Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Formation factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Effect of frictional heating on brake materials

An exploratory study of the properties of aircraft brake materials was made to determine ways of improving friction and wear behavior while minimizing surface temperatures. It is found that frictional variation at high temperature involves material softening and metal transfer, formation of oxides, and surface melting. The choice of proper materials to combat these effects is discussed. Minimum surface temperatures are found to result from use of materials with large density-specific heat and density-specific heat-conductivity factors, use of a higher load-lower friction system, and maximization of the contact area. Some useful trade-off criteria for the size of brake disks against weight considerations are suggested. Additional information on material behavior and peak braking temperatures was gathered from an inspection of used brake pads and rotor disks.

Ho, T.-L.↗
NASA NTRS1975

Surface compositional mapping by spectral ratioing of ERTS-1 MSS data in the Wind River Basin and Range, Wyoming

The author has identified the following significant results. ERTS data collected in August and October 1972 were processed on digital and special purpose analog recognition computers using ratio enhancement and pattern recognition. Ratios of band-averaged laboratory reflectances of some minerals and rock types known to be in the scene compared favorably with ratios derived from the data by ratio normalization procedures. A single ratio display and density slice of the visible channels of ERTS MSS data, Channel 5/Channel 4 (R5,4), separated the Triassic Chugwater formation (redbeds) from other formations present and may have enhanced iron oxide minerals present at the surface in abundance. Comparison of data sets collected over the same area at two different times of the year by digital processing indicated that spectral variation due to environmental factors was reduced by ratio processing.

Vincent, R. K.↗
NASA NTRS1975

Semiperiodic variations in CO2 abundance on Venus

Tests of the uniqueness of periodicity in the strength of the P branch (P2-P38) of the 8689 A CO2 band on Venus are described. It was found that the observed 4-day periodicity was not unique. The periodicity indicated an increasing asymmetry between the northern and southern hemispheres with approach to inferior conjunction or with increasing phase angle. When the slit positions of the various scans were referred to the planet or atmospheric equator rather than to the intensity equator, at inferior conjunction, the slit positions having a factor of two greater CO2 abundance or line strength were over the polar latitudes of the atmosphere. Similarly, the lower-abundance slit positions were over the equatorial latitudes of the atmosphere. It is thus concluded that the level of line formation must be lower over polar latitudes than over equatorial regions.

Barker, E. S.↗
NASA NTRS1992

Catastrophic loss of stratospheric ozone in dense volcanic clouds

Rapid, localized loss of ozone is predicted to occur in the midlatitude and tropical stratosphere in the presence of very large concentrations of sulfate aerosols. Volcanic eruptions can increase the effective surface area of sulfuric acid so that heterogeneous reactions involving ClONO2, and secondarily N2O5, are able to suppress NO(x) abundances by more than a factor of 10 relative to gas phase chemistry. When NO(x) levels fall below a threshold, e.g., 0.6 ppb at 24 km in mid-latitudes, the chlorine-catalyzed loss of O3 proceeds at rates comparable to those during the formation of the Antarctic ozone hole, more than 50 ppb per day. If such losses occurred following the eruption of Mount Pinatubo in the most volcanically perturbed regions over the tropics and mid-latitudes, this model predicts that they are driven primarily by the suppression of NO(x) below these critical levels. The increase in stratospheric chlorine since El Chichon has made Mount Pinatubo more than twice as effective in causing rapid O3 loss.

Prather, Michael↗
NASA NTRS2012

Fabrication of an Absorber-Coupled MKID Detector

Absorber-coupled microwave kinetic inductance detector (MKID) arrays were developed for submillimeter and far-infrared astronomy. These sensors comprise arrays of lambda/2 stepped microwave impedance resonators patterned on a 1.5-mm-thick silicon membrane, which is optimized for optical coupling. The detector elements are supported on a 380-mm-thick micro-machined silicon wafer. The resonators consist of parallel plate aluminum transmission lines coupled to low-impedance Nb microstrip traces of variable length, which set the resonant frequency of each resonator. This allows for multiplexed microwave readout and, consequently, good spatial discrimination between pixels in the array. The transmission lines simultaneously act to absorb optical power and employ an appropriate surface impedance and effective filling fraction. The fabrication techniques demonstrate high-fabrication yield of MKID arrays on large, single-crystal membranes and sub-micron front-to-back alignment of the micro strip circuit. An MKID is a detector that operates upon the principle that a superconducting material s kinetic inductance and surface resistance will change in response to being exposed to radiation with a power density sufficient to break its Cooper pairs. When integrated as part of a resonant circuit, the change in surface impedance will result in a shift in its resonance frequency and a decrease of its quality factor. In this approach, incident power creates quasiparticles inside a superconducting resonator, which is configured to match the impedance of free space in order to absorb the radiation being detected. For this reason MKIDs are attractive for use in large-format focal plane arrays, because they are easily multiplexed in the frequency domain and their fabrication is straightforward. The fabrication process can be summarized in seven steps: (1) Alignment marks are lithographically patterned and etched all the way through a silicon on insulator (SOI) wafer, which consists of a thin silicon membrane bonded to a thick silicon handle wafer. (2) The metal microwave circuitry on the front of the membrane is patterned and etched. (3) The wafer is then temporarily bonded with wafer wax to a Pyrex wafer, with the SOI side abutting the Pyrex. (4) The silicon handle component of the SOI wafer is subsequently etched away so as to expose the membrane backside. (5) The wafer is flipped over, and metal microwave circuitry is patterned and etched on the membrane backside. Furthermore, cuts in the membrane are made so as to define the individual detector array chips. (6) Silicon frames are micromachined and glued to the silicon membrane. (7) The membranes, which are now attached to the frames, are released from the Pyrex wafer via dissolution of the wafer wax in acetone.

Brown, Ari↗
NASA NTRS2022

The 21-cm Signal From the Cosmic Dawn: Metallicity Dependence of High Mass X-Ray Binaries

X-rays from high-mass X-ray binaries (HMXBs) are likely the main source of heating of the intergalactic medium (IGM) during Cosmic Dawn (CD), before the completion of reionization. This Epoch of Heating (EoH; z ∼10–15) should soon be detected via the redshifted 21-cm line from neutral hydrogen, allowing us to indirectly study the properties of HMXBs in the unseen, first galaxies. Low-redshift observations, as well as theoretical models, imply that the integrated X-ray luminosity to star formation rate of HMXBs (L_X/SFR) should increase in metal-poor environments, typical of early galaxies. Here, we study the impact of the metallicity (Z) dependence of L_X/SFR during the EoH. For our fiducial models, galaxies with star formation rates of order 10^(−3)–10^(−1)M_⊙ yr^(−1) and metallicities of order 10^(−3) –10^(−2) Z_⊙ are the dominant contributors to the X-ray background (XRB) during this period. Different L_X/SFR–Z relations result in factors of ∼ 3 differences in these ranges, as well as in the mean IGM temperature and the large-scale 21-cm power, at a given redshift. We compute mock 21-cm observations adopting as a baseline a 1000 h integration with the upcoming Square Kilometer Array (SKA) for two different L_X/SFR–Z relations. We perform inference on these mock observations using the common simplification of a constant L_X/SFR, finding that constant L_X/SFR models can recover the IGM evolution of the more complicated L_X/SFR–Z simulations only during the EoH. At z < 10, where the typical galaxies are more polluted, constant L_X/SFR models overpredict the XRB and its relative contribution to the early stages of the reionization.

galaxies: high-redshift↗
NASA NTRS1978

On the construction and application of implicit factored schemes for conservation laws

Efficient, noniterative, implicit finite difference algorithms are systematically developed for nonlinear conservation laws including purely hyperbolic systems and mixed hyperbolic parabolic systems. Utilization of a rational fraction or Pade time differencing formulas, yields a direct and natural derivation of an implicit scheme in a delta form. Attention is given to advantages of the delta formation and to various properties of one- and two-dimensional algorithms.

Warming, R. F.↗
DOE OSTI2023

Compression of tokamak boundary plasma simulation data using a maximum volume algorithm for matrix skeleton decomposition

This report demonstrates satisfactory data compression of SOLPS-ITER simulation output ranging from 2D fields, 1D profiles, and 0D scalar variables with a novel matrix decomposition approach. The singular value decomposition (SVD) scales poorly for large matrix sizes and is unsuited to the application on high dimensional data common to fusion plasma physics simulation. In this work, we employ the columns-submatrix-rows (CUR) matrix factorization technique in order to compute a low-rank approximation up to two orders of magnitude faster than the SVD, but within a nominal L2-norm relative error of ε = 10 –2 . In addition, the CUR approach maintains the original format of the data, in its extracted columns and rows, allowing for interpretable data storage at the original resolution of the simulation. We utilize an iterative algorithm to compute the CUR decomposition of simulation output by maximizing the volume, or linearly independent information content, of a low-rank submatrix contained within the data. Experiments over $\textit{n} × \textit{n}$ randomized test matrices with embedded rank-deficient features show that this maximum volume implementation of CUR matrix approximation has reduced asymptotic computational complexity on the order of n compared to the SVD, which scales approximately as $n^3$. These results show that the CUR technique can be used to effectively select time step snapshots (columns) of over 140 SOLPS-ITER output variables and the associated discretized coordinate timeseries (rows) allowing for reconstruction of the complete simulation dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Oxophilicity Drives Oxygen Transfer at a Palladium–Silver Interface for Increased CO Oxidation Activity

A single-layer AgO x phase grown on Ag(111) efficiently transfers oxygen to Pd domains at room temperature, rendering the Pd-decorated surface highly reactive toward CO oxidation. Here, oxygen transfer from AgO x to Pd and the surface reactivity toward CO were investigated as a function of the Pd coverage using X-ray photoelectron spectroscopy, surface infrared spectroscopy of adsorbed CO, temperature-programmed reaction spectroscopy, and density functional theory (DFT) calculations. Our results show that all of the oxygen from the AgO x layer (~0.375 monolayer) migrates to the surface of Pd during formation of a nearly complete Pd bilayer at 300 K and that the oxygen coverages generated on Pd increase as the Pd cluster size decreases, reaching values that exceed the oxygen concentration in the AgO x layer by as much as a factor of 2. Experimental measurements and DFT calculations show that preferential binding of oxygen on the edges of the Pd clusters enhances the oxygen coverage on Pd clusters of decreasing size and produces a heterogeneous spatial distribution of oxygen. CO adsorbs in high coverages at 100 K by binding on both the terraces and O-rich edges of the Pd clusters. During subsequent heating, oxidation of the adsorbed CO consumes nearly all of the oxygen that transferred from AgO x to the Pd domains; in contrast, the pure AgO x layer exhibits limited reactivity toward CO adsorbed at 100 K. These results demonstrate that differences in oxophilicity drive facile oxygen transfer from Ag to the edges of Pd nanoclusters and thereby give rise to an efficient pathway for CO oxidation on bimetallic PdAg surfaces. The cooperation between the Pd and Ag domains results in near-interfacial chemistry that may be broadly important in catalysis by bimetallic alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Experiment of Sea Breeze Convection, Aerosols, Precipitation, and Environment (ESCAPE) C-band Radar Deployment Field Campaign Report

Convective clouds play a critical role in the Earth’s climate system, acting as sinks of total water in the atmospheric column through precipitation, thereby contributing to the atmospheric energy balance. They serve as a primary mechanism for the transfer of heat, moisture, and momentum through the troposphere, significantly impacting the large-scale atmospheric circulation and local environment, and affecting the probability of subsequent cloud formation (e.g., Hartmann et al. 1984, Su et al. 2014, Sherwood et al. 2014). Convective characteristics including convective core size (reflectivity and updraft), cloud lifetime, precipitation intensity, total precipitation amount, precipitation efficiency, and lightning flash rates can be strongly related to environmental factors (e.g., wind shear, humidity). Since cumulus clouds evolve rapidly, their microphysical and dynamical properties and life cycles are challenging to resolve in models, and even in observations (e.g., Fridlind et al. 2017, Ladino et al. 2017).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Controlling Oxidation of Nb in Oxygen Abundant Environments

Modern particle accelerators depend on Superconducting Radio Frequency (SRF) cavities made from high-purity niobium (Nb) to achieve optimal performance, including high quality factors and strong accelerating gradients. However, when exposed to air, niobium naturally forms a complex oxide layer that can introduce surface imperfections and carbon contamination. This work examines an alternative oxidation strategy under oxygen-rich conditions to better regulate the oxide formation process. The ultimate objective is to improve surface uniformity and cleanliness, thereby reducing defect density and enhancing performance. We used Confocal Microscopy, Scanning Electron Microscopy (SEM), and X-Ray Photoelectron Spectroscopy (XPS) to analyze surface changes. We used standard metrics, like Arithmetic Average Roughness (Ra) and Root Mean Square (Rq). Three oxidation methods were applied: short, extended, and a repeated HF and H₂O₂ oxidation process. Preliminary results show promising reductions in carbon contamination and surface defects.

Romero, Juan [Fermilab]↗
DOE OSTI2021

Genetic Modification of KNAT7 Transcription Factor Expression Enhances Saccharification and Reduces Recalcitrance of Woody Biomass in Poplars

The precise role of KNAT7 transcription factors (TFs) in regulating secondary cell wall (SCW) biosynthesis in poplars has remained unknown, while our understanding of KNAT7 functions in other plants is continuously evolving. To study the impact of genetic modifications of homologous and heterologous KNAT7 gene expression on SCW formation in transgenic poplars, we prepared poplar KNAT7 ( PtKNAT7 ) overexpression ( PtKNAT7 -OE) and antisense suppression ( PtKNAT7 -AS) vector constructs for the generation of transgenic poplar lines via Agrobacterium -mediated transformation. Since the overexpression of homologous genes can sometimes result in co-suppression, we also overexpressed Arabidopsis KNAT7 ( AtKNAT7-OE ) in transgenic poplars. In all these constructs, the expression of KNAT7 transgenes was driven by developing xylem (DX)-specific promoter, DX15. Compared to wild-type (WT) controls, many SCW biosynthesis genes downstream of KNAT7 were highly expressed in poplar PtKNAT7-OE and AtKNAT7-OE lines. Yet, no significant increase in lignin content of woody biomass of these transgenic lines was observed. PtKNAT7-AS lines, however, showed reduced expression of many SCW biosynthesis genes downstream of KNAT7 accompanied by a reduction in lignin content of wood compared to WT controls. Syringyl to Guaiacyl lignin (S/G) ratios were significantly increased in all three KNAT7 knockdown and overexpression transgenic lines than WT controls. These transgenic lines were essentially indistinguishable from WT controls in terms of their growth phenotype. Saccharification efficiency of woody biomass was significantly increased in all transgenic lines than WT controls. Overall, our results demonstrated that developing xylem-specific alteration of KNAT7 expression affects the expression of SCW biosynthesis genes, impacting at least the lignification process and improving saccharification efficiency, hence providing one of the powerful tools for improving bioethanol production from woody biomass of bioenergy crops and trees.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1981

Autothermal reforming of sulfur-free and sulfur-containing hydrocarbon liquids

The mechanisms by which various fuel component hydrocarbons related to both heavy petroleum and coal-derived liquids are converted to hydrogen without forming carbon were investigated. Reactive differences between paraffins and aromatics in autothermal reforming (ATR) were shown to be responsible for the observed fuel-specific carbon formation characteristics. The types of carbon formed in the reformer were identified by SEM and XRD analyses of catalyst samples and carbon deposits. From tests with both light and heavy paraffins and aromatics, it is concluded that high boiling point hydrocarbons and polynuclear aromatics enhance the propensity for carbon formation. The effects of propylene addition on the ATR performance of benzene are described. In ATR tests with mixtures of paraffins and aromatics, synergistic effects on conversion characteristics were identified. Indications that the sulfur content of the fuel may be the limiting factor for efficient ATR operation were found. The conversion and degradation effects of the sulfur additive (thiophene) were examined.

Source record↗
NASA NTRS1986

An analysis on the shapes of ultraviolet extinction curves. I - The 2175 A bump

IUE data are used to investigate the properties of the 2175 A interstellar extinction bump toward 45 reddened Milky Way stars. Using analytic fitting functions, parameters are derived which describe the central position, FWHM, and strength of the bump. The bump position is very stable, with an extreme deviation which is still significantly larger than the measurement uncertainty, indicating true variability. The bump FWHM has a large range of intrinsic values, 0.77/micron to 1.25/micron. The normalized bump strength varies by more than a factor of three. There are no convincing correlations among the three bump parameters, but the width of the bump is strongly correlated with the dust grain environments. Dense quiescent regions yield broad bumps, while diffuse interstellar medium and regions of recent star formation yield narrower bumps. The absence of any correlation between bump width and central position argues strongly against graphite grains in the size range prescribed by the Mathis, Rumpl, and Nordsieck (1977) model as carriers of the bump.

Fitzpatrick, E. L.↗
NASA NTRS1987

Magnetotails at unmagnetized bodies - Comparison of Comet Giacobini-Zinner and Venus

It is found that the near ionopause environs play a crucial role in the tail formation process at both Venus and G-Z and that draping at the two very different sized bodies occurs on ionopause scale sizes. On the other hand, ion densities, downtail mass fluxes, tailward J x B forces, and lobe betas are factors of about 10,000, 50, 100, and 20 times greater in the G-Z tail than in Venus', while bulk flow speeds and ion temperatures are factors of about 15 and 240 times lower. These large quantitative differences in the properties within the two magnetotails are attributable to the significantly greater upstream mass loading of the solar wind by the extended neutral atmosphere at G-Z (comets in general) compared to the gravitationally bound atmosphere of Venus.

Mccomas, D. J.↗
NASA NTRS1987

Wear of iron and nickel in corrosive liquid environments

Friction and wear behavior of Fe and Ni sliding on aluminum oxide in aerated sulfuric acid and hydrochloric acid were investigated. The results show that the concentration of acid is an important factor in controlling the metal loss caused by wear corrosion processes in the acids. At very dilute acid concentration (10 to the -4 N), Fe behaves differently from Ni. Fe develops a soft, friable deposit, while Ni develops no corrosion layer. The formation and removal of the corrosion deposit on Fe resulted in high metal loss and coefficient of friction, as compared to the relatively low metal loss and coefficient of friction observed for Ni. At slightly higher acid concentration (10 to the -3 and 10 to the -2 N), no corrosion products were produced on both Fe and Ni. Wear of Fe and Ni was generally at a minimum. At higher acid concentration (10 to the -1 N and above), loss of Fe and Ni increased as the acid concentration increased. In sulfuric acid the maximum loss of both Fe and Ni was at 7.5 N (30%) concentration, and the metal losses of both Fe and Ni dropped markedly at 15 N (50%) and above. In hydrochloric acid, however, the Fe loss continued to increase with the increase of acid concentration, and the maximum Fe loss occurred in the most concentrated acid (12.1 N, 37%). There were variations in loss with Ni from specimen to specimen examined in hydrochloric acids (10 to the -1 N and above). The coefficient of friction for Ni increased slightly with an increase in acid concentration up to 10 to the -2 N. When corrosion started to dominate in the wear-corrosion process, the coefficient of friction decreased in both sulfuric and hydrochloric acids at 10 to the -1 N and above.

Miyoshi, Kazuhisa↗
NASA NTRS1988

Wear of iron and nickel in corrosive liquid environments

Friction and wear behavior of Fe and Ni sliding on aluminum oxide in aerated sulfuric acid and hydrochloric acid were investigated. The results show that the concentration of acid is an important factor in controlling the metal loss caused by wear corrosion processes in the acids. At very dilute acid concentration (10 to the -4 N), Fe behaves differently from Ni. Fe develops a soft, friable deposit, while Ni develops no corrosion layer. The formation and removal of the corrosion deposit on Fe resulted in high metal loss and coefficient of friction, as compared to the relatively low metal loss and coefficient of friction observed for Ni. At slightly higher acid concentration (10 to the -3 and 10 to the -2 N), no corrosion products were produced on both Fe and Ni. Wear of Fe and Ni was generally at a minimum. At higher acid concentration (10 to the -1 N and above), loss of Fe and Ni increased as the acid concentration increased. In sulfuric acid the maximum loss of both Fe and Ni was at 7.5 N (30 percent) concentration, and the metal losses of both Fe and Ni dropped markedly at 15 N (50 percent) and above. In hydrochloric acid, however, the Fe loss continued to increase with the increase of acid concentration, and the maximum Fe loss occurred in the most concentrated acid (12.1 N, 37 percent). There were variations in loss with Ni from specimen to specimen examined in hydrochloric acids (10 to the -1 N and above). The coefficient of friction for Ni increased slightly with an increase in acid concentration up to 10 to the -2 N. When corrosion started to dominate in the wear-corrosion process, the coefficient of friction decreased in both sulfuric and hydrochloric acids at 10 to the -1 N and above.

Miyoshi, Kazuhisa↗
NASA NTRS1991

Ozone heating in the Martian atmosphere

In addition to establishing that ozone constitutes a nonnegligible but only minor heat source in the Martian atmosphere, it is presently shown that the ozone abundance's hemispherical asymmetry is an improbable factor in the establishment of the polar caps' observed hemispherical asymmetry, since ozone absorbs less than 1 percent of the total solar flux incident on the polar caps. In the remaining hypothesized roles for Martian atmospheric ozone considered, namely those of cloud formation and snowfall, ozone heating remains nonnegligible but appears overstated by previous studies.

Lindner, Bernhard L.↗