Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Indoor air pollution from solid fuel use, chronic lung diseases and lung cancer in Harbin, Northeast China

In some areas of China, indoor air pollution (IAP) originating principally from the combustion of solid fuels has a relevant role in lung cancer. Most previous studies focused on the female population and only a few on both the sexes. We analyzed the relationship between IAP from solid fuel use and selected chronic lung diseases and lung cancer risk in Harbin, Northeast China, an area with a very high base line risk of lung cancer for both the sexes. We used data from a case-control study conducted between 1987 and 1990, including 218 patients with incident, histologically confirmed lung cancer and 436 controls admitted to the same hospitals as cases. We calculated an index of IAP from solid fuel use exposure using data on heating type, cooking fuel used, and house measurements. Cases reported more frequently than controls on exposure to coal fuel for house heating and/or cooking, and the odds ratio (OR) for ever versus never exposed was 2.19 (95% confidence interval (CI): 1.08-4.46). The ORs of lung cancer according to subsequent tertiles of IAP exposure index were 1.82 (95% CI: 1.14-2.89) and 1.99 (95% CI: 1.26-3.15) as compared with the lowest tertile. The ORs of lung cancer for participants with a history of chronic bronchitis and tuberculosis were 3.79 (95% CI: 2.38-6.02) and 3.82 (95% CI: 1.97-7.41), respectively. This study gives further support and quantification of the positive association between IAP, history of selected nonmalignant lung diseases, and lung cancer risk for both the sexes.

01 COAL, LIGNITE, AND PEAT↗

What component of coal causes coal workers' pneumoconiosis?

The objective was to evaluate the component of coal responsible for coal workers' pneumoconiosis (CWP). A literature search of PubMED was conducted to address studies that have evaluated the risk of CWP based on the components of coal. The risk of CWP (CWP) depends on the concentration and duration of exposure to coal dust. Epidemiology studies have shown inverse links between CWP and quartz content. Coal from the USA and Germany has demonstrated links between iron content and CWP; these same studies indicate virtually no role for quartz. In vitro studies indicate strong mechanistic links between iron content in coal and reactive oxygen species, which play a major role in the inflammatory response associated with CWP. The active agent within coal appears to be iron, not quartz. By identifying components of coal-before mining activities, the risk of developing CWP may be reduced.

01 COAL, LIGNITE, AND PEAT↗

PET imaging in patients with coal workers pneumoconiosis and suspected malignancy

Abstract: Positron Emission Tomography (PET) with F-18-fluorodeoxyglucose is commonly used in the evaluation of lung nodules; however, there is limited data on the PET appearance of coal worker's pneumoconiosis (CWP) and its utility for diagnosing lung malignancy in this setting. Six cases of CWP and suspected malignancy are reported. Each patient had at least one nodule >1 cm in diameter for a total of 19 nodules >1 cm. On PET imaging 18 of the 19 nodules were hypermetabolic and five of the six patients had at least one nodule that was PET positive. Based on pathologic data and clinical follow-up, none of the six patients had any evidence of malignancy. In this series, PET imaging was often positive in patients with CWP; however, all were false positives with standardized uptake value measurements in the range that are typically seen with malignant nodules. Due to its high rate of false positives, PET imaging seems to be of limited utility in diagnosing malignancy in patients with underlying coal worker's pneumoconiosis.

01 COAL, LIGNITE, AND PEAT↗

Plant growth response in experimental soilless mixes prepared from coal combustion products and organic waste materials

Large quantities of organic materials such as animal manures, yard trimmings, and biosolids are produced each year. Beneficial use options for them are often limited, and composting has been proposed as a way to better manage these organic materials. Similarly, burning of coal created 125 million tons of coal combustion products (CCP) in the United States in 2006. An estimated 53 million tons of CCP were reused, whereas the remainder was deposited in landfills. By combining CCP and composted organic materials (COM), we were able to create soilless plant growth mixes with physicochemical conditions that can support excellent plant growth. An additional benefit is the conservation of natural raw materials, such as peat, which is generally used for making soilless mixes. Experimental mixes were formulated by combining CCP and COM at ratios ranging from 2:8 to 8:2 (vol/vol), respectively. Water content at saturation for the created mixes was 63% to 72%, whereas for the commercial control, it was 77%. pH values for the best performing mixes ranged between 5.9 and 6.8. Electrical conductivity and concentrations of required plant nutrient were also within plant growth recommendations for container media. Significantly (P < 0.0001) higher plant biomass growth (7%-130%) was observed in the experimental mixes compared with a commercial mix. No additional fertilizers were provided during the experiment, and reduced fertilization costs can thus accrue as an added benefit to the grower. In summary, combining CCP and COM, derived from source materials often viewed as wastes, can create highly productive plant growth mixes.

01 COAL, LIGNITE, AND PEAT↗

Impact of flue gas desulfurization-calcium sulfite and gypsum on soil microbial activity and wheat growth

We conducted greenhouse tests to evaluate the effects of FGD-CaSO{sub 3} applied at rates of 0, 2.2, 4.4, and 8.8 Mg ha(-1) on wheat growth, soil enzyme activities, and the chemical properties of two soils with differing pH (4.0 vs. 6.2). A gypsum treatment applied at the rate of 2.2 Mg ha{sup -1} was used as a positive control. Exchangeable Ca{sup 2+} and water-extractable Ca{sup 2+} and SO{sub 4}{sup 2-} increased significantly with increasing FGD-CaSO{sub 3} application. SO{sub 4}{sup 2-} increased in both soils, indicating rapid oxidation of SO{sub 3}{sup 2-} to SO{sub 4}{sup 2-} when neither water nor oxygen was limiting. No changes in soil pH were measured. Applications of 2.2, 4.4, or 8.8 Mg CaSO{sub 3} ha{sup -1} to the pH 6.2 soil produced no effect on wheat growth or the uptake of N, P, Ca{sup 2+}, and Mg{sup 2+}. The uptake of SO{sub 4}{sup 2-} -S increased, whereas K uptake decreased. No significant differences in the activities of urease, {beta}-glucosidase, alkaline phosphatase, or arylsulfatase were observed relative to a control. In the acid soil, an application of 2.2 Mg ha{sup -1} FGD-CaSO{sub 3} increased wheat root growth and dry matter yield compared with an untreated control. The uptake of N, P, Ca{sup 2+}, and K{sup +} also increased presumably because of enhanced root development resulting from decreases in exchangeable Al{sup 3+} and increases in soluble Ca{sup 2+}. Wheat growth and alkaline phosphatase and arylsulfatase activities were significantly inhibited by addition of 8.8 Mg ha{sup -1} of FGD-CaSO{sub 3} compared with the untreated control or the same soil receiving 2.2 Mg ha{sup -1} gypsum. We conclude that surface applications of FGD-CaSO{sub 3} may be as effective as gypsum for inhibiting soil crusting, improving water infiltration, and promoting the movement of Ca{sup 2+} into acid subsoils. Moreover, application rates of equal to or less than 4.4 Mg ha-1 should have no negative impact on soil microbial activities or plant growth.

01 COAL, LIGNITE, AND PEAT↗

Abelian SU(N) 1 chiral spin liquids on the square lattice

In the physics of the Fractional Quantum Hall (FQH) effect, a zoo of Abelian topological phases can be obtained by varying the magnetic field. Aiming to reach the same phenomenology in spin-like systems, in this work we propose a family of SU(N)-symmetric models in the fundamental representation, on the square lattice with short-range interactions restricted to triangular units, a natural generalization for arbitrary N of an SU(3) model studied previously where time-reversal symmetry is broken explicitly. Guided by the recent discovery of SU(2) 1 and SU(3) 1 chiral spin liquids (CSL) on similar models we search for topological SU(N) 1 CSL in some range of the Hamiltonian parameters via a combination of complementary numerical methods such as exact diagonaliza- tions (ED), infinite density matrix renormalization group (iDMRG) and infinite Projected Entangled Pair State (iPEPS). Extensive ED on small (periodic and open) clusters up to N = 10 and an innovative SU(N)-symmetric version of iDMRG to compute entanglement spectra on (infinitely-long) cylinders in all topological sectors pro- vide unambiguous signatures of the SU(N) 1 character of the chiral liquids. An SU(4)-symmetric chiral PEPS, constructed in a manner similar to its SU(2) and SU(3) analogs, is shown to give a good variational ansatz of the N = 4 ground state, with chiral edge modes originating from the PEPS holographic bulk-edge correspondence. Finally, we discuss the possible observation of such Abelian CSL in ultracold atom setups where the possibility of varying N provides a tuning parameter similar to the magnetic field in the physics of the FQH effect.

01 COAL, LIGNITE, AND PEAT↗

Model independent analysis of gluonic pole matrix elements and universality of transverse-momentum-dependent fragmentation functions

Gluonic pole matrix elements explain the appearance of single spin asymmetries (SSA) in high-energy scattering processes. They involve a combination of operators which are odd under time reversal (T-odd). Such matrix elements appear in principle both for parton distribution functions and parton fragmentation functions. We show that for parton fragmentation functions these gluonic pole matrix elements vanish as a consequence of the analytic structure of scattering amplitudes in Quantum Chromodynamics. Furthermore, this result is important in the study of the universality of transverse momentum dependent (TMD) fragmentation functions.

Gamberg, L. P.↗

Integration of 5G and Time Sensitive Networks in Fossil Energy Generation Systems: A Case Study

Precise timing and data transmission within stringent time constraints are critical for numerous applications, such as robotics, virtual and augmented reality, industrial automation, energy and medical business, and various other sectors. Time-sensitive networks (TSN) and fifth-generation wireless communications (5G) are crucial for industrial communications, enabling convergent communication for various services using a common network core. Applications that are time-sensitive and require deterministic communications with low latency fall into this category, such as generation plant systems. This paper presents a simulated model of 5G-TSN for a fossil power plant based on the wired network parameters implemented in situ. Metrics analysis, comparison and future work are presented. © 2024 IEEE.

01 COAL, LIGNITE, AND PEAT↗

Extraction of nuclear fuels from coal using microwave induced plasma gasification and electromagnetic plasma separation processes

Coal is till today the most commonly used fuel worldwide for electricity generation, with the largest consumers being China, USA and India respectively. Coal contains small amounts of radioactive elements such as uranium, thorium, potassium-40, radium and radon, in the range of a few parts per million, which make their removal difficult and economically unfeasible through conventional industrial technologies. The concentrations gets amplified in the coal ash (fly ash), thereby presenting environmental and human health risks. In this preliminary paper, we propose an innovative clean coal technology, namely microwave induced plasma gasification (MIPG) to turn coal into syngas, while the molten residue is sent to a microwave-heated electromagnetic plasma separator for isolation of radioactive elements. With the adoption of this technology, coal producing and consuming nations will be able to satisfy a large portion of their nuclear fuel requirements from clean coal. (author)

01 COAL, LIGNITE, AND PEAT↗

A Novel MagPipe Pipeline transportation system using linear motor drives

A novel capsule pipeline transportation system using linear motor drives, called Magplane MagPipe, is under development with the intention to replace trucks and railways for hauling materials from the mine to the rail head, power plant, or processing plant with reduced operating cost and energy consumption. The initial demonstration of a MagPipe line in Inner Mongolia will be a 500-m-long double-pipe coal transport system with the design transportation capacity of 3 Mega-Mg per year. The pipeline consists of 6-m-long plastic pipe modules with an I-beam suspension system inside the pipe to carry sets of five coupled capsules. The pipe will also contain noncontinuous motor winding modules spaced at 50-m intervals. A set of Halbach-arrayed permanent magnets on the bottom of the capsules interact with the linear motor windings to provide propulsion. The motor is driven by variable frequency drives outside the pipe to control the speed. This paper briefly describes the overall MagPipe pipeline transportation system, including the preliminary conclusions of the linear synchronous motor analysis.

01 COAL, LIGNITE, AND PEAT↗

An Experiment Study of the Propagation of Radio Waves in a Scaled Model of Long-Wall Coal Mining Tunnels

A long-wall coal mining tunnel is the most important working area in a coal mine. It has long been realized that radio communications can improve both productivity and safety in this dangerous area. Hence, many attempts to use radio communications in such an environment have been made. Unfortunately, no radio system has satisfactorily provided communication services there, which, we believe, is partially due to poor understanding of the propagation characteristics of radio waves in the long-wall mining tunnel. To have deeper physical insight into the propagation problem, a scaled model of the long-wall mining tunnel was built, and the propagation characteristics of UHF radio waves were measured. The experiment and the measured results are presented and discussed.

01 COAL, LIGNITE, AND PEAT↗

Underground mine communications: a survey

After a recent series of unfortunate underground mining disasters, the vital importance of communications for underground mining is underlined one more time. Establishing reliable communication is a very difficult task for underground mining due to the extreme environmental conditions. Until now, no single communication system exists which can solve all of the problems and difficulties encountered in underground mine communications. However, combining research with previous experiences might help existing systems improve, if not completely solve all of the problems. In this survey, underground mine communication is investigated. Major issues which underground mine communication systems must take into account are discussed. Communication types, methods, and their significance are presented.

01 COAL, LIGNITE, AND PEAT↗

DeNOx characteristics using two staged radical injection techniques

Ammonia radical injection using pulsed dielectric barrier discharge (DBD) plasma has been investigated as a means to control NOx emissions from combustors. When DBD plasma-generated radicals (NH{sub 2}, NH, N, and H) are injected into a flue gas containing nitrogen oxide (NOx), NOx is removed efficiently by chain reactions in the gas phase. However, because the percentage of NOx removal gradually decreases with increasing oxygen concentrations beyond 1% O{sub 2}, improvement of the DeNOx (removal of nitrogen oxide) characteristics at high O{sub 2} concentrations was necessary for commercial combustors. A two-staged injection of the DeNOx agent was developed based on the detailed mechanisms of electron impact reactions and gas phase reactions. A concentration of H radical was observed to play an important role in NOx formation and removal. The effects of applied voltages, oxygen concentrations, and reaction temperatures on NOx removal were investigated under normal and staged injection. NOx removal was improved by approximately 20% using staged injection at O{sub 2} concentrations of 1 to 4%.

01 COAL, LIGNITE, AND PEAT↗

Observer and data-driven-model-based fault detection in power plant coal mills

This paper presents and compares model-based and data-driven fault detection approaches for coal mill systems. The first approach detects faults with an optimal unknown input observer developed from a simplified energy balance model. Due to the time-consuming effort in developing a first principles model with motor power as the controlled variable, data-driven methods for fault detection are also investigated. Regression models that represent normal operating conditions (NOCs) are developed with both static and dynamic principal component analysis and partial least squares methods. The residual between process measurement and the NOC model prediction is used for fault detection. A hybrid approach, where a data-driven model is employed to derive an optimal unknown input observer, is also implemented. The three methods are evaluated with case studies on coal mill data, which includes a fault caused by a blocked inlet pipe. All three approaches detect the fault as it emerges. The optimal unknown input observer approach is most robust, in that, it has no false positives. On the other hand, the data-driven approaches are more straightforward to implement, since they just require the selection of appropriate confidence limit to avoid false detection. The proposed hybrid approach is promising for systems where a first principles model is cumbersome to obtain.

01 COAL, LIGNITE, AND PEAT↗