Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fusion Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Plasma enhanced atomic layer batch processing of aluminum doped titanium dioxide

Among many promising high-k dielectrics, TiO{sub 2} is an interesting candidate because of its relatively high k value of over 40 and its easy integration into existing semiconductor manufacturing schemes. The most critical issues of TiO{sub 2} are its low electrical stability and its high leakage current density. However, doping TiO{sub 2} with Al has shown to yield significant improvement of layer quality on Ru electrodes [S. K. Kim et al., Adv. Mater. 20, 1429 (2008)]. In this work we investigated if atomic layer deposition (ALD) of Al doped TiO{sub 2} is feasible in a batch system. Electrical characterizations were done using common electrode materials like TiN, TaN, or W. Additionally, the effect of plasma enhanced processing in this reactor was studied. For this investigation a production batch ALD furnace has been retrofitted with a plasma source which can be used for post deposition anneals with oxygen radicals as well as for directly plasma enhanced ALD. After evaluation of several Ti precursors a deposition process for AlTiO{sub x} with excellent film thickness and composition uniformity was developed. The effects of post deposition anneals, Al{sub 2}O{sub 3} interlayers between electrode and TiO{sub 2}, Al doping concentration, plasma enhanced deposition and electrode material type on leakage current density are shown. An optimized AlTiO{sub x} deposition process on TaN electrodes yields to leakage current density of 5 x 10{sup -7} A/cm{sup 2} at 2 V and k values of about 35. Thus, it could be demonstrated that a plasma enhanced batch ALD process for Al doped TiO{sub 2} is feasible with acceptable leakage current density on a standard electrode material.

36 MATERIALS SCIENCE↗

Abatement of CF{sub 4} and CHF{sub 3} byproducts using low-pressure plasmas generated by annular-shaped electrodes

Three different driving schemes are tested for a plasma reactor designed to abate the greenhouse gases emitted by the semiconductor industry. The reactor and electrodes all have a concentric annular shape, which allows them to be easily connected to pre-existing pipelines without any disturbance to the exhaust stream. The destruction and removal efficiencies are measured for CF{sub 4} by varying the O{sub 2}/CF{sub 4} ratio and pressure. The influences of adding O{sub 2} and H{sub 2}O to the byproducts of the CHF{sub 3} abatement process are investigated by analyzing the spectra resulting from Fourier transform infrared spectroscopy measurements. Based on the experimental results we suggest an appropriate combination of driving scheme and reactant gas species for efficient and economical abatement of a mixture of CHF{sub 3} and CF{sub 4}. Then, the optimal flow rate of the reactant gas is presented. Finally, the reduction rates for global warming emissions are estimated to demonstrate the feasibility of using our device for abatement of greenhouse gases emitted by the semiconductor industry.

54 ENVIRONMENTAL SCIENCES↗

Plasma-enhanced and thermal atomic layer deposition of Al{sub 2}O{sub 3} using dimethylaluminum isopropoxide, [Al(CH{sub 3}){sub 2}({mu}-O{sup i}Pr)]{sub 2}, as an alternative aluminum precursor

The authors have been investigating the use of [Al(CH{sub 3}){sub 2}({mu}-O{sup i}Pr)]{sub 2} (DMAI) as an alternative Al precursor to [Al(CH{sub 3}){sub 3}] (TMA) for remote plasma-enhanced and thermal ALD over wide temperature ranges of 25-400 and 100-400 deg. C, respectively. The growth per cycle (GPC) obtained using in situ spectroscopic ellipsometry for plasma-enhanced ALD was 0.7-0.9 A/cycle, generally lower than the >0.9 A/cycle afforded by TMA. In contrast, the thermal process gave a higher GPC than TMA above 250 deg. C, but below this temperature, the GPC decreased rapidly with decreasing temperature. Quadrupole mass spectrometry data confirmed that both CH{sub 4} and HO{sup i}Pr were formed during the DMAI dose for both the plasma-enhanced and thermal processes. CH{sub 4} and HO{sup i}Pr were also formed during the H{sub 2}O dose but combustion-like products (CO{sub 2} and H{sub 2}O) were observed during the O{sub 2} plasma dose. Rutherford backscattering spectrometry showed that, for temperatures >100 deg. C and >200 deg. C for plasma-enhanced and thermal ALD, respectively, films from DMAI had an O/Al ratio of 1.5-1.6, a H content of {approx}5 at. % and mass densities of 2.7-3.0 g cm{sup -3}. The film compositions afforded from DMAI were comparable to those from TMA at deposition temperatures {>=}150 deg. C At lower temperatures, there were differences in O, H, and C incorporation. 30 nm thick Al{sub 2}O{sub 3} films from the plasma-enhanced ALD of DMAI were found to passivate n- and p-type Si floatzone wafers ({approx}3.5 and {approx}2 {Omega} cm, respectively) with effective carrier lifetimes comparable to those obtained using TMA. Surface recombination velocities of < 3 and < 6 cm s{sup -1} were obtained for the n- and p-type Si, respectively. Using these results, the film properties obtained using DMAI and TMA are compared and the mechanisms for the plasma-enhanced and thermal ALD using DMAI are discussed.

36 MATERIALS SCIENCE↗

Pulsed high-density plasmas for advanced dry etching processes

Plasma etching processes at the 22 nm technology node and below will have to satisfy multiple stringent scaling requirements of microelectronics fabrication. To satisfy these requirements simultaneously, significant improvements in controlling key plasma parameters are essential. Pulsed plasmas exhibit considerable potential to meet the majority of the scaling challenges, while leveraging the broad expertise developed over the years in conventional continuous wave plasma processing. Comprehending the underlying physics and etching mechanisms in pulsed plasma operation is, however, a complex undertaking; hence the full potential of this strategy has not yet been realized. In this review paper, we first address the general potential of pulsed plasmas for plasma etching processes followed by the dynamics of pulsed plasmas in conventional high-density plasma reactors. The authors reviewed more than 30 years of academic research on pulsed plasmas for microelectronics processing, primarily for silicon and conductor etch applications, highlighting the potential benefits to date and challenges in extending the technology for mass-production. Schemes such as source pulsing, bias pulsing, synchronous pulsing, and others in conventional high-density plasma reactors used in the semiconductor industry have demonstrated greater flexibility in controlling critical plasma parameters such as ion and radical densities, ion energies, and electron temperature. Specifically, plasma pulsing allows for independent control of ion flux and neutral radicals flux to the wafer, which is key to eliminating several feature profile distortions at the nanometer scale. However, such flexibility might also introduce some difficulty in developing new etching processes based on pulsed plasmas. Therefore, the main characteristics of continuous wave plasmas and different pulsing schemes are compared to provide guidelines for implementing different schemes in advanced plasma etching processes based on results from a particularly challenging etch process in an industrial reactor.

36 MATERIALS SCIENCE↗

Nanopillar ITO electrodes via argon plasma etching

The authors demonstrate the formation of vertically aligned indium tin oxide (ITO) nanopillars by exposing planar ITO films to Ar plasma, the conditions of which determine the size, spacing, and aspect ratio of the pillars. Annealing in air and forming gas is used to recover and optimize the optical transmittance and electrical conductivity of the nanopillar films. The final product is an ITO film whose superior optical transmittance and strong electrical conductivity combine with its robust columnar morphology and processing scalability to make it suitable for use in highly absorbing organic solar cells.

36 MATERIALS SCIENCE↗

Can surface cracks and unipolar arcs explain breakdown and gradient limits?

The authors argue that the physics of unipolar arcs and surface cracks can help understand rf breakdown and vacuum arc data. They outline a model of the basic mechanisms involved in breakdown and explore how the physics of unipolar arcs and cracks can simplify the picture of breakdown and gradient limits in accelerators, tokamaks as well as laser ablation, micrometeorites, and other applications. Cracks are commonly seen in SEM images of arc damage and they are produced as the liquid metal cools. They can produce the required field enhancements to explain field emission data and can produce mechanical failure of the surface that would trigger breakdown events. Unipolar arcs can produce currents sufficient to short out rf structures, and can cause the sort of damage seen in SEM images. They should be unstable, and possibly self-quenching, as seen in optical fluctuations and surface damage. The authors describe some details and consider the predictions of this simple model.

36 MATERIALS SCIENCE↗

Reorganization of graphite surfaces into carbon micro- and nanoparticles under high flux hydrogen plasma bombardment

Fine-grain graphite samples were exposed to high density low temperature (n{sub e}{approx}10{sup 20} m{sup -3}, T{sub e}{approx}1 eV) hydrogen plasmas in the Pilot-PSI linear plasma generator. Redeposition of eroded carbon is so strong that no external precursor gas injection is necessary for deposits to form on the exposed surface during the bombardment. In fact, up to 90% of carbon is redeposited, most noticeably in the region of the highest particle flux. The redeposits appear in the form of carbon microparticles of various sizes and structures. Discharge parameters influence the efficiency of the redeposition processes and the particle growth rate. Under favorable conditions, the growth rate reaches 0.15 {mu}m/s. The authors used high resolution scanning electron microscopy and transmission electron microscopy to study the particle growth mode. The columnar structure of some of the large particles points toward surface growth, while observation of the spherical carbon nanoparticles indicates growth in the plasma phase. Multiple nanoparticles can agglomerate and form bigger particles. The spherical shape of the agglomerates suggests that nanoparticles coalesce in the gas phase. The erosion and redeposition patterns on the samples are likely determined by the gradients in plasma flux density and surface temperature across the surface.

36 MATERIALS SCIENCE↗

Low ion energy RF reactor using an array of plasmas through a grounded grid

A reactor using localized remote plasma in a grid electrode is presented in this study. The aim is to reduce the ion bombardment energy inherent in RF capacitively coupled parallel plate reactors used to deposit large area thin film silicon solar cells. High ion bombardment energy could cause defects in silicon layers and deteriorate electrical interfaces, therefore, by reducing the ion bombardment energy, lower defect density might be obtained. In this study, the low ion bombardment energy results from the reactor design. By inserting a grounded grid close to the RF electrode of a parallel plate reactor, the electrode area asymmetry is increased while retaining the lateral uniformity required for large area deposition. This asymmetry causes a strong negative self-bias voltage, which reduces the time-averaged plasma potential and thus lowers the ion bombardment energy. In addition to the self-bias, the time evolution of plasma light emission and plasma potential RF waveform are also affected by the grid, thereby further reducing the time-averaged plasma potential and ion bombardment energy. Finally, a good correlation between the measured time-averaged plasma potential and measured low ion bombardment energy is found in a broad range of RF voltages.

36 MATERIALS SCIENCE↗

Effects of O 2 plasma and UV-O 3 assisted surface activation on high sensitivity metal oxide functionalized multiwalled carbon nanotube CH 4 sensors

We present a comparative analysis of UV-O 3 (UVO) and O 2 plasma-based surface activation processes of multi-walled carbon nanotubes (MWCNTs) enabling highly effective functionalization with metal oxide nanocrystals (MONCs). Experimental results from transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy show that by forming COOH (carboxyl), C-OH (hydroxyl), and C=O (carbonyl) groups on the MWCNT surface that act as active nucleation sites, O 2 plasma and UVO-based dry pre-treatment techniques greatly enhance the affinity between MWCNT surface and the functionalizing MONCs. MONCs, such as ZnO and SnO 2 , deposited by atomic layer deposition (ALD) technique, were implemented as the functionalizing material following UVO and O 2 plasma activation of MWCNTs. In conclusion, a comparative study on the relative resistance changes of O 2 plasma and UVO activated MWCNT functionalized with MONC in the presence of 10 ppm methane (CH 4 ) in air, is presented as well.

47 OTHER INSTRUMENTATION↗

Autonomous hybrid optimization of a SiO 2 plasma etching mechanism

Computational modeling of plasma etching processes at the feature scale relevant to the fabrication of nanometer semiconductor devices is critically dependent on the reaction mechanism representing the physical processes occurring between plasma produced reactant fluxes and the surface, reaction probabilities, yields, rate coefficients, and threshold energies that characterize these processes. The increasing complexity of the structures being fabricated, new materials, and novel gas mixtures increase the complexity of the reaction mechanism used in feature scale models and increase the difficulty in developing the fundamental data required for the mechanism. This challenge is further exacerbated by the fact that acquiring these fundamental data through more complex computational models or experiments is often limited by cost, technical complexity, or inadequate models. In this paper, we discuss a method to automate the selection of fundamental data in a reduced reaction mechanism for feature scale plasma etching of SiO 2 using a fluorocarbon gas mixture by matching predictions of etch profiles to experimental data using a gradient descent (GD)/Nelder–Mead (NM) method hybrid optimization scheme. These methods produce a reaction mechanism that replicates the experimental training data as well as experimental data using related but different etch processes.

36 MATERIALS SCIENCE↗

Influence of molecular clustering on the interpretation of diffractograms of hydrocarbon films from tokamak T-10

The influence of molecular clustering on the formerly suggested interpretation of diffraction patterns of hydrocarbon films formed in the vacuum vessel of the tokamak T-10 is analyzed numerically. The simulation of clustering of simple hydrocarbon molecules C(D, H){sub 4}, C{sub 2}(D, H){sub 4}, and C{sub 6}(D, H){sub 6} and molecules composed of curved graphene (fullerenes and toroidal nanotubes) is carried out with the rigid body molecular dynamics method. It is shown that formerly neglected atomic correlations C–C and C–D(H) in the amorphous hydrocarbon component decrease the calculated values of the scattered intensity in the range of scattering vector modulus 5 < q < 20 nm{sup –1} because of homogenization of scatters on the spatial scale of ∼1 nm. The allowance for these correlations does not change the diffraction patterns in the range q > 20 nm{sup –1}. The results suggest the necessity to introduce to the procedure of determining the structural content of the films, similar to those from the tokamak T-10, the clusters formed by the van der Waals adhesion of hydrocarbon molecules to “graphene” nanoparticles. This simplifies the mathematical optimization to the former level of complexity—but for an extended ensemble of objects—and makes it possible to calculate the diffraction patterns of these objects using the distributed computing resources. A modified algorithm of structural content identification on the basis of joint X-ray and neutron diffractometry is suggested.

36 MATERIALS SCIENCE↗

Experimental investigation on spectral-energy efficiency of femtosecond laser ablation of metals

Results of investigation on spectral-energy thresholds, rates, and mass flow rates of laser ablation of structural materials (Cu, Ti, Zr, Nb, Mo) of high-energy photonics are presented. The data were obtained by means of an experimental diagnostic module developed for study of multifactor interaction processes between UV-near IR femtosecond laser pulse radiation and condensed media in vacuum.

36 MATERIALS SCIENCE↗

Effect of microplasma discharges on aluminum surfaces

Excitation of microplasma discharges on the surfaces of V95 aluminum alloy samples placed in a uniform pulsed plasma flow was studied experimentally. Strong localized interaction of microplasma discharges with aluminum leads to the melting and subsequent fast cooling of micrometer-size regions on the sample surface. Due to the multiple action of microplasma discharges, a continuous remelted layer with a thickness of up to 20 {mu}m forms on the aluminum surface. The physical, structural, and tribotechnical properties of this layer differ substantially from those before microplasma processing.

36 MATERIALS SCIENCE↗

Epitaxial synthesis of diamond layers on a monocrystalline diamond substrate in a torch microwave plasmatron

The epitaxial growth of a diamond single-crystal film in a torch microwave discharge excited by a magnetron of a domestic microwave oven with the power of {<=}1 kW in an argon-hydrogen-methane mixture with a high concentration of methane (up to 25% with respect to hydrogen) at atmospheric pressure on a sub-strate of a synthetic diamond single crystal (HPHP) with the orientation (100) and 4 Multiplication-Sign 4 mm in size is obtained. A discharge with the torch diameter of {approx}2 mm and the concentration of the microwave power absorbed in the torch volume of >10{sup 3} W/cm{sup 3} is shown to be effective for epitaxial enlargement of a single crystal of synthetic diamond. The structure of the deposited film with the thickness up to 10 {mu}m with high-quality morphology is investigated with an optical microscope as well as using the methods of the Raman scattering and scanning electron microscopy.

36 MATERIALS SCIENCE↗

Anodization of aluminum and silicon in plasma of a non-self-sustained glow discharge

The results of anodization of aluminum and silicon in an oxygen plasma are presented. The plasma was generated by a non-self-sustained glow discharge with a hollow cathode excited by an electron beam at the oxygen pressure of 20 Pa. The density of the current flowing through the anodized specimen did not exceed 1.5 mA/cm{sup 2}, and its temperature was 200-250 Degree-Sign C. Continuous Al{sub 2}O{sub 3} and SiO{sub 2} films were formed on the aluminum and silicon surfaces. The growth rate of the oxide layers was 150-200 nm/h for Al{sub 2}O{sub 3} and 400-800 nm/h for SiO{sub 2}.

36 MATERIALS SCIENCE↗

Study of Pyrex and quartz insulators contamination effect on the X-ray intensity in a 4-kJ plasma focus device

The variation of the X-ray intensity has been investigated with the Pyrex and quartz insulators surface contamination in a 4-kJ plasma focus device with argon gas at 11.5-kV charging voltage. Elemental analysis (EDAX) showed that the Cu evaporated from the electrode material and was deposited on the sleeve surface improves the breakdown conditions. A small level of sleeve contamination by copper is found to be essential for good focusing action and high HXR intensity. The SEM imaging showed the grain-type structure of Cu formed on the surface and it changed the surface property. Resistance measurements of original and coated Pyrex surface proved that the copper deposition on the sleeve surface will reduce its resistance as compared to the almost infinitely large resistance of the uncontaminated sleeve. As the contamination is surpassed to some critical level, the HXR intensity from the device is deteriorated.

36 MATERIALS SCIENCE↗

Inactivation of possible microorganism food contaminants on packaging foils using nonthermal plasma and hydrogen peroxide

The inactivation effect of nonthermal plasma generated in electric discharge burning in air atmosphere with water or hydrogen peroxide aerosol for the application to the microbial decontamination of packaging foils is studied. The microbial inactivation is studied on two bacterial, two yeasts, and two filamentous micromycete species. The inactivation of all contaminating microorganisms becomes on the area of full 8.5 cm in diameter circular sample after short times of several tens of seconds. Described apparatus may present a possible alternative method of microbial decontamination of food packaging material or other thermolabile materials.

60 APPLIED LIFE SCIENCES↗