electric cars with 350-mile range. However, dendrite growth during charging prevents the commercialization of this technology. It has been demonstrated that the presence of a compressive mechanical stress field around a dendritic protrusion prevents growth. Several techniques based on this concept, such as protective layers, externally applied pressure and solid electrolytes have been investigated by other researchers. Because of the low coulombic efficiencies associated with the stiff protective layers and high-pressure conditions, implementation of these techniques in commercial cells is complicated. Polymer-based solid electrolytes demonstrate better efficiency and capacity retention capabilities. However, dendrite growth is still possible in polymer electrolytes at higher current densities. The simulations described in this article provide guidance on the conditions under which dendrite growth is possible in polymer cells and targets for material properties needed for dendrite prevention. Increasing the elastic modulus of the electrolyte prevents the growth of dendritic protrusions in two ways: (i) higher compressive mechanical stress leads to reduced exchange current density at the protrusion peak compared to the valley, and (ii) plastic deformation of lithium metal results in reduction of the height of the dendritic protrusion. A phase map is constructed, showing the range of operation (applied current) and design (electrolyte elastic modulus) parameters that corresponds to stable lithium deposition. In conclusion, it is found that increasing the yield strength of the polymer electrolyte plays a significant role in preventing dendrite growth in lithium metal anodes, providing a new avenue for further exploration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Review on organosulfur materials for rechargeable lithium batteries

Organic electrode materials have been considered as promising candidates for the next generation rechargeable battery systems due to their high theoretical capacity, versatility, and environmentally friendly nature. Among them, organosulfur compounds have been receiving more attention in conjunction with the development of lithium-sulfur batteries. Usually, organosulfide electrodes can deliver relatively high theoretical capacity based on reversible breakage and formation of disulfide (S-S) bonds. Here, we provide an overview of organosulfur materials for rechargeable lithium batteries, including their molecular structural design, structure related electrochemical performance study as well as electrochemical performance optimization. In addition, recent progress of advanced characterization techniques for investigation of the structure and lithium storage mechanism of organosulfur electrodes are elaborated. To further understand the perspective application, additive effect of organosulfur compounds for lithium metal anodes, sulfur cathodes as well as high voltage inorganic cathode materials are reviewed with typical examples. Finally, some remaining challenges and perspective of the organosulfur compounds as lithium batteries components are also discussed. This review is intended to serve as a general guidance for researcher to facilitate the development of organosulfur compounds.

25 ENERGY STORAGE↗

Magnetic diagnostics for the lithium tokamak experiment

The lithium tokamak experiment (LTX) is a spherical tokamak with R{sub 0}=0.4 m, a=0.26 m, B{sub TF}{approx}3.4 kG, I{sub P}{approx}400 kA, and pulse length {approx}0.25 s. The focus of LTX is to investigate the novel low-recycling lithium wall operating regime for magnetically confined plasmas. This regime is reached by placing an in-vessel shell conformal to the plasma last closed flux surface. The shell is heated and then coated with liquid lithium. An extensive array of magnetic diagnostics is available to characterize the experiment, including 80 Mirnov coils (single and double axis, internal and external to the shell), 34 flux loops, 3 Rogowskii coils, and a diamagnetic loop. Diagnostics are specifically located to account for the presence of a secondary conducting surface and engineered to withstand both high temperatures and incidental contact with liquid lithium. The diagnostic set is therefore fabricated from robust materials with heat and lithium resistance and is designed for electrical isolation from the shell and to provide the data required for highly constrained equilibrium reconstructions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Thomson scattering system on the lithium tokamak experiment

The lithium tokamak experiment (LTX) is a spherical tokamak with R{sub 0}=0.4 m, a=0.26 m, B{sub TF}{approx}3.4 kG, I{sub P}{approx}400 kA, and pulse length {approx}0.25 s. The goal of LTX is to investigate tokamak plasmas that are almost entirely surrounded by a lithium-coated plasma-facing shell conformal to the last closed magnetic flux surface. Based on previous experimental results and simulation, it is expected that the low-recycling liquid lithium surfaces will result in higher temperatures at the plasma edge, flatter overall temperature profiles, centrally peaked density profiles, and an increased confinement time. To test these predictions, the electron temperature and density profiles in LTX will be measured by a multipoint Thomson scattering system. Initially, TS measurements will be made at up to 12 simultaneous points between the plasma center and plasma edge. Later, high resolution edge measurements will be deployed to study the lithium edge physics in greater detail. Technical challenges to implementing the TS system included limited 'line-of-sight' access to the plasma due to the plasma-facing shell and problems associated with the presence of liquid lithium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microwave exfoliated graphene oxide/TiO{sub 2} nanowire hybrid for high performance lithium ion battery

Lithium ion battery (LIB) is a key solution to the demand of ever-improving, high energy density, clean-alternative energy systems. In LIB, graphite is the most commonly used anode material; however, lithium-ion intercalation in graphite is limited, hindering the battery charge rate and capacity. To date, one of the approaches in LIB performance improvement is by using porous carbon (PC) to replace graphite as anode material. PC's pore structure facilitates ion transport and has been proven to be an excellent anode material candidate in high power density LIBs. In addition, to overcome the limited lithium-ion intercalation obstacle, nanostructured anode assembly has been extensively studied to increase the lithium-ion diffusion rate. Among these approaches, high specific surface area metal oxide nanowires connecting nanostructured carbon materials accumulation have shown promising results for enhanced lithium-ion intercalation. Herein, we demonstrate a hydrothermal approach of growing TiO{sub 2} nanowires (TON) on microwave exfoliated graphene oxide (MEGO) to further improve LIB performance over PC. This MEGO-TON hybrid not only uses the high surface area of MEGO but also increases the specific surface area for electrode–electrolyte interaction. Therefore, this new nanowire/MEGO hybrid anode material enhances both the specific capacity and charge–discharge rate. Scanning electron microscopy and X-ray diffraction were used for materials characterization. Battery analyzer was used for measuring the electrical performance of the battery. The testing results have shown that MEGO-TON hybrid provides up to 80% increment of specific capacity compared to PC anode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

LITHIUM ABUNDANCES FROM OPTICAL HIGH-RESOLUTION SPECTROSCOPY OF WEAK-LINE T TAURI STARS

We present high-resolution spectroscopic observations for a sample of 19 weak-line T Tauri stars (WTTSs). Based on these observations and data of 108 WTTSs taken from the literature, we derive lithium abundances for 127 WTTSs. Investigation of a possible relation between lithium and rotation in WTTSs shows that: (1) rapidly rotating WTTSs have comparatively lower lithium abundances than their slower rotating counterparts; (2) in the spectral-type range G0-K0, most of the WTTSs share the same Li content irrespective of their T{sub eff}; and (3) active late-type binaries do not obey the correlation between lithium abundances and rotation periods, since the tidally locked rotation of the late-type binary system leads naturally to slower lithium destruction rates.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparison of active impurity control between lithium and boron powder real-time injection in EAST

The lithium and boron powder have been successfully real-time injected into Experimental Advanced Superconducting Tokamak (EAST) high-confinement (H-) mode discharges, showing good wall conditioning effects, especially on the impurities control. Both of lithium and boron powder particles are gravitationally accelerated into the upper edge of a upper single null discharge. The lithium powder real-time injection effectively reduced the tungsten impurity content both in the plasma edge and core. Contrary to the lithium injection, the boron injection mainly reduced the impurities content in the plasma core, while the impurities increased in the edge. Furthermore, this mainly due to that there was an edge harmonic mode stimulated by boron injection, providing sufficient particles transport. Moreover, the impurities control through boron injection has much wider operation windows than lithium powder injection. Furthermore, there was accumulative wall conditioning effects after sequential boron powder injection discharges.

36 MATERIALS SCIENCE↗

Behavior of lithium ions in the turbulent near-wall tokamak plasma under heating of ions and electrons of the main plasma

Turbulent dynamics of the near-wall tokamak plasma is simulated by numerically solving the nonlinear reduced Braginskii magnetohydrodynamic equations with allowance for a lithium ion admixture. The effects of turbulence and radiation of the admixture are analyzed in the framework of a self-consistent approach. The radial distributions of the radiative loss power and the density of Li{sup 0} atoms and Li{sup +1} ions are obtained as functions of the electron and ion temperatures of the main plasma in the near-wall layer. The results of numerical simulations show that supply of lithium ions into the low-temperature near-wall plasma substantially depends on whether the additional power is deposited into the electron or ion component of the main plasma. If the electron temperature in the layer increases (ECR heating), then the ion density drops. At the same time, an increase in the temperature of the main ions (ICR heating) leads to an increase in the density of Li{sup +1} ions. The results of numerical simulations are explained by the different influence of the electron and ion temperatures on the atomic processes governing the accumulation and loss of particles in the balance equations for neutral Li{sup 0} atoms and Li{sup +1} ions in the admixture. The radial profile of the electron temperature and the corresponding distribution of the radiative loss power for different densities of neutral Li{sup 0} atoms on the wall are obtained. The calculations show that the presence of Li{sup +1} ions affects turbulent transport of the main ions. In this case, the electron heat flux increases by 20–30% with increasing Li{sup +1} density, whereas the flux of the main ions drops by nearly the same amount. The radial profile of the turbulent flux of lithium ions is obtained. It is demonstrated that the appearance of the pinch effect is related to the positive density gradient of lithium ions across the calculation layer. For the parameters of the T-10 tokamak, the effect of radiative cooling of the near-wall plasma layer becomes appreciable when the near-wall density of neutral lithium atoms exceeds 7 × 10{sup 11} cm{sup −3}. In this case, the density of radiative loss power in the center of the layer is estimated to be about 500–600 kW/m{sup 3}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Physics design for a lithium vapor box divertor experiment on Magnum-PSI

The lithium vapor box divertor is a potential solution for power exhaust in toroidal confinement devices. The divertor plasma interacts with a localized, dense cloud of lithium vapor, leading to volumetric radiation, cooling, recombination, and detachment. To minimize contamination of the core plasma, lithium vapor is condensed on cool (300°C to 400°C) baffles upstream of the detachment point. Before implementing this in a toroidal plasma device with a slot divertor geometry, we consider an experiment with a scaled baffled-pipe geometry in the high-power linear plasma device Magnum-PSI. Three 15 cm-scale open cylinders joined by 6 cm diameter ‘nozzles’ are positioned on the plasma beam axis upstream of a target. The central box may be loaded with several tens of grams of lithium, which can be evaporated at 650°C to produce a vapor predicted, using a simple plasma-neutral interaction model, to be dense enough to cause volumetric detachment in the plasma. The power delivered to the target and box walls as measured by increases in their temperatures after a 10 s plasma pulse can be compared to determine the effectiveness of the vapor in detaching the plasma. Direct Simulation Monte Carlo simulations are performed to estimate the flow rates of lithium vapor between the boxes and to estimate the trapping of H2 delivered by the plasma in the boxes, which could inadvertently lead to detachment. Details of the geometry, simulations, and possible diagnostic techniques are presented.

divertor↗

In situ Diagnostics of Coupled Electrochemical-Mechanical Properties of Solid Electrolyte Interphases on Lithium Metal Rechargeable Batteries (Final Technical Report)

The fundamental understanding of the coupled mechanical/chemical degradation of the SEI layer during lithium cycling will enable the project to identify the desirable mechanical properties on SEI/lithium as a system and the specific transport properties that enable the homogenous lithium stripping/plating while avoiding the mossy structure. Furthermore, it will allow the project to develop a highly impactful strategy to protect lithium metal and achieve dendrite free high cycle efficiency, which can dramatically increase the energy density of lithium batteries for EV applications. During past three years, four coherent steps have been taken to solve the coupled mechanical and electrochemical degradation: (1) Developed a comprehensive set of in-situ diagnostic techniques to investigate the coupled mechanical/chemical properties of SEI layer and its impact on lithium striping/plating. (2) Identified failure mechanisms of SEI/Li as a whole electrode system using in-situ electrochemical tools. (3) Established a design strategy of protective coatings on Li metal to extend the cycle life Li meal electrode. (4) Developed novel surface coatings as the artificial SEI layer to protect Li metal and significantly extend cycle life. During past 3-year budget period, we have published over 16 peer-reviewed paper, filed 7 patents, and given over 30 invited talks. 5 graduated students and 2 postdocs were supported by this project.

36 MATERIALS SCIENCE↗

Novel Zwitterionic Chromatography to Separate Lithium from Unconventional Resources

Since lithium (Li) is a key element for clean energy technologies, the global lithium demand is anticipated to increase rapidly. As a result, efficient lithium extraction technologies that allow the exploitation of unconventional lithium resources, such as geothermal brines and inland brine streams, are essentially needed to meet the Li demand and keep supply chains stable. However, because of low Li concentration, low ratio of Li/Mg or Li/Ca, and complex feed compositions in these feedstocks, using conventional hydrometallurgy or current Direct Lithium Extraction (DLE) processes are often chemical-intensive, requiring substantial amounts of reagent chemicals to recover Li at scale, resulting in large chemical footprints. Therefore, we developed a novel Zwitterionic Chromatography (ZIC) process to separate Li from these resources. Because Li can be partitioned from divalent salts on ZIC under water elution without using chemicals, exploiting the unconventional resources via a ZIC approach can be environmentally benign and sustainable. In this work, we will present the development of the ZIC process for DLE applications. Simulation studies for the Li separation mechanism in ZIC and the demonstration of a continuous ZIC process to separate Li from domestic inland brine and mining wastewater will be presented. Finally, the chemical and energy footprints of ZIC in comparison to other DLE processes will be discussed.

09 BIOMASS FUELS↗

Fluorinated Glyme Solvents to Extend Lithium-Sulfur Battery Life (Final Technical Report, Unlimited)

This project investigated a number of partially fluorinated glymes (PFGs) as electrolyte cosolvents to improve the performance of lithium-sulfur (Li-S) batteries. A major issue in Li-S cells is the electrochemical reaction of sulfur in the cathode to form lithium polysulfides (LPS) that dissolve in the electrolyte. Those LPS are electrochemically and chemically reactive at the lithium anode, resulting in lithium sulfide deposition on the anode and also electrochemical reaction at both the anode and cathode, leading to a “polysulfide shuttle” and reduced coulombic efficiency (CE) and self-discharge of the cell. PFGs reduce the solubility of LPS while maintaining good solubility of lithium salts such as LiTFSI. By adjusting the amount of PFG as cosolvent in the electrolyte, we showed that the solubility of LPS in the electrolyte can be tuned. (It is not desirable to completely eliminate LPS in the electrolyte, as they facilitate electrochemical reaction of the electrically insulating S 8 and Li 2 S within the cathode by shuttling charge between them and the conductive carbon.) Another issue in Li-S cells is degradation of the Li anode over many cycles of stripping (discharge) and plating (charge). We showed that PFGs have a beneficial effect on the physical morphology of the Li anode, SEI formation, and the CE of a Li-Li cell. Among the many PFGs tested, we found the best performance from PFGs designated PFG2 and PFG5, and these two PFGs were thoroughly studied. A systematic coin-cell study of electrolyte solvents of 90:10, 80:20, or 70:30 DME:PFG (DME = 1,2-dimethoxyethane) revealed some systematic trends: a higher percentage of PFG solvent led to substantially longer cycle life, but at the same time reduced specific capacity (mAh/g(S)) and cell capacity at higher rates. These studies used LiFSI as the electrolyte salt, as it was found to extend cycle life compared to LiTFSI. Finally, the addition of a small amount of 1,3-dioxolane (DOL) to the electrolyte was found to be beneficial. The overall optimal electrolyte solution was found to be 0.6 M LiFSI + 0.5 M LiNO 3 in 75:5:20 DME/DOL/PFG (either PFG2 or PFG5).

25 ENERGY STORAGE↗

Factors That Control the Formation of Dendrites and Other Morphologies on Lithium Metal Anodes

Lithium metal is a promising anode material for next-generation rechargeable batteries, but non-uniform electrodeposition of lithium is a significant barrier. These non-uniform deposits are often referred to as lithium “dendrites,” although their morphologies can vary. We have surveyed the literature on lithium electrodeposition through three classes of electrolytes: liquids, polymers and inorganic solids. We find that the non-uniform deposits can be grouped into six classes: whiskers, moss, dendrites, globules, trees, and cracks. These deposits were obtained in a variety of cell geometries using both unidirectional deposition and cell cycling. The main result of the study is a figure where the morphology of electrodeposited lithium is plotted as a function of two variables: shear modulus of the electrolyte and current density normalized by the limiting current density. We show that specific morphologies are confined to contiguous regions on this two-dimensional plot.

25 ENERGY STORAGE↗