Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HALL EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Topological antiferromagnetic semimetal for spintronics: A case study of a layered square-net system EuZnSb 2

Here, we use the first-principles and effective Hamiltonian methods to study the electronic structure and magnetic properties of a recently synthesized layered antiferromagnetic square-net topological semimetal EuZnSb2 [Phys. Rev. Res. 2, 033462 (2020)]. The main message of the paper is that effects of small changes in the band structure produced by the magnetic ordering and changes in the orientation of the Néel vector are amplified in such transport properties as the spin Hall conductivity. We predict that the effects of the broken symmetry introduced by the ordering of the Néel vector, being very weak in the bulk, are pronounced in the surface electronic dispersion, suggesting that surface probes may be more suited to measure them. The coexistence of the magnetism with many other competing phases make this material interesting and possibly useful for quantum spintronics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Anomalous Hall Crystals in Rhombohedral Multilayer Graphene. I. Interaction-Driven Chern Bands and Fractional Quantum Hall States at Zero Magnetic Field

Recent experiments on rhombohedral pentalayer graphene with a substrate-induced moiré potential have identified both Chern insulators and fractional quantum Hall states at zero magnetic field. Surprisingly, these states are observed in strong displacement fields where the effects of the moiré lattice are weak, and seem to be readily accessed without fine-tuning. To address these experimental puzzles, we study a model of interacting electrons in this geometry. Within self-consistent Hartree-Fock (SCHF) calculations, we find an isolated Chern band with small bandwidth and good quantum geometry. Exact diagonalization and density-matrix renormalization group calculations both confirm the band hosts fractional quantum Hall states without a magnetic field. Remarkably, the Chern band is stable at a wide range of angles, at four through six rhombohedral layers, at varying rhombohedral hopping parameters, and—most strikingly—survives in SCHF calculations when the moiré potential vanishes. In this limit, the state spontaneously breaks time-reversal and translation symmetry simultaneously, giving a topological crystalline state that we term the “anomalous Hall crystal.” We argue this is a general mechanism to create stable Chern bands in rhombohedral multilayer graphene, opening the door to studying the interplay between electronic topology, fractionalization, and spontaneous translation symmetry breaking.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nanocrystalline Materials: Synthesis, Characterization, Properties, and Applications

Nanostructuring is a commonly employed method of obtaining superior mechanical properties in metals and alloys. Compared to conventional polycrystalline counterparts, nanostructuring can provide remarkable improvements in yield strength, toughness, fatigue life, corrosion resistance, and hardness, which is attributed to the nano grain size. In this review paper, the current state-of-the-art of synthesis methods of nanocrystalline (NC) materials such as rapid solidification, chemical precipitation, chemical vapor deposition, and mechanical alloying, including high-energy ball milling (HEBM) and cryomilling was elucidated. More specifically, the effect of various process parameters on mechanical properties and microstructural features were explained for a broad range of engineering materials. This study also explains the mechanism of grain strengthening using the Hall-Petch relation and illustrates the effects of post-processing on the grain size and subsequently their properties. This review also reports the applications, challenges, and future scope for the NC materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nernst–Ettingshausen effect in thin Pt and W films at low temperatures

As spin caloritronic measurements become increasingly common techniques for characterizing material properties, it is important to quantify potentially confounding effects. We report measurements of the Nernst–Ettingshausen response from room temperature to 5 K in thin film wires of Pt and W, metals commonly used as inverse spin Hall detectors in spin Seebeck characterization. Johnson–Nyquist noise thermometry is used to assess the temperature change in the metals with heater power at low temperatures, and the thermal path is analyzed via finite-element modeling. The Nernst–Ettingshausen response of W is found to be approximately temperature-independent, while the response of Pt increases at low temperatures. Furthermore, these results are discussed in the context of theoretical expectations and the possible role of magnetic impurities in Pt.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Drive dependence of the Hall angle for a sliding Wigner crystal in a magnetic field

We numerically examine the depinning and sliding dynamics of a Wigner crystal in the presence of quenched disorder and a magnetic field. In the disorder-free limit, the Wigner crystal Hall angle is independent of crystal velocity, but when disorder is present, we find that the Hall angle starts near zero at the depinning threshold and increases linearly with increasing drive before reaching a saturation close to the disorder free value at the highest drives. The drive dependence is the result of a side jump effect produced when the charges move over pinning sites. The magnitude of the side jump is reduced at the higher velocities. Here, the drive dependent Hall angle is robust for a wide range of disorder parameters and should be a generic feature of classical charges driven in the presence of quenched disorder and a magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Hall instability driven seeding of helical magneto-Rayleigh–Taylor instabilities in axially premagnetized thin-foil liner Z-pinch implosions

Helical magneto-Rayleigh–Taylor instability (MRTI) structures have been observed in z-pinch-driven liner implosion experiments with a pre-imposed axial magnetic field. We show that the formation of these helical structures can be described by a Hall magnetohydrodynamical (HMHD) model. We used the 3D extended magnetohydrodynamics simulation code PERSEUS (which includes Hall physics) [Seyler and Martin, Phys. Plasmas 18, 012703 (2011)] to study these helical instabilities and show that a Hall interchange instability in low-density coronal plasma immediately surrounding the dense liner is responsible for producing helically oriented effects in the magnetic field and current density within the coronal layer. Here, this seeds the helical pitch angle of the MRTI even when other proposed helical seeding mechanisms are either not present in the experiments or not accounted for in the simulations. For example, this mechanism does not require low-density power-feed plasmas to be swept in from large radius or the development of electrothermal instabilities. The Hall Instability is, thus, a new, independent explanation for the origin of the helical instabilities observed in axially premagnetized liner experiments. Simulation results supporting this mechanism are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Physics of the Inverted Harmonic Oscillator: From the lowest Landau level to event horizons

In this work, we present the inverted harmonic oscillator (IHO) Hamiltonian as a paradigm to understand the quantum mechanics of scattering and time-decay in a diverse set of physical systems. As one of the generators of area preserving transformations, the IHO Hamiltonian can be studied as a dilatation generator, squeeze generator, a Lorentz boost generator, or a scattering potential. In establishing these different forms, we demonstrate the physics of the IHO that underlies phenomena as disparate as the Hawking–Unruh effect and scattering in the lowest Landau level (LLL) in quantum Hall systems. We derive the emergence of the IHO Hamiltonian in the LLL in a gauge invariant way and show its exact parallels with the Rindler Hamiltonian that describes quantum mechanics near event horizons. This approach of studying distinct physical systems with symmetries described by isomorphic Lie algebras through the emergent IHO Hamiltonian enables us to reinterpret geometric response in the lowest Landau level in terms of relativistic effects such as Wigner rotation. Further, the analytic scattering matrix of the IHO points to the existence of quasinormal modes (QNMs) in the spectrum, which have quantized time-decay rates. We present a way to access these QNMs through wave packet scattering, thus proposing a novel effect in quantum Hall point contact geometries that parallels those found in black holes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

The effects of heat treatment on the response of WE43 Mg alloy: crystal plasticity finite element simulation and SEM-DIC experiment

The present report addressed the effects of heat treatment on the mechanical response of a WE43 Mg alloy using an integrated framework of SEM-DIC experiment and CPFE simulation. Both macroscopic responses including yield strength, ultimate strength, ductility, and microscopic responses, including local displacement and strain maps, were experimentally investigated. The focus of this work is to use the CPFE simulation as an integrated computational tool to study the effects of heat treatment. The CPFE framework was evaluated using the local fields of displacement and strain obtained from the SEM-DIC experiment rather than the conventional scheme of using macroscopic responses at different loading directions. Subsequently, the information which is available using CPFE, such as the critical resolved shear stress (CRSS) and relative slip activity, was used to study the effects of heat treatment on the response of WE43 Mg alloy. The contributions of different strengthening mechanisms on the CRSS were addressed. The results show that effects of heat treatment can be captured using the predominant mechanisms of the grain size effect and the influence of precipitates. Finally, it has been shown that classical Hall-Petch in which one constant can capture the size effects, should be modified. To do so, each deformation mode should have a unique Hall-Petch constant, which are calculated here for the WE43 Mg alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2024

SU(4) symmetry breaking and induced superconductivity in graphene quantum Hall edges

In graphene, the approximate SU(4) symmetry associated with the spin and valley degrees of freedom in the quantum Hall (QH) regime is reflected in the fourfold degeneracy of graphene’s Landau levels (LLs). Interactions and the Zeeman effect break such approximate symmetry and lift the corresponding degeneracy of the LLs. We study how the breaking of the approximate SU(4) symmetry affects the properties of graphene’s QH edge modes located in proximity to a superconductor. We show how the lifting of the fourfold degeneracy qualitatively modifies the transport properties of the QH-superconductor heterojunction. For the zero LL, by placing the edge modes in proximity to a superconductor, it is, in principle, possible to realize a 1D topological superconductor supporting Majoranas in the presence of sufficiently strong Zeeman field. Here, we estimate the topological gap of such a topological superconductor and relate it to the properties of the QH-superconductor interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRSDate not supplied

Effects of Background Pressure and Electrical Configuration on the Velocity Field of the HERMeS Hall Thruster

A Laser-Induced Fluorescence test was performed during risk reduction testing on the HERMeS Hall thruster. This article focuses on the portion of the test to study trends in the ion acceleration characteristics with varying anode mass flow rate, background pressure, and electrical configuration. The acceleration zone of the HERMeS Hall thruster was observed to move upstream as the anode mass flow rate decreased and upstream as the background pressure increased. Examination of the characteristics of the ions near the pole covers suggested the possibility that thruster was no longer magnetically shielded at the extreme conditions of very low anode mass flow rate and high background pressure. The acceleration zone was also observed to move slightly upstream when the thruster body was floated as opposed to cathode-tied and did not move appreciably when the thruster body was grounded to the vacuum facility. Characteristics of the ions bombarding the pole covers did not vary across the tested electrical configurations.

Electric Propulsion↗
DOE OSTI2024

Measurement of the Pion Exclusive Electro-Production Cross-Section in the E12-19-006 Experiment in Hall-C at Jefferson Lab

One of the most effective methods for exploring the transition from hadronic degrees of freedom to quark-gluon degrees of freedom in Quantum Chromodynamics (QCD) is through the investigation of \exclusive" pion and kaon electro-production reactions at various Q2 and ?t values. The E12-19-006 experiment is conducted within the confi?nes of experimental Hall C at the Thomas Jefferson National Accelerator Facility, USA, for such studies. The primary aim of the experiment is to ?first enhance our comprehension of the pion electro-production cross-section and its form factor at Q2 = 0.38 and 0.42 GeV2. This is the fi?rst run period of the E12-19-006 experiment which ran in summer 2019. A more profound understanding of the pion electro-production reaction, 1H(e,e'?+)n, at low Q2 is deemed essential to employ this electro-production reaction (an indirect technique) for the high Q2 studies, thereby delving deeper into the realm of QCD. Consequently, this dissertation presents a thorough analysis of the experimental data acquired in the ?first run period of the E12-19-006 experiment. In pursuit of precision, a series of systematic studies (target boiling correction study, the elastic reaction cross-section measurements, study for determining vari- ous kinematics o?sets, etc.) are conducted to discern the accuracy of the analyzed data, a prerequisite for the use of Rosenbluth separation technique to separate the pion electro-production cross-section terms in t bins. The separated pion electro-production cross-section through the Rosenbluth separation technique is then used to extract the pion electromagnetic form factor. In this dissertation, the pion electro-production cross-section is carefully dissected into its four constituent components: longitudinal (?L), transverse (?T ), longitudinal-transverse (?LT ), and transverse-transverse (?TT ), using the full version of Rosenbluth separation technique for the Q2 = 0.38 GeV2. The technique is simultaneously fi?tted to the unseparated pion electro-production cross-sections at the three values of polarization of the virtual photon (?), i.e., ? = 0.286, 0.629 and 0.781. An iterative process is applied to re?ne the parameters of the model cross-sections until the yield ratio of experimental and Monte Carlo simulation converges. In this study, 21 iterations are conducted to re?ne the model cross-section parameters. The fi?nal pion electro-production cross-section terms are then determined for 7 t bins using the optimized parameters of the model cross-sections.

Kumar, Vijay↗
DOE OSTI2021

From weak antilocalization to Kondo scattering in a magnetic complex oxide interface

Quantum corrections to electrical resistance can serve as sensitive probes of the magnetic landscape of a material. For example, interference between time-reversed electron paths gives rise to weak localization effects, which can provide information about the coupling between spins and orbital motion, while the Kondo effect is sensitive to the presence of spin impurities. In this work, we use low-temperature magnetotransport measurements to reveal a gradual transition from weak antilocalization (WAL) to Kondo scattering in the quasi-two-dimensional electron gas formed at the interface between SrTiO 3 and the Mott insulator NdTiO 3 . This transition occurs as the thickness of the NdTiO 3 layer is increased. Analysis of the Kondo scattering and WAL points to the presence of atomic-scale magnetic impurities coexisting with nanoscale magnetic regions that affect transport via a strong magnetic exchange interaction. This leads to distinct magnetoresistance behaviors that can serve as a sensitive probe of magnetic properties in two dimensions.

36 MATERIALS SCIENCE↗
NASA NTRS1987

Ductility and fracture in B2 FeAl alloys

The mechanical behavior of B2FeAl alloys was studied. Stoichiometric Fe-50Al exhibits totally brittle behavior while iron-rich Fe-40Al yields and displays about 3% total strain. This change in behavior results from large decreases in the yield strength with iron-rich deviations from stoichiometry while the fracture stress remains essentially constant. Single crystal studies show that these yield strength decreases are directly related to decreases in the critical resolved shear stress for a group of zone axes /111/ set of (110) planes slip. This behavior is rationalized in terms of the decrease in antiphase boundary energy with decreasing aluminum content. The addition of boron results in improvements in the mechanical behavior of alloys on the iron-rich side of stoichiometry. These improvements are increased brittle fracture stresses of near-stoichiometric alloys, and enhanced ductility of up to 6% in Fe-40Al. These effects were attributed to increased grain boundary adhesion as reflected by changes in fracture mode from intergranular to transgranular failure. The increases in yield strength, which are observed in both polycrystals and single crystals, result from the quenching in of large numbers of thermal vacancies. Hall-Petch plots show that the cooling rate effects are a direct result of changes in the Hall-Petch intercept/lattice resistance flow.

Crimp, Martin A.↗
DOE OSTI2020

Flat bands and ferrimagnetic order in electronically correlated dice-lattice ribbons

In this work, we study ribbons of the dice two-dimensional lattice (that we call “dice ladders”) known to have nontrivial topological properties, such as Chern numbers 2. Our main results are two fold. (1) Analyzing the tight-binding model in the presence of Rashba spin-orbit coupling and an external magnetic field, we observed that dice ladders qualitatively display properties similar to their two-dimensional counterpart all the way to the limit of only two legs in the short direction. This includes flat bands near the Fermi level, edge currents and edge charge localization near zero energy when open boundary conditions are used, two chiral edge modes, and a nonzero Hall conductance. (2) We studied the effect of Hubbard correlation U in the two-leg dice ladder using Lanczos and density matrix renormalization group techniques. We show that by increasing U the flat bands split without the need of introducing external fields. Moreover, robust ferrimagnetic order develops. Overall, our work establishes dice ladders as a promising playground to study the combined effect of topology and correlation effects, one of the frontiers in quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗