Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EUTECTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Hydrogen and helium recycling from a JxB -force convected liquid metal Ga 67 In 20.5 Sn 12.5 under steady state plasma bombardment

A series of first-of-a-kind laboratory-scale experiments on the JxB-force convected liquid metal divertor concept have been carried out in the temperature range from room temperature to ~200 °C, employing a eutectic alloy: Ga 67 In 20.5 Sn 12.5 , the melting point of which is 10.5 °C. The electrical current conducted through the alloy is set at about 70A and the magnetic field is set at about 700 G. Finally, it has reproducibly been observed that hydrogen as well as helium particle recycling is noticeably reduced under steady state plasma bombardment when the liquid is convected by the JxB force.

08 HYDROGEN↗

Tritium permeability measurement in hydrogen-tritium system

Fusion power promises to provide electricity generation with outstanding safety and environmental performance. Safety plays a crucial role in fusion material selection since tritium behavior in materials determines two key safety evaluation source terms: in-vessel inventory source term and ex-vessel release term, which are used in reactor safety assessments for licensing fusion facilities. Tritium permeation through materials at elevated temperature during long pulse operation expected in a burning plasma environment will become a major safety issue and development of tritium permeation barrier materials is required to minimize ex-vessel release to the environment [1]. Extensive work on hydrogen and deuterium behavior in fusion materials has been conducted, but very little database is available for tritium, the radioactive fuel for future reactors, due to the cost and difficulty associated with handling tritium [2]. A majority of the experiments were carried out at high hydrogen/deuterium partial pressure (> 100 Pa), but the expected tritium partial pressure in the blanket system is at low tritium partial pressure (< 100 Pa), where the tritium behavior deviates from diffusion-limited to surface-limited permeation. At these pressures the behavior of tritium is suspected to deviate from diffusion-limited to surface-limited permeation or isotope-limited [3]. The use of tritium enables us to investigate hydrogen isotope behavior in low partial pressure range with beta radiation detection. The physics of two-component hydrogen (H+T) permeation through metal in the surface-limited regime and through liquid breeding material are still too poorly understood to confidently design environmentally benign and safe fusion systems. In this paper, we discuss development of tritium permeation system for low tritium partial pressure [4], and discuss the results from two-component hydrogen (H+T) permeation in 20 mm disc samples of pure alpha-iron at H2 partial pressure of 100 Pa, wide T2 partial pressure range from 10-12 to 10 Pa, and sample temperature up to 600 °C to uncover the basic scientific understanding of tritium permeation behavior at realistic blanket conditions for DEMO. [1] FESAC report on “Opportunities for Fusion Materials Science and Technology Research Now and During the ITER Era” (2012) DOE/SC-0149 [2] R.A. Causey, R.A. Karnesky, and C. San Marchi, “4.16 Tritium Barriers and Tritium Diffusion in Fusion Reactors”, Comprehensive Nuclear Materials (2012) Chapter 4.16. [3] P. Humrickhouse “Permeation of Tritium and Hydrogen in the Diffusion-Limited and Surface–Limited Regimes”, submitted to Journal of Nuclear Materials. [4] R.J. Pawelko, M. Shimada, K. Katayama, S. Fukada, P.W. Humrickhouse, and T. Terai, “Low tritium partial pressure permeation system for mass transport measurement in lead lithium eutectic”, Fusion Engineering and Design 102 (2016) 8

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Compatibility of SiC with ODS FeCrAl in flowing Pb-Li at 600° - 700°C

To establish the maximum operating temperature for the dual coolant lead lithium (DCLL) blanket concept, thermal convection loop (TCL) experiments were conducted for 1000 h with a peak temperature of 700 °C to determine compatibility with commercial eutectic Pb~17at.%Li. Two TCLs were fabricated from alloy APMT (FeCrAlMo) and the baseline TCL experiment contained only APMT specimens. The second TCL experiment exposed more fusion relevant CVD SiC and ODS Fe-10Cr-6Al specimens in the hot and cold legs. In the second experiment, the mass losses were much larger for the ODS FeCrAl specimens and most of the CVD SiC specimens experienced a mass gain as SiC reacted to form an Fe- and Cr-rich carbide reaction product. Dissolved Fe and Cr reacted with the SiC and removing Fe and Cr from the liquid appeared to increase ODS FeCrAl dissolution. Such a dissimilar material interaction appears consistent with thermodynamic calculations. Significant attack at the top of the hot leg in both experiments suggests that the Pb-Li compatibility of FeCrAl alloys is inadequate at 700 °C in a flowing environment and the maximum PbLi temperature is < 675 °C.

36 MATERIALS SCIENCE↗

Demonstration of RELAP5-3D for transient analysis of a dual coolant lead lithium fusion blanket concept

Our research aims to build a multiphysics framework for transient analysis of the Dual- Coolant Lead-Lithium (DCLL) blanket design of the proposed Fusion Nuclear Science Facility (FNSF) for all Onticipated Operational Occurrences (AOOs) using Reduced Order Models (ROMs). This paper presents an assessment of using RELAP5-3D for transient thermal-hydraulic blanket analysis of the DCLL design. Preliminary validation studies for the RELAP5-3D properties were conducted using a representative vertical flow loop model and a comparison study using experimental data from the thermal convection corrosion loops at ORNL. These studies inspected the thermal hydraulic response of Lead-Lithium Eutectic (PbLi) systems within the RELAP5-3D code; mainly pressure drop and heat transfer, as compared to analytical calculations and experimental data. The Magnetohydrodynamic (MHD) pressure drop effect for liquid metal under the effects of a uniform magnetic field was implemented into our models using an equivalent forms loss coefficient based on the phasic momentum equations. We verified our implementation of MHD pressure drop within RELAP5-3D using a systematic approach consisting of two studies. Models were developed to perform comparison studies based on experimental data from the Argonne Liquid metal EXperiment (ALEX) facility and the Magnetohydrodynamic PbLi Experiment (MaPLE) facility. Using the developed validation basis, we built a simplified DCLL channel model within RELAP5-3D, inspected MHD pressure drop and performed transient temperature analysis. The DCLL channel model used radial heating data from the International Thermonuclear Experimental Reactor (ITER) which was normalized to the FNSF design. Here, a representative startup transient was performed using a relative power curve from the initial ramp up of a long-term power pulse of the Tore Supra reactor. This study demonstrated that RELAP5-3D ROMs are capable of accurate transient analysis of the DCLL blanket. We have since utilized MCNP to develop heating profiles based on the FNSF design and are working toward implementing them into our DCLL model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Prediction of PbLi fluid flow and temperature field in a thermal convection loop for qualification of fusion materials

Two modeling tools, a thermohydraulics code and a computational model in COMSOL Multiphysics, have been developed, tested and then applied to the analysis of fluid flow and heat transfer in a thermal convection loop (TCL). Such a device has recently been used to experimentally evaluate corrosion compatibility of APMT (Fe–21Cr–5Al–3Mo) steel with high-temperature molten eutectic lead-lithium (PbLi) alloy at Oak Ridge National Lab, TN, USA. Here, the 1-D thermohydraulics code allows for rapid calculations of the loop parameters as a function of the applied heat flux. The supplemental COMSOL finite-element computations provide detailed 3-D velocity and temperature field data but are much more time consuming. Both modelling tools demonstrate an excellent agreement in the computed circulation velocity as well as maximum and minimum temperatures. The performed TCL analysis focuses on flow development in the “hot” and “cold” legs, formation of Dean vortices in corner regions, blocking effect of the immersed samples, and radiative and convective cooling effects under the experiment-relevant conditions for Prandtl number Pr = 0.015, Grashof numbers Gr ~10 7 , and Reynolds numbers Re ~10 4 .

36 MATERIALS SCIENCE↗

Galinstan liquid metal breakup and droplet formation in a shock-induced cross-flow

Liquid metal breakup processes are important for understanding a variety of physical phenomena including metal powder formation, thermal spray coatings, fragmentation in explosive detonations and metalized propellant combustion. Since the breakup behaviors of liquid metals are not well studied, we experimentally investigate the roles of higher density and fast elastic surface oxide formation on breakup morphology and droplet characteristics. This work compares the column breakup of water with Galinstan, a room-temperature eutectic liquid metal alloy of gallium, indium and tin. A shock tube is used to generate a step change in convective velocity and back-lit imaging is used to classify morphologies for Weber numbers up to 250. Digital in-line holography (DIH) is then used to quantitatively capture droplet size, velocity and three-dimensional position information. Differences in geometry between canonical spherical drops and the liquid columns utilized in this paper are likely responsible for observations of earlier transition Weber numbers and uni-modal droplet volume distributions. Scaling laws indicate that Galinstan and water share similar droplet size-velocity trends and root-normal volume probability distributions. Furthermore, measurements indicate that Galinstan breakup occurs earlier in non-dimensional time and produces more non-spherical droplets due to fast oxide formation.

36 MATERIALS SCIENCE↗

Thermodynamic properties and phase stability of the Ba-Bi system: A combined computational and experimental study

The thermodynamic properties and phase stability of the Ba-Bi system are investigated computationally and experimentally in the present work. The enthalpies of formation and the finite temperature thermodynamic properties of seven compounds are predicted by first-principles calculations based on density functional theory (DFT), indicating five compounds (BaBi 3 , Ba 11 Bi 10 , Ba 4 Bi 3 , Ba 5 Bi 3 , and Ba 2 Bi) to be stable. Phase relations at 773 K and 858 K with composition x Ba = 0.90 are established by isothermal annealing and powder X-ray diffraction (XRD) to clarify the previously observed phase transition at 796 K. The extremely low chemical activity of Ba in liquid for a wide range of temperatures and compositions indicates very strong short-range ordering in the liquid phase which is modeled in the present work by introducing the Ba 4 Bi 3 and BaBi 3 associates in the liquid phase. Both thermodynamic and phase equilibrium data are then used to evaluate the model parameters in Gibbs energy functions of the five stable compounds and three solution phases of liquid, bcc, and rhombohedral phases by the CALPHAD (CALculation of PHAse Diagram) technique. Here the present work shows that the Ba-Bi system consists of three eutectic reactions, two peritectic reactions, one peritectoid reaction, and two congruent reactions, as well as that the concentrations of associates are very high in the liquid phase with very low concentration of atomic Ba, which provides the fundamental understanding as to why Bi can be used to remove Ba ions from molten salt solutions.

36 MATERIALS SCIENCE↗

Effect of Sb substitution on crystal structure, texture and hard magnetic properties of melt-spun MnBi alloys

Melt-spun Mn 50 Bi 50-x Sb x alloys with x ≤ 5 were prepared at different solidification rates and characterized both in the as-spun state and after annealing. In the as-spun alloys, the Sb substitution leads to the formation of a metastable phase, similar to the binary "quenched high-temperature phase" but without the superstructure of the latter and exhibiting a different – increasing – temperature dependence of coercivity. The new nanocrystalline metastable phase is not only itself characterized by a high room-temperature coercivity (in excess of 20 kOe), but upon annealing it transforms into a high-coercivity (up to 13.5 kOe) "low-temperature" α phase. However, the advantage of obtaining a high coercivity without the otherwise required milling made possible by the Sb substitution is undermined by the absence of a local crystallographic texture in the melt-spun alloys. The best combination of the isotropic hard magnetic properties realized for the Mn 55 Bi 43.5 Sb 1.5 composition is a remanence of 35.5 emu/g and a coercivity of 8.1 kOe. The annealed Sb-free Mn 50 Bi 50 alloys did possess a local crystallographic alignment and, for high solidification rates, a moderate coercivity up to 5.6 kOe; however, they had an inadequate "rectangularity" in the demagnetization curve. The orthorhombic compound known as MnBi 0.9 Sb 0.1 and described earlier as antiferromagnetic was obtained in the annealed ribbons with x ≈ 5. The compound was found to order ferromagnetically between 200 K and ≈250 K and to exhibit a significant coercivity, 14.3 kOe at 50 K. Here, it is suggested that the MnBi 0.9 Sb 0.1 may actually be a Sb-stabilized "new phase" observed earlier as metastable in the Bi–MnBi eutectic alloys.

36 MATERIALS SCIENCE↗

Thermodynamic properties of Gd-Bi alloys determined by emf measurements in LiCl-KCl-GdCl 3 electrolyte

Thermodynamic properties of binary Gd-Bi alloys (mole fraction, x Gd = 0.02–0.35) were determined using electromotive force (emf) measurements in molten LiCl-KCl-GdCl 3 electrolyte in complement with structural, microstructural, and thermal characterization. X-ray diffractometry (XRD) and scanning electron microscopy (SEM) identified the phase constituents of Gd-Bi alloys (x Gd = 0.02–0.35) as Bi matrix and GdBi compound. According to differential scanning calorimetry (DSC) measurements up to 1250 K, a eutectic transition [L = Bi + GdBi] was observed at 543 K but the reported peritectic transition [L + GdBi = GdBi 2 ] was not detected, suggesting the absence of the GdBi 2 compound. Based on structural, microstructural, and thermal characterization of Gd-Bi alloys (x Gd = 0.02–0.35), the GdBi 2 compound was not detected, and its thermodynamic stability is questionable. The emf of Gd-Bi alloy (x Gd = 0.16) at 700–1048 K relative to Gd(s) was measured by electrodepositing pure Gd metal at 25 K increments. Further, the emf values of Gd-Bi alloys were determined via coulometric titration of Gd into liquid Bi using a two-phase [L + GdBi] alloy as a reference electrode at 773–973 K. The solubility of Gd in liquid Bi was also estimated to be 0.50 mol% (773 K), 0.99 mol% (873 K), and 2.21 mol% (973 K) and the excess partial molar Gibbs energy (Δ$\mathrm{\bar{G}^{ex}_{Gd}}$) of liquid Gd-Bi alloys was as low as 65 kJ mol –1 , indicating strong chemical interactions between Gd and Bi.

36 MATERIALS SCIENCE↗

Microstructure-refinement–driven enhanced tensile properties of high-pressure die-cast A380 alloy through friction stir processing

This work employs friction stir processing (FSP), a well-known severe plastic deformation technique, to selectively modify the microstructure of thin-walled, high-pressure die-cast (HPDC) aluminum alloy A380, a major HPDC alloy fabricated in the die casting sector. FSP effectively breaks down Al dendrites and acicular Si particles, creating a homogenized distribution of equiaxed Si particles in the aluminum matrix. After FSP, the refined Si particles (~1.5 µm) are smaller than the eutectic Si particles (3–8 µm) in HPDC condition. In addition, interparticle distance has decreased almost 50% compared to dendritic arm spacing, and FSP has reduced the aspect ratio of Si particles to ~2. Furthermore, FSP eliminates porosity, and breaks down needle-like second-phase Fe-Mn and Cu-rich particles, yielding a refined, homogeneous distribution. The FSP-induced microstructural refinement and porosity reduction improve bulk yield strength and ductility by 23% and 66%. Tensile properties are enhanced beyond those of the die skin of the HPDC plate, and the alloy possesses lower defect density and a highly refined microstructure. This study establishes the viability of FSP as a tool for microstructure modification and mechanical property improvement for HPDC Al alloys for the light-weighting goal of the automotive industries.

36 MATERIALS SCIENCE↗

Microstructure analysis and machinability of additively manufactured A205 aluminum with heat treatments

A205 aluminum is one of the few high-strength aluminum alloys discovered for additive manufacturing (AM). The microstructure and heat treatment effects of AM A205 vary from those of its cast form, indicating possible differences in machinability during post-processing. Here, the objective of this research is to determine these variations of AM A205 and their effects on machinability using the cast condition as the baseline. As built and two heat-treated conditions (solution treatment and age hardening) were applied and compared in terms of their microstructures, micro-hardness, and machinability including vibration, specific cutting energy, chip morphology, and surface finish. The effects of print orientations on machinability were tested as well and found to be insignificant. AM as built had a higher hardness and slightly better machinability than its cast as built cast counterpart due to a smaller grain size (1 µm vs. 15 µm), eutectic θ-Al 2 Cu lattice and a fine, homogeneous TiB 2 distribution. The solution treatment dissolved this θ-Al 2 Cu lattice and increased the grain size (3 µm) which decreased the hardness, increased the ductility seen in the chips, and reduced the overall machinability. The presence of θ’-Al 2 Cu precipitates improved the machinability of aged AM A205. In addition, it was found that A205 exhibited both ductile and brittle behavior depending on the cutting speed, thus producing different machinability. The speed dependency is related to the material condition and heat treatment.

36 MATERIALS SCIENCE↗

A novel method combining additive manufacturing and alloy infiltration for NdFeB bonded magnet fabrication

In this paper, binder jetting additive manufacturing technique is employed to fabricate NdFeB isotropic bonded magnets, followed by an infiltration process with low-melting point eutectic alloys [i.e., Nd 3 Cu 0.25 Co 0.75 (NdCuCo) and Pr 3 Cu 0.25 Co 0.75 (PrCuCo)]. Densification and mechanical strength improvement are achieved for the as-printed porous part. Meanwhile, the intrinsic coercivity H ci is enhanced from 732 to 1345 kA/m and 1233 kA/m after diffusion of NdCuCo and PrCuCo, respectively. This study presents a novel method for fabricating complex-shaped bonded magnets with promising mechanical and magnetic properties.

36 MATERIALS SCIENCE↗

Development of the tailored SiC/SiC composites by the combined fabrication process of ICVI and NITE methods

In order to improve the thermo-mechanical performances of SiC/SiC composite, process improvement and modification by the combination of nano-infiltration and transient eutectic-phase (NITE) method and chemical vapor infiltration (CVI) method were studied. Multilayered PyC/SiC fiber coating and matrix infiltration within fiber-tows were prepared with isothermal/isobaric CVI (ICVI) method and full-densification of SiC matrix was examined with NITE methods using four kinds of processing options. Applied pressure was useful for nearly-full matrix densification due to the promoting infiltration driving force of SiC nano-powder intra-fiber-tows, but simultaneously caused the sever degradation of fibers and interphase with fracture, resulting in lower strength. Increase of additives amount and additional polymer were effective ways for matrix densification by SiC nano-power infiltration intra-fiber bundles without pressure. Thermal conductivity was greatly improved with the decrease of matrix porosity. The tailoring of thermo-mechanical properties might be easily controlled by the SiC matrix porosity without processinduced fibers and interphases degradations.

Shimoda, Kazuya↗

Corrosion of oxide dispersion strengthened iron–chromium steels and tantalum in fluoride salt coolant: An in situ compatibility study for fusion and fusion–fission hybrid reactor concepts

Primary candidate classes of materials for future nuclear power plants, whether they be fission, fusion or hybrids, include oxide dispersion strengthened (ODS) ferritic steels which rely on a dispersion of nano-oxide particles in the matrix for both mechanical strength and swelling resistance, or tantalum alloys which have an inherent neutron-induced swelling resistance and high temperature strength. For high temperature operation, eutectic molten lithium containing fluoride salts are attractive because of their breeding capability as well as their relatively high thermal capacity, which allow for a higher average operating temperature that increases power production. In this paper we test the compatibility of Flinak (LiF–NaF–KF) salts on ODS steels, comparing the performance of current generation ODS steels developed at Kyoto University with the commercial alloy MA956. Additionally, pure tantalum was also tested for comparative purposes. In situ data was obtained for temperatures ranging from 600 to 900 °C using a custom-built high temperature electrochemical impedance spectroscopy cell. Results for ODS steels show that steel/coolant interfacial resistance increases from 600 to 800 °C due to an aluminum enriched layer forming at the surface, however an increase in temperature to 900 °C causes this layer to break up and aggressive attack to occur. Performance of current generation ODS steels surpassed that of the MA956 ODS steel, with an in situ impedance behavior similar or better than that of pure tantalum.

36 MATERIALS SCIENCE↗

Thermodynamic Modeling and Experimental Study of the Fe-Cr-Zr System

Wide applications of zircaloys, stainless steels and their interactions in nuclear reactors require the knowledge on phase stability and thermodynamic property of the Fe-Cr-Zr system. This knowledge is also important to develop new Zr-contained Fe-Cr ferritic steels. This work aims at developing thermodynamic models for describing phase stability and thermodynamic property of the Fe-Cr-Zr system using the Calphad approach coupled with experimental study. Thermodynamic descriptions of the Fe-Cr and Cr-Zr systems were either directly adopted or slightly modified from literature. The Fe-Zr system has been remodeled to accommodate recent ab-initio calculation of formation enthalpies of various Fe-Zr compounds. Reliable ternary experimental data and thermodynamic models were mainly available in the Zr-rich region. Therefore, selected ternary alloys located in the vicinity of the eutectic valley of (Fe,Cr,Zr) and (Fe,Cr)2Zr laves phase in the Fe-rich region have been experimentally investigated in this study. Microstructure has been examined by using scanning electron microscope, energy-dispersive Xray spectroscopy and X-ray diffraction. These experimental results, along with the literature data were then used to develop thermodynamic models for phases in the Fe-Cr-Zr system. Calculated phase equilibria and thermodynamic properties of the ternary system yield satisfactory agreements with available experimental data, which gives the confidence to use these models as building blocks for developing a Zr, Fe and Cr contained multicomponent thermodynamic database for broader applications in nuclear reactors.

Yang, Ying↗