SEARCH · Engineering Papers

Results for “Displacement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

All sources NASA NTRS DOE OSTI

NASA NTRS1989

On the accuracy of shape sensitivity derivatives

Six methods for calculating shape sensitivity derivatives are compared for a two-material beam problem with a moving interface. It is found that as the finite-element mesh is refined, displacement sensitivity derivatives converge more slowly than the displacement themselves. Five of the methods agree fairly well, but the adjoint variational surface method provides substantially different results. However, the difference is found to reflect convergence from another direction to the same answer, rather than reduced accuracy.

Haftka, Raphael T.↗

NASA NTRS1990

Geodetic measurement of deformation in the Loma Prieta, California earthquake with very long baseline interferometry

VLBI measurements were conducted immediately after the Loma Prieta earthquake and compared with VLBI gathered at Monterey, San Francisco, and Point Reyes since 1983 to obtain preearthquake deformation rates with respect to a North American reference frame. The estimated displacements at Monterey and San Francisco are consistent with the static displacements predicted on the basis of a coseismic slip model in which slip on the southern segment is shallower than slip on the northern segment of the fault rupture. Cartesian positions are presented at epoch 1990.0 of a set of VLBI fiducial stations and the three mobile sites in the earthquake's vicinity.

Clark, T. A.↗

NASA NTRS1990

Direct measurements of skin friction in a scramjet combustor

A direction experimental measurement was made of the skin friction in the turbulent boundary layer of three-dimensional supersonic combustor flows. A floating element configuration was designed to detect two components of the small tangential shear forces due to the flow passing over a nonobtrusive instrument. A cantilevered sensing head extending from a very sensitive piezoresistive displacement transducer simultaneously measured displacement in the axial and transverse directions to the flow. The small overall deflection means that no self-nulling is required. Consistently repeatable output from the gage during testing show the skin friction with supersonic combustion is higher than for a corresponding noncombusting flow. The results are probably accurate to within 10 percent for the mean streamwise component.

Deturris, D. J.↗

NASA NTRS1989

Assessment of computational models for multilayered composite cylinders

A study is made of the effects of variation in the lamination and geometric parameters of multilayered composite cylinders on the accuracy of the static and vibrational responses predicted by eight modeling approaches, based on two-dimensional shear-deformation shell theories. The standard of comparison is taken to be the exact three-dimensional elasticity solutions, and the quantities compared include both the gross response characteristics and detailed, through-the-thickness, distributions of displacements, stresses and strain energy densities. Based on the numerical studies conducted, a predictor-corrector approach, used in conjunction with the first-order shear-deformation theory (with five displacement parameters in the predictor phase), appears to be the most effective among the eight modeling approaches considered. For multilayered orthotropic cylinders the response quantities obtained by the predictor-corrector approach are shown to be in close agreement with the exact three-dimensional elasticity solutions for a wide range of lamination and geometric parameters.

Noor, A. K.↗

NASA NTRS1990

A nonlinear optimization approach for disturbance rejection in flexible space structures

In this paper the design of an active control law for the rejection of persistent disturbances in large space structures is presented. The control system design approach is based on a deterministic model of the disturbances, with a model-based-compensator (MBC) structure, optimizing the magnitude of the disturbance that the structure can tolerate without violating certain predetermined constraints. In addition to closed-loop stability, the explicit treatment of state, control and control rate constraints, such as structural displacement, control actuator effort, and compensator time guarantees that the final design will exhibit desired performance characteristics. The technique is applied for the vibration damping of a simple two bay truss structure which is subjected to persistent disturbances, such as shuttle docking. Preliminary results indicate that the proposed control system can reject considerable persistent disturbances by utilizing most of the available control, while limiting the structural displacements to within desired tolerances. Further work, however, for incorporating additional design criteria, such as compensator robustness to be traded-off against performance specifications, is warranted.

Parlos, Alexander G.↗

NASA NTRS1990

Piezoelectrically forced vibrations of electroded doubly rotated quartz plates by state space method

The purpose of this investigation is to develop an analytical method to study the vibration characteristics of piezoelectrically forced quartz plates. The procedure can be summarized as follows. The three dimensional governing equations of piezoelectricity, the constitutive equations and the strain-displacement relationships are used in deriving the final equations. For this purpose, a state vector consisting of stresses and displacements are chosen and the above equations are manipulated to obtain the projection of the derivative of the state vector with respect to the thickness coordinate on to the state vector itself. The solution to the state vector at any plane is then easily obtained in a closed form in terms of the state vector quantities at a reference plane. To simplify the analysis, simple thickness mode and plane strain approximations are used.

Chander, R.↗

NASA NTRS1990

On the variation in crack-opening stresses at different locations in a three-dimensional body

Crack propagation and closure behavior of thin, and thick middle crack tension specimens under constant amplitude loading were investigated using a three dimensional elastic plastic finite element analysis of fatigue crack propagation and closure. In the thin specimens the crack front closed first on the exterior (free) surface and closed last in the interior during the unloading portion of cyclic loading; a load reduced displacement technique was used to determine crack opening stresses at specified locations in the plate from the displacements calculated after the seven cycle. All the locations were on the plate external surface and were located near the crack tip, behind the crack tip, at the centerline of the crack. With this technique, the opening stresses at the specified points were found to be 0.52, 0.42, and 0.39 times the maximum applied stress.

Chermahini, R. G.↗

NASA NTRS1991

Large Deformation Behavior of Long Shallow Cylindrical Composite Panels

An exact solution is presented for the large deformation response of a simply supported orthotropic cylindrical panel subjected to a uniform line load along a cylinder generator. The cross section of the cylinder is circular and deformations up to the fully snapped through position are investigated. The orthotropic axes are parallel to the generator and circumferential directions. The governing equations are derived using laminated plate theory, nonlinear strain-displacement relations, and applying variational principles. The response is investigated for the case of a panel loaded exactly at midspan and for a panel with the load offset from midspan. The mathematical formulation is one dimensional in the circumferential coordinate. Solutions are obtained in closed-form. An experimental apparatus was designed to load the panels. Experimental results of displacement controlled tests performed on graphite-epoxy curved panels are compared with analytical predictions.

Carper, Douglas M.↗

NASA NTRS1991

A method for the geometrically nonlinear analysis of compressively loaded prismatic composite structures

A method was developed for the geometrically nonlinear analysis of the static response of thin-walled stiffened composite structures loaded in uniaxial or biaxial compression. The method is applicable to arbitrary prismatic configurations composed of linked plate strips, such as stiffened panels and thin-walled columns. The longitudinal ends of the structure are assumed to be simply supported, and geometric shape imperfections can be modeled. The method can predict the nonlinear phenomena of postbuckling strength and imperfection sensitivity which are exhibited by some buckling-dominated structures. The method is computer-based and is semi-analytic in nature, making it computationally economical in comparison to finite element methods. The method uses a perturbation approach based on the use of a series of buckling mode shapes to represent displacement contributions associated with nonlinear response. Displacement contributions which are of second order in the model amplitudes are incorported in addition to the buckling mode shapes. The principle of virtual work is applied using a finite basis of buckling modes, and terms through the third order in the model amplitudes are retained. A set of cubic nonlinear algebraic equations are obtained, from which approximate equilibrium solutions are determined. Buckling mode shapes for the general class of structure are obtained using the VIPASA analysis code within the PASCO stiffened-panel design code. Thus, subject to some additional restrictions in loading and plate anisotropy, structures which can be modeled with respect to buckling behavior by VIPASA can be analyzed with respect to nonlinear response using the new method. Results obtained using the method are compared with both experimental and analytical results in the literature. The configurations investigated include several different unstiffened and blade-stiffening panel configurations, featuring both homogeneous, isotropic materials, and laminated composite material.

Stoll, Frederick↗

NASA NTRS1991

Fiber optic sensing system

A fiber optic interferometer utilizes a low coherence light emitting diode (LED) laser as a light source which is filtered and driven at two RF frequencies, high and low, that are specific to the initial length of the resonator chamber. A displacement of a reflecting mirror changes the length traveled by the nonreferencing signal. The low frequency light undergoes destructive interference which reduces the average intensity of the wave while the high frequency light undergoes constructive interference which increases the average intensity of the wave. The ratio of these two intensity measurements is proportional to the displacement incurred.

Adamovsky, Grigory↗

NASA NTRS1991

Development and verification of global/local analysis techniques for laminated composites

A two-dimensional to three-dimensional global/local finite element approach was developed, verified, and applied to a laminated composite plate of finite width and length containing a central circular hole. The resulting stress fields for axial compression loads were examined for several symmetric stacking sequences and hole sizes. Verification was based on comparison of the displacements and the stress fields with those accepted trends from previous free edge investigations and a complete three-dimensional finite element solution of the plate. The laminates in the compression study included symmetric cross-ply, angle-ply and quasi-isotropic stacking sequences. The entire plate was selected as the global model and analyzed with two-dimensional finite elements. Displacements along a region identified as the global/local interface were applied in a kinematically consistent fashion to independent three-dimensional local models. Local areas of interest in the plate included a portion of the straight free edge near the hole, and the immediate area around the hole. Interlaminar stress results obtained from the global/local analyses compares well with previously reported trends, and some new conclusions about interlaminar stress fields in plates with different laminate orientations and hole sizes are presented for compressive loading. The effectiveness of the global/local procedure in reducing the computational effort required to solve these problems is clearly demonstrated through examination of the computer time required to formulate and solve the linear, static system of equations which result for the global and local analyses to those required for a complete three-dimensional formulation for a cross-ply laminate. Specific processors used during the analyses are described in general terms. The application of this global/local technique is not limited software system, and was developed and described in as general a manner as possible.

Thompson, Danniella Muheim↗

NASA NTRS1991

Update on results of SPRE testing at NASA Lewis

The Space Power Research Engine (SPRE), a free-piston Stirling engine with a linear alternator, is being tested at NASA Lewis Research Center as part of the Civilian Space Technology Initiative (CSTI) as a candidate for high capacity space power. Results are presented from recent SPRE tests designed to investigated the effects of variation in the displacer seal clearance and piston centering port area on engine performance and dynamics. The impact of these variations on PV power and efficiency are presented. Comparisons of the displacer seal clearance tests results with HFAST code predictions show good agreement for PV power, but show poor agreement for PV efficiency. Correlations are presented relating the piston midstroke position to the dynamic Delta P across the piston and the centering port area. Test results indicate that a modest improvement in PV power and efficiency may be realized with a reduction in piston centering port area.

Cairelli, James E.↗

NASA NTRS1991

Control of helicopter rotorblade aerodynamics

The results of a feasibility study of a method for controlling the aerodynamics of helicopter rotorblades using stacks of piezoelectric ceramic plates are presented. A resonant mechanism is proposed for the amplification of the displacements produced by the stack. This motion is then converted into linear displacement for the actuation of the servoflap of the blades. A design which emulates the actuation of the servoflap on the Kaman SH-2F is used to demonstrate the fact that such a system can be designed to produce the necessary forces and velocities needed to control the aerodynamics of the rotorblades of such a helicopter. Estimates of the electrical power requirements are also presented. A Small Business Innovation Research (SBIR) Phase 2 Program is suggested, whereby a bench-top prototype of the device can be built and tested. A collaborative effort between AEDAR Corporation and Kaman Aerospace Corporation is anticipated for future effort on this project.

Fabunmi, James A.↗

NASA NTRS1989

Assessment of shear deformation theories for multilayered composite plates

A review is made of the different approaches used for modeling multilayered composite plates. Discussion focuses on different approaches for developing two-dimensional shear deformation theories; classification of two-dimensional theories based on introducing plausible displacement, strain and/or stress assumptions in the thickness direction; and first-order shear deformation theories based on linear displacement assumptions in the thickness coordinate. Extensive numerical results are presented showing the effects of variation in the lamination and geometric parameters of simply supported composite plates on the accuracy of the static and vibrational responses predicted by six different modeling approaches (based on two-dimensional shear deformation theories). The standard of comparison is taken to be the exact three-dimensional elasticity solutions. Some of the future directions for research on the modeling of multilayered composite plates are outlined.

Noor, Ahmed K.↗

NASA NTRS1990

Assessment of computational models for multilayered composite shells

A review is made of the different approaches used for modeling multilayered composite shells. Discussion focuses on different approaches for developing two-dimensional shear deformation theories; classification of two-dimensional theories based on introducing plausible displacement, strain and/or stress assumptions in the thickness direction; first-order shear deformation theories based on linear displacement assumptions in the thickness coordinate; and efficient computational strategies for anisotropic composite shells. Extensive numerical results are presented showing the effects of variation in the lamination and geometric parameters of simply supported composite cylinders on the accuracy of the static and vibrational responses predicted by eight different modeling approaches (based on two-dimensional shear deformation theories).

Noor, Ahmed K.↗

NASA NTRS1990

Inviscid-viscous interaction on triple-deck scales in a hypersonic flow with strong wall cooling

The influence of wall temperatures on the flow structure in a region near a laminar separation is presently studied on the triple-deck scales, for the case of a high supersonic flow's inviscid-viscous interactions. A critical wall-temperature range is identified whose lower deck pressure-displacement relation departs from that of the classical formulation; below it, the pressure-displacement relation undergoes still greater transformations in conjunction with drastic scale-changes in the triple deck. The reduced lower-deck problem falls into supercritical, transcritical, and subcritical domains. A computational study is conducted for the compressive free-interaction solutions, and solutions are obtained for a sharp-corner ramp in the three wall-temperature ranges.

Brown, S. N.↗

NASA NTRS1990

Interfacial sliding near a free surface in a fibrous or layered composite during thermal cycling

This paper presents a simple shear lag model of interfacial sliding at a free surface in a layered or continuous fiber composite. The interface is characterized by a critical interfacial shear stress, tau0, which might represent the critical stress for frictional sliding at a weakly bonded interface, or the shear flow stress of a thin ductile interface layer at a well bonded interface. The history, during heating and cooling, of the relative normal displacement of the reinforcing inclusions and the matrix on a free surface cut normal to the inclusions is calculated and shown to depend on both the absolute value and the temperature dependence of tau0, as well as on the magnitudes of the bulk residual stresses. The variety of possible displacement histories suggests that they are a rich source of information about tau0 and the residual stresses.

Cox, B. N.↗

NASA NTRS1991

Unsteady vortex-dominated flow around wings with oscillating leading-edge flaps

Unsteady vortex-dominated flow around delta wings with oscillating leading-edge flaps represents an important classs of problems for supermaneuverability and flow control of advanced aircraft. The problem is solved using time accurate integration of the unsteady, compressible, thin-layer Navier-Stokes equations in conjunction with the unsteady, linearized, Navier-displacement equations. Starting with an initial configuration of the wing and its flaps, the Navier-Stokes equations are solved on an initial structured grid for the steady flow. The forced oscillation of the flaps is then applied, and the problem is solved accurately in time. The Navier-displacement equations are solved for the grid deformation and the Navier-Stokes equations are solved for the flowfield. Symmetric and anti-symmetric flaps oscillations are presented to study the effect of the flaps oscillation on the leading-edge vortical flow.

Kandil, Osama A.↗