Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUORIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Materials Data on TeH14C3S3(N3F2)2 by Materials Project

C3H13TeS3(N3F)2HF2 crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of four hydrogen fluoride hydrogen fluoride molecules and two C3H13TeS3(N3F)2 clusters. In each C3H13TeS3(N3F)2 cluster, there are three inequivalent C+3.33+ sites. In the first C+3.33+ site, C+3.33+ is bonded in a distorted bent 120 degrees geometry to two N3- and one S2- atom. Both C–N bond lengths are 1.33 Å. The C–S bond length is 1.75 Å. In the second C+3.33+ site, C+3.33+ is bonded in a distorted trigonal planar geometry to two N3- and one S2- atom. Both C–N bond lengths are 1.33 Å. The C–S bond length is 1.74 Å. In the third C+3.33+ site, C+3.33+ is bonded in a distorted trigonal planar geometry to two N3- and one S2- atom. There is one shorter (1.30 Å) and one longer (1.34 Å) C–N bond length. The C–S bond length is 1.79 Å. There are six inequivalent N3- sites. In the first N3- site, N3- is bonded in a trigonal planar geometry to one C+3.33+ and two H1+ atoms. Both N–H bond lengths are 1.03 Å. In the second N3- site, N3- is bonded in a trigonal planar geometry to one C+3.33+ and two H1+ atoms. There is one shorter (1.02 Å) and one longer (1.03 Å) N–H bond length. In the third N3- site, N3- is bonded in a trigonal planar geometry to one C+3.33+ and two H1+ atoms. Both N–H bond lengths are 1.03 Å. In the fourth N3- site, N3- is bonded in a trigonal planar geometry to one C+3.33+ and two H1+ atoms. There is one shorter (1.01 Å) and one longer (1.02 Å) N–H bond length. In the fifth N3- site, N3- is bonded in a trigonal planar geometry to one C+3.33+ and two H1+ atoms. There is one shorter (1.02 Å) and one longer (1.03 Å) N–H bond length. In the sixth N3- site, N3- is bonded in a trigonal planar geometry to one C+3.33+ and two H1+ atoms. There is one shorter (1.02 Å) and one longer (1.25 Å) N–H bond length. There are thirteen inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the second H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the third H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the fourth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the fifth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the sixth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the seventh H1+ site, H1+ is bonded in a single-bond geometry to one S2- and one F1- atom. The H–S bond length is 2.04 Å. The H–F bond length is 0.99 Å. In the eighth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the ninth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the tenth H1+ site, H1+ is bonded in a linear geometry to one N3- and one F1- atom. The H–F bond length is 1.17 Å. In the eleventh H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the twelfth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the thirteenth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. Te4+ is bonded in a distorted rectangular see-saw-like geometry to four S2- atoms. There are a spread of Te–S bond distances ranging from 2.45–3.27 Å. There are three inequivalent S2- sites. In the first S2- site, S2- is bonded in a 4-coordinate geometry to one C+3.33+, one H1+, and two equivalent Te4+ atoms. In the second S2- site, S2- is bonded in a water-like geometry to one C+3.33+ and one Te4+ atom. In the third S2- site, S2- is bonded in a distorted T-shaped geometry to one C+3.33+, one Te4+, and one F1- atom. The S–F bond length is 2.77 Å. There are two inequivalent F1- sites. In the first F1- site, F1- is bonded in a single-bond geometry to one H1+ atom. In the second F1- site, F1- is bonded in a single-bond geometry to one H1+ and one S2- atom.

36 MATERIALS SCIENCE↗

Materials Data on CuH12N2(OF2)2 by Materials Project

(CuNH8O2F3)2NH3NH4HF2 crystallizes in the monoclinic P2_1/c space group. The structure is three-dimensional and consists of four ammonia molecules, four ammonium molecules, four hydrogen fluoride hydrogen fluoride molecules, and one CuNH8O2F3 framework. In the CuNH8O2F3 framework, there are two inequivalent Cu2+ sites. In the first Cu2+ site, Cu2+ is bonded in a distorted octahedral geometry to two O2- and four F1- atoms. There is one shorter (1.95 Å) and one longer (1.96 Å) Cu–O bond length. There are a spread of Cu–F bond distances ranging from 2.00–2.63 Å. In the second Cu2+ site, Cu2+ is bonded in a 4-coordinate geometry to two O2- and two F1- atoms. There is one shorter (1.92 Å) and one longer (1.97 Å) Cu–O bond length. There are one shorter (2.03 Å) and one longer (2.13 Å) Cu–F bond lengths. There are two inequivalent N3- sites. In the first N3- site, N3- is bonded in a tetrahedral geometry to four H1+ atoms. There are a spread of N–H bond distances ranging from 1.02–1.06 Å. In the second N3- site, N3- is bonded in a tetrahedral geometry to four H1+ atoms. There are a spread of N–H bond distances ranging from 1.03–1.05 Å. There are sixteen inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a distorted linear geometry to one N3- and one F1- atom. The H–F bond length is 1.56 Å. In the second H1+ site, H1+ is bonded in a linear geometry to one O2- and one F1- atom. The H–O bond length is 1.02 Å. The H–F bond length is 1.53 Å. In the third H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the fourth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the fifth H1+ site, H1+ is bonded in a linear geometry to one O2- and one F1- atom. The H–O bond length is 1.10 Å. The H–F bond length is 1.30 Å. In the sixth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the seventh H1+ site, H1+ is bonded in a single-bond geometry to one N3- and one F1- atom. The H–F bond length is 1.64 Å. In the eighth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the ninth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. In the tenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 1.00 Å. In the eleventh H1+ site, H1+ is bonded in a linear geometry to one O2- and one F1- atom. The H–O bond length is 1.01 Å. The H–F bond length is 1.49 Å. In the twelfth H1+ site, H1+ is bonded in a distorted single-bond geometry to one O2- and one F1- atom. The H–O bond length is 1.00 Å. The H–F bond length is 1.62 Å. In the thirteenth H1+ site, H1+ is bonded in a linear geometry to one O2- and one F1- atom. The H–O bond length is 1.03 Å. The H–F bond length is 1.49 Å. In the fourteenth H1+ site, H1+ is bonded in a distorted single-bond geometry to one O2- and one F1- atom. The H–O bond length is 1.00 Å. The H–F bond length is 1.62 Å. In the fifteenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the sixteenth H1+ site, H1+ is bonded in a single-bond geometry to one N3- atom. There are four inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to one Cu2+ and two H1+ atoms. In the second O2- site, O2- is bonded in a distorted water-like geometry to one Cu2+ and two H1+ atoms. In the third O2- site, O2- is bonded in a distorted trigonal planar geometry to one Cu2+ and two H1+ atoms. In the fourth O2- site, O2- is bonded in a distorted trigonal non-coplanar geometry to one Cu2+ and two H1+ atoms. There are six inequivalent F1- sites. In the first F1- site, F1- is bonded in a distorted bent 120 degrees geometry to one Cu2+ and one H1+ atom. In the second F1- site, F1- is bonded in a single-bond geometry to one Cu2+ and one H1+ atom. In the third F1- site, F1- is bonded in a 1-coordinate geometry to one Cu2+ and one H1+ atom. In the fourth F1- site, F1- is bonded in a distorted bent 120 degrees geometry to one Cu2+ and one H1+ atom. In the fifth F1- site, F1- is bonded in a 3-coordinate geometry to one Cu2+ and two H1+ atoms. In the sixth F1- site, F1- is bonded in a distorted trigonal planar geometry to one Cu2+ and two H1+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on H3F2 by Materials Project

H2(HF)4 crystallizes in the triclinic P1 space group. The structure is zero-dimensional and consists of one hydrogen molecule and two hydrogen fluoride hydrogen fluoride molecules.

36 MATERIALS SCIENCE↗

Materials Data on HXe2F15 by Materials Project

(XeF6)4(HF2)2F2 crystallizes in the orthorhombic Pna2_1 space group. The structure is zero-dimensional and consists of four hydrofluoric acid molecules, four hydrogen fluoride hydrogen fluoride molecules, and four XeF6 clusters. In each XeF6 cluster, there are two inequivalent Xe sites. In the first Xe site, Xe is bonded in a 7-coordinate geometry to seven F atoms. There are a spread of Xe–F bond distances ranging from 1.98–2.51 Å. In the second Xe site, Xe is bonded in a 7-coordinate geometry to seven F atoms. There are a spread of Xe–F bond distances ranging from 1.98–2.48 Å. There are twelve inequivalent F sites. In the first F site, F is bonded in a single-bond geometry to one Xe atom. In the second F site, F is bonded in a single-bond geometry to one Xe atom. In the third F site, F is bonded in a single-bond geometry to one Xe atom. In the fourth F site, F is bonded in a single-bond geometry to one Xe atom. In the fifth F site, F is bonded in a single-bond geometry to one Xe atom. In the sixth F site, F is bonded in a single-bond geometry to one Xe atom. In the seventh F site, F is bonded in a single-bond geometry to one Xe atom. In the eighth F site, F is bonded in a single-bond geometry to one Xe atom. In the ninth F site, F is bonded in a bent 120 degrees geometry to two Xe atoms. In the tenth F site, F is bonded in a single-bond geometry to one Xe atom. In the eleventh F site, F is bonded in a bent 120 degrees geometry to two Xe atoms. In the twelfth F site, F is bonded in a single-bond geometry to one Xe atom.

36 MATERIALS SCIENCE↗

Materials Data on Sb2F13 by Materials Project

(SbF5)4(F2)3 crystallizes in the triclinic P-1 space group. The structure is zero-dimensional and consists of one hydrofluoric acid molecule, one hydrogen fluoride hydrogen fluoride molecule, and two SbF5 clusters. In each SbF5 cluster, Sb is bonded in a 4-coordinate geometry to five F atoms. There are a spread of Sb–F bond distances ranging from 1.55–2.59 Å. There are five inequivalent F sites. In the first F site, F is bonded in a single-bond geometry to one Sb atom. In the second F site, F is bonded in a single-bond geometry to one Sb atom. In the third F site, F is bonded in a single-bond geometry to one Sb atom. In the fourth F site, F is bonded in a single-bond geometry to one Sb atom. In the fifth F site, F is bonded in a single-bond geometry to one Sb atom.

36 MATERIALS SCIENCE↗

Materials Data on H25C8IN2(OF2)2 by Materials Project

(N(CH3)4)2HF2I(OF)2 is Silicon tetrafluoride-derived structured and crystallizes in the monoclinic C2/m space group. The structure is zero-dimensional and consists of four hydrogen fluoride hydrogen fluoride molecules, eight tetramethylammonium molecules, and four I(OF)2 clusters. In each I(OF)2 cluster, O2- is bonded in a single-bond geometry to one I1- atom. The O–I bond length is 1.80 Å. I1- is bonded in a distorted rectangular see-saw-like geometry to two equivalent O2- and two F1- atoms. Both I–F bond lengths are 2.08 Å. There are two inequivalent F1- sites. In the first F1- site, F1- is bonded in a single-bond geometry to one I1- atom. In the second F1- site, F1- is bonded in a single-bond geometry to one I1- atom.

36 MATERIALS SCIENCE↗

Materials Data on H4NF2 by Materials Project

N2(H2)3(HF2)2 crystallizes in the trigonal R-3m space group. The structure is zero-dimensional and consists of six hydrogen fluoride hydrogen fluoride molecules, six molecular hydrogen molecules, and three nitrogen molecules.

36 MATERIALS SCIENCE↗

Materials Data on Te3(OF6)2 by Materials Project

Te3(OF4)2(F2)2 crystallizes in the tetragonal I4_1/a space group. The structure is zero-dimensional and consists of sixteen hydrogen fluoride hydrogen fluoride molecules and eight Te3(OF4)2 clusters. In each Te3(OF4)2 cluster, there are two inequivalent Te+5.33+ sites. In the first Te+5.33+ site, Te+5.33+ is bonded in a trigonal pyramidal geometry to one O2- and three F1- atoms. The Te–O bond length is 2.01 Å. There are a spread of Te–F bond distances ranging from 1.86–1.95 Å. In the second Te+5.33+ site, Te+5.33+ is bonded in a square co-planar geometry to two equivalent O2- and two equivalent F1- atoms. Both Te–O bond lengths are 2.00 Å. Both Te–F bond lengths are 1.98 Å. O2- is bonded in a distorted bent 150 degrees geometry to two Te+5.33+ atoms. There are four inequivalent F1- sites. In the first F1- site, F1- is bonded in a single-bond geometry to one Te+5.33+ atom. In the second F1- site, F1- is bonded in a single-bond geometry to one Te+5.33+ atom. In the third F1- site, F1- is bonded in a single-bond geometry to one Te+5.33+ atom. In the fourth F1- site, F1- is bonded in a single-bond geometry to one Te+5.33+ atom.

36 MATERIALS SCIENCE↗

Materials Data on Sb2HF13 by Materials Project

Sb2F11HF2 is Tungsten Carbide structured and crystallizes in the triclinic P-1 space group. The structure is zero-dimensional and consists of one hydrogen fluoride hydrogen fluoride molecule and one Sb2F11 cluster. In the Sb2F11 cluster, Sb is bonded to six F atoms to form corner-sharing SbF6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are a spread of Sb–F bond distances ranging from 1.89–2.08 Å. There are six inequivalent F sites. In the first F site, F is bonded in a single-bond geometry to one Sb atom. In the second F site, F is bonded in a single-bond geometry to one Sb atom. In the third F site, F is bonded in a single-bond geometry to one Sb atom. In the fourth F site, F is bonded in a single-bond geometry to one Sb atom. In the fifth F site, F is bonded in a single-bond geometry to one Sb atom. In the sixth F site, F is bonded in a linear geometry to two equivalent Sb atoms.

36 MATERIALS SCIENCE↗

HYDROFLUORIC ACID SCRUBBER SYSTEMS

Each year over a million gallons of water are used to scrub hydrogen fluoride (HP) vapors from waste off-gas streams. Use of other potential scrubber solutions such as potassium hydroxide (KOH), aluminum nitrate nonahydrate (ANN), and monobasic aluminum nitrate (monoban) would result in significant volume reductions. A laboratory study was initiated to (1) demonstrate the effectiveness of these scrubber solutions to sorb HF, (2) determine if unexpected reactions occurred at flowsheet conditions, and (3) determine the consequences of deviation from flowsheet conditions. Caustic or aluminum scrubber solutions remove hydrogen fluoride from off-gas streams. Solids which appear with aluminum could be avoided by heating the scrubber solution.

99 GENERAL AND MISCELLANEOUS↗

Membrane Purification Cell for Aluminum Recycling

Recycling mixed aluminum scrap usually requires adding primary aluminum to the scrap stream as a diluent to reduce the concentration of non-aluminum constituents used in aluminum alloys. Since primary aluminum production requires approximately 10 times more energy than melting scrap, the bulk of the energy and carbon dioxide emissions for recycling are associated with using primary aluminum as a diluent. Eliminating the need for using primary aluminum as a diluent would dramatically reduce energy requirements, decrease carbon dioxide emissions, and increase scrap utilization in recycling. Electrorefining can be used to extract pure aluminum from mixed scrap. Some example applications include producing primary grade aluminum from specific scrap streams such as consumer packaging and mixed alloy saw chips, and recycling multi-alloy products such as brazing sheet. Electrorefining can also be used to extract valuable alloying elements such as Li from Al-Li mixed scrap. This project was aimed at developing an electrorefining process for purifying aluminum to reduce energy consumption and emissions by 75% compared to conventional technology. An electrolytic molten aluminum purification process, utilizing a horizontal membrane cell anode, was designed, constructed, operated and validated. The electrorefining technology could also be used to produce ultra-high purity aluminum for advanced materials applications. The technical objectives for this project were to: - Validate the membrane cell concept with a lab-scale electrorefining cell; - Determine if previously identified voltage increase issue for chloride electrolytes holds for a fluoride-based electrolyte system; - Assess the probability that voltage change issues can be solved; and - Conduct a market and economic analysis to assess commercial feasibility. The process was tested using three different binary alloy compositions (Al-2.0 wt.% Cu, Al-4.7 wt.% Si, Al-0.6 wt.% Fe) and a brazing sheet scrap composition (Al-2.8 wt.% Si-0.7 wt.% Fe-0.8 wt.% Mn),. Purification factors (defined as the initial impurity concentration divided by the final impurity concentration) of greater than 20 were achieved for silicon, iron, copper, and manganese. Cell performance was measured using its current and voltage characteristics and composition analysis of the anode, cathode, and electrolytes. The various cells were autopsied as part of the study. Three electrolyte systems tested were: LiCl-10 wt. % AlCl3, LiCl-10 wt. % AlCl3-5 wt.% AlF3 and LiF-10 wt.% AlF3. An extended four-day run with the LiCl-10 wt.% AlCl3-5 wt.% AlF3 electrolyte system was stable for the entire duration of the experiment, running at energy requirements about one third of the Hoopes and the conventional Hall-Heroult process. Three different anode membranes were investigated with respect to their purification performance and survivability: a woven graphite cloth with 0.05 cm nominal thickness & > 90 % porosity, a drilled rigid membrane with nominal porosity of 33%, and another drilled rigid graphite membrane with increased thickness. The latter rigid drilled graphite was selected as the most promising membrane design. The economic viability of the membrane cell to purify scrap is sensitive to primary & scrap aluminum prices, and the cost of electricity. In particular, it is sensitive to the differential between scrap and primary aluminum price which is highly variable and dependent on the scrap source. In order to be economically viable, any scrap post-processing technology in the U.S. market must have a total operating cost well below the scrap price differential of $0.20-$0.40 per lb to the London Metal Exchange (LME), a margin of 65%-85% of the LME price. The cost to operate the membrane cell is estimated to be < $0.24/lb of purified aluminum. The energy cost is estimated to be $0.05/lb of purified aluminum with the remaining costs being repair and maintenance, electrolyte, labor, taxes and depreciation. The bench-scale work on membrane purification cell process has demonstrated technological advantages and substantial energy and investment savings against other electrolytic processes. However, in order to realize commercial reality, the following items need to be fully investigated: 1. Further evaluation of a pure fluoride electrolyte. 2. Investigate alternative non conductive, more mechanically robust and chemically inert membrane candidates. 3. Optimized membrane cell design to understand contribution of fluid flow patterns and the mass transfer conditions. 4. Improve current efficiency and total metallic aluminum recovery from the cell. All Tasks and Milestones were completed successfully.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DISSOLUTION OF PLUTONIUM METAL IN 8-10 M NITRIC ACID

The H-Canyon facility will be used to dissolve Pu metal for subsequent purification and conversion to plutonium dioxide (PuO 2 ) using Phase II of HB-Line. To support the new mission, the development of a Pu metal dissolution flowsheet which utilizes concentrated (8-10 M) nitric acid (HNO 3 ) solutions containing potassium fluoride (KF) is required. Dissolution of Pu metal in concentrated HNO 3 is desired to eliminate the need to adjust the solution acidity prior to purification by anion exchange. The preferred flowsheet would use 8-10 M HNO 3 , 0.015-0.07 M KF, and 0.5-1.0 g/L Gd to dissolve the Pu up to 6.75 g/L. An alternate flowsheet would use 8-10 M HNO 3 , 0.05-0.2 M KF, and 1-2 g/L B to dissolve the Pu. The targeted average Pu metal dissolution rate is 20 mg/min-cm 2 , which is sufficient to dissolve a “standard” 2250-g Pu metal button in 24 h. Plutonium metal dissolution rate measurements showed that if Gd is used as the nuclear poison, the optimum dissolution conditions occur in 10 M HNO 3 , 0.04-0.05 M KF, and 0.5-1.0 g/L Gd at 112 to 116 °C (boiling). These conditions will result in an estimated Pu metal dissolution rate of ~11-15 mg/min-cm 2 and will result in dissolution times of 36-48 h for standard buttons. The recommended minimum and maximum KF concentrations are 0.03 M and 0.07 M, respectively. The data also indicate that lower KF concentrations would yield dissolution rates for B comparable to those observed with Gd at the same HNO 3 concentration and dissolution temperature. To confirm that the optimal conditions identified by the dissolution rate measurements can be used to dissolve Pu metal up to 6.75 g/L in the presence of representative concentrations of Fe and Gd or B, a series of experiments was performed to demonstrate the flowsheets. In three of the five experiments, the offgas generation rate during the dissolution was measured and samples were analyzed for hydrogen gas (H 2 ). The use of 10 M HNO 3 containing 0.03-0.05 M KF, 0.5-1.0 g/L Gd, and 1.9 g/L Fe resulted in complete dissolution of the metal in 2.0-3.5 h. When B was used as the neutron poison, 10 M HNO 3 solutions containing 0.05-0.1 M KF, 1.9 g/L Fe, and 1 g/L B resulted in complete dissolution of the metal in 0.75-2.0 h. Dissolution rates estimated using data from the flowsheets demonstrations agreed reasonably well with the measured rates; although, a discrepancy was observed in the Gd system. The presence of 1 g/L Gd or B in the dissolving solution had about the same effect on the dissolution rate. The predominant Pu valence in the dissolving solution was Pu(IV). The concentration of Pu(VI) was evaluated by UV-visible spectroscopy and was estimated to be significantly less than 1 wt %. The offgas generation rates and H 2 concentrations measured in the offgas from experiments performed using 10 M HNO 3 containing 0.05 M KF, 1.9 g/L Fe and either 1 g/L Gd or B were approximately the same. These data support the conclusion that the presence of either 1 g/L Gd or B had the same general effect on the dissolution rate. The calculated offgas generation during the dissolutions was 0.6 mol offgas/mol of Pu. The H 2 concentration measured in the offgas from the dissolution using Gd as the neutron poison was approximately 0.5 vol %. In the B system, the H 2 ranged from nominally 0.8 to 1 vol % which is about the same as measured in the Gd system within the uncertainty of the analysis. The offgas generation rate for the dissolution performed using 10 M HNO 3 containing 0.03 M KF, 0.5 g/L Gd, and 1.9 g/L Fe was approximately a factor of two less than produced in the other dissolutions; however, the concentration of H 2 measured in the offgas was higher. The adjusted concentration ranged from 2.7 to 8.8 vol % as the dissolution proceeded. Higher concentrations of H 2 occur when the Pu dissolution proceeds by a metal/acid reaction rather than nitrate oxidation. The higher H 2 concentration could be attributed to the reduced activity of the fluoride due to complexation with Pu as the dissolution progressed. Dissolution of Pu metal at 20 °C in 10 M HNO 3 containing 0.05 M KF showed that the Pu metal dissolves slowly without any visible gas generation. As the Pu metal dissolves, it forms a more-dense Pu-bearing solution which sank to the bottom of the dissolution vessel. The dissolved Pu did not form a boundary layer around the sample and failed to distribute homogeneously due to minimal (thermally-induced) mixing. This indicates that in the H-Canyon dissolver insert, the Pu will diffuse out of the insert into the bulk dissolver solution where it will disperse. At 35 °C, the Pu metal dissolved without visible gas generation. However, due to thermal currents caused by maintaining the solution at 35 °C, the dissolved Pu distributed evenly throughout the dissolver solution. It did not form a boundary layer around the sample.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Low-Cost Production of Lithium-Ion Separator Membranes w/ Improved Safety

The purpose of this Cooperative Research and Development Agreement (CRADA) between Oak Ridge National Laboratory (ORNL) and Porous Power Technologies, LLC (PPT) was to validate the performance, durability, and safety of a new type of reinforced, composite lithium ion battery separator produced as either a free-standing product or by a method of direct coating after electrode fabrication. ORNL’s primary roles were to develop novel separator thermophysical and mechanical property characterization methods and assist with fundamental understanding of SYMMETRIX® HPX and HPX-F product line chemical makeup and microstructure. PPT’s primary roles were to implement the understanding gained from the ORNL developed characterization methods into a refined product line featuring nonwoven-reinforced, ceramic-filled composite HPX-F separators for the lithium ion battery industry and quantify long-term cell performance improvements associated with HPX-F separators. Over the course of this CRADA, the product line of PPT was expanded from a pure polyvinylidene fluoride (PVDF) HP and polyester nonwoven-reinforced HPX separator platform to one that includes a variety of ceramic-filled HPX-F separators. In addition, the laminating and direct coating technologies for HPX and HPX-F separators are now more developed and moving towards commercial licensing. PPT’s SYMMETRIX® production process will revolutionize the production of lithium ion batteries by eliminating one of the most expensive components (the free-standing separator membrane) while improving performance and safety. The performance and safety improvements are due primarily to replacement of the conventional polyethylene/polypropylene (PE/PP) separator material with polyvinylidene fluoride (PVDF), and to ceramic materials added to the PVDF to form a short-resistant, thermally-stable composite structure. Ultimately, lithium ion battery manufacturers will be able to produce PPT separators in-house through the laminating or direct coating methods such as those based on the SYMMETRIX® product line, giving them higher performance cells at a fraction of the cost required to purchase separators from existing vendors. Direct coating of separators onto electrodes eliminates the cost of a downstream thermal lamination step and requires little or no change to existing equipment. It is a clear path for lithium ion battery manufacturers to reach the <$1/m2 separator price target set by the U.S. Advanced Battery Consortium (USABC). The technology enabled by this project will have a substantial impact on energy efficiency required to produce cells and is anticipated to save up to $1B annually by 2014 in reduced manufacturing costs. In addition, it will contribute significantly to production energy savings associated with transporting free-standing polyolefin (PE/PP) separators from the vendor to the cell manufacturer locations. SYMMETRIX® separators have shown increased cell capacity, improved thermal stability, and longer cycle life over their PE/PP counterparts and have been repeatedly demonstrated to improve nearly all aspects of lithium ion battery performance Prior to the start of this CRADA, widespread adoption has been limited by three factors: 1) difficulty in handling the material on high-speed processing equipment due to lower tensile strength than oriented PE/PP materials; 2) cost concerns associated with the higher expense of PVDF as a raw material; and 3) questions regarding short resistance and durability. The first factor was addressed through thorough mechanical (ultimate tensile strength and dynamic mechanical analysis, etc.) property characterization of HPX and HPX-F materials against the commercial polyolefin baselines. The second factor was address by shifting the focus of PPT’s product line towards the HPX-F materials with low-PVDF (high ceramic filler) content to reduce overall separator cost. Concerns associated with the third factor were alleviated by evaluating the internal shorting resistance of the separators using a custom developed ORNL measurement method and obtaining long-term cycling data of the new HPX-F separator formulations. A materials emphasis was placed on polyester fiber mats for the nonwoven reinforcement (to boost overall separator tensile strength) and proprietary metal oxides for the HPX-F fillers (to improve thermomechanical properties of the separator and make it more resistant to overcharge and internal shorting).

batteries↗

AHTR Refueling Systems and Process Description

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt–cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy’s Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published, and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Integral and Separate Effects Tests for Thermal Hydraulics Code Validation for Liquid-Salt Cooled Nuclear Reactors

The objective of the 3-year project was to collect integral effects test (IET) data to validate the RELAP5-3D code and other thermal hydraulics codes for use in predicting the transient thermal hydraulics response of liquid salt cooled reactor systems, including integral transient response for forced and natural circulation operation. The reference system for the project is a modular, 900-MWth Pebble Bed Advanced High Temperature Reactor (PB-AHTR), a specific type of Fluoride salt-cooled High temperature Reactor (FHR). Two experimental facilities were developed for thermal-hydraulic integral effects tests (IETs) and separate effects tests (SETs). The facilities use simulant fluids for the liquid fluoride salts, with very little distortion to the heat transfer and fluid dynamics behavior. The CIET Test Bay facility was designed, built, and operated. IET data for steady state and transient natural circulation was collected. SET data for convective heat transfer in pebble beds and straight channel geometries was collected. The facility continues to be operational and will be used for future experiments, and for component development. The CIET 2 facility is larger in scope, and its construction and operation has a longer timeline than the duration of this grant. The design for the CIET 2 facility has drawn heavily on the experience and data collected on the CIET Test Bay, and it was completed in parallel with operation of the CIET Test Bay. CIET 2 will demonstrate start-up and shut-down transients and control logic, in addition to LOFC and LOHS transients, and buoyant shut down rod operation during transients. Design of the CIET 2 Facility is complete, and engineering drawings have been submitted to an external vendor for outsourced quality controlled construction. CIET 2 construction and operation continue under another NEUP grant. IET data from both CIET facilities is to be used for validation of system codes used for FHR modeling, such as RELAP5-3D. A set of numerical models were developed in parallel to the experimental work. RELAP5-3D models were developed for the salt-cooled PB-AHTR, and for the simulat fluid CIET natural circulation experimental loop. These models are to be validated by the data collected from CIET. COMSOL finite element models were used to predict the temperature and fluid flow distribution in the annular pebble bed core; they were instrumental for design of SETs, and they can be used for code-to-code comparisons with RELAP5-3D. A number of other small SETs, and numerical models were constructed, as needed, in support of this work. The experiments were designed, constructed and performed to meet CAES quality assurance requirements for test planning, implementation, and documentation; equipment calibration and documentation, procurement document control; training and personnel qualification; analysis/modeling software verification and validation; data acquisition/collection and analysis; and peer review.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Dissolution of Zirconium-Bonded, Monolithic, Uranium-Molybdenum Fuel for Uranium Recovery

This report presents results from a process development study of dissolution scenarios that would facilitate the recovery of uranium from both irradiated (spent) and unirradiated (scrap) U-10Mo fuel using a tributyl-phosphate-based solvent extraction process. A specific focus of this study is to assess how metals added as diffusion/bonding barriers will influence the chemistry of the fuel dissolution process. Of particular interest are fuels containing zirconium or niobium as barrier materials, because these fuels may contain an intermetallic uranium-zirconium or uranium-niobium phase (formed during fabrication and enhanced during irradiation) that could react with explosive violence during oxidative dissolution. The first part of this report will evaluate the explosive potential of this intermetallic phase and discuss means to inhibit explosive reactions in the dissolver when it is present (e.g., by the addition of fluoride to the dissolver solution). The second part of the report will discuss dissolution scenarios for both spent and scrap U-10Mo fuel and will discuss the possibility of dissolver corrosion in the fluoride bearing dissolver solutions.

Jerden, James↗

Annual Report FY2013-- A Kinematically Complete, Interdisciplinary, and Co-Institutional Measurement of the 19F(α,n) Cross-section for Nuclear Safeguards Science

The goal of this proposal is to enable neutron detection for precision Non-Destructive Assays (NDAs) of actinide-fluoride samples. Neutrons are continuously generated from a UFx matrix in a container or sample as a result of the interaction of alpha particles from uranium-decay α particles with fluorine nuclei in the matrix. Neutrons from 19F(α,n)22Na were once considered a poorly characterized background for assays of UFx samples via 238U spontaneous fission neutron detection [SMI2010B]. However, the yield of decay-α-driven neutrons is critical for 234,235U LEU and HEU assays, as it can used to determine both the total amount of uranium and the enrichment [BER2010]. This approach can be extremely valuable in a variety of safeguard applications, such as cylinder monitoring in underground uranium storage facilities, nuclear criticality safety studies, nuclear materials accounting, and other nonproliferation applications. The success of neutron-based assays critically depends on an accurate knowledge of the cross section of the (α,n) reaction that generates the neutrons. The 40% uncertainty in the 19F(α,n)22Na cross section currently limits the precision of such assays, and has been identified as a key factor in preventing accurate enrichment determinations [CRO2003]. The need for higher quality cross section data for (α,n) reactions has been a recurring conclusion in reviews of the nuclear data needs to support safeguards. The overarching goal of this project is to enable neutron detection to be used for precision Non- Destructive Assays (NDAs) of actinide-fluoride samples. This will significantly advance safeguards verification at existing declared facilities, nuclear materials accounting, process control, nuclear criticality safety monitoring, and a variety of other nonproliferation applications. To reach this goal, Idaho National Laboratory (INL), in partnership with Oak Ridge National Laboratory (ORNL), Rutgers University (RU), and the University of Notre Dame (UND), will focus on three specific items: (1) making a precision (better than 10 %) determination of the absolute cross section of the 19F(α,n)22Na reaction as a function of energy; (2) determining the spectrum of neutrons and γ-rays emitted from 19F(α,n)22Na over an energy range pertinent to NDA; and (3) performing simulations with this new cross section to extract the neutron yield (neutrons/gram/second) and resulting neutron- and gamma ray-spectra when α particles interact with fluorine nuclei in actinide samples, to aid in the design and reduce uncertainty of future NDA measurements and simulations.

VANDLE, HPGe gamma-ray detector, liquid neutron de↗

Molten Salt Reactor Salt Processing – Technology Status

This report presents a summary of 752 citations related to molten salt reactor development at Oak Ridge National Laboratory (ORNL). This effort was initiated with a focused purpose of locating technical information related to the chemical processing of fluoride salts to support the Th-232/U-233 fuel-cycle molten-salt breeder reactor. However, it soon became apparent that technical information on chemical processing was spread throughout numerous reports spanning decades of time. Therefore, the search effort was broadened to include any information deemed relevant to MSR development at ORNL. In addition, this report provides an overview of the engineering requirements of a chemical processing plant to support the Th-232/U-233 fuel-cycle molten salt breeder reactor (MSBR). This includes descriptions of the unit operations and flowsheets development at ORNL. The transition from the two-fluid MSBR to the single-fluid MSBR was largely due to the development of new separations technologies for the management of uranium, protactinium, and fission products in fluoride molten salts. The development and refinement of chemical processing plant flowsheets continued throughout the entirety of the MSBR program at ORNL. A great deal of experimental and theoretical work was performed in support of the unit operations and flowsheets described here.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗